Q5A-SMAC-CPA57020Wireless device

User Operating Manual Sify Technologies LTD Page 1 USER OPERATING MANUAL RADIO Manufactured by, Senao Neworks. User Operating Manual Sify Technologies LTD Page 2 MANUFACTURER SENAO NETWORKS MANUFACTURER’S ADDRESS NO. 528 Fushing 3rd, Hwa-Ya tech. Park Kueishan, Tao Yuan 333, Taiwan FACTORY NAME SENAO NETWORKS FACTORY ADDRESS NO. 528 Fushing 3rd, Hwa-Ya tech. Park Kueishan, Tao Yuan 333, Taiwan VERSION 2.0 User Operating Manual Sify Technologies LTD Page 3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. User Operating Manual Sify Technologies LTD Page 4 Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non- approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. User Operating Manual Sify Technologies LTD Page 5 Table of Contents Safety precautions: ............................................................................................................................. 7 1.1 ODU ................................................................................................................................................... 8 Description .............................................................................................................................................. 8 Technical Specification ............................................................................................................................ 9 1.0 ODU (Radio) .................................................................................................................................... 11 1.1 System Requirement ............................................................................................................... 11 1.2 Hardware Overview ................................................................................................................ 11 1.3 Computer Configuration Instruction ........................................................................................... 11 1.3.1 Assign a Static IP................................................................................................................... 12 1.3.2 Logging Method ................................................................................................................... 12 1.4 Status .......................................................................................................................................... 13 1.4.1 Save/Load ............................................................................................................................. 13 1.4.2 Main ..................................................................................................................................... 14 1.4.3 Wireless Client List ............................................................................................................... 14 1.4.4 System Log ........................................................................................................................... 15 1.4.5 Connection Status ................................................................................................................ 15 1.5 System ............................................................…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Label location

CPA-57020-V1

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Report No.: SA150123C26 1 of 5 Report Format Version 5.0.1 EXPOSURE REPORT REPORT NO.: SA150123C26 MODEL NO.: CPA-57020-V1 FCC ID: Q5A-SMAC-CPA57020 RECEIVED: Jan. 23, 2015 TESTED: Jan. 27 ~ Jan. 28, 2015 ISSUED: Feb. 05, 2015 APPLICANT: Sify Technologies Ltd. ADDRESS: II floor, TIDEL Park, 4, Rajiv Gandhi Salai, Tharamani, Chennai – 600113 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA150123C26 2 of 5 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE ....................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ................................. 5 2.2 MPE CALCULATION FORMULA ............................................................................. 5 2.3 CLASSIFICATION .................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 5 Report No.: SA150123C26 3 of 5 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA150123C26 Original release Feb. 05, 2015 Report No.: SA150123C26 4 of 5 Report Format Version 5.0.1 1. CERTIFICATION PRODUCT: Wireless device MODEL NO.: CPA-57020-V1 BRAND: Sify APPLICANT: Sify Technologies Ltd. TESTED: Jan. 27 ~ Jan. 28, 2015 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (model: CPA-57020-V1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY :, DATE :Feb. 05, 2015 Celine Chou / Specialist APPROVED BY : , DATE :Feb. 05, 2015 Ken Liu / Senior Manager Report No.: SA150123C26 5 of 5 Report Format Version 5.0.1 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5745-5825 15.56 18 20 0.452 1

Report No.: RF150123C26 1 of 47 Report Format Version 5.3.0 FCC TEST REPORT (15.407) REPORT NO.: RF150123C26 MODEL NO.: CPA-57020-V1 FCC ID: Q5A-SMAC-CPA57020 RECEIVED: Jan. 23, 2015 TESTED: Jan. 27 ~ Jan. 28, 2015 ISSUED: Feb. 05, 2015 APPLICANT: Sify Technologies Ltd. ADDRESS: II floor, TIDEL Park, 4, Rajiv Gandhi Salai, Tharamani, Chennai – 600113 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150123C26 2 of 47 Report Format Version 5.3.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ............................................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 13 4. TEST TYPES AND RESULTS .................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 14 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .............. 14 4.1.3 TEST INSTRUMENTS ................................................................................................ 15 4.1.4 TEST PROCEDURES ................................................................................................ 16 4.1.5 DEVIATION FROM TEST STANDARD ...................................................................... 16 4.1.6 TEST SETUP .............................................................................................................. 17 4.1.7 EUT OPERATING CONDITION .................................................................................. 18 4.1.8 TEST RESULTS ......................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 28 4.2.2 TEST INSTRUMENTS ................................................................................................ 28 4.2.3 TEST PROCEDURES ................................................................................................ 29 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 29 4.2.5 TEST SETUP .............................................................................................................. 29 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 29 4.2.7 TEST RESULTS ......................................................................................................... 30 4.3 TRANSMIT POWER MEASUREMENT ...................................................................... 32 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT ................................................... 32 4.3.2 TEST SETUP .............................................................................................................. 32 4.3.3 TEST INSTRUMENTS ................................................................................................ 32 4.3.4 TEST PROCEDURE .............................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST