Q92-BHD9830U-WIFIWireless Smart WiFi Lamp Holder

Control Devices - Individual Control NO.4.1 Click "Add to shared", enter the account to share devices with, and click OK to finish. To stop sharing with an account previously added, press and hold to delete in Android, or slide to the left to delete in IOS. 1. Click "Create Group" under "More" on a selected device page, as shown in Fig. 1. 2. The page displays all devices with the same model number and available to be added as a group. Select a device and click Save, then enter group name and click OK to finish, as shown in Fig. 2. 3. When a group has been created successfully, the page will be automatically redirected to the group control panel in Fig. 3, where grouped devices can be managed. Control Devices - Group Control NO.4.1 1. Groups that have been created can be viewed on the "My Household" page, and managed with hotkeys. 2. Open the group control panel as shown in Fig. 2. 3. Click "..." at the top right corner to configure or remove groups, as shown in Fig. 3. Control Devices - Group Control NO.4.1 Click the "Smart Scenes" at the bottom of page-Fig 1, then enter into the next page-Fig 2, click "+" at the top right corner and select "Automation" to go to the smart configuration page, as shown in Fig. 3 Click "+" as shown in Fig. 3 to add multiple conditions or multiple actions. Smart Features - Automation NO.5.1 Add condition: For example, to add temperature as a condition, select temperature as shown in Fig 1, configure temperature- related conditions as shown in Fig. 2, and then click “Next" to add the condition as shown in Fig. 3. Smart Features - Automation NO.5.1 Fig 1Fig 2Fig 3 Add action: Click "Add action" or "+" at the top right corner to open the menu, as shown in the following Fig. 1. There are four action types: scenario, automation, device, and push notification Conditions and actions of automation can all be set up as shown in following Fig. 2. The system primarily supports three types of automation: 1. Inter-device synchronization, such as turning on the aroma diffuser and air purifier automatically at the same time the A/C unit is turned on. 2. External environment and device synchronization, such as turning on the A/C unit automatically when the temperature falls below 0°C. 3. Timed actions, such as drawing back the curtains drawn automatically at 8:00 am every morning. Fig 1 Fig 2 Select a scenario as shown in Fig. 1 and go to the configuration page. As shown in Fig. 2, you can edit the scenario name. Click "Add action" or "+" at the top right corner to add an action. The action menu is shown in Fig. 3. Configuration is similar to that of automated devices. Smart Features - Scene NO.5.2 Fig 1 Fig 2 Fig 3 To configure a scenario with "Trigger automation", you must set up an automated scenario in advance. If existing automation options are available as shown in Fig. 1, select "Trigger and activate" or "Trigger and deactivate". Then, click "Next" and enter scenario name, and click “Save" at the top right corner to finish configuration. Smart Features - Scene NO.5.2 Fig 1Fig 2 Previously configured automation and scenarios are displayed in the "Smart Features" page. Click "Edit" at the top left corner to modify existing scenarios and automated devices. For example, click "Modify scenario" to go to the page shown in Fig. 2, where the order of scenarios can be changed and scenarios can be deleted by sliding left. (In iOS, click "-" on the left of scenario name to delete.) Smart Features - Add/Modify/Delete NO.5.3 Edit a scenario: Click "..." as shown in Fig. 1 to go to the Edit page. Edit automation: Click anywhere on the background of automation, as shown in Fig. 1, to go to the Edit page. Go to the automation edit page shown in Fig. 2. Slide left to delete previously added conditions or actions, add new conditions or actions, or delete the smart feature entirely. Fig 1Fig 2 Add various types of devices Supports voice command Switch between rooms in a household View status of smart devices in each room One-key activation for smart scenarios Easy switch between everyday scenarios For users with multiple households Able to switch between/add households My Household NO.6 Personal settings is the user's portal to managing personal information and shows the following information: 1. Household Management 2. Message Center: feedback results, shared news,and devices supporting notification 3. ScanQR Code: Some devices support QR code scanning. 4. FAQ: Frequently Asked Questions 5. Feedback: Report problems encountered during usage here. 6. Settings Profile(Me) page NO.7 Settings-About NO.7 The About page displays app information as follows: 1. Click "Rate us" to go to the app store and rate the app. 2. Privacy Policy 3. Open Source License 4. Current Version The Integration page displays “ Amazon alexa”, “Google Assistant”, “IFTTT”, and so on operation instructions. You only need to click “ Find More” will be the operation details reference. Personal -Settings NO.7 The Personal Settings page shows your account information. Here you can change your password, link your mobile number to your account, configure your gesture password, and terminate your account Click "Gesture Unlock" to set up a gesture password. Once a gesture password is activated, you will have to use the gesture to access the app. If you forgot your gesture password, click "Forgot Gesture Password" to have an authentication code sent to your registered mobile phone number. Enter the code and set up a new gesture password to continue. Personal Settings-Gesture Password NO.7 15161718192021222314 Gest ur e pass wor d Set ti ngs About NO.1 Download App To download the app, search for "Smart Life" in any app store , or scan the QR code below NO.2 Registration/Login/Password Retrieval Lo g in Re gi st er Registration If you do not have an app account, you may choose to register or log in by text message authentication. The registration process is described on this page and the next. 1. Click ‘Create account’to go …

Text truncated - open the document above for the full version.

U.S. AGENT LETTER OF ATTESTATION A pplicant: NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Address:NO. 180, YANSHAN RD, HUXIMEN, HENGHE TOWN, CIXI, NINGBO, China Zip Code:315318 FRN: 0022061477 Tel: +0 (86) 574-63265968 Email: [email protected] Signed by (printed name): Jason Wang Signature: Manager Date: 2023-11-27 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: Q92-BHD9 830U-WIFI NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature:

ATTESTATION STATEMENT Applicant: NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Address:NO. 180, YANSHAN RD, HUXIMEN, HENGHE TOWN, CIXI, NINGBO, China Zip Code:315318 Tel: +0 (86) 574-63265968 Email: [email protected] Date: 2023-11-27 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii)Filing FCC ID: Q92-BHD9830U-WIFI NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section2.903 of the FCC rules. And NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signed by (printed name): Jason Wang Signature:

NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Address: NO. 180, YANSHAN RD, HUXIMEN, HENGHE TOWN, CIXI, NINGBO, China Zip Code:315318 Tel: +0 (86) 574-63265968 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2023-11-27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. , the undersigned, hereby authorizes World Alliance Testing & Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing & Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Jason Wang Manager

NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Address: NO. 180, YANSHAN RD, HUXIMEN, HENGHE TOWN, CIXI, NINGBO, China Zip Code:3 15 318 Tel: +0 (86) 574-63265968 Email: [email protected] FCC Confidential Authorization Date: 2023-11-27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Su bject: Confidentiality Request regarding application for certification of FCC ID: Q92-BHD9830U-WIFI In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. hereby requests long- term confidential treatment of information accompanying this application as outlined below: •Bloc k Diagram •Schematics •Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Jason Wang Manager

NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. Address: NO. 180, YANSHAN RD, HUXIMEN, HENGHE TOWN, CIXI, NINGBO, China Zip Code:3 15318 Tel: +0 (86) 574-63265968 Email: [email protected] Date: 2023-11-27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, NINGBO BAIHUANG ELECTRIC APPLIANCES CO., LTD. hereby authorize World Alliance Testing & Certification(Shenzhen) Co., Ltd.to act as a laboratory for testing and test report generation for the following project(s): (Product description: Wireless Smart WiFi Lamp Holder, FCC ID: Q92-BHD9830U- WIFI) For use in America this product only support/enable 2.4GHz WIFI, other functions have been shielded by the manufacturer using the software, end user cannot activate. Sincerely, Signature Jason Wang Manager

Report No.: RWAY202300012 Page 1 of 3 EUT EXTERNAL PHOTOGRAPHS Report No.: RWAY202300012 Page 2 of 3 Report No.: RWAY202300012 Page 3 of 3

Wireless Smart WiFi Lamp Holder Model:BHD9830U-WIFI FCC ID: Q92-BHD9830U-WIFI RATING:120VAC/60Hz Max.Power:Incandescent Bulb 60W CFL/LED Lamp 20W Indoor Dry Location Use Only

Report No.: RWAY202300012 Page 1 of 3 EUT INTERNAL PHOTOGRAPHS Report No.: RWAY202300012 Page 2 of 3 Report No.: RWAY202300012 Page 3 of 3 ANT

Report Template: TR-4-E-011/V1 RF Exposure Evaluation Report No.: RWAY202300012B Applicant: Ningbo Baihuang Electric Appliances Co.,Ltd Address: NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY Product Name: Wireless Smart WiFi Lamp Holder Product Model: BHD9830U Multiple Models: N/A Trade Mark: N/A FCC ID: Q92- Standards: 47 CFR §1.1307 KDB 447498 D04 Test Date: 2024 Test Result: Complied Report Date: 2024 Reviewed by: Abel Chen Project Engineer World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: Page 1 of 7 RF Exposure Evaluation Report RWAY202300012B Ningbo Baihuang Electric Appliances Co.,Ltd NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY ,NINGBO,ZHEJIANG,CHINA Wireless Smart WiFi Lamp Holder BHD9830U-WiFi -BHD9830U-WIFI 47 CFR §1.1307 KDB 447498 D04 Interim General RF Exposure Guidance v01 2024-01-18 Complied 2024-01-29 Approved by: Abel Chen Project Engineer Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report No.: RWAY202300012B Report NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI Interim General RF Exposure Guidance v01 Jacob Kong Manager World Alliance Testing and Certification (Shenzhen) Co., Ltd Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report Template: TR-4-E-011/V1 1．This test report shall not be reproduced in full or partial, without the written approval of Wo Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim by NVLAP, NIST, or any agency of the 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the name, addresses, names, trademarks etc. are included. Version No. 00 Report No.: Page 2 of 7 Announcement This test report shall not be reproduced in full or partial, without the written approval of Wo Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Issued Date Description 2024-01-29 Original Report No.: RWAY202300012B This test report shall not be reproduced in full or partial, without the written approval of World product certification, approval, or endorsement 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its validity of the result in the test report. Customer model Description Original Report Template: TR-4-E-011/V1 1 General Information ................................ 1.1 Client Information ................................ 1.2 Product Description of EUT 1.3 Laboratory Location ................................ 2 RF Exposure Evaluation ................................ 2.1 Standard ................................ 2.2 Result................................ Report No.: Page 3 of 7 Contents ................................................................................................ ................................................................................................ t Description of EUT ................................................................................................ ................................................................................................ ................................................................................................ ................................................................................................ ................................................................................................................................ Report No.: RWAY202300012B ............................................................ 4 ...................................................... 4 ....................................... 4 ................................................... 4 ..................................................... 5 .................................................................... 5 ......................................... 7 Report Template: TR-4-E-011/V1 1 General Information 1.1 Client Information Applicant: Ningbo Baihuang Electric Appliances Co.,Ltd Address: NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY Manufacturer: Ningbo Baihuang Electric Appliances Co.,Ltd Address: NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY ,NINGBO,ZHEJIANG,CHINA 1.2 Product Description The EUT is Wireless Smart WiFi Lamp Holder testing of the 2.4G WLAN radio. Sample Serial Number 2J-3 Sample Received Date 2024 Sample Status Good Condition Frequency Range 2412MHz 2422MHz Maximum Conducted Output Power 17.83 Modulation Technology DSSS, OFDM Antenna Gain # 0dBi Spatial Streams SISO (1TX, 1RX) Power Supply AC 12 Operating temperature # -20 deg.C to + Adapter Information N/A Modification Sample 1.3 Laboratory Location World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, E…

Text truncated - open the document above for the full version.

Report No.: RWAY202300012A Report Template: TR-4-E-009/V1 Page 1 of 53 FCC Test Report Report No.: RWAY202300012A Applicant: Ningbo Baihuang Electric Appliances Co.,Ltd Address: NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY ,NINGBO,ZHEJIANG,CHINA Product Name: Wireless Smart WiFi Lamp Holder Product Model: BHD9830U-WiFi Multiple Models: N/A Trade Mark: N/A FCC ID: Q92-BHD9830U-WIFI Standards: FCC CFR Title 47 Part 15C (§15.247) Test Date: 2024-01-12 to 2024-01-18 Test Result: Complied Report Date: 2024-01-29 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAY202300012A Report Template: TR-4-E-009/V1 Page 2 of 53 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-01-29 Original Report No.: RWAY202300012A Report Template: TR-4-E-009/V1 Page 3 of 53 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Antenna information .................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) .................................................................................................... 5 1.5 Measurement Uncertainty ......................................................................................................... 5 1.6 Laboratory Location ................................................................................................................... 5 1.7 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 7 2.3 Test Setup .................................................................................................................................. 7 2.4 Test Procedure .......................................................................................................................... 9 2.5 Measurement Method.............................................................................................................. 10 2.6 Measurement Equipment ......................................................................................................... 11 3 Test Results ....................................................................................................................................... 12 3.1 Test Summary .......................................................................................................................... 12 3.2 Limit ......................................................................................................................................... 13 3.3 AC Line Conducted Emissions Test Data ................................................................................ 14 3.4 Radiated emission Test Data ................................................................................................... 17 3.5 RF Conducted Test Data ......................................................................................................... 41 3.5.1 6 dB Emission Bandwidth and 99% Occupied Bandwidth ........................................... 41 3.5.2 Maximum Conducted Peak Output Power ................................................................... 41 3.5.3 Power Spectral Density ................................................................................................ 42 3.5.4 100 kHz Bandwidth of Frequency Band Edge ............................................................. 42 3.5.5 Duty Cycle .................................................................................................................... 42 4 Test Setup Photo ............................................................................................................................... 52 5 E.U.T Photo ........................................................................................................................................ 53 Report No.: RWAY202300012A Report Template: TR-4-E-009/V1 Page 4 of 53 1 General Information 1.1 Client Information Applicant: Ningbo Baihuang Electric Appliances Co.,Ltd Address: NO.180,YANSHAN ROAD,HUXIMEN,HENGHE TOWN,CIXI CITY ,NINGBO,ZHEJIANG,CHINA Manufac…

Text truncated - open the document above for the full version.

Report No.: RWAY202300012 Page 1 of 2 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: RWAY202300012 Page 2 of 2 Radiated Emission Below 1GHz Above 1 GHz