QJORF2052AREMOTE SWITCH

RF2052 Indoor/Outdoor Remote Instructions 1. Plug the receiver into an outlet with power; the LED of power indicator will be light, pls power off By remote controller first. 2. Let the switch hang downward so moisture doesn’t accumlate in the outlets. 3. Plug your lights or device into receiver.The total cumulative wattage must not exceed 1000 watts. 4. Red indicator is lit when the receiver/switch is on. 5. Store indoor when not in use. Outdoor Use (RF2052C): z For best results plug your remote switch directly into a wall receptacle that is at least 1 or 2 feet above the ground with outlets facing down.This prevents snow accumulation on the remote receiver. Indoor Use (RF2052B): only in indoor use. DO NOT SUBMERGE BATTERY: z Replace battery when the red indicator light on remote does not flicker when a button is pressed. 1. Open battery door. 2. Remove old battery and dispose of properly. 3. Insert new battery. Max load: 125V AC/60Hz 8.3A/1000W, 500W 30 foot range This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

MCU Keyboard High frequency Carrier wave 315MHz

EUT - Front View EUT - Back View

FCC ID Label Sample for Model: RF2052A FCC ID: QJORF2052A

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/proposed FCC Mark Location FCC ID: QJORF2052A This device complies with Part 15 of the FCC Rules. Operation

PCB-Front View PCB-Back View

1 2 3 4 5 6 78 ABCD 8 7 6 5 4 3 2 1 D CBA Item: Part No: Description: QTY: Material: Dwg No: ADVANCED TIMER TECHNOLOGIES CO.LTD Material: Quantity: Edition: Date: Drawn by / date: Design by / date: Checked by/date: Approved by/date: Part Name: Part No: Dwg No: scale: REV NO REVISION NOTE DATE SIGATURE CHECKED Q2MMB TH1 0( C ) R14.7K C212p R2 3. 3M +12V XT1 R315MHz C1104 Q1 2907 +12V R447K ON OFF R7 10K R810K A0 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6/ D 5 7 A67 D6 8 VSS 9 A8/ D 3 10 A9/ D 2 11 A10 / D1 12 A11 / D0 13 TE 14 OSC1 15 OSC2 16 DO UT 17 VCC 18 U1PT2262 C42p LED1 R34.7K C31/10pF C54p L110uH Emitter 1 7/ 0 9/ 20 02 RF-2 05 2 A. SCH R5 10K ON 1 OFF1 D31N 4148 D1 1N 4148 D4 1 N 4148 D2 1 N 4148

FCC TEST REPORT Page 1 of 27 FCC ID : QJORF2052A Applicant : Advanced Timer Technologies Ltd. Unit 23, 3/F., Metro Centre II, 21 Lam Hing Street, Kowloon Bay, Hongkong Equipment Under Test (EUT) : Product description : Remote Switch Model No. : RF2052A Standards : FCC 15 Subpart C Paragraph 15.231 Date of Test : March 5, 2007 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 Advanced Timer Technologies Ltd. FCC ID: QJORF2052A Page 2 of 27 2 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 CONTENTS ..............................................................................................................................................................2 3 TEST SUMMARY....................................................................................................................................................5 4 GENERAL INFORMATION..................................................................................................................................6 4.1 CLIENT INFORMATION............................................................................................................................................6 4.2 GENERAL DESCRIPTION OF E.U.T...........................................................................................................................6 4.3 DETAILS OF E.U.T. .................................................................................................................................................6 4.4 DESCRIPTION OF SUPPORT UNITS...........................................................................................................................6 4.5 STANDARDS APPLICABLE FOR TESTING..................................................................................................................6 4.6 TEST FACILITY........................................................................................................................................................7 4.7 TEST LOCATION......................................................................................................................................................7 5 EQUIPMENT USED DURING TEST ...................................................................................................................8 6 CONDUCTED EMISSION TEST ..........................................................................................................................9 6.1 TEST EQUIPMENT....................................................................................................................................................9 6.2 TEST PROCEDURE...................................................................................................................................................9 6.3 CONDUCTED TEST SETUP.....................................................................................................................................10 6.4 EUT OPERATING CONDITION...............................................................................................................................10 6.5 CONDUCTED EMISSION LIMITS.............................................................................................................................11 6.6 CONDUCTED EMISSION TEST RESULT...................................................................................................................11 7 RADIATION EMISSION TEST...........................................................................................................................12 7.1 TEST EQUIPMENT..................................................................................................................................................12 7.2 MEASUREMENT UNCERTAINTY.............................................................................................................................12 7.3 TEST PROCEDURE.................................................................................................................................................12 7.4 RADIATED TEST SETUP.........................................................................................................................................13 7.5 SPECTRUM ANALYZER SETUP...............................................................................................................................13 7.6 CORRECTED AMPLITUDE & MARGIN CALCULATION............................................................................................14 7.7 SUMMARY OF TEST RESULTS................................................................................................................................14 7.8 EUT OPERATING CONDITION...............................................................................................................................15 7.9 RADIATED EMISSIONS LIMIT.................................................................................................................................15 7.10 RADIATED EMISSIONS TEST RESULT................................................................................................................16 7.10.1 Radiated Emission Test Data .....................................................................................................................16 8 PERIODIC OPERATION .....................................................................................................................................18 9 BAND EDGE ..........................................................................................................................................................22 9.1 TEST PROCEDURE.......................................................................................…

Text truncated - open the document above for the full version.

Radiation Emission Test View For 30MHz-1000MHz Radiation Emission Test View For 1GHz-5GHz