QV7-GC88606-07Remote-controlled Boat

Remote-controlled Boat

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 26, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: QV7-GC88606-07 FRN: 0022150262 [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Ivan Chen)

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 26, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: QV7-GC88606-07 FRN: 0022150262 [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Ivan Chen)

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Agent Authorization Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address: No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Product Name: Remote-controlled Boat Model Number(s): Q7, Q1, Q2, Q3, Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 Product Description: Remote-controlled Boat We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 24, 2024 Name: Ivan Chen Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD.

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Jul. 26, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : QV7-GC88606-07 Model Number: Q7, Q1, Q2, Q3, Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 To Whom It May Concern: We, The GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD hereby declare that the models are identical except the model names and the color of appearance. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Ivan Chen

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 26, 2024 Subject; Request for Confidentiality FCC ID: QV7-GC88606-07 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Ivan Chen

Report No.: AGC15705240487AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15705240487AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15705240487AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15705240487AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm&20mm FCC ID: QV7-GC88606-07

Report No.: AGC15705240487AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW-1 OF EUT INTERNAL VIEW-1 OF EUT 125mm 2.4G Antenna Report No.: AGC15705240487AP02 Page 2 of 4 INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT Report No.: AGC15705240487AP02 Page 3 of 4 INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT Report No.: AGC15705240487AP02 Page 4 of 4 INTERNAL VIEW-6 OF EUT INTERNAL VIEW-7 OF EUT ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC15705240487FH01 FCC ID : QV7-GC88606-07 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Remote-controlled Boat BRAND NAME : N/A MODEL NAME : Q7, Q1, Q2, Q3, Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 APPLICANT : GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. DATE OF ISSUE : Jul. 26, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240487FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 26, 2024 Valid Initial Release Report No.: AGC15705240487FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC15705240487FH01 Page 4 of 10 1. General Information Applicant GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Manufacturer GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Factory GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Product Designation Remote-controlled Boat Brand Name N/A Test Model Q7 Series Model Q1, Q2, Q3, Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 Difference Description All the series models are the same as the test model except for the model names and the color of appearance. Date of receipt of test item May 23, 2024 Date of Test May 23, 2024~Jul. 25, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Jul. 26, 2024 Reviewed By Calvin Liu (Reviewer) Jul. 26, 2024 Approved By Max Zhang (Authorized Officer) Jul. 26, 2024 Report No.: AGC15705240487FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: SRD 2.4G: 2.405GHz ~ 2.475GHz Hardware Version v 1.0 Software Version v 1.0 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Wire antenna Antenna Gain 2dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15705240487FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed wi…

Text truncated - open the document above for the full version.

Manufacturer: Dongguan Lixinwei Electronics Co., Ltd. 1st Floor, No. 79, Tonggu 3rd Street, Xiancun, Dalang Town, Dongguan City, Guangdong Province,China

Page 1 of 40 FCC Test Report Report No.: AGC15705240487FR01 FCC ID : QV7-GC88606-07 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Remote-controlled Boat BRAND NAME : N/A MODEL NAME : Q7, Q1, Q2, Q3, Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 APPLICANT : GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. DATE OF ISSUE : Jul. 26, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.249 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705240487FR01 Page 2 of 40 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 26, 2024 Valid Initial Release Report No.: AGC15705240487FR01 Page 3 of 40 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ..................................................................................................................... 5 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. 20dB Bandwidth Measurement .................................................................................................................... 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Results ................................................................................................................................ 17 8. Field Strength of Fundamental and Radiated Spurious Emission .......................................................... 19 8.1 Measurement Limit .................................................................................................................................... 19 8.2 Measurement Procedure ........................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 23 8.4 Measurement Result ............................................................................................................................. 23 9. AC Power Line Conducted Emission .......................................................................................................... 38 9.1 Measurement Limit .................................................................................................................................... 38 9.2 Measurement Setup (Block Diagram of Configuration) ............................................................................ 38 9.3 Preliminary Procedure of Line Conducted Emission Test …

Text truncated - open the document above for the full version.

Report No.: AGC15705240487AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15705240487AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************