QWHTRUTH5Studio Monitors

User Manual TRUTH 3.5/4.5 Audiophile 3.5"/4.5" Studio Monitors with Advanced Waveguide Technology TRUTH 3.5 BT/3.5 BT-WH/TRUTH 4.5 BT/ 4.5 BT-WH/ TRUTH 5 BT/TRUTH 5 BT-WH/TRUTH 8S BT Audiophile 3.5"/4.5"/5.0"/8.0" Studio Monitors with Bluetooth Connectivity and Advanced Waveguide Technology V 1.0 2TRUTH 3.5/4.5/3.5 BT/3.5 BT-WH/4.5 BT/4.5 BT-WH/5 BT/5 BT-WH/8S BTQuick Start Guide3 (EN) Safety Instructions Please read these safety instructions carefully and pay close attention to any warning symbols displayed on the product and their related safety information in this instruction. Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions. Please read full manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. Warning Please refer to the information on the exterior of bottom enclosure for electrical and safety information before installing or operating the device. Warning To prevent possible hearing damage, do not listen at high volume levels for long periods. As a guide to setting the volume level, check that you can still hear your own voice, when speaking normally while listening with the headphones. 1. Read and keep these instructions. Heed all warnings and follow all instructions. 2. Do not use this apparatus near water (if applicable). Clean only with dry cloth. 3. Do not block ventilation openings (if applicable). Do not install in a confined space. Install only according to manufacturer's instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not place naked flame sources, such as lighted candles, on the apparatus. 5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other (only for USA and Canada). A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 6. (If applicable) Protect the power cord from being walked on or pinched particularly as plugs, convenience receptacles, and the point where they exit from the apparatus. 7. Use only attachments and accessories recommended by the manufacturer. 8. Use only specified carts, stands, tripods, brackets, or tables specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 9. Unplug during storms, or if not in use for a long period. 10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. (If applicable)The apparatus with protective earthing terminal shall be connected to a MAINS socket outlet with a protective earthing connection. 12. (If applicable)Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 13. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with proper plug or alternative voltage by a qualified service technician. Do not attempt to alter this yourself. 14. Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with "Class II Wiring" requires Class II wiring installed by an instructed person or the use of ready-made leads or cords. 15. Operating temperature range 5° to 45° C (41° to 113° F). LEGAL DISCLAIMER The information contained in this Quick Start Guide and accompanying manual is provided for general guidance only. While every effort has been made to ensure the accuracy and reliability of the content at the time of publication, Music Tribe Global Brands Ltd. (“Music Tribe”) makes no representations or warranties, express or implied, as to the completeness, accuracy, or suitability of the information, descriptions, illustrations, or technical specifications herein. Music Tribe accepts no liability for any direct, indirect, incidental, or consequential loss or damage arising from reliance on the information contained in this document, including but not limited to loss of data, income, profits, or business opportunities. Use of the product remains the sole responsibility of the user. Product features, design, specifications, and visual representations may be updated or modified without prior notice in the interest of continuous product improvement. All third-party trad…

Text truncated - open the document above for the full version.

Rev 1/26/2023 (Empower Tribe Commercial FZE) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-22-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: QWHTRUTH5 [Empower Tribe Commercial FZE] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Empower Tribe Commercial FZE] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Kane Xin Rev 1/26/2023 (Empower Tribe Commercial FZE) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-22-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: QWHTRUTH5 [Empower Tribe Commercial FZE] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Kane Xin

To Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-12-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: [QWH] Applicant FRN: [0022048235] [Empower Tribe Commercial FZE] (“the applicant”) certifies that, as of the date of the filing of the application, [Empower Tribe Innovations US Inc. ] is our designated U.S. agent for service of process for the above referenced FCC ID. [Empower Tribe Commercial FZE] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Empower Tribe Innovations US Inc. ] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Empower Tribe Innovations US Inc. U.S. Agent FRN: The agent for service of process does no other business with the FCC and does not have an FRN. Address: 901 Grier Dr. Las Vegas, NV, 89119, USA Contact Person: Chase McKnight Tel.: 702-389-6913 Email: [email protected] Sincerely, [Empower Tribe Commercial FZE] [Empower Tribe Innovations US Inc. ] Kane Xin Chase McKnight [Insert Applicant signature] [U.S. Agent signature]

Empower Tribe Commercial FZE Date: 2025-09-05 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: QWHTRUTH5 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----- Kane Xin --------- Grantee Contact’s Signature Empower Tribe Commercial FZE

Model Declaration Letter Date: 2025-09-22 We, the undersigning company Company Name: Empower Tribe Commercial FZE Address: LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Hereby confirm that the following products: Product description: Studio Monitors Type Design: TRUTH 5 BT, TRUTH 5 BT-WH Brand: Behringer The differences of model name show below: Models TRUTH 5 BTM and TRUTH 5 BT-WH are identical except for model name. Only differ in model name and colour. Signature: Name: Kane Xin Telephone: +971 526477773 E-mail: [email protected]

Empower Tribe Commercial FZE Declaration of Authorization We Name: Empower Tribe Commercial FZE Address: LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: Studio Monitors Type designation: TRUTH 5 BT, TRUTH 5 BT-WH Trademark: Behringer FCC ID: QWHTRUTH5 on our behalf. Date:2025-09-22 City: Dubai Name: Kane Xin Function: Innovation Compliance Leader Signature:

Project No.: 2506C419 Page 2 of 36 TRUTH 5 BT Project No.: 2506C419 Page 3 of 36 Project No.: 2506C419 Page 4 of 36 Project No.: 2506C419 Page 5 of 36 Project No.: 2506C419 Page 6 of 36 Project No.: 2506C419 Page 7 of 36 Project No.: 2506C419 Page 8 of 36 Project No.: 2506C419 Page 9 of 36

Project No.: 2506C419 Page 10 of 36 Project No.: 2506C419 Page 11 of 36 Project No.: 2506C419 Page 12 of 36 ANT Project No.: 2506C419 Page 13 of 36 Project No.: 2506C419 Page 14 of 36 Project No.: 2506C419 Page 15 of 36 Project No.: 2506C419 Page 16 of 36 Project No.: 2506C419 Page 17 of 36 Project No.: 2506C419 Page 18 of 36 Project No.: 2506C419 Page 19 of 36 Project No.: 2506C419 Page 20 of 36 Project No.: 2506C419 Page 21 of 36 Project No.: 2506C419 Page 22 of 36 Project No.: 2506C419 Page 23 of 36

Project No.: 2506C419 Page 24 of 36 Project No.: 2506C419 Page 25 of 36 Project No.: 2506C419 Page 26 of 36 Project No.: 2506C419 Page 27 of 36 TRUTH 5 BT-WH Project No.: 2506C419 Page 28 of 36 Project No.: 2506C419 Page 29 of 36 Project No.: 2506C419 Page 30 of 36 Project No.: 2506C419 Page 31 of 36 Project No.: 2506C419 Page 32 of 36 Project No.: 2506C419 Page 33 of 36 Project No.: 2506C419 Page 34 of 36 Project No.: 2506C419 Page 35 of 36 ANT Project No.: 2506C419 Page 36 of 36

Report No.: BTL-FCCP-2-2506C419 Report Version: R00 Page 1 of 3 FCC RF EXPOSURE REPORT FCC ID: QWHTRUTH5 Project No. : 2506C419 Equipment : Studio Monitors Brand Name : Behringer Test Model : TRUTH 5 BT Model Name : TRUTH 5 BT, TRUTH 5 BT-WH Hardware Version : V0.5 Software Version : V16 Applicant : Empower Tribe Commercial FZE Address : LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Manufacturer : Empower Tribe Commercial FZE Address : LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Factory : 1) Zhongshan Eurotec Electronics Ltd. 2) Zhong Shan City LITAI Electronic Industrial Co., Ltd. Address : 1) NO.10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, PEOPLE'S REPUBLIC OF CHINA 2) No.3 Industrial Park, Chenggui Road, Wuguishan Town, 528458 Zhongshan, Guangdong, PEOPLE’s REPUBLIC OF CHINA Date of Receipt : Jun. 25, 2025 Date of Test : Jun. 25, 2025~Aug. 04, 2025 Issued Date : Sep. 18, 2025 Test Sample : Engineering Sample No.: DG20250625101 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091 & KDB 447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2506C419 Report Version: R00 Page 2 of 3 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2506C419 R00 Original Report. Sep. 18, 2025 Valid Report No.: BTL-FCCP-2-2506C419 Report Version: R00 Page 3 of 3 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. ANTENNA SPECIFICATION Ant. Manufacturer Model Name Antenna Type Connector Gain (dBi) 1 ZhongShan City Li Tai Electronic Industrial Co., Ltd. N/A PCB N/A 1.5 Note: The antenna gain is provided by the manufacturer. 3. CALCULATED RESULT Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 1.5 1.4125 3.62 2.3014 0.00065 1 Complies (1) The calculated distance is 20 cm. End of Test Report

Antenna Specification Product Name PCB Antenna Manufacturer ZhongShan City Li Tai Electronic Industrial Co., Ltd. Frequency e.g.2402~2480MHz Antenna Type PCB Antenna Antenna peak gain 1.5 dBi V.S.W.R e.g. ≤2.0 Impedance e.g. 50 Ohm Operating Temp. Range 0 °C ~ 85 °C Size 3.2mm X 10mm X 1mm Can the antennas be transmitted simultaneously? N0 Outside view drawing for Antenna:

Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 1 of 78 FCC Radio Test Report FCC ID: QWHTRUTH5 This report concerns: Original Grant Project No. : 2506C419 Equipment : Studio Monitors Brand Name : Behringer Model Name : TRUTH 5 BT, TRUTH 5 BT-WH Applicant : Empower Tribe Commercial FZE Address : LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Manufacturer : Empower Tribe Commercial FZE Address : LB181504WS13, Jebel Ali Freezone Dubai, United Arab Emirates Factory : 1) Zhongshan Eurotec Electronics Ltd. 2) Zhong Shan City LITAI Electronic Industrial Co., Ltd. Address : 1) NO.10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, PEOPLE'S REPUBLIC OF CHINA 2) No.3 Industrial Park, Chenggui Road, Wuguishan Town, 528458 Zhongshan, Guangdong, PEOPLE’s REPUBLIC OF CHINA Date of Receipt : Jun. 25, 2025 Date of Test : Jun. 25, 2025~Aug. 04, 2025 Issued Date : Sep. 18, 2025 Test Sample : Engineering Sample No.: DG20250625101 for Conducted, DG20250625100 for Radiated 30MHz-1GHz, DG20250625102,for others Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 2 of 78 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 3 of 78 Table of Contents Page REVISION HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 SUPPORT UNITS 14 3.6 CUSTOMER INFORMATION DESCRIPTION 14 4 . AC POWER LINE CONDUCTED EMISSIONS 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 15 4.3 DEVIATION FROM TEST STANDARD 15 4.4 TEST SETUP 16 4.5 EUT OPERATING CONDITIONS 16 4.6 TEST RESULTS 16 5 . RADIATED EMISSIONS 17 5.1 LIMIT 17 5.2 TEST PROCEDURE 18 5.3 DEVIATION FROM TEST STANDARD 19 5.4 TEST SETUP 19 5.5 EUT OPERATING CONDITIONS 21 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 21 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 21 5.8 TEST RESULTS - ABOVE 1000 MHZ 21 6 . NUMBER OF HOPPING FREQUENCY 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 4 of 78 Table of Contents Page 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . AVERAGE TIME OF OCCUPANCY 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . HOPPING CHANNEL SEPARATION 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . BANDWIDTH 25 9.1 LIMIT 25 9.2 TEST PROCEDURE 25 9.3 DEVIATION FROM STANDARD 25 9.4 TEST SETUP 25 9.5 EUT OPERATION CONDITIONS 25 9.6 TEST RESULTS 25 10 . MAXIMUM OUTPUT POWER 26 10.1 LIMIT 26 10.2 TEST PROCEDURE 26 10.3 DEVIATION FROM STANDARD 26 10.4 TEST SETUP 26 10.5 EUT OPERATION CONDITIONS 26 10.6 TEST RESULTS 26 11 . CONDUCTED SPURIOUS EMISSION 27 11.1 LIMIT 27 11.2 TEST PROCEDURE 27 Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 5 of 78 Table of Contents Page 11.3 DEVIATION FROM STANDARD 27 11.4 TEST SETUP 27 11.5 EUT OPERATION CONDITIONS 27 11.6 TEST RESULTS 27 12 . MEASUREMENT INSTRUMENTS LIST 28 13 . EUT TEST PHOTO 30 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 36 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 39 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 44 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 47 APPENDIX E - NUMBER OF HOPPING FREQUENCY 60 APPENDIX F - AVERAGE TIME OF OCCUPA…

Text truncated - open the document above for the full version.

Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 30 of 78 13. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 31 of 78 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 32 of 78 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 33 of 78 Radiated Emissions Test Photos Band edge & Harmonic(1 GHz to 18 GHz) Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 34 of 78 Radiated Emissions Test Photos Harmonic(18 GHz to 26.5 GHz) Report No.:BTL-FCCP-1-2506C419 Report Version: R00 Page 35 of 78 Conducted Test Photos