PZWBHTM80QWG2D Code Handy Terminal

1 㻌 ᲼᳂᳎/5GTKGU Operator’s Guide ᧯సᣦ༡ Handy Terminal ᡭᣢᘧ᮲۾ुᥥჾ㻌 BHT-M80-QW (WLAN model) BHT-M80-QWG (WLAN + WWAN model) 㻌 㻌 Thank you for using the DENSO WAVE Handy Terminal. Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading. This manual contains only the basic details required for operation. Please refer to the User’s Manual for further details on general operation. The User’s Manual can be downloaded from the DENSO WAVE Web site. https://www.denso-wave.com / デ嫅ぐἧ䓐'(162:$9(℔⎠䘬ᡭᣢᘧ㌫㍷☐ˤ 䁢Ḯ嬻ぐ⃭↮ἧ䓐㛔䓊⑩䘬≇傥炻婳⛐攳⥳㑵ἄ⇵教嬨㛔婒㖶㚠ˤ᷎ᶼ炻⛐教嬨广䁢Ḯ傥⣈⛐矛天㗪晐 㗪⍫侫炻婳⥍┬ᾅ䭉㛔婒㖶㚠ˤ 㛔婒㖶㚠姀庱Ḯ㑵ἄ忶䦳ᷕ㇨暨天䘬➢㛔ℏ⭡ˤ 斄㕤㇨㚱㑵ἄ䘬娛䳘ℏ⭡炻婳⍫侫㑵ἄ婒㖶㚠ˤ 㑵ἄ婒㖶㚠⎗无㛔℔⎠䵚䪁⃵屣ᶳ庱ˤ KWWSZZZGHQVRZDYHFRP 㻌 㻌 㻌 496996-0850 2 Chapter 1 Please read me first Please contact your nearest distributor, if using in other countries. The latest precision manufacturing technology yields LCD panels with an effective resolution of 99.99% or higher. The downside, however, is that up to 0.01% of the pixels can remain permanently dark or lit on today’s state-of-the-art panels. Furthermore, please be aware that individual differences may occur in the screen color and brightness due to the characteristics of the white LEDs used in the LCD display backlight. The Customer shall not modify, reverse compile, reverse engineer, reverse assemble, and or otherwise tamper with our BHT’s firmware. 㻌 㻌 㻌 㻌 1.1 About This Manual 㻌 Due to changes and improvements, the content of this manual may be subject to change without prior notice. The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent. Please contact DENSO WAVE if this manual is lost. Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we kindly ask you to report any questionable descriptions, mistakes or omissions, if any, to DENSO WAVE. 1.2 Liability Limitations DENSO WAVE INCORPORATED (“DENSO WAVE”) does not assume any product liability (including damages for lost profits, interruption of operations, or the loss of business-related information) arising out of, or in connection with, the use of, or inability to use the BHT system software or related manuals. DENSO WAVE takes reasonable precautions to ensure its products do not infringe upon any patents or other intellectual property rights of other(s), however, DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) arising from any of the following. (1) The use of DENSO WAVE’s products in connection or in combination with other components, products, devices, data processing systems or software not supplied by DENSO WAVE. (2) The use of DENSO WAVE’s products in a manner for which they were not intended nor designed. (3) The modification of DENSO WAVE’s products by parties other than DENSO WAVE. If it is judged by DENSO WAVE that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period. DENSO WAVE will not bear any responsibility for data which customers have recorded and are received by DENSO WAVE for repair and analysis. 㻌 㻌 㻌 1.3 Free/Open source software (FOSS) This product contains Free / Open Source Software (FOSS.) DENSO WAVE is ready to provide compliant source codes. For details, please contact our dealer or contact the site below. https://www.denso-wave.com/ 3 1.4 Product Contents Check 㻌 Ensure you have all of the following items prior to use. In the event of missing or damaged item, please contact your dealer. z Handy terminal ×1 z Operator’s guide (this manual) ×1 z Wrist strap ×1 㻌 㻌 1.5 Customer Registration 㻌 To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. z The latest upgrade information z Free exhibition and event information for new products z Free web-information service “QBdirect.” 㻌 㻽㻮㼐㼕㼞㼑㼏㼠㻌㻿㼑㼞㼢㼕㼏㼑㻌㻯㼛㼚㼠㼑㼚㼠㼟㻌 Information searching service (FAQ) Offers detailed information on each product. Download service The latest OS systems for the BHT Series, repair software, and sample programs can be downloaded. E-mail inquiries Product related queries can be sent in by e-mail. 㻌 Please note that these privileges may be subject to change without prior notice. How to Register Access the URL below and follow the instruction provided. https://www.denso-wave.com/ 1.6 Secured Three-year Warranty 㻌 㻌 If you register the serial number of the product within one month after your purchase, the warranty of the registered product will be prolonged to three years from the one-year warranty. Please access the URL below to register. https://www.denso-wave.com/ The serial number for registration is found under the QR Code on the name plate. 4 1.7 Usage Precautions 1.7.1 Usage environment restrictions 㻌 㻌 Do not use the BHT where it may be exposed to fire, high temperatures, or direct sunlight. (Failure to observe this may result in damage, overheating, explosion, or fire.) When the BHT is stored in a high-temperature, high-humidity environment of 50° to 60°C, leave to sit in a location at room temperature and normal humidity for at least 1 day prior to use. Failure to observe this may cause a reading failure or damage the BHT. Do not use the BHT in places with extreme temperature variations. (Failure to observe this may lead to BHT malfunction due to condensation.) Leave the BHT for a short while prior to use when moved from a cold to a warm environment. Do not use the BHT in places where it may be exposed to strong impact or significant static electricity. 1.7.2 Keep the BHT away from electromagnetic waves and metallic objects. 㻌 Wireless communication may not be possible in the following locations and using. …

Text truncated - open the document above for the full version.

1 SAFETY PRECAUTIONS BHT-M80/M60 Series Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading. 2 496996-0860 SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Meaning of Symbols DANGER Alerts you to those conditions that could imminently lead to serious bodily injury or death if the instructions are not followed correctly. WARNING Alerts you to those conditions which could cause serious bodily injury or death if the instructions are not followed correctly. CAUTION Alerts you to those conditions which could cause minor bodily injury or substantial property damage if the instructions are not followed correctly. DANGER Handling battery Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.  Never disassemble or modify the battery.  Do not stick a needle into the battery, hammer at it, or tread on it.  Avoid dropping or throwing the battery or letting it undergo any shock or impact.  Do not use significantly damaged or deformed batteries. Do not use batteries when they are subject to the impact, for example, a drop impact.  Never connect the positive and negative terminals of the battery with a wire or other metallic materials.  Do not carry or store the battery together with ballpoint pens, necklaces, coins, hairpins, or anything else metallic.  Never place the battery into or soak it in water or seawater.  Never burn or heat up the battery.  Do not use or leave the battery in places where there is excessively high temperature (60 °C or higher) such as near fire or heater.  Do not use or store the battery in places exceeding the service or storage temperature.  Never charge the battery near a fire or in strong sunlight. Raised battery temperature may result in leakage of battery fluid, blowout, or combustion.  Never charge or use the battery where any inflammable gases may be emitted.  Never apply solder directly to the battery.  Do not use batteries other than the specified ones.  If the battery fluid leaked from the battery gets into the eyes, wash thoroughly with clean water such as tap water without rubbing and obtain medical treatment immediately. Failure to do so will result in eye injuries.  During use, charging, or storage of the battery, if odors come from the battery, the battery is overheated, discolored, deformed, or anything unusual is found, unload the battery from the BHT or charger. Do not use the battery.  If the battery does not finish recharging within the specified time, stop recharging. 3 WARNING Handling the BHT Incorrect handling of the BHT could cause electric shock, impaired vision, skin problems, injury, burns and generation of heat and smoke from the BHT. Be sure to observe the following to use the device correctly.  Never disassemble or modify the BHT.  When the BHT is subject to the strong impact, for example, a drop impact, check the case for any damage and the battery for damage and leakage. Never use a damaged case. Never use a damaged or leaked battery.  Do not insert any foreign materials into the battery cartridge.  Do not get the BHT wet or put it in water or seawater.  Never put the BHT in a microwave oven or high-pressure container. Never put it on the induction cooktop.  Never put the BHT in places where there are excessively high temperatures, such as inside closed- up automobiles, or in places exposed to direct sunlight.  Avoid using the BHT in extremely humid or dusty areas, or where there are drastic temperature changes.  If smoke, abnormal odor or noise comes from the BHT, immediately turn off the power and remove the battery cartridge from the scanner case.  If the LCD screen is broken by mistake, care must be taken not to get the liquid crystal into your eyes or mouth or drop it on your skin.  Be careful of broken glass if the LCD screen is accidentally cracked or broken. It may cause bodily injury.  If the LCD screen is accidentally broken and liquid crystal gets into your eyes or mouth, wash it off immediately with clean water and then seek medical care.  Never stare into the reading window. Handling battery Failure to follow all instructions listed below may cause electrical shock, overheating, smoking, fire, or an explosion.  The battery is exclusively for the BHT. Do not use the battery for purposes other than charging the BHT.  To charge the battery, be sure to use the specified charger, the charging cable, or the recommended wireless charger.  If abnormal odor, heat, discoloration, deformation or any other abnormal conditions are noticed when the battery is in use, being charged, or is in storage, remove it from the BHT or charger and avoid further use. 4 Handling the scanner using a laser light  The 2D Code Handy Terminal uses a laser light for indicating the scanning range. The intensity of the laser light is too low to inflict bodily injury. However, do not stare into beam. You must observe the following precautions when handling the BHT equipped with laser light. 1) Never stare into the reading window. 2) Never point the reading window at someone’s eye.  Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. [BHT-M80 series] [BHT-M80-QWG] code reading window ・LASER LIGHT-DO NOT STARE INTO BEAM.CLASS 2 LASER PRODUCT. ・LUMIERE LASER- NE PAS REGARDER DANS LE FAISCEAU. APPAREILA LASER DE CLASS 2 5 [BHT-M80-QW] [BHT-M60 series] To System Designers  When introducing BHTs in those systems that could affect human lives, develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs. ・LASER LIGHT-DO NOT STARE INTO BEAM.CLASS 2 LASER PRODUCT. ・LUMIERE LASER- NE PAS REGARDER DANS LE FAISCEAU. APPAREILA LASER DE CLASS 2 code r…

Text truncated - open the document above for the full version.

DENSO DENSO WAVE 1 Yoshiike Kusagi Agui-cho,Chita-gun Aichi 470-2297, Japan TEL: +81-569-49-50000 FAX: +81-569-49-5483 Date: 2020-12-23 FCC ID: PZWBHTM80QWG A UTHORIZ A TION LETTER To whom it may concern: I, the undersigned Takehiko Koshino of DENSO WAVE INCORPORATED hereby authorize yoshiki nagai of DENSO WAVE INCORPORATED to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by yoshiki nagai on my behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Takehiko Koshino / Title: General Manager DENSO WAVE INCORPORATED Tel: 0569-49-5339 Fax: 0569-49-5488 E-mail: [email protected]

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch 香港商立德國際商品試驗有限公司 桃園分公司 No. 19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 33383, Taiwan TEL: 886-3-3183232 FAX: 886-3-3270892 www.bureauveritas-adt.com / E-mail: [email protected] Date: 2021-02-04 Re: Supersede request for FCC ID: PZWBHTM80QWG; Granted on 01/28/2021 To Whom It May Concern: We regret to inform you that due to provide the wrong NII test report, we have submitted the wrong Test Report (NII)_rev2 exhibit to the filing. To prevent misunderstanding to the public, we would like to request the FCC to supersede the exhibit described as Test Report (NII)_rev3. If you have any questions, feel free to contact us. Thank you. Regards, NAME: Bruce Chen /Title: Senior Project Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 Fax: 886-3-327 0892 Email: [email protected]

Reference No.: 200428C03-1 Page 1/13 CONSTRUCTION PHOTOS OF EUT Reference No.: 200428C03-1 Page 2/13 Reference No.: 200428C03-1 Page 3/13 Reference No.: 200428C03-1 Page 4/13 Reference No.: 200428C03-1 Page 5/13 Reference No.: 200428C03-1 Page 6/13 Reference No.: 200428C03-1 Page 7/13 Reference No.: 200428C03-1 Page 8/13 Reference No.: 200428C03-1 Page 9/13 Reference No.: 200428C03-1 Page 10/13 Reference No.: 200428C03-1 Page 11/13 Reference No.: 200428C03-1 Page 12/13 Reference No.: 200428C03-1 Page 13/13

Procedure for e-label check Starting from Menu or Home: Step 1 –BHTShell Step 2 –“5 SystemInfo” Step 3 –“2 Regulatory Info” E-Label sample BHT-M80-QWG

Reference No.: 200428C03-2 Page 1/15 CONSTRUCTION PHOTOS OF EUT Reference No.: 200428C03-2 Page 2/15 Reference No.: 200428C03-2 Page 3/15 Reference No.: 200428C03-2 Page 4/15 Reference No.: 200428C03-2 Page 5/15 Reference No.: 200428C03-2 Page 6/15 Reference No.: 200428C03-2 Page 7/15 Reference No.: 200428C03-2 Page 8/15 Reference No.: 200428C03-2 Page 9/15 Reference No.: 200428C03-2 Page 10/15 Reference No.: 200428C03-2 Page 11/15 Reference No.: 200428C03-2 Page 12/15 Reference No.: 200428C03-2 Page 13/15 Reference No.: 200428C03-2 Page 14/15 Reference No.: 200428C03-2 Page 15/15

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 52 Report No. : SF200428C03 Issued Date : Oct. 22, 2020 SAR Test Report Report No. : SF200428C03 Applicant : DENSO WAVE INCORPORATED Address : 1 Yoshiike Kusagi Agui-cho,Chita-gun Aichi 470-2297, Japan Product : 2D Code Handy Terminal FCC ID : PZWBHTM80QWG Brand : DENSO Model No. : BHT-M80-QWG Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 648474 D04 v01r03 KDB 941225 D01 v03r01, KDB 941225 D05 v02r05, KDB 941225 D06 v02r01 Sample Received Date : Apr. 28, 2020 Date of Testing : May. 13, 2020 ~ Oct. 13, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Shelly Hsueh / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 52 Report No. : SF200428C03 Issued Date : Oct. 22, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area Scan and Zoom Scan Procedure .......................................................................................................... 14 3.4.2 Volume Scan Procedure ..................................................................................…

Text truncated - open the document above for the full version.

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) s Schwe1zerischer Kalibrierdienst C Service suisse d'etalonnage Servi:a:io svizzero di taratura Swiss Calibration Service s Accreditation No.: SCS 0108 The Swiss~creditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client B.V. ADT (Auden) Certificate No: EX3-3971 _Jan20 CALIBRATION CERTIFICATE Object EX3DV4 - SN:3971 Calibration procedure(s) QA CAL-01.v9, QA CAL-14.v5, QA CAL-23.vS, QA CAL-25.v7 Calibration procedure for dosimetric E-field probes Calibration date January 27, 2020 This calibration certificate documents the traceability to national standards. which reali,:e the physical units of measurements (SI). The measurements and the uncertainties with confidence probability are given on the following pages and a re part of the certificate All calibrations have been conducted in the closed laboratory facility: environment temperature (22±3)°C and humiclity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 03-Apr-19 (No. 217-02892102893) Apr-20 Power sensor NRP-Z91 SN. 103244 03-Apr-19 (No. 217-02892) Aor-20 Power sensor NRP-Z91 SN: 103245 03-Apr-19 (No. 217-02893) Apr-20 Reference 20 dB Attenuator SN: S5277 (20x) 04-Apr-19 (No. 217-02894) Apr-20 DAE4 SN: 660 27-Dec-19 (No. DAE4-660 Dec19) Dec-20 Reference Prol>e ES3DV2 SN: 3013 31-Dec-19 (No. ES3-3013 Dec19) Dec-20 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06-Apr-16 (1n house check Jun-1 BJ In house check: J un-20 Power sensor E4412A SN. MY41498087 06-Apr-16 (iri house check Juri-18) In house check·Jun-20 Power sensor E4412A SN: 000110210 06-Apr-16 (in house check Jun-18) In house check: Jun-20 RF generator HP 8648C SN: US3642U01700 04-Aug-99 (in house check Jun-18) In house check: Jun-20 Network Analyzer E8358A SN: US41080477 31-Mar-14 (in house check Oct-19) In house check·Oct-20 Calibrated by Name Michael Weber Function Laboratory Technician Signature )I虛幻7 Approved by: Katja Pokovic Technical Manager /棻之夕 Issued: February 4, 2020 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3-3971_Jan20 Page 1 of 22 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL NORMx,y,z ConvF DCP tissue simulating liquid sensitivity in free space sensitivity in TSL / NORMx,y,z diode compression point crest factor (1 /duty_ cycle) of the RF signal modulation dependent linearization parameters cp rotation around probe axis s Schwelzer1scher Kali brierdiens1 C Service sulsse d'etalonnage Servizio svizzero di taratura Swiss Calibration Service s Accreditation No.: SCS 0108 CF A,B,C,D Polarization <Jl Polarization ,9 Connector Angle a rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., ,q. = 0 is normal to probe axis information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209-1, ", "Measurement procedure for the assessment of Specific Absorption Rate {SAR) from hand- held and body-mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 ct) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: • NORMx,y,z: Assessed for E-field polarization ,t, = 0 (f :-,; 900 MHz in TEM-cell; f > 1800 MHz: R22 waveguide) NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E2-field uncertainty inside TSL (see below ConvF) • NORM(f)x,y,z = NORMx,y,z .. frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. • DCPx,y z: DCP , are numerical hnearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. • PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics • Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A B C D ,,, are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. • ConvF and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature Transfer Standard for f邙 800MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z "ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in …

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 22, 2020 Report No. : SF200428C03 Appendix D. Photographs of EUT and Setup The setup photographs for SAR testing are shown as follows. SAR Test Report Report Format Version 5.0.0 Issued Date : Oct. 22, 2020 Report No. : SF200428C03 Appendix E. Maximum Target Conducted Power The maximum conducted average power (Unit: dBm) including tune-up tolerance is shown as below. GSM850GSM1900 Maximum Target Power Maximum Target Power GSM (GMSK, 1Tx-slot)32.030.523.021.5 GPRS (GMSK, 1Tx-slot)32.030.523.021.5 GPRS (GMSK, 2Tx-slot)31.030.025.024.0 GPRS (GMSK, 3Tx-slot)30.028.525.724.2 GPRS (GMSK, 4Tx-slot)29.026.526.023.5 EDGE (8PSK, 1Tx-slot)26.526.517.517.5 EDGE (8PSK, 2Tx-slot)26.526.520.520.5 EDGE (8PSK, 3Tx-slot)26.526.520.220.2 EDGE (8PSK, 4Tx-slot)26.526.520.520.5 GSM850 Mode Maximum Burst- Averaged Output Power Maximum Burst- Averaged Output Power GSM1900 GSM Max. Power (Full) Maximum Frame-Averaged Output Power Maximum Target Power Maximum Target Power WCDMA Band II24.523.5 WCDMA Band V24.523.5 WCDMA Max. Power (Full) Mode RMC 12.2K HSDPA / DC- HSDPA / HSUPA Maximum Target Power Maximum Target Power LTE 223.522.5 LTE 423.522.5 LTE 523.522.5 LTE 724.023.0 LTE 1223.522.5 LTE 1323.522.5 LTE 1723.522.5 LTE 2523.522.5 LTE Max. Power (Full) Mode 16QAMQPSK ModeChannel Frequency Max Tune up Max Tune up Max Tune up 1241219.519.522.5 6243720.520.523.5 11246218.519.022.0 1241216.517.019.5 6243720.521.524.0 11246216.016.519.5 1241215.517.019.5 6243720.521.024.0 11246215.516.519.0 3242215.015.518.5 6243716.017.020.0 9245214.015.017.5 802.11n HT20 WLAN2.4GHz Ant 0 802.11g 802.11b WLAN Tune-up Power (Full) Ant 0+1Ant 1 802.11n HT40 WLAN Tune-up Power (Full) ModeChannel Frequency Max Tune up Max Tune up 024021.0 3924411.0 7824801.0 024021.0 1924401.0 3924801.0 BR / EDR Ant 0Bluetooth LE Ant 1 WLAN Tune-up Power (Full) ModeChannel Frequency Max Tune up Max Tune up Max Tune up 36518019.520.023.0 40520019.520.022.5 44522019.519.522.5 48524019.520.022.5 36518020.020.523.0 40520020.020.523.0 44522020.020.023.0 48524020.020.523.0 38519019.520.023.0 46523021.021.524.0 802.11ac VHT8042521019.019.522.5 802.11n HT20 802.11n HT40 WLAN 5.2GHz 802.11a Ant 0Ant 1 Ant 0+1 WLAN Tune-up Power (Full) ModeChannel Frequency Max Tune up Max Tune up Max Tune up 52526020.020.023.0 56528020.020.023.0 60530020.020.023.0 64532020.020.023.0 52526020.520.523.5 56528020.520.523.5 60530020.520.523.5 64532020.520.523.5 54527020.521.024.0 62531019.019.522.5 802.11ac VHT8058529018.518.521.5 Ant 0+1WLAN 5.3GHz Ant 0 802.11n HT40 802.11a 802.11n HT20 Ant 1 WLAN Tune-up Power (Full) ModeChannel Frequency Max Tune up Max Tune up Max Tune up 100550019.519.522.5 116558019.519.522.5 120560019.519.522.5 124562019.519.522.5 132566019.519.522.5 140570019.519.522.5 144572019.519.522.5 100550019.520.023.0 116558019.520.023.0 120560020.020.023.0 124562020.020.023.0 132566020.020.023.0 140570020.020.023.0 144572020.020.02…

Text truncated - open the document above for the full version.