QBTLTK-SCTNSERVERCALL TRANSMITTER

Servercall Paging System User Manual (Manual Ver. 1.26B) LEE TECHNOLOGY KOREA CO., LTD. email [email protected] website www.leetekorea.com KOREA HEADQUARTER US OFFICE 3 rd Fl. 499-2, Sang3-dong, 530 Highland Station Drive, Suite 2004, Wonmi-gu, Bucheon City, Suwanee, GA 30024, U.S.A. Kyunggi-do, Korea Tel +82-32-324-9838 Tel +1-678-714-2161 Fax +82-32-324-9840 Fax +1-678-714-2162 Servercall Paging System User Manual Servercall Transmitter 1. System introduction - With Servercall, your servers are in constant communication with the kitchen and management teams without leaving their stations. Servers are alerted that they are needed in a discreet manner invisible to customers. 2. System Feature 3. Installation ① 4. OPERATION Write the server name next to his pager number with a dry erase marker. Warning!! Regular ink will make permanent marks, making name changes difficult-clean with a non-abrasive cleaner ONLY!! The name panels can easily be removed and replaced to simplify pager assignment. Press the number that corresponds to the servers name on the sending unit and that pager will silently vibrate. Range of this system should easily cover even the largest of restaurants. You can send a single, double or triple vibration to servers, sending them to different parts of the kitchen. For example, 1 vibe means going to the hot line, 2 vibes mean going to the salad station, etc. 1) To page a pager with a single vibe Press the corresponding pager number. If you make Set Default MSG ON, then it will vibrate once and the green LED light on top will turn on according to its saved default message. And if you make Set Default MSG OFF, it’ll work with no message. 2) To page all pagers Press ALL PAGE button more than 3 seconds and the green light comes on. All pagers will vibrate 4 times. 3) To page managers Press the MGR 91-94 button shortly and then the green light comes on for 2 seconds. When you want to page all managers, press MGR ALL button for 3 seconds. These buttons only work if you have purchased the optional manager display pager. If you did not purchase a display pager, any pager can be given to the manager and used as a manager pager. FCC ID: QBTLTK­SCTN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user’s authority to operated the equipment under FCC rules. This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co­located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 28 centimeters between the radiator and your body. Cet équipement est conforme à l'exposition de la FCC rayonnements RF limites établies pour un environnement non contrôlé. Cet appareil et son antenne ne doivent pas être co­localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Cet équipement doit être installé et utilisé avec une distance minimale de 28 centimètres entre le radiateur et votre corps. IC : 5269A­LTKSCTN Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

CONFIRMATION LETTER We, Lee Technology Korea Co., Ltd., declare that Lee Technology Korea Co., Ltd. is the same company with LEETEK. Company name : Lee Technology Korea Co., Ltd. ----------------------------------------------- September 04, 2012 / Lee, Jongchul

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Gentlemen: This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, LEETEK,would likethefollowingdocuments regardingthis submissionforFCC ID: QBTLTK­SCTN to bekeptconfidential. We are also hereby request Short­Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04­1705. This provision will give LEETEK temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: Theabovematerialcontainstradesecrets ortechnical data, whichwould customarily beguarded from competitors.We donotwantthese documents to beaccessible to thegeneral public. Sincerely Yours, Jongchul Lee / General Manager LEETEK 3rd FL.Automobile Department Store Bldg, #499-2 Sang-3dong, Wonmi-gu, Bucheon-city, Kyunggi-do, Korea

LEETEK 3rd FL.Automobile Department Store Bldg, #499-2 Sang-3dong, Wonmi-gu, Bucheon-city, Kyunggi-do, Korea Date: August23, 2012 Federal Communications Commission 7435Oakland Mills Road Columbia MD 21046 c.c. Compliance CertificationServices CertificationDivision 47173 Benicia Street Fremont, CA94538,USA To whomit may concern: I, the undersigned, herebyauthorize Lab Manager Charles. Kim(orFeel. Jeong)ofSGS Korea Co., Ltdand hereafter referred to as SGS Korea, to act onourbehalf in all manners relatingto application forequipment authorization, includingsigningofall documents relating to these matters. Anyand all acts carried outby Lab Manager Charles. Kim(orFeel. Jeong) of SGS Korea Co., Ltdon ourbehalf shall havethe same effect as acts ofourown. I, theundersigned, hereby certify that we are notsubject to a denial offederal benefits, that includes FCC benefits, pursuantto Section 5301 of theAnti-Drug Abuse Act of 1988,21U.S.C. 853(a). In authorizing SGS Korea as ouragent, we still recognize that we areresponsible to: a)comply with therelevantprovisionsofthecertificationprogram; b)makeall necessary arrangements fortheconduct oftheevaluation,includingprovisionfor examiningdocumentationandaccess to all areas, records(includinginternalaudit reports) andpersonnel forthepurposes ofevaluation(e.g.testing,inspection,assessment, surveillance, reassessment) andresolutionofcomplaints; c)makeclaims regardingcertificationonly in respect ofthescopeforwhich certificationhas been granted; d)donotuse ourproduct certificationin such a manner as to bringtheCertificationDivision into disrepute andnotmakeanystatement regardingourproduct certificationwhich the CertificationDivisionmay consider misleadingorunauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until further written notice from the applicant. Jongchul Lee / General Manager Sincerely Yours,

External photos of EUT Front view of EUT Rear view of EUT Antenna Top view of EUT Bottom view of EUT Side view of EUT

FCC/IC Label 1. FCC/IC Label Drawing LEETEK Model : LTK­SCTN FCC ID : QBTLTK­SCTN IC : 5269A­LTKSCTN Made in Korea 2. FCC/IC Label Location Bottom side of EUT

Internal photos of EUT Inner of EUT Top view of Main PCB Bottom view of Main PCB Top view of Sub PCB Bottom view of Sub PCB

Report Number:F690501/RF-RTL005713-4Page:2of40 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea INDEX TABLE OF CONTENTSPage 1. General information ---------------------------------------------------------------------------------------3 2. RF radiated output power & spurious radiated emission ----------------------------------------7 3. Receiver radiated spurious emissions ---------------------------------------------------------------14 4. 99% occupied bandwidth---------------------------------------------------------------------------------16 5. Emission masks -------------------------------------------------------------------------------------------21 6. Conducted power and transmitter conducted spurious emission -----------------------------25 7. Frequency stability ----------------------------------------------------------------------------------------29 8. Transient frequency behavior --------------------------------------------------------------------------33 9. RF exposure evaluation----------------------------------------------------------------------------------39 Report Number:F690501/RF-RTL005713-4Page:3of40 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1. General information 1.1. Testing laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 705, Dongchun-Dong Sooji-Gu, Yongin-Shi, Kyungki-Do, South Korea. - Wireless Div. 3FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible athttp://www.sgs.com/en/Terms-and-Conditions.aspx. Telephone:+82 31 428 5700 FAX:+82 31 427 2371 1.2. Details of applicant Applicant:LEE TECHNOLOGY KOREA CO. LTD. Address:3 rd FL.Automobile Department Store Bldg, #499-2 Sang-3dong, Wonmi-gu, Bucheon-city, Kyunggi-do, Korea. Contact Person:Ahn, Sang-Woon Phone No.:+82 32 324 9838 1.3. Description of EUT Kind of Product SERVERCALL TRANSMITTER Model Name LTK-SCTN Serial Number N/A Power Supply AC 100 V ~ AC 240 V Rated Power(E.R.P.) 32.20㏈m (E.R.P.) Frequency Range 450.025㎒– 469.975㎒ Modulation Type GFSK Number of Channels 9 Channel spacing 12.5㎑ Antenna type and Gain Type: External connector type(BNC) / Gain: -2.61㏈i 1.4. Type of Emission According to 90.207(e), for non-voice paging operations, only A1A, A1D, A2B, A2D, F1B F1D, F2B, F2D, G1B, G1D, G2B or G2D emissions will be authorized. Type of Emission: 11K2F1D Bn =2M +2DK M = 1200 bits per second D = 5㎑(Peak Deviation) K = 1 Bn = 2(1200bps/2) + 2(5000) = 11.2k Report Number:F690501/RF-RTL005713-4Page:4of40 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1.5. Test equipment list EquipmentManufacturerModelS/NCal Date Cal Internal Cal Due. Signal GeneratorAgilent 8648D3847M00534 Mar. 29, 2012AnnualMar. 29, 2013 Signal GeneratorR&S SMR40100272 Mar. 29, 2012AnnualMar. 29, 2013 Spectrum AnalyzerR&SFSV30100768Mar. 29, 2012 Annual Mar. 29, 2013 Modulation AnalyzerH.P.8901B3226A04314Jul. 20, 2012 Annual Jul. 20, 2013 Power SensorR&SNRP-Z81100669Apr.03, 2012 Annual Apr. 03, 2013 Four Port Junction PadAnritsuMA1612A6200311239Mar. 30, 2013 Annual Mar. 30, 2013 Power DividerWeinschel15751537Jul. 12, 2012 Annual Jul. 12, 2013 OscilloscopeTektronixDPO 3014C020192Apr. 25, 2012 Annual Apr. 25, 2013 AttenuatorMini-Circuits BW-N20W5+0950-1 Mar. 30, 2012 Annual Mar. 30, 2013 AC power SupplyKIKUSUIPCR500MQC002962Jan. 04, 2012 Annual Jan. 04, 2013 Temperature ChamberHangil TechnicsHGTP-4050HGTP-4050-04-01Aug. 17, 2012AnnualAug. 17, 2013 High Pass FilterMICROWAVE-CIRCUITSNHP-800V8207600724 Mar. 30, 2012 Annual Mar. 30, 2013 High Pass FilterWainwrightWHK3.0/18G-10SS344 Jul. 12, 2012 Annual Jul. 12, 2013 PreamplifierH.P.8447F2944A03909Jul. 03, 2012AnnualJul. 03, 2013 PreamplifierR&SSCU 1810117Jan. 12, 2012AnnualJan. 12, 2013 Test ReceiverR&SESU26100109Feb. 21, 2012 Annual Feb. 21, 2013 Bilog AntennaSCHWARZBECKVULB9163396Apr. 27, 2012 Biennial Apr. 27, 2013 Horn AntennaR&SHF 906 100326Nov. 23, 2010BiennialNov. 23, 2012 Horn AntennaSCHWARZBECKBBHA9170 BBHA9170431May 15. 2012BiennialMay 15. 2014 Dipole AntennaSCHWARZBECKUHA91059105-2514May 24. 2012BiennialMay 24. 2014 Antenna MasterINN-COMM4000 N.C.R.N.C.R.N/AN.C.R. Turn TableINN-CODS 1200 S N.C.R.N.C.R.N/AN.C.R. Anechoic ChamberSY Corporation L × W × H (9.6 m×6.4 m×6.6 m) N.C.R.N.C.R.N/AN.C.R. Report Number:F690501/RF-RTL005713-4Page:5of40 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea ▶Support equipment DescriptionManufacturerModelSerial Number N/A--- Report Number:F690501/RF-RTL005713-4Page:6of40 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGSKoreaCo.,Ltd.(GunpoLaboratory)18-34, Sa…

Text truncated - open the document above for the full version.

Test setup photos of EUT Photo of ERP& Spurious Emission Test