QC4-4GFXLSO4G V-Flex Lite (S, O)

4G INSTALLATION GUIDE Version 4.4.2.0.0.0.0 Part # 430-4G-050-00-005 © 2011 - L-1 Identity Solutions Inc. All rights reservedi Copyright Copyright Information © 2011, L-1 Identity Solutions, Inc. All rights reserved. This product and related documentation are protected by copyright and distributed under licenses restricting their use, copying, distribution, and de-compilation. No part of this product or related documentation may be reproduced in any form by any means without written permission from L-1 Identity Solutions and its licensors, if any. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the L-1 Identity Solutions, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. TRADEMARKS The trademarks identified herein are the trademarks or registered trademarks of L-1 Identity Solutions, Inc. All other brands and products referenced herein are acknowledged to be trademarks or registered trademarks of their respective holders or manufacturers. THE PRODUCT AND PUBLICATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE PUBLICATION. L-1 IDENTITY SOLUTIONS, INC MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS PUBLICATION AT ANY TIME. IMPORTANT—Please refer to the L-1 Identity Solutions End User License Agreement document and read it carefully before using any L-1 Identity Solutions software on your computer. This document contains important information about your legal rights. Part # 430-4G-050-00-005 © 2011 - L-1 Identity Solutions Inc. All rights reservedii Contents Table of Contents CHAPTER 1 - INTRODUCTION.......................................................7 CHAPTER OVERVIEW...............................................................7 1.1 SYMBOLS USED IN THIS GUIDE.................................................7 1.2 PRODUCT OVERVIEW...........................................................9 1.2.1 4G V-FLEX LITE & CR-PASS.................................................9 1.2.2 4G SECURE CONTROL.......................................................10 1.3 DEVICE DIMENSIONS.........................................................11 1.3.1 4G V-FLEX LITE..........................................................11 1.3.2 4G CR-PASS..............................................................12 1.3.3 4G SECURE CONTROL.......................................................13 1.4 SAFETY PRECAUTIONS........................................................14 1.4.1 ELECTROSTATIC DISCHARGE.................................................14 1.4.2 DEVICE HANDLING GUIDELINES..............................................15 CHAPTER 2 - PLANNING THE INSTALLATION.........................................16 CHAPTER OVERVIEW..............................................................16 2.1 PLANNING THE INSTALLATION.................................................16 2.1.1 RECOMENDED STEPS FOR A SUCCESSFUL INSTALLATION..........................17 2.1.2 REQUIREMENTS............................................................18 2.1.2.1 HARDWARE REQUIREMENTS.................................................18 2.1.2.2 COMPUTER REQUIREMENTS.................................................18 2.1.2.2.1 SECUREADMIN LITE SERVER REQUIREMENTS................................18 2.1.2.2.2 SECUREADMIN LITE CLIENT REQUIREMENTS................................19 2.1.2.2.3 MICROSOFT .NET FRAMEWORK 3.5 SP1 REQUIREMENTS.......................19 2.1.2.2.4 SUPPORTED OPERATING SYSTEMS.........................................19 2.1.2.2.5 SQL SERVER 2008 EXPRESS EDITION.....................................19 2.1.2.3 NETWORK REQUIREMENTS..................................................19 2.1.2.4 SOFTWARE REQUIREMENTS.................................................19 2.1.3 UNPACK EQUIPMENT........................................................20 2.1.3.1 PARTS LIST............................................................20 2.1.3.1.1 4G V-FLEX LITE, 4G CR-PASS..........................................20 2.1.3.1.2 4G SECURECONTROL....................................................21 2.1.3.1.3 DOCUMENTATION.......................................................21 2.1.4 CHOOSING THE INSTALL LOCATION...........................................22 2.1.4.1 4G V-Flex Lite and CR-Pass............................................22 2.1.4.2 4G SecureControl......................................................22 2.1.5 PLAN DEVICE NETWORK.....................................................22 2.1.6 CHOOSE NETWORK TYPE.....................................................23 2.1.6.1 RS-485 ...............................................................24 2.1.6.1.1 RS-485 CABLE SPECIFICATION..........................................24 2.1.6.1.2 RS-485 CABLE LENGTHS................................................25 2.1.6.1.3 RS-485 NETWORK TOPOLOGY.............................................25 2.1.6.2 ETHERNET..............................................................25 2.1.7 CHOOSE POWER SOURCE.....................................................26 Part # 430-4G-050-00-005 © 2011 - L-1 Identity Solutions Inc. All rights reservediii Contents CHAPTER 3 - INSTALL SOFTWARE..................................................27 CHAPTER OVERVIEW.....................…

Text truncated - open the document above for the full version.

Bioscrypt Inc. 50 Acadia Avenue, Suite 200, Markham, Ontario L3R 0B3 Canada Telephone 905-940-7750 Facsimile 905-940-7642 L1ID.com/EnterpriseAccess Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Apr. 15, 2011 SUBJECT: FCC Application for FCC ID: QC4-4GFXLSO To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity Authorization procedure to the Class B Unintentional Radiator portion of this composite filing. Regards, Ryan Watt Manager Hardware Engineering Bioscrypt Inc. 50 Acadia Ave., Suite 200 Markham, ON Canada L3R 0B3

June 7, 2011 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Certification Application Testing under FCC Part 15, Subpart C - Unlicensed Low Power Transmitter operating in the frequency band 13.110-14.010 MHz. Product: Fingerprint Reader Model No.: 4GFXLSO FCC ID: QC4-4GFXLSO Dear Sir/Madam: As appointed agent for Bioscrypt, Inc., we submit the application for equipment certification of the above product. Please review all required documents uploaded to your E-Filing Site. If you have any queries, please do not hesitate to contact us. Yours truly, Dan Huynh Dan Huynh Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Bioscrypt Inc. 50 Acadia Avenue, Suite 200, Markham, Ontario L3R 0B3 Canada Telephone 905-940-7750 Facsimile 905-940-7642 L1ID.com/EnterpriseAccess Apr. 15, 2011 Bioscrypt Inc. 50 Acadia Ave., Suite 200 Markham, ON Canada L3R 0B3 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Bioscrypt, Inc. FCC ID: QC4-4GFXLSO Dear Sir/Madam: I hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as my agent in preparation of this application for authorization of above equipment under F.C.C. Rules. The applicant hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a “party” for these purposes. I also certify that the information provided, properly describe the device or system for which authorization is required. Regards, Ryan Watt Manager Hardware Engineering

Bioscrypt Inc. 50 Acadia Avenue, Suite 200, Markham, Ontario L3R 0B3 Canada Telephone 905-940-7750 Facsimile 905-940-7642 L1ID.com/EnterpriseAccess Apr. 15, 2011 Bioscrypt Inc. 50 Acadia Ave., Suite 200 Markham, ON Canada L3R 0B3 To Whom It May Concern Subject: Confidentiality Letter Applicant: Bioscrypt, Inc. FCC ID: QC4-4GFXLSO Dear Sir/Madam: The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. 1. Operational Description 2. Block Diagram 3. Schematic(s) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Regards, Ryan Watt Manager Hardware Engineering

SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 5 11 2011 To: Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:OK6321 We hereby request confidential treatment of information accompanying this application as outlined below: 1. Technical Description of the circuit function and how the device operates 2. Grounding System(s) Description and Antenna(s) Description 3. Block Diagram 4. Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Robert Cresswell Manager – Compliance Engineer 15730 Barranca Parkway Irvine, CA 92618, USA

Bioscrypt Inc. 50 Acadia Avenue, Suite 200, Markham, Ontario L3R 0B3 Canada Telephone 905-940-7750 Facsimile 905-940-7642 L1ID.com/EnterpriseAccess 1. 4G V-Flex Lite Label Label Size: 37mmx30mm 4GFXLSO 4GFXLSONW 2. Label Location Label Located at the Low End of the Back (Label is not for the device)

Fingerprint Reader Model No.: 4GFXLSO FCC ID: QC4-4GFXLSO Applicant: Bioscrypt, Inc. 50 Acadia Avenue, Suite 200 Markham, Ontario Canada L3R 0B3 In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C Unlicensed Low Power Transmitter Operating in the Band 13.110-14.010 MHz UltraTech's File No.: MYT-173F15C225 This Test report is Issued under the Authority of Tri M. Luu Vice President of Engineering UltraTech Group of Labs Date: June 7, 2011 Report Prepared by: Dan Huynh Issued Date: June 7, 2011 Tested by: Hung Trinh Test Dates: May 2 ~ 16, 2011  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Part 15, Subpart C, Section 15.225 – Unlicensed Low Power Transmitter Fingerprint Reader, Model: 4GFXLSO FCC ID: QC4-4GFXLSO ULTRATECH GROUP OF LABS File #: MYT-173F15C225 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 June 7, 2011 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION.............................................................................................................................................. 1 1.1. SCOPE ........................................................................................................................................................................ 1 1.2. RELATED SUBMITTAL(S)/GRANT(S) ........................................................................................................................ 1 1.3. NORMATIVE REFERENCES ...................................................................................................................................... 1 EXHIBIT 2. PERFORMANCE ASSESSMENT.................................................................................................................... 2 2.1. CLIENT INFORMATION .............................................................................................................................................. 2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ................................................................................................... 2 2.3. EUT’S TECHNICAL SPECIFICATIONS....................................................................................................................... 3 2.4. LIST OF EUT’S PORTS............................................................................................................................................... 3 2.5. ANCILLARY EQUIPMENT ........................................................................................................................................... 3 2.6. GENERAL TEST SETUP............................................................................................................................................. 4 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS............................................... 5 3.1. CLIMATE TEST CONDITIONS.................................................................................................................................... 5 3.2. OPEPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS................................................................ 5 EXHIBIT 4. SUMMARY OF TEST RESULTS ..................................................................................................................... 6 4.1. LOCATION OF TESTS ................................................................................................................................................ 6 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS ....................................................................... 6 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES ................................................ 6 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS ............................................... 7 5.1. TEST PROCEDURES.................................................................................................................................................. 7 5.2. MEASUREMENT UNCERTAINTIES ........................................................................................................................... 7 5.3. MEASUREMENT EQUIPMENT USED ........................................................................................................................ 7 5.4. COMPLIANCE WITH FCC PART 15 – GENERAL TECHNICAL REQUIREMENTS ................................................... 7 5.5. EMISSION BANDWIDTH............................................................................................................................................. 8 5.6. FIELD STRENGTH OF EMISSIONS WITHIN & OUTSIDE THE PERMITTED BAND 13.110-14.010 MHz [47 CFR 15.225 (a) to (d)] .......................................................................................................................................... 10 5.7. FREQUENCY STABILITY [47 CFR 15.225(e)] .......................................................................................................... 12 5.8. POWER LINE CONDUCTED EMISSIONS [47 CFR 15.107(a) & 15.207] .................................................................13 EXHIBIT 6. TEST EQUIPMENT LIST ............................................................................................................................... 16 EXHIBIT 7. MEASUREMENT UNCER…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOGRAPHS Bioscrypt, Inc. Fingerprint Reader, Model 4GFXLSO FCC ID: QC4-4GFXLSO A1 - 1 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Bioscrypt, Inc. Fingerprint Reader, Model 4GFXLSO FCC ID: QC4-4GFXLSO A1 - 2 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Bioscrypt, Inc. Fingerprint Reader, Model 4GFXLSO FCC ID: QC4-4GFXLSO A1 - 3 Radiated Emissions at 10 m Distance (for frequencies below 30 MHz) ANNEX 1 - TEST SETUP PHOTOGRAPHS Bioscrypt, Inc. Fingerprint Reader, Model 4GFXLSO FCC ID: QC4-4GFXLSO A1 - 4 Radiated Emissions at 3 m Distance (30 MHz to 1000 MHz) ANNEX 1 - TEST SETUP PHOTOGRAPHS Bioscrypt, Inc. Fingerprint Reader, Model 4GFXLSO FCC ID: QC4-4GFXLSO A1 - 5 Radiated Emissions at 10 m or 3 m Distance (rear view)