QWHPPA500BTPortable PA System

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 1Read these instructions. 2Keep these instructions. 3Heed all warnings. 4Follow all instructions. 5Do not use this apparatus near water. 6Clean only with dry cloth. 7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Use only attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13Unplug this apparatus during lightning storms or when unused for long periods of time. 14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15 The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16 Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIEDUNDERTAKING OR REPRESENTATION. THIS MANUALIS COPYRIGHTED. NO PART OF THIS MANUAL MAYBE REPRODUCED OR TRANSMITTED IN ANY FORMOR BY ANY MEANS, ELECTRONIC OR MECHANICAL,INCLUDING PHOTOCOPYING AND RECORDING OF ANYKIND, FOR ANY PURPOSE WITHOUT THE EXPRESSWRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2013MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146,Road Town, Tortola, British Virgin Islands LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at www.music-group.com/warranty . EUROPORTPPA2000BT/PPA500BT Set-up Step 1: Hook-Up Debate Centre de débat Podiumsdiskussion Step 2: Set-up 1,Release the top latch beneath the carrying handle 2,Release the side latches by pressing and then lifting them. 3,Remove the speakers and place them in appropriate locations. 4,Stand the mixer upright.(Make sure the include speaker cables can reach both speakers) Step 3: Controls. FXknob determines how much of each channel’s signal goes to the DIGITAL EFFECTS PROCESSOR. EQ KNOBS adjust the high and low frequencies for each channel. PAN knob positions each channel in the stereo field. LEVEL knob adjusts the volume of the individual channel in the overall mix. CLIP LED lights when the input signals overloads the channel. PROGRAM[PUSH] knob controls the effects settings. Rotate this knob to scroll through the effect patches, and push to select a patch. MULTI-FX PROCESSOR unit adds a selected sound effect to any channels which have their EFFECTS knob turned up. Effects include reverb, chorus, delay, and pitch shifter. FX[LEVEL] knob controls the amount of effects added to the main mix. GRAPHIC EQ adjusts specific frequencies in the sound spectrum. EQ button activates the GRAPHIC EQ. FBQ button activates the FBQ detection system. The EQ IN button must also be activated for this feature to work. MAIN LEVEL CONTROL adjusts the overall volume of the main mix. The MODE s…

Text truncated - open the document above for the full version.

RF Exposure: A distance of 20 cm shall be maintained between the antenna and users

Uni-Art Precise Products Ltd 11-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name MUSIC Group Macao Commercial Offshore Limited Addresss Rua De Pequim, No 202-A Macau Finance Centre 9/J, Macau City Macau Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: QWH PPA500BT of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) Operational Description Block Diagrams Schematics Diagrams Part list Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Macau China 2013-12-25 Eric Zhang Compliance manager

Uni-Art Precise Products Ltd 11-12/F,Yue Xiu Industrial Building,87 Hung To Road,Kowloon,Hong Kong FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name MUSIC Group Macao Commercial Offshore Limited Address Rua De Pequim, No 202-A Macau Finance Centre 9/J, Macau City Macau Country China declare that the following representative (agent): Name (person) Ruby Zhang Function Supervisor Company name Compliance Certification Services (Shenzhen) Inc. Addresss No10-1, Mingkeda Logistics Park, No.18 Huanguan South RD. Guan lan Town, Baoan District, Shenzhen China City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Portable PA System Type or Model(s) PPA500BT Tradename or Brand(s) Behringer We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Macau China 2013-12-25 Eric Zhang Compliance manager

Report No: C131213Z01-RP1 Page 1 / 8 External Photos of EUT Main Report No: C131213Z01-RP1 Page 2 / 8 VICE 1# Report No: C131213Z01-RP1 Page 3 / 8 Report No: C131213Z01-RP1 Page 4 / 8 VICE 2# Report No: C131213Z01-RP1 Page 5 / 8 Report No: C131213Z01-RP1 Page 6 / 8 Report No: C131213Z01-RP1 Page 7 / 8 Report No: C131213Z01-RP1 Page 8 / 8

Label Design (page 1) and Label Position (page 2) FCC ID: QWHPPA500BT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Label Position

Report No: C131213Z01-RP1 Page 1 / 9 Internal Photos of EUT Report No: C131213Z01-RP1 Page 2 / 9 Report No: C131213Z01-RP1 Page 3 / 9 Report No: C131213Z01-RP1 Page 4 / 9 Report No: C131213Z01-RP1 Page 5 / 9 Report No: C131213Z01-RP1 Page 6 / 9 Report No: C131213Z01-RP1 Page 7 / 9 Report No: C131213Z01-RP1 Page 8 / 9 Report No: C131213Z01-RP1 Page 9 / 9

Compliance Certification Services Inc. Report No: C131213Z01-RP1_MPE FCC ID: QWHPPA500BT Date of Issue: December 20, 2013 1 RADIO FREQUENCY EXPOSURE LIMIT Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See §15.247(b)(4) and §1.1307(b)(1) of this chapter. EUT Specification EUT Portable PA System Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz~ 2.480GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others __________________________ Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 1.47dBm (1.40mW) Antenna gain (Max) 2.12dBi (Numeric gain:1.63) Evaluation applied MPE Evaluation SAR Evaluation Note: 1. The maximum output power is 1.47dBm (1.40mW) at 2441MHz (with 1.63 numeric antenna gain.) 2. For mobile or fixed location transmitters, no SAR consideration applied. The minimum separation generally be used is at least 20 cm, even if the calculations indicate that the MPE distance would be lesser. TEST RESULT No non-compliance noted. Compliance Certification Services Inc. Report No: C131213Z01-RP1_MPE FCC ID: QWHPPA500BT Date of Issue: December 20, 2013 2 Calculation Given 2 4d GP S Π × = Equation 1 Where d = distance in cm P = Power in mW G = Numeric antenna gain S = Power Density in mW / cm 2 Maximum Permissible Exposure EUT Output Power=1.40mW Numeric antenna gain=1.63 Substituting the MPE safe distance using d=20 cm into Equation 1: Fields The power density S = 1.40 × 1.63/ (4∏ × 400) cm 2 =4.54*e -4 mW/cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW / cm 2 even if the calculation indicates that the power density would be larger.)

Report No.: C131213Z01-RP1 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST or any government agencies. The test result of this report relate only to the tested sample identified in this report. FCC ID: QWHPPA500BT Page 1 / 65 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Portable PA System Model: PPA500BT Brand: Test Report Number: C131213Z01-RP1 Prepared for MUSIC Group Macao Commercial Offshore Limited Rua Du Pequim, No 202-A Macau Finance Centre 9/J, Macau Prepared by COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC. No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen China TEL: 86-755-28055000 FAX: 86-755-28055221 Issued Date: December 20, 2013 Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 2 of 65 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue No. Revisions Effect Page Revised By 00 C131213Z01-RP1 Initial Issue ALL Sinphy Xie Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 3 of 65 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION.............................................................................................. 4 2. EUT DESCRIPTION..................................................................................................................... 5 3. TEST METHODOLOGY.............................................................................................................. 7 3.1 DESCRIPTION OF TEST MODES ................................................................................7 4. FACILITIES AND ACCREDITATIONS..................................................................................... 8 4.1 FACILITIES....................................................................................................................8 4.2 ACCREDITATIONS .......................................................................................................8 4.3 MEASUREMENT UNCERTAINTY ................................................................................8 5. SETUP OF EQUIPMENT UNDER TEST.................................................................................. 9 5.1 SETUP CONFIGURATION OF EUT .............................................................................9 5.2 SUPPORT EQUIPMENT .............................................................................................9 6. FCC PART 15.247 REQUIREMENTS..................................................................................... 10 6.1 20DB BANDWIDTH .....................................................................................................10 6.2 PEAK POWER.............................................................................................................14 6.3 PEAK POWER SPECTRAL DENSITY ........................................................................19 6.4 BAND EDGES MEASUREMENT ................................................................................20 6.5 FREQUENCY SEPARATION ......................................................................................30 6.6 NUMBER OF HOPPING FREQUENCY ......................................................................33 6.7 TIME OF OCCUPANCY (DWELL TIME) .....................................................................36 6.8 SPURIOUS EMISSIONS .............................................................................................43 6.9 POWERLINE CONDUCTED EMISSIONS ..................................................................63 Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 4 of 65 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. TEST RESULT CERTIFICATION Product: Portable PA System Model: PPA500BT Brand: Tested: December 13~19, 2013 Applicant: MUSIC Group Macao Commercial Offshore Limited Rua Du Pequim, No 202-A Macau Finance Centre 9/J, Macau Manufacture MUSIC Group Macao Commercial Offshore Limited Rua Du Pequim, No 202-A Macau Finance Centre 9/J, Macau Factory Zhongshan Eurotec Electronics Ltd. Eurotec Industrial Park #1 Junjing Rd., Min Zhong Town, Zhongshan, Guangdong 528441 China. APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.207, 15.209 and 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Tom Gan Supervisor of EMC Dept. Compliance Certification Service Inc. Ruby Zhang Supervisor of Report Dept. Compliance Certification Service Inc. Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 5 of 65 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2. EUT DESCRIPTION Product Portable PA System Model Number PPA500BT Brand Model Discrepancy N/A Identify Number C131213Z01-RP1 Power Supply 100-120Vac, 50/60Hz; MIC cable Unshielded, 6.20m Speaker out Cable Unshielded, 6.20m×2 Received Date December 13, 2013 Frequency Range 2402 ~ 2480 MHz Transmit Power GFSK : 1.47dBm 8DPSK : 0.31dBm Modulation Technique FHSS (GFSK for 1…

Text truncated - open the document above for the full version.

Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 1/2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: C131213Z01-RP1 FCC ID: QWHPPA500BT Page 2/2 RADIATED EMISSION TEST Below 1GHz Above 1GHz