QVNBTNANOLCNANOTOOTH/SUPERTOOTH NANO

User Guide Nano-Tooth Bluetooth Headset with LCD Contents _______________________________________________________________________________________________________________ A.Product Overview.............................1 B.Quick Guide ................................1 C.Switching the Nano-Tooth On/Off......................2 D.Charging the Nano-Tooth.................... ......2 E.Wearing the Nano-Tooth in your Ear.............. ......2 F.Pairing to a Mobile Phone.................. .......3 G.Nano-Tooth Operations...........................4 H.Button Functions Matrix..........................6 I.Erase All Paired Device Info............... .........6 ________________________________________________________________________________________________________________ 1 mfb or multi-function button •Power On: Short press this button until the Nano-Tooth vibrates. (If the headset is worn, press until 1 beep.) •Power Off: Very Long press until LCD displays - OFF - (or until 3 beeps). •Answer/ Hang-Up a Call: short press (1 beep) •Other Functions (See page 4 Section G. Nano-Tooth Operations) 2 LCD (Liquid Crystal Display) •displays the status of the device •displays the caller’s number A. Product Overview B. Quick Guide 1 3 ear speaker 4 ear hook •Adjustable (See page 2 Section E. Wearing the Nano-Tooth in your ear.) 5 volume up •Increase Volume: Short press at a time. (LCD vol. display: min:3 > max:10) •Erase Pairing Info: Very Long press (5 seconds) until LCD diplays ERASE. (Or until 2 beeps). (See page 6 Section I . Erase All Paired Device Info.) 6 volume down •Decrease volume: Short press at a time. (LCD vol. display: min: 3 > max: 10). •Pairing: Very Long press (5 seconds) until LCD displays PAIRI n G . (Or until 2 beeps). (See page 3 Section F. Pairing to a Mobile Phone.) 7 microphone 8 charger input •Power On: Short press mfb until the Nano-Tooth vibrates. (If you are wearing the Nano-Tooth, short press mfb until you hear 1 beep.) •Power Off: Very Long press mfb (5 seconds) until LCD displays -OFF- . (If you are wearing the Nano-Tooth, very long press mfb until 3 beeps.) When the percentage display (below the battery icon) indicates 20% or less, it means that the battery of the headset is low. Recharge the unit. 1.Plug the provided USB charger into the charger input(8) of the Nano-Tooth. 2.The LCD of the Nano-Tooth gives you information of the charging progress: CHARGE : the battery is being charged. 100%: the battery is completely charged. 3.When the headset is completely charged, unplug the charger. 1.The ear hook is flexible. It can be adjusted to any position desired depending on user’s ear shape and convenience. 2.It is also reversible. You may wear it in your left or right ear. C. Switching the Nano-Tooth On/Off D. Charging the Nano-Tooth E. Wearing the Nano-Tooth in your Ear 2 Pairing will create a link or connection between your two Bluetooth devices, the Nano-Tooth and your phone. 1.First, familiarize yourself with the parts and functions of the Nano-Tooth. (See page 1 Section A. Product Overview and Section B. Quick Guide.) 2.Ensure that the Nano-Tooth is on. If not, turn it on by shortly pressing mfb until it vibrates. (If you are wearing the Nano-Tooth, press until 1 beep is heard). 3.In standby mode, very long press volume down button (5 seconds) until the LCD displays PAIRI n G . (If you are wearing the Nano-Tooth, press until 2 beeps.) The Nano-Tooth is now in pairing mode. 4.While the headset is at pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a bluetooth search so that it will be able to search and find your Nano-Tooth. 5.When the phone displays the list of Bluetooth devices it found, select the name of this headset (Nano-Tooth). 6.When the phone asks for the passcode, enter 0000. Pairing and connection is successful if the Bluetooth icon in the LCD would change from to . Normally the phone would also show briefly on its display if it’s already paired and connected to the device or if pairing with it failed. Important Note: Some phones do not connect directly after entering 0000. To connect, you need to: Short press mfb (until 1 beep only) to completely connect. Or, (In your phone) Go back to Bluetooth > Paired devices > highlight the name of this Headset (Nano-Tooth)> press Options> then press Connect). The Nano-Tooth is now ready to use. F. Pairing to a Mobile Phone 3 Make a Call (Normal Dial): Dial the number using your phone. Normally, audio will be on the Nano-Tooth. Note: With some phones like Siemens S55 and Panasonic X70, audio is always on the phone during an outgoing call. You will need to short press mfb to transfer the audio to your headset. Make a Call (Redial): Long press mfb (until 2 beeps). The last dialed number will be redialed. Audio will be on the Nano-Tooth. Make a Call (Voice Dial): 1.First, you have to access the voice dialing function of your phone, turn it on and record for a voice tag. (Kindly refer to the procedure in your phone’s manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card! When done, execute voice dialing in your headset by proceeding with the instructions. 2.Execute Voice dial: Short press mfb (until 1 beep only). 3.Voice dial tone/beep will be heard on the headset prompting the user to say the voice tag of a contact to call. 4.Say the voice tag. The voice will be played back to you (audio on headset) then the phone will dial the number automatically. Answer a Call: (Note: If you turned on the vibrate option, the headset will vibrate while ringing during an incoming call. See Turning the Vibrate Option On or Off under this section.) Short press mfb (until 1 beep only) to answer the call. End a Call: Short press mfb (until 1 beep only). Reject a Call: Long press mfb (until 2 beeps). Incoming call will be rejected. Set the volume: Increase or decrease the volume by short pressing volume up or down button. Short press at a time until desired level is…

Text truncated - open the document above for the full version.

Federal Communication Commission Equipment Authorization Division, Application Process Branch 7435 Oakland Mills Road Columbia, MD 21048 U.S.A Dec 19, 2005 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission Rules (47 C.F.R.) and the Section §552(b)(4) of the Freedom of Information Act, Euro Communication Equipements SAS. requests confidentiality for the following products: FCCID QVN BTNANOLC For the product stated above, we request that the following information be held confidential: 1)Electrical Schematics of the Circuitry 2)Block Diagram 3)Bill of materials 4)Operational Description No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Euro Communication Equipements SAS trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Wireless microphone and wireless headset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me. Sincerely, Jason Lin Assistant Manager E&E department , SGS Taiwan

Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 2 PHOTOGRPHS OF EUT Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw All View of EUT Front View of EUT Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Back View of EUT Left View of EUT Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Top View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Euro Communication Equipements SAS.. FCC ID: QVNBTNANOLC

Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 3 PHOTOGRPHS OF EUT Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT Internal of EUT – 1 Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 2 Internal of EUT – 3 ANT Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 4

RF EXPOSURE STATEMENT 1. Standard Applicable According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a portable device. 2. Measurement Result: This is a portable device and the Max peak output power is 1.16dBm (0.00131W) lower than low threshold 60/fGHz mW (24.48mW), d<2.5cm in general population category. The SAR measurement is not necessary.

Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 Page: 1 of 53 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: NANOTOOTH / SUPERTOOTH NANO Brand Name: SUPERTOOTH Model Name: BTNANOLC FCC ID: QVNBTNANOLC Report No.: EF/2006/10003 Issue Date: Jan. 12, 2006 FCC Rule Part: §15.247 Prepared for: Euro Communication Equipements SAS. Route de Foix 11500 Nebias, Quillan, France Prepared by: SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw VERIFICATION OF COMPLIANCE Applicant: Euro Communication Equipements SAS. Route de Foix 11500 Nebias, Quillan, France Equipment Under Test: NANOTOOTH / SUPERTOOTH NANO Brand Name: SUPERTOOTH FCC ID Number: QVNBTNANOLC Model No.: BTNANOLC Model Difference: N/A File Number: EF/2006/10003 Date of test: Jan. 03, 2006 ~ Jan. 12, 2006 Date of EUT Received: Jan. 03, 2006 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Jan. 13, 2006 Henk Huang Prepared By: Date Jan. 13, 2006 Gigi Yeh Approved By: Date Jan. 13, 2006 Vincent Su Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Version Version No. Date 00 Jan. 13, 2006 Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Table of Contents 1. GENERAL INFORMATION .........................................................................................................7 1.1. Product Description ............................................................................................................................7 1.2. Related Submittal(s) / Grant (s) ..........................................................................................................7 1.3. Test Methodology ...............................................................................................................................7 1.4. Test Facility.........................................................................................................................................7 1.5. Special Accessories .............................................................................................................................7 1.6. Equipment Modifications....................................................................................................................7 2. SYSTEM TEST CONFIGURATION ............................................................................................8 2.1. EUT Configuration .............................................................................................................................8 2.2. EUT Exercise ......................................................................................................................................8 2.3. Test Procedure.....................................................................................................................................8 2.4. Configuration of Tested System..........................................................................................................9 3. SUMMARY OF TEST RESULTS ...............................................................................................10 4. DESCRIPTION OF TEST MODES ............................................................................................10 5. CONDUCTED EMISSION TEST................................................................................................11 5.1. Standard Applicable ..........................................................................................................................11 5.2. EUT Setup......................................................................................................................................…

Text truncated - open the document above for the full version.

Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 1 PHOTOGRPHS OF SET UP Report No EF/2006/10003 ID: QVNBTNANOLC Issue Date: Jan. 12, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Radiated Emission Set up Photo