R5Q-TOBYL100LTE Data Transmitter Module

TOBY-L1 series LTE modules System Integration Manual Abstract This document describes the features and the system integration of TOBY-L1 series LTE wireless modules. These modules are a complete and cost efficient 4G solution offering 100 Mb/s download, 50 Mb/s upload, and covering up to 3 LTE Bands in the compact TOBY form factor. www.u-blox.com 35.6 x 24.8 x 2.6 mm locate, communicate, accelerate TOBY-L1 series - System Integration Manual UBX-13001482 Objective Information Page 2 of 85 Document Information Title TOBY-L1 series Subtitle LTE modules Document type System Integration Manual Document number UBX-13001482 Document status Objective Information Document status information Objective Specification This document contains target values. Revised and supplementary data will be published later. Advance Information This document contains data based on early testing. Revised and supplementary data will be published later. Preliminary This document contains data from product verification. Revised and supplementary data may be published later. Released This document contains the final product specification. This document applies to the following products: Name Type number Firmware version PCN / IN TOBY-L100 TOBY-L100-00S-00 G0.V.00.00.08 TOBY-L110 TOBY-L110-00S-00 G0.EE.00.00.08 This document and the use of any information contained therein, is subject to the acceptance of the u-blox terms and conditions. They can be downloaded from www.u-blox.com. u-blox makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. u-blox reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © 2013, u-blox AG. u-blox ® is a registered trademark of u-blox Holding AG in the EU and other countries. Trademark Notice Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. TOBY-L1 series - System Integration Manual UBX-13001482 Objective Information Preface Page 3 of 85 Preface u-blox Technical Documentation As part of our commitment to customer support, u-blox maintains an extensive volume of technical documentation for our products. In addition to our product-specific technical data sheets, the following manuals are available to assist u-blox customers in product design and development. AT Commands Manual: This document provides the description of the supported AT commands by the TOBY-L1 series modules to verify all implemented functionalities. System Integration Manual: This manual provides hardware design instructions and information on how to set up production and final product tests. Application Note: document provides general design instructions and information that applies to all u-blox Wireless modules. See Related documents section for a list of Application Notes related to your Wireless Module. How to use this Manual The TOBY-L1 series System Integration Manual provides the necessary information to successfully design and configure the u-blox wireless modules. This manual has a modular structure. It is not necessary to read it from the beginning to the end. The following symbols are used to highlight important information within the manual: An index finger points out key information pertaining to module integration and performance. A warning symbol indicates actions that could negatively impact or damage the module. Questions If you have any questions about u-blox Wireless Integration:  Read this manual carefully.  Contact our information service on the homepage http://www.u-blox.com  Read the questions and answers on our FAQ database on the homepage http://www.u-blox.com Technical Support Worldwide Web Our website (www.u-blox.com) is a rich pool of information. Product information, technical documents and helpful FAQ can be accessed 24h a day. By E-mail Contact the closest Technical Support office by email. Use our service pool email addresses rather than any personal email address of our staff. This makes sure that your request is processed as soon as possible. You will find the contact details at the end of the document. Helpful Information when Contacting Technical Support When contacting Technical Support, have the following information ready:  Module type (e.g. TOBY-L100) and firmware version  Module configuration  Clear description of your question or the problem  A short description of the application  Your complete contact details TOBY-L1 series - System Integration Manual UBX-13001482 Objective Information Contents Page 4 of 85 Contents Preface ................................................................................................................................ 3 Contents .............................................................................................................................. 4 1 System description ....................................................................................................... 7 1.1 Overview .............................................................................................................................................. 7 1.2 Architecture .......................................................................................................................................... 9 1.2.1 Internal blocks ............................................................................................................................. 10 1.3 Pin-out ............................................................................................................................................... 11 1.4 Operating modes ..........................................................…

Text truncated - open the document above for the full version.

Page 1 of 1 12626 High Bluff Drive, Suite 200 Aug 14, 2013 San Diego, CA 92130 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL RE: System Integration Manual Model#: TOBY-L100 FCC ID: R5Q-TOBYL100 IC ID: 8595B-TOBYL100 To Whom It May Concern: Please be advised that the System Integration Manual is still going through review process for the TOBYL100. The final revision will be provided to TUV SUD BABT once it is completed. Sincerely, Jake Bascon Certification Engineer u-blox San Diego, Inc.

12626 High Bluff Drive, Suite 200 Aug 14, 2013 San Diego, CA 92130 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL To Whom It May Concern: Ref: Application Modular Approval Certification for FCC ID: R5Q-TOBYL100 The following attestation addresses requirements to support licensed modular approval: 1. This device is designed for mobile or fixed operation; portable operation is subject to a Class 2 permissive change application or to a new and separate FCC ID. 2. The maximum antenna gain is limited to 3.0 dBi for the LTE Band 4 and 1.5 dBi for LTE band 13, as calculated in the RF exposure exhibit. 3. The product has a FCC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. The exterior label will read as follows: "Contains Transmitter Module FCC ID: R5Q-TOBYL100" or "Contains FCC ID: R5Q-TOBYL100". 4. We request to include in the grant the following words in the device description or grant notes: "modular transmitter" or "transmitter module". If there are any additional questions or if further information is needed, please contact us. Sincerely, Jake Bascon Certification Engineer u-blox San Diego, Inc.

locate, communicate, accelerate 12626 High Bluff Drive, Suite 200 San Diego, CA 92130 Sept 17, 2013 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL Attn: Director of Certification Re: Request of Confidentiality for FCC ID#: R5Q-TOBYL100 Pursuant to Sections 0.457(d)(I)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests permanent confidential treatment of information accompanying as outlined below:  Schematics  Bill or Materials/Parts List  Operating Description  Block Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. u-blox San Diego, Inc. also hereby requests short-term confidential treatment of the information accompanying this application as outlined below for a period until March 31, 2014.  Internal Photos  External Photos  User Manual  Test Set-Up Photographs The Applicant understands that pursuant to Rule 0.457(d)(I)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Jake Bascon Certification Engineer

FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100

FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100

FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100

TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 August 30, 2013 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL Attention: Director of Certification RE: Prediction of MPE limit at a given distance as per KDB 447498 D01 Mobile Portable RF Exposure v05r01 FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Equation for Power Density: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to isotropic R = distance to the center of radiation of the antenna LTE Band 4 LTE Band 13 Maximum peak output power at antenna input terminal: 23.13 23.39 dBm Maximum peak output power at antenna input terminal: 205.59 218.27 mW Antenna gain (max): 6.57 10.7 dBi Maximum antenna gain: 4.539 11.749 numeric Prediction distance: 20 20 cm Source Based Time Average Duty Cycle: 100 100 % Prediction frequency: 1732.5 782 MHz MPE limit for uncontrolled exposure at prediction frequency: 1.000 0.521 mW/cm 2 Power density at prediction frequency: 0.1857 0.5102 mW/cm 2 Power density at prediction frequency: 1.857 5.102 W/m 2 Margin of Compliance: -7.31 -0.09 dB Sincerely, Ferdie S. Custodio Name Authorized Signatory Title: EMC/Wireless Test Engineer

Report No. SC1307902 August 2013 America Report On Application for Grant of Equipment Authorization of the u-blox San Diego, Inc. TOBY-L100 4G LTE Surface Mount Module FCC CFR 47 Part 2 and 27 IC RSS-Gen and RSS-139 Issue 2 February 2009 FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Report No. SC1307902 Page 2 of 91 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 REPORT ON TEST REPORT NUMBER PREPARED FOR Radio Testing of the u-blox San Diego, Inc. 4G LTE Surface Mount Module SC1307902 u-blox San Diego, Inc. 12626 High Bluff Drive #200 San Diego, CA 92130 CONTACT PERSON Jake Bascon Certification Engineer (858) 847-9611 x216 [email protected] PREPARED BY Ferdinand S. Custodio Name Authorized Signatory Title: EMC/Wireless Test Engineer APPROVED BY Chip R. Fleury Name Authorized Signatory DATED August 13, 2013 FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Report No. SC1307902 Page 3 of 91 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 Revision History SC1307902 u-blox San Diego, Inc. TOBY-L100 4G LTE Surface Mount Module DATE OLD REVISION NEW REVISION REASON PAGES AFFECTED APPROVED BY 08/13/13 Initial Release Ferdinand Custodio FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Report No. SC1307902 Page 4 of 91 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 CONTENTS Section Page No 1 REPORT SUMMARY ............................................................................................................................... 5 1.1 Introduction ................................................................................................................................................ 6 1.2 Brief Summary Of Results ........................................................................................................................... 7 1.3 Product Information ................................................................................................................................... 8 1.4 EUT Test Configuration ............................................................................................................................. 11 1.5 Deviations From The Standard ................................................................................................................. 13 1.6 Modification Record ................................................................................................................................. 13 1.7 Test Methodology ..................................................................................................................................... 13 1.8 Test Facility ............................................................................................................................................... 13 1.9 Sample Calculations .................................................................................................................................. 14 2 TEST DETAILS ...................................................................................................................................... 15 2.1 Transmitter Conducted Power Measurements ........................................................................................ 16 2.2 Equivalent Isotropic Radiated Power ........................................................................................................ 21 2.3 Effective Radiated Power Output Data ..................................................................................................... 26 2.4 Occupied Bandwidth ................................................................................................................................. 28 2.5 Peak-Average Power Ratio........................................................................................................................ 37 2.6 Band Edge ................................................................................................................................................. 44 2.7 Conducted Spurious Emissions ................................................................................................................. 53 2.8 Field Strength Of Spurious Radiation ........................................................................................................ 63 2.9 Frequency Stability ................................................................................................................................... 71 2.10 Receiver Spurious Emissions ..................................................................................................................... 74 2.11 Power Line Conducted Emissions ............................................................................................................. 77 3 TEST EQUIPMENT USED ...................................................................................................................... 81 3.1 Test Equipment Used ................................................................................................................................ 82 3.2 Measurement Uncertainty ....................................................................................................................... 83 4 DIAGRAM OF TEST SETUP ................................................................................................................... 84 4.1 Test Setup Diagram ................................................................................................................................... 85 5 ACCREDITATION, DISCLAIMERS AND COPYRIGHT ............................................................................... 90 5.1 Accreditation, Disclaimers and Copyright ................................................................................................. 91 FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Report No. SC1307902 Page 5 of 91 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 85…

Text truncated - open the document above for the full version.

FCC ID R5Q-TOBYL100 IC: 8595B-TOBYL100 Conducted Port Test Setup Conducted Port Test Setup Conducted Emissions Test Setup Radiated Emissions Test Setup Radiated Emissions Test Setup