QNISMM-107ABWireless Handheld Microphone

1) Open the battery compartment. 2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside the compartment of the wireless microphone. 3) Close the battery compartment. 4) The switch on the wireless microphone has three settings: 1. ON - The switch is in the top position. The microphone will function. The red indicator light is on. 2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light is on. The purpose of this setting is to maintain a connection between the microphone and the Singing Machine when moving around the area in which it is being used. (This function could also be considered a mute function) 3. OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off. To ensure long battery life, please make sure that the wireless microphones is set to the OFF position when not in use. When not in use for a long period of time, we recommend that you remove the DC 9-V battery This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for the system. You must get a licence for the frequency you plan to use before you use the system. Please look for this websiteto apply the licence or phone to the nearest FCC offices and contact them to get the necessary application. Licensibility depends on how you will use the system. “IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the system exceeding the RF exposure requirements.” Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for wireless devices. To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face. Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wireless microphone. Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. NOTE: NOTE: Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC NOTICE For RF exposure SAFETY INFORMATION IMPORTANT from the battery compartment. http://wireless.fcc.gov/uls/ SMM-107A WIRELESS MICROPHONE OPERATION WIRELESS MICROPHONE INFORMATION 1) Open the battery compartment. 2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside the compartment of the wireless microphone. 3) Close the battery compartment. 4) The switch on the wireless microphone has three settings: 1. ON - The switch is in the top position. The microphone will function. The red indicator light is on. 2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light is on. The purpose of this setting is to maintain a connection between the microphone and the Singing Machine when moving around the area in which it is being used. (This function could also be considered a mute function) 3. OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off. To ensure long battery life, please make sure that the wireless microphones is set to the OFF position when not in use. When not in use for a long period of time, we recommend that you remove the DC 9-V battery This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for the system. You must get a licence for the frequency you plan to use before you use the system. Please look for this websiteto apply the licence or phone to the nearest FCC offices and contact them to get the necessary application. Licensibility depends on how you will use the system. “IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the system exceeding the RF exposure requirements.” Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for wireless devices. To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face. Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wireless microphone. Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, in…

Text truncated - open the document above for the full version.

SMC (Comercial Offshore De Macau) Limitada Unit 8M, The Macau Square, 43-53A Avenida do Infante D. Henrique, Praia Grande, Macau Tel: (853) 717-000 Fax: (853) 717-002 Email: [email protected] AGENCY AUTHORIZATION LETTER FCC ID: QNISMM-107A Date: June 12, 2006 To whom it may concern: We, the undersigned, hereby authorize SGS CSTC Standards Technical Services Co., Ltd. Guangzhou Branch to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, and any other activity necessary to obtain such certification. Any act carried out by SGS CSTC within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, ________________________ Company signature

SMC (Comercial Offshore De Macau) Limitada Unit 8M, The Macau Square, 43-53A Avenida do Infante D. Henrique, Praia Grande, Macau Tel: (853) 717-000 Fax: (853) 717-002 Email: [email protected] June 12, 2006 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mils Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: QNISMM-107A To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR47, the applicant requests permanent confidential treatment of the following information accompanying this application: Block Diagrams Schematics Operation Description Circuit Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ___________________________ Dora Lee Merchandising Manager

Labels FCC and IC.

产品编码(Product code) 名称(Name) 规格说明 (Specification) 物料号 (Material code) 客户名称 (Client name) 001-100101 发射成品咪 Transmitter STVD- 1001USA （TX） 19- 27S10010002 0 雅士 Arts 物料编号(Material Number) 物料名称(Material Name) 规格说明 (Specification) 单位(Unit) 需求量 (Quantity) 生产车间 (Workshop ) 备注说明 (Remark) 101-08050D1121 三极管, Audion 8050DPCS10002FQ2 101-0KSP102121 三极管, Audion KSP10PCS10002FQ5 101-S9014C4211 三极管, Audion S9014CPCS10002FQ1 101-S9018H2111 三极管, Audion S9018HPCS20002FQ3,Q4 102-1091110121 稳压二极管, Stable voltage Diode 9.1 VPCS10002FD4 102-3IN4148121 二极管, Diode IN4148PCS20002FD2,D3 102-3IN5819121 二极管, Diode IN5819PCS10002FD5 103-0103201122 灯仔 （红色）, LED(red) 3 mmPCS10002FD1 104-SC88030021 IC/集成块 SC8803(SMD) PCS10002FIC1 106-0001040110 咪芯, MIC T-104PCS10002F 107-1524707121 电阻, Resistance 47欧 1/8W ± 10% PCS10002FR25 107-1535607121 电阻, Resistance 560欧 1/8W ± 10% PCS20002FR18,R24 107-1541007121 电阻, Resistance 1K 1/8W ± 10% PCS10002FR16 107-1544707121 电阻, Resistance 4.7 K 1/8W ± 10% PCS40002F R7,R13,R1 9,R21 107-1546807121 电阻, Resistance 6.8 K 1/8W ± 10% PCS10002FR23 107-1551207121 电阻, Resistance 12 K 1/8W ± 10% PCS10002FR22 107-1551507121 电阻, Resistance 15 K 1/8W ± 10% PCS10002FR14 107-1551807121 电阻, Resistance 18 K 1/8W ± 10% PCS10002FR17 107-1552207121 电阻, Resistance 22 K 1/8W ± 10% PCS10002FR10 107-1552707121 电阻, Resistance 27 K 1/8W ± 10% PCS10002FR15 107-1553307121 电阻, Resistance 33 K 1/8W ± 10% PCS10002FR9 107-1553907121 电阻, Resistance 39 K 1/8W ± 10% PCS10002FR12 107-1554707121 电阻, Resistance 47 K 1/8W ± 10% PCS10002FR20 107-1563907121 电阻, Resistance 390 K 1/8W ± 10% PCS10002FR8 109-1230930121 瓷片电容NPO, Ceramic Capacitance 3 PF ±5%PCS10002FC28 109-1310930121 瓷片电容NPO, Ceramic Capacitance 10 PF ±5%PCS10002FC27 109-1315930121 瓷片电容NPO, Ceramic Capacitance 15 PF ±5%PCS40002F C12,C25,C 29,C32 109-1320930121 瓷片电容NPO, Ceramic Capacitance 20 PF ±5%PCS20002FC5,C6 109-1322930121 瓷片电容NPO, Ceramic Capacitance 22 PF ±5%PCS10002FC13 109-1330930121 瓷片电容NPO, Ceramic Capacitance 30 PF ±5%PCS10002FC17 109-1339930121 瓷片电容NPO, Ceramic Capacitance 39 PF ±5%PCS10002FC21 109-1347930121 瓷片电容NPO, Ceramic Capacitance 47 PF ±5%PCS10002FC30 109-1350930121 瓷片电容NPO, Ceramic Capacitance 50 PF ±5%PCS20002FC14,C23 109-2510950121 瓷片电容NPO, Ceramic Capacitance 1000 PF （简 称102P）±20% PCS70002F C18,C22,C 24,C26,C3 1,C33,C34, 109-2522950121 瓷片电容NPO, Ceramic Capacitance 2200 PF （简 称222P）±20% PCS10002FC2 109-2610950121 瓷片电容NPO, Ceramic Capacitance 10000 PF（简 称103P）±20% PCS50002F C10,C11,C 19,C36,C3 7 109-2710950121 瓷片电容NPO, Ceramic Capacitance 100000 PF（简 称104）0.1uF ±20% PCS20002FC15,C16 110-1410A50321 电解电容, electrolytic Capacitance 1 uF 50V 4 X 7 mm ±20% PCS10002FC7 110-1447A50321 电解电容, electrolytic Capacitance 4.7 uF 50V 4 X 7 mm ±20% PCS30002FC1,C3,C9 110-1610650421 电解电容, electrolytic Capacitance 100 uF 10V 5 X 7 mm ±20% PCS10002FC8 112-01C17117I1 晶体, Oscillator T171.105M 49/T PCS10002FX1 114-1222052432 色环电感, Color Code Inductor 2.2 uH 4 X 3 mm ±5% PCS20002FL7,L8 114-2130335201 空心电感/顺绕 Hollow Inductor SLRO-3.5T X 3.0 X 0.65 PCS30002FL3,L5,L6 115-7140120031 中周 107&112, Tr.Transistor 7 mm -IFT- 2Ts：4Ts （TX ） PCS10002FL1 115-9025002132 可调电感, Variable Inductor 2T5（磁芯： 3.2 X 5mm） PCS20002FL2,L4 116-B020332061 垂直柄滑动开关, Switich #988（TX） PCS10002F STVG988A (TX) 118-1102540006 线仔（黑色）, Cable(Black) UL1007 AWG28 （3+48+3mm ） PCS10002F MIC"-"TO PCB 118-1102540026 线仔（红色）, Cable(Red) UL1007 AWG28 （3+48+3mm ） PCS10002F MIC"+"TO PCB 119-2999011021 PCB（机板） G999 TXPCS10002F STVG999( TX) Tune Up procedure 1.When adjussting the RF power at manufacturing, just turn L2, L4 2.Adjust oscillator X1 and Tr.Transistor L1 for proper Transmitter frequency

Report No.: GLEMO060400965RFT Page: 1 of 14 FCC ID: QNISMM-107AB Authorized Signature: Jerry Chen Manager This report refers to the General Conditions for Inspection and Testing Services, printed overleaf This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services Ltd. No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663 FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 FCC TEST REPORT Application No. : GLEMO060400965AV Applicant : International SMC (HK) Ltd. FCC ID : QNISMM-107AB Assigned Frequency : 171.905MHz(SMM-107A) , 171.105MHz(SMM-107B) Equipment under Test (EUT): Name : Wireless Microphone Model : SMM-107A / SMM-107B Emission Designator : 75K0F3E Standards : FCC PART 90.217& 2.1047 Date of Receipt : 30 June 2006 Date of Test : 11 May to 30 June 2006 Date of Issue : 30 June 2006 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. FCC ID: QNISMM-107AB Report No.: GLEMO060400965RFT Page: 2 of 14 SGS-CSTC Standards Technical Services Ltd. 2 Test Summary Test Test Requirement Stanadard Paragraph Result Output Power FCC PART 90 Section 90.265(b) PASS Radiated Spurious Emission FCC PART 90 Section 90.217 PASS Occupied Bandwidth FCC PART 90 Section 90.265(b) PASS Frequency Stability FCC PART 90 Section 90.265(b) PASS Modulation Characteristics FCC PART 2 Section 2.1047 PASS FCC ID: QNISMM-107AB Report No.: GLEMO060400965RFT Page: 3 of 14 SGS-CSTC Standards Technical Services Ltd. 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY ....................................................................................................................................... 2 3 CONTENTS ................................................................................................................................................ 3 4 GENERAL INFORMATION........................................................................................................................ 4 4.1 CLIENT INFORMATION........................................................................................................................... 4 4.2 DETAILS OF E.U.T. ............................................................................................................................... 4 4.3 DESCRIPTION OF SUPPORT UNITS......................................................................................................... 4 4.4 TEST LOCATION.................................................................................................................................... 4 4.5 OTHER INFORMATION REQUESTED BY THE CUSTOMER........................................................................... 4 4.6 TEST FACILITY...................................................................................................................................... 5 5 TEST RESULTS ......................................................................................................................................... 6 5.1 TEST INSTRUMENTS.............................................................................................................................. 6 5.2 E.U.T. OPERATION...............................................................................................................................8 5.3 TEST PROCEDURE & MEASUREMENT DATA............................................................................................ 8 5.3.1 Carrier Radiated Power & Radiated Spurious Emissions ............................................................. 8 5.3.2 Occupied Bandwidth....................................................................................................................10 5.3.3 Frequency Stability ......................................................................................................................11 5.3.4 Modulation Characteristics .....................................................................................................12-14 FCC ID: QNISMM-107AB Report No.: GLEMO060400965RFT Page: 4 of 14 SGS-CSTC Standards Technical Services Ltd. 4 General Information 4.1 Client Information A pplicant: International SMC (HK) Ltd. Address of Applicant: Suite 1210,Ocean Centre,5 Canton Road,TST,HK 4.2 Details of E.U.T. Product Name: Wireless Microphone Model: SMM-107A Power Supply: 9.0Vdc ( 1 x ‘6F22’ Size Batteries). 4.3 Description of Support Units The EUT was tested as an independent unit: a 171.905MHz radio transmitter. 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory, No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 4.5 Other Information Requested by…

Text truncated - open the document above for the full version.