PY7PM-0700Cellular/ PCS GSM/ EDGE/ WCDMA Phone with WLAN, Bluetooth, RFID and ANT+

Preface Thank you for buying "Xperia TM Z Ultra" (simply called the "product" from here on). Before using the product, read "Basic Manual" (this manual) and " (Full Instruction Manual)" (Japanese) to ensure safe use and handling. About Operating Instructions Basic Manual (this manual) Handles only basic operations for main features. For detailed descriptions on various functions, refer to the "Instruction Manual" (Japanese) application installed on the product or " (Full Instruction Manual) (Japanese)" available on the au homepage. http://www.au.kddi.com/support/mobile/guide/manual/ Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies. The TM, ® marks may be omitted in this manual. "Instruction Manual" (Japanese) application This product allows you to use the "Instruction Manual" (Japanese) application on the product to confirm detailed operational procedures. Certain functions can be directly activated from the application screens on which their operations are described. From the Home screen, []X[Basic Manual] (Japanese) When you activate for the first time, follow the onscreen instructions to download and install application. For Those Requiring an English Instruction Manual You can download the English version of the Basic Manual from the au website (available from approximately one month after the product is released). Download URL: http://www.au.kddi.com/support/mobile/ guide/manual/ Safety Precautions Before you start using the product, make sure to read the "Cautions on using Xperia TM Z Ultra" to ensure correct use. Before you assume that the product is malfunctioning, check for possible remedies in the following au Customer Support site of au homepage: http://www.au.kddi.com/support/mobile/trouble/repair When using the product Communication is not possible even inside the service area in places where the signal does not reach (e.g. tunnels and basements). Also, communication is sometimes not possible in poor reception areas. Communication is sometimes interrupted if you move into a poor reception areas during communications. Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated (Though LTE/CDMA/GSM/UMTS system has highly secure confidential communication features). This product is compatible with the international roaming service. Each network service described in this manual varies depending on the area and service content. For details, refer to the "Instruction Manual" (Japanese) application installed on the product or " (Full Instruction Manual)" (Japanese) available on the au homepage. Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law. The IMEI information of the cell phone is automatically sent to KDDI CORPORATION for maintenance and monitoring operational status of your cell phone. Take care not to inconvenience people around you when you use the product in a public place. Before you start using the product overseas, check the relevant laws and regulations of the country/region you visit. When the product is used by a child, parents or guardians should thoroughly read the "Basic Manual" "Cautions on using Xperia TM Z Ultra" and "Specific Absorption Rate (SAR) of cell phones" and teach the child how to use it. Use of the product is not allowed in the following places! Do not use a cell phone while driving a car or riding a motorbike or bicycle. Failure to do so might cause a traffic accident. Use of a cell phone while driving a car or motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations. Do not use this product while you are aboard an airplane. Use of electric devices transmitting radio waves in airplane is prohibited by law. Some airline companies, however, allow their passengers to use cell phones. For details, contact the airline company you use. Regarding notations used in this document In this manual, keys (key icons) are represented by simplified illustrations such as x, y, r, P, k. Operations of tapping menu items/icons/buttons on the screen etc. are indicated as [(name of the item etc.)]. Screen illustrations shown in this manual may look different from the actual screens. In some cases, minor details or a part of a screen may be omitted. In this manual, "microSD TM memory card", "microSDHC TM memory card" and "microSDXC TM memory card" are abbreviated as "microSD memory card" or "microSD". "The Company" as appears on the product refers to the following companies: Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: Sony Mobile Communications Inc. Using au (au Disaster Countermeasure) You can use (Disaster Message Board) service, (Emergency Rapid Mail) service that distributes (Earthquake Early Warning), (Disaster and Evacuation Information) and (Tsunami Warning), and (Disaster Voice Messaging Service). 1From the Home screen, [au (au Disaster Countermeasure)] au (au Disaster Countermeasure) menu appears. Using (Disaster Message Board) Disaster Message Board service enables you to register information of well-being from an area of distress via LTE NET in case of large-scale disaster such as earthquake with a seismic intensity of over 6 lower. 1au (au Disaster Countermeasure) menuX[ (Disaster Message Board)] ❖Information To register information of well-being, E-mail address (ezweb.ne.jp) is required. Set up E-mail address beforehand. Using (Emergency Rapid Mail) Emergency Rapid Mail is a service that distributes Earthquake Early Warning or Tsunami Warning delivered from the meteorological bureau or Disaster and Evacuation Information delivered from the government or local public organization to all au cell phones in specified areas simultaneously. When you receive Earthquake Early Warning, ensure your safety and take proper action according to t…

Text truncated - open the document above for the full version.

SAR Information FCC Statement Declaration of Conformity Sony SOL24 Important Information Unite d States & Canada THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The SOL24 Series mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the Important Information chapter in the User Guide. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is 1.111 W/kg*, and when worn on the body is 1 .054 W/kg*. For body-worn o p eration, the phone has been tested when positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when properly used with an appropriate accessory and worn on the body. For devices which include “WiFi hotspot” functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm. Use of third-party 2 accessories may result in different SAR levels than those reported. **Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http://transition.fcc.gov/oet/ea/fccid after searching on FCC ID PY7PM-0700. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at http://www.emfexplained.info/. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements. **This paragraph is only applicable to authorities and customers in the United States. 3 FCC Statement Th i s device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 10 Declaration of Conformity for SOL24 We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type PM-0700-BV and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 301 511:V9.0.2, EN 301 489-7:V1.3.1, EN 301 908-1:V5.2.1, EN 301 908-2:V5.2.1, EN 301 893:V1.7.1, EN 301 908-13:V5.2.1, EN 301 489-24:V1.5.1, EN 300 440-2:V1.4.1, EN 301 489-3:V1.4.1, EN 300 328:V1.8.1, EN 301 489-17:V2.2.1, EN 302 291-2:V1.1.1, EN 62 209-1:2006, EN 62 209-2:2010 and EN 60 950-1:2006+A11:2009+A1:2010+A12:2011 following the provisions of, Radio Equipment and Telecommunication Terminal Equipment directive 1999/5/EC. Lund, November 2013 Pär Thuresson, Quality Office r, SVP, Quality & Customer Services 18 www.sonymobile.com Sony Mobile Communications AB SE-221 88 Lund, Sweden

Sony Mobile Communications Confidential LETTER 1(1) Document number Revision 272/0061-LXE 110 0790 Uen A Prepared by Date SEM/CGQTAD RAZVAN BUJILA 2013-10-31 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by SEM/CGQTAD (RAZVAN BUJILA) It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Telecommunication Certification Body PCTEST Engineering Laboratory Inc. 6660-B Dobbin Road Columbia MD 21045 USA To whom it may concern This is to certify that Sony Mobile Communications AB authorizes PCTEST to act as Telecommunication Certification Body on our behalf for the FCC application of our mobile phone, FCC ID: PY7PM-0700. We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Yours sincerely Razvan Bujila Global Type Approval Sony Mobile Communications Tel: +46 10 801 53 23 Mobilvägen 10, SE-221 88 Lund, Sweden [email protected]

Sony Mobile Communications Confidential LETTER 1(1) Document number Revision 273/0061-LXE 110 0790 Uen A Prepared by Date SEM/CGQTAD RAZVAN BUJILA 2013-10-31 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by SEM/CGQTAD (RAZVAN BUJILA) It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Telecommunication Certification Body PCTEST Engineering Laboratory Inc. 6660-B Dobbin Road Columbia MD 21045 USA Subject: Certification Application FCC ID: PY7PM-0700 It is requested that the following information is to be held confidential on behalf of Sony Mobile Communications AB pursuant to FCC Rules Parts 0.457 and 0.459:  Block Diagrams  Schematics  Parts List  Tune Up Information  Operation Description These items contain detailed system and equipment description and related information about the product which Sony Mobile Communications AB considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Sony Mobile Communications AB also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Please contact the undersigned if there are any further questions or additional information needed in this matter. Yours sincerely Razvan Bujila Global Type Approval Sony Mobile Communications Tel: +46 10 801 53 23 Mobilvägen 10, SE-221 88 Lund, Sweden [email protected]

Sony Mobile Communications Confidential LETTER 1(1) Document number Revision 274/0061-LXE 110 0790 Uen B Prepared by Date SEM/CGQTAD RAZVAN BUJILA 2013-11-20 Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by SEM/CGQTAD (RAZVAN BUJILA) It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Telecommunication Certification Body PCTEST Engineering Laboratory Inc. 6660-B Dobbin Road Columbia MD 21045 USA Subject: Certification Application FCC ID: PY7PM-0700 In accordance with §0.459 of CFR 47 and Public Notice DA 04-1705, Sony Mobile Communications AB requests in addition to Confidentiality Request 273/0061-LXE 110 0790 temporary confidentiality until 2014-04-20 of the below listed items for our mobile phone, FCC ID PY7PM-0700: User manual Test setup photos External photos Internal photos These items contain proprietary information related to the design of the product which has not yet been released to the market. The public disclosure of this information prior to public launch may be harmful to Sony Mobile Communications AB and provide unjust benefits to its competitors. A period up to 2014-04-20 is requested to protect this information before formal market launch. If the launch date is re-scheduled to be earlier than 2014-04-20 Sony Mobile communications AB will inform again to cancel this restriction. Please contact the undersigned if there are any further questions or additional information needed in this matter. Yours sincerely Razvan Bujila Global Type Approval Sony Mobile Communications Tel: +46 10 801 53 23 Mobilvägen 10, SE-221 88 Lund, Sweden [email protected]

SONY MOBILE FCC ID: PY7PM-0700 External Photos EUT Type: Portable Handset Page 1 of 3 © 2013 PCTEST Engineering Laboratory Inc. EXTERNAL PHOTOGRAPHS SONY MOBILE FCC ID: PY7PM-0700 External Photos EUT Type: Portable Handset Page 2 of 3 © 2013 PCTEST Engineering Laboratory Inc. SONY MOBILE FCC ID: PY7PM-0700 External Photos EUT Type: Portable Handset Page 3 of 3 © 2013 PCTEST Engineering Laboratory Inc.

Confidential PROJECT REPORT 1(1) Document number Revision SEM/CVGAERB GAVIN HAN9/0362-1/FCP 119 1010/1 Uen A Prepared by Date SHIGERU, IWASAKI SEM/CVGAERB GAVIN HAN Contents responsible if other than preparer Remarks This document is managed in metaDoc. Approved by TAKEFUMI MASUDA the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Applies to FCC ID: PY7PM-0700 Marking Drawing - PY7PM-0700 The FCC ID is placed on a none removable label tray according to below picture

SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 1 of 6 © 2013 PCTEST Engineering Laboratory Inc. INTERNAL PHOTOGRAPHS SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 2 of 6 © 2013 PCTEST Engineering Laboratory Inc. SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 3 of 6 © 2013 PCTEST Engineering Laboratory Inc. SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 4 of 6 © 2013 PCTEST Engineering Laboratory Inc. SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 5 of 6 © 2013 PCTEST Engineering Laboratory Inc. SONY MOBILE FCC ID: PY7PM-0700 Internal Photos EUT Type: Portable Handset Page 6 of 6 © 2013 PCTEST Engineering Laboratory Inc.

FCC ID: PY7PM-0700 Document S/N: Tes t Dates: 0Y1310142006-R1.PY7 10/14/13 © 2013 PCTEST Engineering Laboratory, Inc. Applicant Name: Sony Mobile Communications AB Nya Vattentornet SE-221 88, Lund Sweden F C C I D : AP P L I C AN T : DUT Type: Application Type: FCC Rule Part(s): Type Number: Note: Powers in the above table represent output powers for the SAR test configurations and may not represent the highest out powers for all configurations for each mode Not e: This revised Test Report (S/N: 0Y1310142006 same subject EUT for the same type of testing as indicated. Please discard or destroy the previously issued test report (S/N 0Y1310142 006.PY7) and dispose of it accordingly. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure lim with the measurement procedures specified in I attest to the accuracy of data. All measurements reported herein were performed by me or were made und are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements vouch for the qualificatio ns of all persons taking them. PCEGSM/GPRS/EDGE 850 PCEUMTS 850 PCEGSM/GPRS/EDGE 1900 1850.20 - 1909.80 MHz PCEUMTS 1900 DTS2.4 GHz WLAN DTS5.8 GHz WLAN NII5.2 GHz WLAN NII5.3 GHz WLAN NII5.5 GHz WLAN DSS/DTSBluetooth Band & Mode Simultaneous SAR per KDB 690783 D01v01r02: Equipment Class PCTEST ENGINEERING LABORATORY, INC. SAR EVALUATION REPORT t Dates: DUT Type: 10/14/13 - 11/01/13 Portable Handset Date of Testing: Sony Mobile Communications AB 10/14/13 - 11/01 /13 Test Site/Location: PCTEST Lab, Columbia, MD, USA Document Serial No.: 0Y1310142006- R1 P Y7 P M-0 7 0 0 S O N Y MO BI LE C O MM UN IC AT IO NS AB Portable Handset Certification CFR §2.1093 PM-0700-BV Note: Powers in the above table represent output powers for the SAR test configurations and may not represent the highest out configurations for each mode . e: This revised Test Report (S/N: 0Y1310142006 - R1.PY7) supersedes and replaces the previously issued test report on the same subject EUT for the same type of testing as indicated. Please discard or destroy the previously issued test report (S/N 006.PY7) and dispose of it accordingly. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure lim its specified in ANSI/IEEE C95.1-1992 and has with the measurement procedures specified in Section 1.9 of this report ; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made und are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements ns of all persons taking them. Test results reported herein relate only to the item(s) tested 1 gm Head (W/kg) 1 gm Body-Worn (W/kg) 824.20 - 848.80 MHz33.270.310.38 826.40 - 846.60 MHz24.010.390.41 1850.20 - 1909.80 MHz 30.580.110.44 1852.4 - 1907.6 MHz23.370.160.88 2412 - 2462 MHz14.980.64< 0.1 5745 - 5825 MHz13.240.770.10 5180 - 5240 MHz12.931.050.12 5260 - 5320 MHz13.131.110.15 5500 - 5700 MHz13.150.760.12 2402 - 2480 MHz7.75 1.361.03 Tx Frequency Measured Conducted Power [dBm] Simultaneous SAR per KDB 690783 D01v01r02: SAR N/A PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.pctestlab.com SAR EVALUATION REPORT Reviewed by: Quality Manager Page 1 of 54 REV 12.5 M 05/20/2013 /13 Test Site/Location: PCTEST Lab, Columbia, MD, USA Serial No.: R1 .PY7 AT IO NS AB Note: Powers in the above table represent output powers for the SAR test configurations and may not represent the highest out put R1.PY7) supersedes and replaces the previously issued test report on the same subject EUT for the same type of testing as indicated. Please discard or destroy the previously issued test report (S/N : This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for and has been tested in accordance ; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made und er my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and item(s) tested . 1 gm Hotspot (W/kg) 10 gm Extremity (W/kg) 1.05-1.00 0.75-1.00 0.842.88 0.83-1.00 0.14-1.00 -1.000.21 -1.000.16 -1.000.25 -1.000.21 1.193.12 SAR N/A PCTEST ENGINEERING LABORATORY, INC. FCC ID: PY7PM-0700 Document S/N: Tes t Dates: 0Y1310142006-R1.PY7 10/14/13 © 2013 PCTEST Engineering Laboratory, Inc. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST 2 INTRODUCTION ................................ 3 DOSIMETRIC ASSESSMEN 4 DEFINITION OF REFERE 5 TEST CONFIGURATION P 6 RF EXPOSURE LIMITS 7 FCC MEASUREMENT PROC 8 RF CONDUCTED POWERS 9 SYSTEM VERIFICATION 10 SAR DATA SUMMARY 11 FCC MULTI- TX AND ANTENNA SAR C 12 SAR MEASUREMENT VARI 13 EQUIPMENT LIST ................................ 14 MEASUREMENT UNCERTAI 15 CONCLUSION ................................ 16 REFERENCES ................................ APPENDIX A: SAR TEST PLOTS APPENDIX B: SAR DIPOLE VERIFICATION PLOTS APPENDIX C: PROBE AND DIPOLE CALIBRATION CERTIFICATES APPENDIX D: SAR TISSUE SPECIFICATIONS APPENDIX E: SAR SYSTEM VALIDATION APPENDIX F: SAR TEST SETUP PHOTOGRAPHS SAR EVALUATION REPORT t Dates: DUT Type: 10/14/13 - 11/01/13 Portable Handset T A B L E O F C O N T E N T S DEVICE UNDER TEST ................................................................ ................................ ................................ ................................ ................................ DOSIMETRIC ASSESSMEN T ................................................................ ................................…

Text truncated - open the document above for the full version.

FCC ID: PY7PM-0700 FCC Pt. 15.407 802.11a/n/ac UNII MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 90 0Y1310142010.PY7 10/28 - 11/1/2013 Portable Handset © 2013 PCTEST Engineering Laboratory, Inc. V 2.3 05/07/2013 Applicant Name: Date of Testing: Sony Mobile Communications 10/28 - 11/1/2013 Nya Vattentornet Test Site/Location: SE-221 88, Lund PCTEST Lab, Columbia, MD, USA Sweden Test Report Serial No.: 0Y1310142010.PY7 FCC ID: PY7PM-0700 APPLICANT: Sony Mobile Communications Application Type: Certification Type Number: PM-0700-BV EUT Type: Portable Handset FCC Classification: Unlicensed National Information Infrastructure (UNII) FCC Rule Part(s): Part 15.407 Test Procedure(s): KDB 789033 v01r03, KDB 644545 v01r01 Max. Power (mW) Max. Power (dBm) 1205180 - 524019.81512.97 2205260 - 532020.55913.13 3205500 - 570020.74913.17 1205180 - 524013.90011.43 2205260 - 532014.42111.59 3205500 - 570014.02811.47 1405190 - 523013.77211.39 2405270 - 531013.06211.16 3405510 - 567011.64110.66 180521012.24610.88 280529010.35110.15 380553010.66610.28 802.11ac 802.11n Channel Bandwidth (MHz) 802.11a 802.11n Conducted Power Mode Tx Frequency (MHz) UNII Band This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB 789033 v01r03 and KDB 644545 v01r01. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC PART 15.407 (UNII) FCC ID: PY7PM-0700 FCC Pt. 15.407 802.11a/n/ac UNII MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 90 0Y1310142010.PY7 10/28 - 11/1/2013 Portable Handset © 2013 PCTEST Engineering Laboratory, Inc. V 2.3 05/07/2013 TABLE OF CONTENTS FCC PART 15.407 MEASUREMENT REPORT .................................................................................................. 3 1.0 INTRODUCTION ...................................................................................................................................... 4 1.1 SCOPE ........................................................................................................................................................... 4 1.2 PCTEST TEST LOCATION ............................................................................................................................ 4 2.0 PRODUCT INFORMATION ..................................................................................................................... 5 2.1 EQUIPMENT DESCRIPTION......................................................................................................................... 5 2.2 DEVICE CAPABILITIES ................................................................................................................................. 5 2.3 TEST CONFIGURATION ............................................................................................................................... 5 2.4 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ...................................................................................... 5 2.5 LABELING REQUIREMENTS ........................................................................................................................ 5 3.0 DESCRIPTION OF TEST ........................................................................................................................ 6 3.1 EVALUATION PROCEDURE ......................................................................................................................... 6 3.2 AC LINE CONDUCTED EMISSIONS ............................................................................................................. 6 3.3 RADIATED EMISSIONS ................................................................................................................................ 7 4.0 ANTENNA REQUIREMENTS .................................................................................................................. 8 5.0 TEST EQUIPMENT CALIBRATION DATA .............................................................................................. 9 6.0 TEST RESULTS .................................................................................................................................... 10 6.1 SUMMARY ................................................................................................................................................... 10 6.2 26DB BANDWIDTH MEASUREMENT – 802.11A/N/AC .............................................................................. 11 6.3 UNII OUTPUT POWER MEASUREMENT – 802.11A/N/AC ........................................................................ 29 6.4 PEAK POWER SPECTRAL DENSITY – 802.11A/N/AC .............................................................................. 32 6.5 PEAK EXCURSION RATIO – 802.11A/N/AC ............................................................................................... 48 6.6 FREQUENCY STABILITY ....................................................…

Text truncated - open the document above for the full version.