PZWBHT1200QU2D Code Handy Terminal

ＢＨＴ-12００ Series Operator’s Guide 2D Code Handy Terminal BHT-1281QULWB-CE Thank you for using the DENSO WAVE 2D Code Handy Terminal. Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading. This manual contains only the basic details required for operation. Please refer to the User’s Manual for further details on general operation. The User’s Manual can be downloaded free of charge from the DENSO WAVE Web site (QBdirect). http://www.qbdirect.net/ 496487-XXXX Some of th e pixels on the LCD touch screen may not illuminate or stay permanently illuminated. Furthermore, there may also be inconsistencies in color and brightness. None of these aspects represent an LCD defect. A thin Newton’s ring (rainbow-like patterns) may appear on the touch panel. This does not necessarily indicate a problem with the touch panel. About This Manual  Due to changes and improvements, the content of this manual may be subject to change without prior notice.  The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.  Please contact DENSO WAVE if this manual is lost.  Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we kindly ask you to report any questionable descriptions, mistakes or omissions, if any, to DENSO WAVE. Liability Limitations  DENSO WAVE INCORPORATED (“DENSO WAVE”) does not assume any product liability (including damages for lost profits, interruption of operations, or the loss of business-related information) arising out of, or in connection with, the use of, or inability to use the BHT system software or related manuals.  DENSO WAVE takes reasonable precautions to ensure its products do not infringe upon any patents or other intellectual property rights of other(s), however, DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) arising from any of the following. (1) The use of DENSO WAVE’s products in connection or in combination with other components, products, devices, data processing systems or software not supplied by DENSO WAVE. (2) The use of DENSO WAVE’s products in a manner for which they were not intended nor designed. (3) The modification of DENSO WAVE’s products by parties other than DENSO WAVE.  If it is judged by DENSO WAVE that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period. Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges.  The latest upgrade information  Free exhibition and event information for new products  Free web-information service “QBdirect.” QBdirect Service Contents Information searching service (FAQ) Offers detailed information on each product. Download service The latest OS systems for the BHT Series, repair software, and sample programs can be downloaded. E-mail inquiries Product related queries can be sent in by e-mail. * Please note that these privileges may be subject to change without prior notice. How to Register : Access the URL below and follow the instructions provided. http://www.qbdirect.net/ Usage Precautions Usage environment restrictions  Do not use the BHT where it may be exposed to fire, high temperatures, or direct sunlight. (Failure to observe this may result in damage, overheating, explosion, or fire.) * When the BHT is stored in a high-temperature, high-humidity environment of 50 to 60C, leave to sit in a location at room temperature and normal humidity for at least 1 day prior to use. Failure to observe this may cause a reading failure or damage the BHT.  Do not use the BHT in places with extreme temperature variations. (Failure to observe this may lead to BHT malfunction due to condensation.) * Leave the BHT for a short while prior to use when moved from a cold to a warm environment.  Do not use the BHT in places where it may be exposed to strong impact or significant static electricity.  Do not use the BHT in places where a strong magnetic field is generated. (Failure to observe this may lead to BHT malfunction due to magnetic force.) Keep the BHT away from electromagnetic waves and metallic objects. Wireless communication may not be possible in the following locations.  In the vicinity of other RFID devices (Failure to observe this may lead to BHT malfunction.)  In the vicinity of the following devices operating on a 2.4 GHz waveband (Communication may not be possible due to electromagnetic interference.)  Industrial, scientific, or medical equipment such as microwave ovens  Wireless LAN devices  Logistics systems in places such as plants or warehouses  Wireless devices such as personal or amateur radio stations  In the vicinity of household appliances emitting electromagnetic waves such as computers or televisions (Communication may not be possible due to electromagnetic noise.)  In the vicinity of metallic objects, in places with high levels of metallic dust, or in places surrounded my metal walls (Communication may not be possible due to the presence of metallic objects.) SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Meaning of Symbols WARNING Alerts you to those conditions which could cause serious bodily injury or death if the instructions are not followed correctly. CAUTION Alerts you to those conditions which could cause minor bodily injury or substantial property damage if the instructions are not followed correctly. WARNING Handling the battery Incorrect handling of the battery could cause the batteries to generate heat or smoke, or to rupture or burn. This is DANGEROUS. Be sure to observe the followi…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Support unit: Battery Page 3 Support unit: Cradle Page 4 Page 5 Support unit: Adapter for cradle Page 6

ラベル図，ラベル配置図： BHT-1281QULWB-CE 材質 ：PET 基材色 ：白色 （レーザー警告ラベルは黄色） 印刷色 ：黒色 接着材 ：感圧性接着材/強 ラミネート：有り 製品を後方から見た図 定格銘板 レーザ警告ラベル

Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13

Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23

Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 25 Report No. : SA150810C22 Issued Date : Sep. 03, 2015 FCC SAR Test Report Report No. : SA150810C22 Applicant : DENSO WAVE INCORPORATED Address : 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Product : 2D Code Handy Terminal FCC ID : PZWBHT1200QU Brand : DENSO Model No. : BHT-1281QULWB-CE Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE Std 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r01 KDB 248227 D01 v02r01 / KDB 447498 D01 v05r02 Sample Received Date : Aug. 10, 2015 Date of Testing : Aug. 27, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 25 Report No. : SA150810C22 Issued Date : Sep. 03, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods ........…

Text truncated - open the document above for the full version.

Report No.: RF150810C22A Page No. 1 / 44 Report Format Version: 6.1.1 Reference No.: 150810C22, 150824C20 FCC Test Report Report No.: RF150810C22A FCC ID: PZWBHT1200QU Test Model: BHT-1281QULWB-CE Received Date: Aug. 04, 2015 Test Date: Aug. 21 ~ Aug. 24, 2015 Issued Date: Aug. 24, 2015 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C.) Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150810C22A Page No. 2 / 44 Report Format Version: 6.1.1 Reference No.: 150810C22, 150824C20 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test ................................................................................................... 11 3.4 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Set Up ........................................................................................................................................ 16 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 25 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 25 4.2.2 Test Instruments ................................................................................................................................ 25 4.2.3 Test Procedures ................................................................................................................................. 26 4.2.4 Deviation from Test Standard .................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150810C22A-1 Page No. 1 / 47 Report Format Version: 6.1.1 Reference No.: 150810C22, 150824C20 FCC Test Report Report No.: RF150810C22A-1 FCC ID: PZWBHT1200QU Test Model: BHT-1281QULWB-CE Received Date: Aug. 04, 2015 Test Date: Aug. 04 ~ Aug. 24, 2015 Issued Date: Aug. 24, 2015 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C.) Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150810C22A-1 Page No. 2 / 47 Report Format Version: 6.1.1 Reference No.: 150810C22, 150824C20 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test ................................................................................................... 11 3.4 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Set Up ........................................................................................................................................ 16 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 26 4.2.2 Test Instruments ................................................................................................................................ 26 4.2.3 Test Procedures ................................................................................................................................. 27 4.2.4 Deviation From Test Standard ..............................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150810C22 Page No. 1 / 47 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150810C22 FCC ID: PZWBHT1200QU Test Model: BHT-1281QULWB-CE Received Date: Aug. 10, 2015 Test Date: Aug. 19 ~ Aug. 24, 2015 Issued Date: Aug. 24, 2015 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150810C22 Page No. 2 / 47 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Set Up ........................................................................................................................................ 17 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 29 4.2.1 Limits of Conducted Emission Meas…

Text truncated - open the document above for the full version.