R3UDSBT2Wireless headphone

EPOS IMPACT 10xx 2s EPOS Connect eposaudio.com/impact1000 EPOS Connect

IMPACT 1060 ANC / 1061 ANC / 1060T ANC / ANC 1061T ANC IMPACT 1060 / 1061 / 1060T / 1061T IMPACT 1030 / 1030T BTD 800a | Charge stand CH 40 In compliance with: IMPACT 10xx headsets (DSBT2 | DSBT3 | DSBT6) BTD 800a USB dongle (DSBT1) Charge stand (DSWD6) USA FCC ID: R3UDSBT2 | R3UDSBT3 | R3UDSBT6 FCC ID: R3UDSBT1 FCC ID: R3UDSWD6 Canada IC: 2099D-DSBT2 CAN ICES-3(B)/NMB-3(B) IC: 2099D-DSBT1 CAN ICES-3(B)/NMB-3(B) IC: 2099D-DSWD6 CAN ICES-3(B)/NMB-3(B) EU A v wAw Aw UK Australia/ New Zealand I Singapore Complies with IMDA Standards DA108496 Taiwan, China S CCAF22LP0740T4– Japan Q & DSBT2,DSBT3: 201-230124 DSBT6: 201-230125 Q & 201-220176– China c CMIIT ID: c CMIIT ID: 2022DJ7804 c CMIIT ID: Vietnam ,ʒ
Uʺ
OHŸZ

UI OH

OÂN

D D
TɲO
QIɸN
ÄáʲD
TɲO
YVɴU
CʮJ
DSEA A/S
UV¡O
UIʶ
5I³OH
Uá
30/2011/TT-BCT RVZ
ÄʚOI
Wʐ
HJʪJ
IɰO
DIP
QI ̈Q
ÄʠJ
WʪJ
NʨU
Tʠ
DIɴU
ÄʨD
IɰJ
USPOH
D D
TɲO
QIɸN
ÄJʖO
WŸ
ÄJʖO
Uʼ Thailand This radio communication device is exempted from license to have and use radio communication device or set up radio communication station according to the Notification of NBTC Re: Radio communication devices and radio communication station exempted from license of radio communication according to the Radio Communications Act B.E. 2498 (1955). NBTC Telecommunication | Supervision for public | Call center 1200 (free call) India IS 616/ IEC 60065 IS 16046 (Part 2):2018 IEC 62133-2:2017 R-41203912/R-41143022 www.bis.gov.in –– EN USA & Canada Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC rules and Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. Changes or modifi cations made to this equipment not expressly approved by manufacturer may void the FCC authorization to operate this equipment. RF Radiation Exposure Information The device complies with FCC and Innovation, Science and Economic Development Canada’s RF radiation exposure limits set forth for a an uncontrolled environment. Use of other accessories not verifi ed by the manufacturer may not ensure compliance with FCC/Innovation, Science and Economic Development Canada’s RF exposure guidelines. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter. Bluetooth frequency range 2402 – 2480 MHz RF output powerHeadset: max. 14.5 dBm (EIRP) Dongle: max. 8.0 dBm (EIRP) FR Canada Déclaration requise par la d’Innovation, Sciences et Développement économique Canada L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Information sur l‘exposition aux radiofréquences Cet équipement est conforme aux limites d ‘exposition aux rayonnements d’Innovation, Sciences et Développement économique Canada établies par la norme RSS-102 pour un environnement non contrôlé. L‘utilisation d‘autres accessoires non homologués par le fabricant remet en cause la conformité aux normes imposées par Innovation, Sciences et Développement économique Canada. Une réduction supplémentaire de l’exposition aux RF peut être obtenue si le produit peut être maintenu aussi loin que possible du corps de l’utilisateur ou si l’appareil est réglé sur une puissance de sortie inférieure, si cette fonction est disponible. Ces transmetteurs ne doivent pas être placés au même endroit ou utilisés simultanément avec un autre transmetteur ou antenne. Responsible party Demant Sound USA, Inc. Little Falls Drive, Wilmington 19800, New Castle, USA Tel: +1 800-332-7439 ZH-CHS CHINA RoHS DSBT2 | DSBT3 | DSBT6 | DSBT1 | DSWD6 剣嫩剣㹱暟餘䧴⯋稆 鿇⟝せ獥 Parts ꜍ Pb 寎 Hg ꞑ Cd Ⱈ⟞Ꜵ Cr +6 㢳徂翫薅 PBB 㢳徂✳薅ꄍ PBDE 歏騟垷㗌 Circuit Modules xoo ooo 劤邌呓⣛䰘SJ/T 11364涸錞㹀綘ⵖկ o : 邌爙霪剣㹱暟餘㖈霪鿇⟝䨽剣㖱餘勞俱⚥涸ろꆀ㖱㖈GB/T 26572 錞㹀涸ꣲꆀ銲実⟃♴կ x : 邌爙霪剣㹱暟餘荚㼰㖈霪鿇⟝涸厤♧㖱餘勞俱⚥涸ろꆀ馄⳿ GB/T 26572錞㹀涸ꣲꆀ銲実կ DSEA A/SEPOS AUDIO UK Ltd. Kongebakken 9, DK-2765 Smørum, Denmark 3800 Parkside, Birmingham B37 7YG, UK eposaudio.comPrinted in China, 03/23, 770-00427/A01 Trademarks The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DSEA A/S is under license. USB Type-C ® and USB-C ® are trademarks of USB Implementers Forum. All other trademarks…

Text truncated - open the document above for the full version.

Bestimmungsgemäßer Gebrauch/Haftung Dieses Produkt ist für den Anschluss an einen Computer oder eine Spiele-Konsole konzipiert. Das Produkt darf ausschließlich im privaten Bereich verwendet werden. Es ist nicht für eine gewerbliche Nutzung vorgesehen. Als nicht bestimmungsgemäßer Gebrauch gilt, wenn Sie dieses Produkt anders benutzen, als in den zugehörigen Produktanleitungen beschrieben. DSEA übernimmt keine Haftung bei Missbrauch oder nicht ordnungsgemäßem Gebrauch des Produkts sowie der Zusatzgeräte/ Zubehörteile. Im Falle eines USB-Headsets: DSEA haftet nicht für Schäden an USB- Geräten, die nicht mit den USB-Spezifi kationen im Einklang sind. DSEA haftet nicht für Schäden aus Verbindungsabbrüchen wegen leerer oder überalterter Akkus oder Überschreiten des Sendebereichs. Herstellererklärungen Garantie DSEA A/S übernimmt für dieses Produkt eine Garantie von 24 Monaten. Die aktuell geltenden Garantie bedingungen können Sie über das Internet eposaudio.com oder Ihren DSEA-Partner beziehen. Hinweise zur Entsorgung Das Symbol der durchgestrichenen, rollbaren Mülltonne auf Produkt, Batterie/Akku und/oder Verpackung weist darauf hin, dass diese Produkte am Ende ihrer Lebensdauer nicht über den normalen Hausmüll entsorgt werden dürfen, sondern einer separaten Entsorgung zuzuführen sind. Beachten Sie für die Entsorgung der Verpackung die in Ihrem Land geltenden gesetzlichen Bestimmungen zur Abfalltrennung. Weitere Informationen zum Recycling dieser Produkte erhalten Sie bei Ihrer lokalen Verwaltung, den kommunalen Rückgabestellen oder bei Ihrem DSEA-Partner. Das separate Sammeln von Elektro- und Elektronik- Altgeräten, Batterien/Akkus und Verpackungen dient dazu, die Wiederverwendung und/oder Verwertung zu fördern und negative Eff ekte, beispielsweise durch potenziell enthaltene Schadstoff e, zu vermeiden. Hiermit leisten Sie einen wichtigen Beitrag zum Umwelt- und Gesundheitsschutz. u EU-Konformitätserklärung Hiermit erklärt DSEA A/S, dass das Funkgerät der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: eposaudio.com. FR Instructions de sécurité importantes >Veuillez lire attentivement et entièrement le manuel d’utilisation, le guide de sécurité et le guide rapide (fourni) avant d’utiliser le produit. >Toujours inclure ce guide de sécurité lors du passage du produit à des tiers. >Ne pas utiliser un produit visiblement défectueux. >N’utiliser le produit que dans des environnements où la transmission sans fi l est autorisée. >Ne pas utiliser le micro-casque à bord d’un avion, sauf en cas d’autorisation spécifi que du personnel navigant. >Veuillez observer les règles spécifi ques à chaque pays avant d’utiliser le produit ! Prévention des risques pour la santé et accidents >Ne pas écouter à un volume élevé pendant de longues périodes afi n d‘éviter les dégâts auditifs. >Le produit génère des champs magnétiques permanents qui peuvent interférer avec les stimulateurs cardiaques, les défi brillateurs implantables (DCI) et autres implants. Toujours maintenir une distance d’au moins 3,94 pouces/10 cm entre le composant du produit qui contient l’aimant et le stimulateur cardiaque, défi brillateur implantable ou autre implant. >En cas d’écouteurs intra-auriculaires : Ne pas insérer les écouteurs intra-auriculaires trop profondément dans les oreilles et ne jamais les insérer sans adaptateurs auriculaires. Toujours extraire les écouteurs intra-auriculaires de vos oreilles doucement et soigneusement. >Conserver le produit, les accessoires et les parties de l’emballage hors de portée des enfants et des animaux afi n d’éviter les accidents et les risques d’étouff ement. >Se reporter au code de la route national concernant l’utilisation des appareils de communication au volant. Prévention des dégâts sur le produit et mauvais fonctionnement >Toujours maintenir le produit au sec et ne pas exposer à des températures extrêmes (sèche-cheveux, chauff age, exposition prolongée au soleil, etc.) afi n d‘éviter toute corrosion ou déformation. >Utiliser uniquement les raccordements/accessoires fournis ou recommandés par DSEA. >Nettoyer uniquement le produit avec un chiff on doux et sec. >Protéger le produit contre les produits chimiques contenus dans les cosmétiques, la laque pour cheveux, le parfum, la lotion après- rasage, la lotion solaire et les répulsifs anti-insectes puisqu’ils peuvent endommager le produit. Instructions de sécurité pour les batteries lithium rechargeables AVERTISSEMENT Dans des cas extrêmes, les batteries rechargeables peuvent fuir et causer les dangers suivants en cas de mauvaise utilisation : • explosion • départ d’incendie • génération de chaleur • émanation de gaz ou fumées Mettre les produits défectueux avec des batteries rechargeables intégrées au rebut dans des points de collecte spéciaux ou rendez-les à votre revendeur spécialisé. N’utiliser que des batteries rechargeables recommandées par DSEA avec des chargeurs adaptés. Ne charger que des batteries rechargeables à température ambiante entre 10 °C / 50 °F et 40 °C / 104 °F. Ne pas chauffer au-delà de +70 °C/158 °F, par ex. ne pas exposer aux rayons du soleil ou mettre au feu. Utilisation conforme / responsabilité Ce produit est conçu pour être connecté à un ordinateur ou une console de jeu. Ce produit est conçu pour un usage privé uniquement. Il n’est pas adapté à une utilisation commerciale. Il est considéré comme une utilisation incorrecte lorsque ce produit est utilisé pour toute application non mentionnée dans les guides des produits associés. DSEA n‘accepte aucune responsabilité pour les dommages résultant d‘une utilisation abusive ou erronée de ce produit et de ses accessoires. En cas de micro-casque USB : DSEA n‘est pas responsable des dégâts sur les appareils USB qui ne respectent pas les spécifi cations USB. DSEA n’est pas responsable des dommages résultant de la perte de connexion suite à des batteries rechargeables totalement déchargées ou…

Text truncated - open the document above for the full version.

Page 1 of 1 DSEA A/S Kongebakken 9 DK-2765 Smoerum Denmark eposaudio.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: March 16, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may conc ern, DSEA A/S (“the applicant”) certifies that the equipment FCC ID: R 3UDSBT2 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC r ules. DSEA A/S (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E-mail: [email protected] Tel.: +45 56180000

DSEA A/S Kongebakken 9 DK-2765 Smoerum Denmark eposaudio.com Page 1 of 1 Date: 2023-02-17 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: R3UDSBT2 Product name: Bluetooth headphone To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of models DSBT2, DSBT3, DSBT6 to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E-mail : [email protected] Tel. : +45 56180000

Date: February 17, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: R3UDSBT2 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply wit h the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2023/6/1. ☒I nternal Photographs ☒External Photographs ☒User's manual ☒T est Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒Block Diagram ☒Schematics ☒Operational Description T he above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : ____ _____________________________ Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E- mail: [email protected] Te l .: +45 56180000

Project No.: EP313102 Page No. : 1 of 59 Photographs of EUT Model: DSBT2 Project No.: EP313102 Page No. : 2 of 59 Project No.: EP313102 Page No. : 3 of 59 Project No.: EP313102 Page No. : 4 of 59 Project No.: EP313102 Page No. : 5 of 59 Model: DSBT3 Project No.: EP313102 Page No. : 6 of 59 Project No.: EP313102 Page No. : 7 of 59 Project No.: EP313102 Page No. : 8 of 59 Project No.: EP313102 Page No. : 9 of 59 Model: DSBT6 Project No.: EP313102 Page No. : 10 of 59 Project No.: EP313102 Page No. : 11 of 59 Project No.: EP313102 Page No. : 12 of 59 Project No.: EP313102 Page No. : 13 of 59 Project No.: EP313102 Page No. : 14 of 59 Project No.: EP313102 Page No. : 15 of 59 Project No.: EP313102 Page No. : 16 of 59 Project No.: EP313102 Page No. : 17 of 59 Project No.: EP313102 Page No. : 18 of 59 Project No.: EP313102 Page No. : 19 of 59 Project No.: EP313102 Page No. : 20 of 59

E P O S A U D I O U K L t d . 3 8 0 0 P a r k s i d e , B i r m i n g h a m B 3 7 7 Y G , U K D S E A A / S , K o n g e b a k k e n 9 , D K - 2 7 6 5 S m ø r u m , D e n m a r k M a d e i n C h i n a CAN ICES-3(B)/NMB-3(B) Place holder for Device ID label 15x7mm FCC ID: R3UDSBT2 IC: 2099D-DSBT2 R-R-D38-DSBT2 CMIIT ID: xxxxxxxxxx IS 616/ IEC 60065 R-xxxxxxxx www.bis.gov.in LLL-NNNNNN CCMMnnWWwwwZzX X-00000 IMPACT 1060T ANC HS Device ID. A00461 xyyww 00001 Model: DSBT2 IMPACT 1030T HS Device ID. A00462 xyyww 00001 Model: DSBT6 IMPACT 1060 HS Device ID. A00459 xyyww 00001 Model: DSBT3

Project No.: EP313102 Page No. : 21 of 59 Model: DSBT2 Project No.: EP313102 Page No. : 22 of 59 Project No.: EP313102 Page No. : 23 of 59 Project No.: EP313102 Page No. : 24 of 59 Project No.: EP313102 Page No. : 25 of 59 Project No.: EP313102 Page No. : 26 of 59 Project No.: EP313102 Page No. : 27 of 59 Project No.: EP313102 Page No. : 28 of 59 Project No.: EP313102 Page No. : 29 of 59 Project No.: EP313102 Page No. : 30 of 59 Project No.: EP313102 Page No. : 31 of 59 Project No.: EP313102 Page No. : 32 of 59 Project No.: EP313102 Page No. : 33 of 59 Project No.: EP313102 Page No. : 34 of 59 Model: DSBT3 Project No.: EP313102 Page No. : 35 of 59 Project No.: EP313102 Page No. : 36 of 59 Project No.: EP313102 Page No. : 37 of 59 Project No.: EP313102 Page No. : 38 of 59 Project No.: EP313102 Page No. : 39 of 59 Project No.: EP313102 Page No. : 40 of 59 Project No.: EP313102 Page No. : 41 of 59 Project No.: EP313102 Page No. : 42 of 59 Project No.: EP313102 Page No. : 43 of 59 Project No.: EP313102 Page No. : 44 of 59 Project No.: EP313102 Page No. : 45 of 59 Project No.: EP313102 Page No. : 46 of 59 Project No.: EP313102 Page No. : 47 of 59 Project No.: EP313102 Page No. : 48 of 59 Model: DSBT6 Project No.: EP313102 Page No. : 49 of 59 Project No.: EP313102 Page No. : 50 of 59 Project No.: EP313102 Page No. : 51 of 59 Project No.: EP313102 Page No. : 52 of 59 Project No.: EP313102 Page No. : 53 of 59 Project No.: EP313102 Page No. : 54 of 59 Project No.: EP313102 Page No. : 55 of 59 Project No.: EP313102 Page No. : 56 of 59 Project No.: EP313102 Page No. : 57 of 59 Project No.: EP313102 Page No. : 58 of 59 Project No.: EP313102 Page No. : 59 of 59

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2023/3/11 System Check_Head_2450MHz DUT: D2450V2-929 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_230311 Medium parameters used : f = 2450 MHz; σ = 1.818 S/m; ε r = 39.761; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: ES3DV3 - SN3115; ConvF(4.57, 4.57, 4.57) @ 2450 MHz; Calibrated: 2022/10/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn853; Calibrated: 2022/7/20 - Phantom: SAM_Left; Type: QD000P40CD; Serial: TP:1684 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 3.66 W/kg Pin=50mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 43.20 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 5.35 W/kg SAR(1 g) = 2.67 W/kg; SAR(10 g) = 1.27 W/kg Maximum value of SAR (measured) = 3.52 W/kg 0 dB = 3.66 W/kg = 5.63 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2023/3/11 #01_Bluetooth_1Mbps_Left Cheek_Ch39 Communication System: Bluetooth; Frequency: 2441 MHz;Duty Cycle: 1:1.267 Medium: HSL_2450_230311 Medium parameters used : f = 2441 MHz; σ = 1.815 S/m; ε r = 39.815; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: ES3DV3 - SN3115; ConvF(4.57, 4.57, 4.57) @ 2441 MHz; Calibrated: 2022/10/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn853; Calibrated: 2022/7/20 - Phantom: SAM_Left; Type: QD000P40CD; Serial: TP:1684 - Measurement SW: DASY52, Version 52.10 (4);SEMCAD X Version 14.6.14 (7483) Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0329 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.153 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.0430 W/kg SAR(1 g) = 0.026 W/kg; SAR(10 g) = 0.016 W/kg Maximum value of SAR (measured) = 0.0312 W/kg 0 dB = 0.0329 W/kg = -14.83 dBW/kg

TEL : 886-3-327-3456 Page 1 of 20 FAX : 886-3-328-4978 Issued Date : Mar. 28, 2023 Template version: 211220 FCC SAR TEST REPORT Report No. : FA320215 FCC SAR TEST REPORT FCC ID : R3UDSBT2 Equipment : Wireless headphone Brand Name : EPOS Model Name : DSBT2 DSBT3 DSBT6 Applicant : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Manufacturer : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Mar. 08, 2023 and testing was started from Mar. 11, 2023 and completed on Mar. 11, 2023. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 20 FAX : 886-3-328-4978 Issued Date : Mar. 28, 2023 Template version: 211220 FCC SAR TEST REPORT Report No. : FA320215 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Guidance Applied .......................................................................................................................................................... 4 3. Equipment Under Test (EUT) Information ................................................................................................................... 5 3.1 General Information ............................................................................................................................................... 5 4. RF Exposure Limits....................................................................................................................................................... 6 4.1 Uncontrolled Environment ...................................................................................................................................... 6 4.2 Controlled Environment .......................................................................................................................................... 6 5. Specific Absorption Rate (SAR) ................................................................................................................................... 7 5.1 Introduction ............................................................................................................................................................ 7 5.2 SAR Definition ........................................................................................................................................................ 7 6. System Description and Setup .................................................................................................................................... 8 6.1 Test Site Location ................................................................................................................................................... 8 6.2 E-Field Probe ......................................................................................................................................................... 9 6.3 Data Acquisition Electronics (DAE) ........................................................................................................................ 9 6.4 Phantom ................................................................................................................................................................10 6.5 Device Holder........................................................................................................................................................ 11 7. Measurement Procedures ...........................................................................................................................................12 7.1 Spatial Peak SAR Evaluation ................................................................................................................................12 7.2 Power Reference Measurement............................................................................................................................13 7.3 Area Scan .............................................................................................................................................................13 7.4 Zoom Scan ............................................................................................................................................................14 7.5 Volume Scan Procedures ......................................................................................................................................14 7.6 Power Drift Monitoring ...........................................................................................................................................14 8. Test Equipment List .....................................................................................................................................................15 9. System Verification ......................................................................................................................................................16 9.1 Tissue Verification .................................................................................................................................................16 9.2 System Performance Check Results .....................................................................................................................16 10. Bluetooth Output Power (Unit: dBm) .....................................…

Text truncated - open the document above for the full version.

Report No.: FR313102AE Page : 1 of 20 Report Version: Rev. 01 FCC Test Report FCC ID : R3UDSBT2 Product Description : Wireless headphone Model No. : DSBT2 ; DSBT3 ; DSBT6 (see item 1.1.1 for more details) Brand Name : EPOS Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Standard : 47 CFR FCC Part 15.247 Received Date : Jan. 31, 2023 Tested Date : Feb. 15 ~ Feb. 24, 2023 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR313102AE Page : 2 of 20 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 8 1.3 Test Setup Chart .................................................................................................................................... 8 1.4 Test Equipment List and Calibration Data ............................................................................................ 10 1.5 Test Standards ..................................................................................................................................... 11 1.6 Reference Guidance ............................................................................................................................ 11 1.7 Deviation from Test Standard and Measurement Procedure ............................................................... 11 1.8 Measurement Uncertainty .................................................................................................................... 11 2 TEST CONFIGURATION ..................................................................................................................... 12 2.1 Testing Facility ............................................................................................................…

Text truncated - open the document above for the full version.