R3UDSWD6Wireless Charger

EPOS IMPACT 10xx 2s EPOS Connect eposaudio.com/impact1000 EPOS Connect

IMPACT 1060 ANC / 1061 ANC / 1060T ANC / 1061T ANC IMPACT 1060 / 1061 / 1060T / 1061T IMPACT 1030 / 1030T BTD 800a | Charge stand CH 40 In compliance with: IMPACT 10xx headsets (DSBT2 | DSBT3 | DSBT6) BTD 800a USB dongle (DSBT1) CH 40 Charge stand (DSWD6) USA FCC ID: R3UDSBT2FCC ID: R3UDSBT1FCC ID: R3UDSWD6 Canada IC: 2099D-DSBT2 CAN ICES-3(B)/NMB-3(B) IC: 2099D-DSBT1 CAN ICES-3(B)/NMB-3(B) CAN RSS-216/CNR-216 EU A v w A w A w UK Australia/ New Zealand I Singapore Complies with IMDA Standards DA108496 Taiwan, China S DSBT2: CCAF23LP0730T9 DSBT3: CCAF23LP073AT1 DSBT6: CCAF23LP073BT0 S CCAF22LP0740T4 S CCAF23LP0720T6 Japan Q & DSBT2, DSBT3: 201-230124 DSBT6: 201-230125 Q & 201-220176– China c CMIIT ID: DSBT2: 2023DJ5155 DSBT3: 2023DJ5168 c CMIIT ID: 2022DJ7804 – Vietnam Kể từ ngày 1 tháng 12 năm 2012, các sản phẩm được sản xuất bởi DSEA A/S tuân thủ Thông tư 30/2011/TT-BCT quy định về giới hạn cho phép đối với một số chất độc hại trong các sản phẩm điện và điện tử. Thailand This radio communication device is exempted from license to have and use radio communication device or set up radio communication station according to the Notification of NBTC Re: Radio communication devices and radio communication station exempted from license of radio communication according to the Radio Communications Act B.E. 2498 (1955). NBTC Telecommunication | Supervision for public | Call center 1200 (free call) India IS 616/ IEC 60065 IS 16046 (Part 2):2018 IEC 62133-2:2017 www.bis.gov.in R-41203912/R-41143022 www.bis.gov.in –– Argentina DSBT2: C-29249 DSBT3: C-29250 DSBT6: C-29252 – H-29251 EN USA & Canada Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC rules and Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • In crease the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications made to this equipment not expressly approved by manufacturer may void the FCC authorization to operate this equipment. RF Radiation Exposure Information The device complies with FCC and Innovation, Science and Economic Development Canada’s RF radiation exposure limits set forth for a an uncontrolled environment. Use of other accessories not verified by the manufacturer may not ensure compliance with FCC/Innovation, Science and Economic Development Canada’s RF exposure guidelines. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The wireless charger should be installed and operated with minimum distance of 20 cm between the radiator and your body. These transmitters must not be co-located or operated in conjunction with any other antenna or transmitter. Bluetooth frequency range 2402 – 2480 MHz RF output powerHeadset: max. 12.2 dBm (EIRP) Dongle: m ax. 8.0 dBm (EIRP) FR Canada Déclaration requise par la d’Innovation, Sciences et Développement économique Canada L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L ’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Information sur l‘exposition aux radiofréquences Cet équipement est conforme aux limites d ‘exposition aux rayonnements d’Innovation, Sciences et Développement économique Canada établies par la norme RSS-102 pour un environnement non contrôlé. L‘utilisation d‘autres accessoires non homologués par le fabricant remet en cause la conformité aux normes imposées par Innovation, Sciences et Développement économique Canada. Une réduction supplémentaire de l’exposition aux RF peut être obtenue si le produit peut être maintenu aussi loin que possible du corps de l’utilisateur ou si l’appareil est réglé sur une puissance de sortie inférieure, si cette fonction est disponible. Cette chargeur sans fil doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Ces transmetteurs ne doivent pas être placés au même endroit ou utilisés simultanément avec un autre transmetteur ou antenne. Responsible party Demant Sound USA, Inc. Little Falls Drive, Wilmington 19800, New Castle, USA Tel: +1 800-332-7439 ZH-CHS CHINA RoHS DSBT2 | DSBT3 | DSBT6 | DSBT1 | DSWD6 有毒有害物质或元素 部件名称 Parts 铅 Pb 汞 Hg 镉 Cd 六价铬 Cr +6 多溴联苯 PBB 多溴二苯醚 PBDE 电路模块 Circuit Modules xooooo 本表格依据SJ/T 11364的规定编制。 o : 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。 x : 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572规…

Text truncated - open the document above for the full version.

Bestimmungsgemäßer Gebrauch/Haftung Dieses Produkt ist für den Anschluss an einen Computer oder eine Spiele-Konsole konzipiert. Das Produkt darf ausschließlich im privaten Bereich verwendet werden. Es ist nicht für eine gewerbliche Nutzung vorgesehen. Als nicht bestimmungsgemäßer Gebrauch gilt, wenn Sie dieses Produkt anders benutzen, als in den zugehörigen Produktanleitungen beschrieben. DSEA übernimmt keine Haftung bei Missbrauch oder nicht ordnungsgemäßem Gebrauch des Produkts sowie der Zusatzgeräte/ Zubehörteile. Im Falle eines USB-Headsets: DSEA haftet nicht für Schäden an USB- Geräten, die nicht mit den USB-Spezifi kationen im Einklang sind. DSEA haftet nicht für Schäden aus Verbindungsabbrüchen wegen leerer oder überalterter Akkus oder Überschreiten des Sendebereichs. Herstellererklärungen Garantie DSEA A/S übernimmt für dieses Produkt eine Garantie von 24 Monaten. Die aktuell geltenden Garantie bedingungen können Sie über das Internet eposaudio.com oder Ihren DSEA-Partner beziehen. Hinweise zur Entsorgung Das Symbol der durchgestrichenen, rollbaren Mülltonne auf Produkt, Batterie/Akku und/oder Verpackung weist darauf hin, dass diese Produkte am Ende ihrer Lebensdauer nicht über den normalen Hausmüll entsorgt werden dürfen, sondern einer separaten Entsorgung zuzuführen sind. Beachten Sie für die Entsorgung der Verpackung die in Ihrem Land geltenden gesetzlichen Bestimmungen zur Abfalltrennung. Weitere Informationen zum Recycling dieser Produkte erhalten Sie bei Ihrer lokalen Verwaltung, den kommunalen Rückgabestellen oder bei Ihrem DSEA-Partner. Das separate Sammeln von Elektro- und Elektronik- Altgeräten, Batterien/Akkus und Verpackungen dient dazu, die Wiederverwendung und/oder Verwertung zu fördern und negative Eff ekte, beispielsweise durch potenziell enthaltene Schadstoff e, zu vermeiden. Hiermit leisten Sie einen wichtigen Beitrag zum Umwelt- und Gesundheitsschutz. u EU-Konformitätserklärung Hiermit erklärt DSEA A/S, dass das Funkgerät der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: eposaudio.com. FR Instructions de sécurité importantes >Veuillez lire attentivement et entièrement le manuel d’utilisation, le guide de sécurité et le guide rapide (fourni) avant d’utiliser le produit. >Toujours inclure ce guide de sécurité lors du passage du produit à des tiers. >Ne pas utiliser un produit visiblement défectueux. >N’utiliser le produit que dans des environnements où la transmission sans fi l est autorisée. >Ne pas utiliser le micro-casque à bord d’un avion, sauf en cas d’autorisation spécifi que du personnel navigant. >Veuillez observer les règles spécifi ques à chaque pays avant d’utiliser le produit ! Prévention des risques pour la santé et accidents >Ne pas écouter à un volume élevé pendant de longues périodes afi n d‘éviter les dégâts auditifs. >Le produit génère des champs magnétiques permanents qui peuvent interférer avec les stimulateurs cardiaques, les défi brillateurs implantables (DCI) et autres implants. Toujours maintenir une distance d’au moins 3,94 pouces/10 cm entre le composant du produit qui contient l’aimant et le stimulateur cardiaque, défi brillateur implantable ou autre implant. >En cas d’écouteurs intra-auriculaires : Ne pas insérer les écouteurs intra-auriculaires trop profondément dans les oreilles et ne jamais les insérer sans adaptateurs auriculaires. Toujours extraire les écouteurs intra-auriculaires de vos oreilles doucement et soigneusement. >Conserver le produit, les accessoires et les parties de l’emballage hors de portée des enfants et des animaux afi n d’éviter les accidents et les risques d’étouff ement. >Se reporter au code de la route national concernant l’utilisation des appareils de communication au volant. Prévention des dégâts sur le produit et mauvais fonctionnement >Toujours maintenir le produit au sec et ne pas exposer à des températures extrêmes (sèche-cheveux, chauff age, exposition prolongée au soleil, etc.) afi n d‘éviter toute corrosion ou déformation. >Utiliser uniquement les raccordements/accessoires fournis ou recommandés par DSEA. >Nettoyer uniquement le produit avec un chiff on doux et sec. >Protéger le produit contre les produits chimiques contenus dans les cosmétiques, la laque pour cheveux, le parfum, la lotion après- rasage, la lotion solaire et les répulsifs anti-insectes puisqu’ils peuvent endommager le produit. Instructions de sécurité pour les batteries lithium rechargeables AVERTISSEMENT Dans des cas extrêmes, les batteries rechargeables peuvent fuir et causer les dangers suivants en cas de mauvaise utilisation : • explosion • départ d’incendie • génération de chaleur • émanation de gaz ou fumées Mettre les produits défectueux avec des batteries rechargeables intégrées au rebut dans des points de collecte spéciaux ou rendez-les à votre revendeur spécialisé. N’utiliser que des batteries rechargeables recommandées par DSEA avec des chargeurs adaptés. Ne charger que des batteries rechargeables à température ambiante entre 10 °C / 50 °F et 40 °C / 104 °F. Ne pas chauffer au-delà de +70 °C/158 °F, par ex. ne pas exposer aux rayons du soleil ou mettre au feu. Utilisation conforme / responsabilité Ce produit est conçu pour être connecté à un ordinateur ou une console de jeu. Ce produit est conçu pour un usage privé uniquement. Il n’est pas adapté à une utilisation commerciale. Il est considéré comme une utilisation incorrecte lorsque ce produit est utilisé pour toute application non mentionnée dans les guides des produits associés. DSEA n‘accepte aucune responsabilité pour les dommages résultant d‘une utilisation abusive ou erronée de ce produit et de ses accessoires. En cas de micro-casque USB : DSEA n‘est pas responsable des dégâts sur les appareils USB qui ne respectent pas les spécifi cations USB. DSEA n’est pas responsable des dommages résultant de la perte de connexion suite à des batteries rechargeables totalement déchargées ou…

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: April 14, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, DSEA A/S (“the applicant”) certifies that the equipment FCC ID: R3UDSWD6 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. DSEA A/S (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E-mail : [email protected] Tel. : +45 56180000

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, DSEA A/S, R3U, Ernest Mayer, R3UDSWD6, FRN: 0010808749 (“the applicant”) certifies that, as of the date of the filing of application, Scott Houston (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address, email for the designated agent are: Physical U.S. address: 166 Main st Old Saybrook, CT O6475, USA Email: [email protected] FRN: 0010808749 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Ernest Mayer Name: Scott Houston Title: Regulatory Compliance Manager Title: Field Sales Engineer Email: [email protected] Email: [email protected] Date: 2023-04-17 Date:2023-04-14

Date: March 17, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: R3UDSWD6 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply wit h the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual mark eting of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2023/6/1. ☒Internal Photographs ☒External Photographs ☒User's manual ☒Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒Block Diagram ☒Schematics ☒Operational Description The ab ove materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : _______ __________________________ Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E- mail: [email protected] Te l .: +45 56180000

DSEA A/S Kongebakken 9 DK-2765 Smoerum Denmark eposaudio.com Page 1 of 1 Date: 2023/3/28 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: R3UDSWD6 Product name: CH 40 To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model DSWD6 to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : DSEA A/S Address : Kongebakken 9, DK-2765 Smoerum, Denmark Signature : Name and Job Title. : Ole Fihl Mollerup Director, Contract Manufacturing, Global Operations E-mail : [email protected] Tel. : +45 56180000

PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 1 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 2 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 3 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 4 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01

EPOS AUDIO UK Ltd. 3800 Parkside, Birmingham B37 7YG, UK Model: DSWD6 Made in China DSEA A/S, Kongebakken 9, DK-2765 Smørum, Denmark FCC ID: R3UDSWD6 IC: 2099D-DSWD6 CAN ICES-3(B)/NMB-3(B) CH 40 0XXX A00460 R-R-D38-DSWD6 Label location FCC ID: R3UDSWD6 IC: 2099D-DSWD6

PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 5 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 6 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 7 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 8 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 PHOTOGRAPHS OF EUT EP321408 Sporton International Inc. Page No. : 9 of 9 Report Template No.: SE Ver 1.0_EP Issued Date : 13/Apr/2023 Report Version : 01 ______________THE END______________

Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 1 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 Maximum Permissible Exposure FCC ID : R3UDSWD6 Equipment : Wireless Charger Brand Name : EPOS Model Name : DSWD6 Applicant : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Manufacturer : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Standard : 47 CFR Part 2.1091 The product was received on Feb. 14, 2023, and testing was started from Mar. 12, 2023 and completed on Mar. 12, 2023. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in 47 CFR Part 2.1091 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 2 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 5 1.3 Testing Location Information .................................................................................................................. 5 2 HUMAN EXPOSURE ASSESSMENT ................................................................................................... 6 2.1 Maximum Permissible Exposure ............................................................................................................ 6 3 TEST EQUIPMENT AND CALIBRATION DATA .................................................................................. 8 4 MEASUREMENT UNCERTAINTY ........................................................................................................ 9 APPENDIX A. TEST PHOTOS PHOTOGRAPHS OF EUT V01 Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 3 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 History of this test report Report No. Version Description Issued Date FA321408NF 01 Initial issue of report Apr. 13, 2023 Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 4 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Maximum Permissible Exposure PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None Reviewed by: Ben Tseng Report Producer: Ann Hou Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 5 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 1 General Description 1.1 Information 1.1.1 EUT General Information RF General Information Evaluation Mode Frequency Range Operating Frequency Modulation Type WPC 112-148.5 kHz 143.4 kHz ASK 1.1.2 Antenna Information Ant. Brand Model Name Antenna Type Connector 1 INJONIC Technology IP6808UA Coil N/A 1.1.3 Support Equipment Support Equipment No. Equipment Brand Name Model Name FCC ID Remark 1 Notebook DELL E5410 - - 2 Adapter for NB DELL HA65NM130 - - 3 Headset EPOS DSBT2 - - 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR Part 2.1091 The following reference test guidance is not within the scope of accreditation of TAF:  KDB680106 D01 RF Exposure Wireless Charging Apps v03r01 1.3 Testing Location Information Test Lab.：Sporton International Inc. Hsinhua Laboratory Hsinhua ADD: No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) (TAF: 3785) TEL: 886-3-327-3456 FAX: 886-3-327-0973 Test site Designation No. TW3785 with FCC. Test Condition Test Site No. Test Engineer Test Environment Test Date RF Conducted TH01-HY Vivi Jiang 22.2~23.8°C / 50~54% 12/Mar/2023 Maximum Permissible Exposure Report No. : FA321408NF TEL : 886-3-327-3456 Page Number : 6 of 9 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-A2 Ver4.2 Report Version : 01 FCC ID: R3UDSWD6 2 Human Exposure Assessment 2.1 Maximum Permissible Exposure 2.1.1 Limit of Maximum Permissible Exposure (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1…

Text truncated - open the document above for the full version.

FCC Radio Test Report Report No. : FR321408AW TEL : 886-3-327-3456 Page Number : 1 of 17 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-C5 Ver4.1 Report Version : 01 FCC ID: R3UDSWD6 FCC Radio Test Report FCC ID : R3UDSWD6 Equipment : Wireless Charger Brand Name : EPOS Model Name : DSWD6 Applicant : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Manufacturer : DSEA A/S Kongebakken 9, DK-2765 Smoerum, Denmark Standard : 47 CFR FCC Part 15, Subpart C The product was received on Feb. 14, 2023, and testing was started from Mar. 15, 2023 and completed on Mar. 20, 2023. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC Radio Test Report Report No. : FR321408AW TEL : 886-3-327-3456 Page Number : 2 of 17 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-C5 Ver4.1 Report Version : 01 FCC ID: R3UDSWD6 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 6 1.3 Testing Location Information .................................................................................................................. 6 1.4 Measurement Uncertainty ...................................................................................................................... 6 2 TEST CONFIGURATION OF EUT......................................................................................................... 7 2.1 Test Channel Mode ................................................................................................................................ 7 2.2 The Worst Case Configuration ............................................................................................................... 7 2.3 The Worst Case Measurement Configuration ........................................................................................ 7 2.4 Support Equipment ................................................................................................................................. 8 2.5 Test Setup Diagram ............................................................................................................................... 9 3 TRANSMITTER TEST RESULT .......................................................................................................... 11 3.1 AC Power-line Conducted Emissions .................................................................................................. 11 3.2 Transmitter Radiated Emissions .......................................................................................................... 13 3.3 Emission Bandwidth ............................................................................................................................. 16 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 17 APPENDIX A. TEST RESULT OF AC POWER-LINE CONDUCTED EMISSIONS APPENDIX B. TEST RESULT OF TRANSMITTER RADIATED EMISSIONS APPENDIX C. TEST RESULT OF EMISSION BANDWIDTH APPENDIX D. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC Radio Test Report Report No. : FR321408AW TEL : 886-3-327-3456 Page Number : 3 of 17 FAX : 886-3-327-0973 Issued Date : Apr. 13, 2023 Report Template No.: HE1-C5 Ver4.1 Report Version : 01 FCC ID: R3UDSWD6 History of this test report Report No. Version Description Issued Date FR321408AW 01 Initial is…

Text truncated - open the document above for the full version.