PY7PM-0210GSM/UMTS/HSPA Mobile Phone with WLAN, BT, RFID and ANT+

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen

SONY Sony Mobile Communications SE 221 88 LUND· SWEDEN Confidentiality Request 2012-07-04 CGQBDA12:262 SEMC/CGQBDA Afrah Sadiq +46108012250 Receiver Federal Communications Commission Subject: Request for Confidentiality FCC 10: PY7PM-0210 To Whom It May Concern: In accordance with §0.459 of CFR 47, Sony Mobile Communications AB requests confidentiality for the below listed items for our Sony mobile phone type PM-0210-BV, FCC 10: PY7PM-0210: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational/Technical Descriptions These items contain detailed system and equipment description and related information about the product which Sony Mobile Communications AB considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Mobile Communications AB also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Best Regards, ---- ~? ~--. I Afrah Sadiq Staff Verif icatioP Engi eer Global Type i\oproval Sony Mobile Communications Nya Vattenlornet 221 88 Lund. Sweden Fax: +46 to 80 02441 ~.y'm9bile,C()11J. Sony Mobile Communications Styrelsens sate: Lund Momsnr' l(ATNo' SE556615665801 Reg/stared office: Lund Organisafionsnr' Reg No; 556615-6658 Postadress Mail 8esdksadress • Office address Telefon • Telephone Tefefax· Telelax SE·221 88 Lund Nya Vattentomet Nat 010-80 00000 Nat 010-8002040 Sweden Lund In\ +46 10 80 00000 Int +46 lOBO 02040

Test Report No.: 1-4254/12-37-06 2012-06-27 Page 22 of 39 An nex B External ph ot ogra phs o f the E UT Photo documentation: Photo 1: Photo 2: Test Report No.: 1-4254/12-37-06 2012-06-27 Page 23 of 39 Photo 3: Photo 4: Test Report No.: 1-4254/12-37-06 2012-06-27 Page 24 of 39 Photo 5: Photo 6:

1(3) Document number Revision 1265-2334Uen 1 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Leif Hedin 2012-06-07 Contents responsible if other than preparerRemarks Reference Approved by SEM/CGOVDPLG, Leif Hedin LT26w, Mobile Phone label, ROW, made in... 1 General information MLCI= Main Label Content Information Document 2 Printing information Content Format Line 1a (2,0/4,0) Model Name “LT26w” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 1b (2,0/11,0) Actual electronic serial number (IMEI) of the mobile phone, “00000000-000000-0” Text, height 1,2 mm. In the format TAC-SNR-CD. TAC and SNR derived from pos 500 in BOM. CD = check digit according to the Luhn formula (ISO/IEC 7812), GSM 02.16. Line 2a (3,5/3,5) “TYPE: PM-0210-BV” Text, height 1,2 mm. According to Chapter 1 in MLCI. Line 2b (3,5/20,5) HW & SW identification field, if applicable; “EFF” Text, height 1,2 mm. According to Type-testing report under Product Model Specifying Documents Line 3 (5,5/2,5) Product number of the Sales Item in which the phone is packed, if applicable. “SI XXXX-XXXX” Text, height 1,2 mm. Line 4 (7,0/37,3) Line 1b in 2D-bar code, just digits, 15 characters. The bar code contains IMEI-number Data Matrix; x-dimension 0,41 mm. Symbol type ECC 200.Code type for USA and Western Europe (7-pieces, ACII). NB – the 2D bar code needs quiet zoon for 1 mm around the whole bar code. Height of barcode 6,4 mm Line 5 (12,5/31,5) Marking of origin; “Made in Xxx” “Xxx” = actual country of production of the included telephone, in English Text, height 1,2 mm. Mobile Phone label part no  1253-4855 Mobile Phone label content part no  1265-2333 Bar code  Print quality: according to COSMETIC GUIDELINE – Bar code labels document 1222-6072 Uen  Quiet zone: No bar codes are allowed to be closer to a label edge than 2 mm! Text If applicable, or nothing else specified, Zebra printer Scaleable Smooth Font CG Triumvirate Bold Condensed is imposed. When needed, the text is adjusted to fit the label. Coordinates “(x/y)” under each line number specifies the bottom / left alignment for text, graphics and bar codes, x is measured vertically, and y horizontally from the upper left corner of the label (landscape format), both in mm. When needed, the alignment is adjusted to fit the label. 2(3) Document number Revision 1265-2334Uen 1 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Leif Hedin 2012-06-07 Contents responsible if other than preparerRemarks Reference Approved by SEM/CGOVDPLG, Leif Hedin 3 Layout The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be considered as specifications, but as an additional help for setting up the label. 3.1 Conceptual picture double underlined = major changes since last revision. 3(3) Document number Revision 1265-2334Uen 1 Sony Mobile Communications AB Prepared by Date SEM/CGOVDPLG, Leif Hedin 2012-06-07 Contents responsible if other than preparerRemarks Reference Approved by SEM/CGOVDPLG, Leif Hedin

2012-06-27 Page 1 of 39 TEST REPORT 1-4254/12-37-06 Testing Laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom-ict.de e-mail: [email protected] Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications Sony Mobile Communications AB Nya Vattentornet 22188 Lund/SWEDEN Phone: +46 46 19 30 00 Fax: +46 46 19 32 95 Contact: Håkan Sjöberg e-mail: [email protected] Phone: +46 46 19 35 59 Manufacturer Sony Mobile Communications AB Nya Vattentornet 22188 Lund/SWEDEN Test Standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio frequency devices RSS - Gen Issue 3 General Requirements and Information for the Certification of Radiocommunication Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM Mobile Phone GPRS/EGPRS; UMTS; HSPA; LTE; BT3.1 Model name: PM-0210-BV Frequency [MHz]: GSM: 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz UMTS: 826.4 – 846.6 MHz, 1852.4 – 1907.6 MHz Technology tested: GSM, UMTS Antenna: Integrated antenna Power Supply: 3.7 V DC by Li-polymer battery Temperature Range: -/-°C to -/- °C Test report authorised: Test performed: 2012-06-27 Stefan Bös 2012-06-27 Andreas Luckenbill Senior Testing Manager Test Report No.: 1-4254/12-37-06 2012-06-27 Page 2 of 39 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General Information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test Environment ........................................................................................................................................... 4 5 Test item .......................................................................................................................................................... 4 6 Test Laboratories sub-contracted ................................................................................................................ 4 7 Summary of Measurement Results .............................................................................................................. 5 7.1 Receiver ................................................................................................................................................ 5 8 Measurement Results .................................................................................................................................... 6 8.1 RX Spurious Emissions Conducted < 30 MHz ................................................................................. 6 8.2 Spurious Emissions Radiated – Receiver Mode .............................................................................. 9 9 Test equipment and ancillaries used for tests .......................................................................................... 16 10 Observations ......................................................................................................................................... 17 Annex A Photographs of the test setup ...................................................................................................... 18 Annex B External photographs of the EUT ................................................................................................. 22 Annex C Internal photographs of the EUT .................................................................................................. 25 Annex D Document history .......................................................................................................................... 38 Annex E Further information ........................................................................................................................ 38 Annex F Accreditation Certificate ............................................................................................................... 39 Test Report No.: 1-4254/12-37-06 2012-06-27 Page 3 of 39 2 General Information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General Terms and Conditions for CETECOM ICT Services GmbH". CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or warrant…

Text truncated - open the document above for the full version.

Test Report No.: 1-4254/12-37-06 2012-06-27 Page 18 of 39 An nex A Pho tog raphs o f t h e test se tu p Photo documentation: Photo 1: Photo 2: Test Report No.: 1-4254/12-37-06 2012-06-27 Page 19 of 39 Photo 3: Photo 4: Test Report No.: 1-4254/12-37-06 2012-06-27 Page 20 of 39 Photo 5: Photo 6: Test Report No.: 1-4254/12-37-06 2012-06-27 Page 21 of 39 Photo 7: