Q5A-SMAC-5800APX-58200-D

Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle 1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 20 cm entre l'antenne emettrice et les personnes. 3. Antenn externe. Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. 4. Procedure d'installation Consulter le manuel d'utilisation. 5. Avertissement Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales.

SMAC User Manual Sify Technologies Limited, 2011 © Copyright Protected Page 1 SIFY TECHNOLOGIES LTD. SMAC User Manual Author: ANE Date: 03-Oct-2012 Revision: 4.0 SMAC User Manual Sify Technologies Limited, 2011 © Copyright Protected Page 2 Revision History Revision Date Author Change description 1.0 19-Jul-2011 ANE Initial revision. 2.0 22-Dec-2011 ANE 1. Separated operation mode specific settings. 3.0 10-Jul-2012 ANE 1. Enterprise features added 4.0 03-Oct – 2012 ANE 2. Monitoring tab added. SMAC User Manual Sify Technologies Limited, 2011 © Copyright Protected Page 3 Contents Federal Communication Commission Interference Statement ............................................................. 6 1 Product Overview .................................................................................................................................... 8 1.1 Feature ............................................................................................................................................... 8 1.2 Package Contents ........................................................................................................................... 10 1.3 System Requirement ...................................................................................................................... 10 1.4 Hardware Overview ........................................................................................................................ 10 2 Computer Configuration Instruction .................................................................................................. 11 2.1 Assign a Static IP ............................................................................................................................ 11 2.2 Logging Method ............................................................................................................................. 12 3 Status ...................................................................................................................................................... 13 3.1 Save/Load ........................................................................................................................................ 13 3.2 Main ................................................................................................................................................. 14 3.3 Statistics ........................................................................................................................................... 15 3.4 Wireless Client List ......................................................................................................................... 15 3.5 Connection Status .......................................................................................................................... 17 4 System ..................................................................................................................................................... 18 4.1 Switching Operation Mode ........................................................................................................... 18 4.2 IP Settings: ....................................................................................................................................... 19 4.3 Ethernet Settings: ........................................................................................................................... 20 5 Wireless Configuration ......................................................................................................................... 20 5.1.0 Wireless Settings ......................................................................................................................... 20 5.1.1 Outdoor Base Mode.................................................................................................................... 20 5.1.2 Outdoor Subscriber ..................................................................................................................... 21 5.2 Wireless Security Settings ............................................................................................................. 22 5.3 Wireless MAC Filter ........................................................................................................................ 23 5.4 Wireless Advanced Settings .......................................................................................................... 24 6.0.0 Enterprise Features ...................................................................................................................... 26 6.0.1 Access VLAN mode ..................................................................................................................... 26 SMAC User Manual Sify Technologies Limited, 2011 © Copyright Protected Page 4 6.0.2 Trunk mode .................................................................................................................................. 27 6.0.3 QinQ mode ................................................................................................................................... 28 7.0.0 Radius ........................................................................................................................................... 29 7.0.1 Primary Server .............................................................................................................................. 29 7.0.2 Secondary Server ......................................................................................................................... 30 7.0.3 Radius settings ............................................................................................................................. 30 8.0 Filtering ................................................................................................................................................ 31 8.0.1 Global filtering ...................................................................................…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 6 Page 7 Page 8 Page 9

Label location

Page 3 Page 4 Page 5

FCC ID: Q5A-SMAC-5800 Report No.: RF120910C27 Operational Description This device is a APX-58200-D, which operates in both of the 5GHz bands; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 54Mbps data rate with OFDM technique will be applied. The transmitter of the EUT is powered by 24Vdc from POE. The antenna is Dipole antenna with N-Type antenna connector. The other instruction, please have a look at the users manual.

Report No.: SA120910C27 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120910C27 MODEL NO.: SMAC 5800 FCC ID: Q5A-SMAC-5800 RECEIVED: Sep. 10, 2013 TESTED: Sep. 10, 2012 ~ Apr. 16, 2013 ISSUED: May 08, 2013 APPLICANT: Sify Technologies Ltd ADDRESS: II floor, TIDEL Park, 4, Rajiv Gandhi Salai, Tharamani, Chennai – 600113 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA120910C27 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................ 4 2. RF EXPOSURE .............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................ 5 2.2 MPE CALCULATION FORMULA ................................................................................... 5 2.3 CLASSIFICATION .......................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................. 5 Report No.: SA120910C27 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120910C27 Original release May 08, 2013 Report No.: SA120910C27 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: APX-58200-D MODEL NO.: SMAC 5800 BRAND: Sify APPLICANT: Sify Technologies Ltd TESTED: Sep. 10, 2012 ~ Apr. 16, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: SMAC 5800) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :May 08, 2013 Jemma Yang / Specialist APPROVED BY : , DATE :May 08, 2013 Ken Liu / Senior Manager Report No.: SA120910C27 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation result of maximum conducted power MODULATION MODE MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 802.11n (20MHz) 22.38 9.01 20 0.2740 1 NOTE: Directional gain = 6dBi + 10log(2) = 9.01dBi

Report No.: RF120910C27 1 of 57 Report Format Version 5.1.0 FCC TEST REPORT (15.247) REPORT NO.: RF120910C27 MODEL NO.: SMAC 5800 FCC ID: Q5A-SMAC-5800 RECEIVED: Sep. 10, 2013 TESTED: Sep. 10, 2012 ~ Apr. 16, 2013 ISSUED: May 08, 2013 APPLICANT: Sify Technologies Ltd ADDRESS: II floor, TIDEL Park, 4, Rajiv Gandhi Salai, Tharamani, Chennai – 600113 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120910C27 2 of 57 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1. CERTIFICATION ......................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 6 3. GENERAL INFORMATION ......................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................. 9 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 13 4. TEST TYPES AND RESULTS (FOR 5.0GHz BAND) ............................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 14 4.1.2 TEST INSTRUMENTS .............................................................................................................. 15 4.1.3 TEST PROCEDURES .............................................................................................................. 17 4.1.4 DEVIATION FROM TEST STANDARD .................................................................................... 17 4.1.5 TEST SETUP ............................................................................................................................ 18 4.1.6 EUT OPERATING CONDITIONS ............................................................................................. 18 4.1.7 TEST RESULTS ....................................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 35 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................ 35 4.2.2 TEST INSTRUMENTS .............................................................................................................. 35 4.2.3 TEST PROCEDURES .............................................................................................................. 36 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................... 36 4.2.5 TEST SETUP ............................................................................................................................ 36 4.2.6 EUT OPERATING CONDITIONS ............................................................................................. 36 4.2.7 TEST RESULTS ....................................................................................................................... 37 4.3 6dB BANDWIDTH MEASUREMENT ........................................................................................ 39 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ..................................................................... 39 4.3.2 TEST SETUP ............................................................................................................................ 39…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST