RA7-DL-1251ARRemote Control Receiver for Window Blinds

Add: Unit 04, 7/F, Bright Way Tower, NO. 33 Mong Kok Road, Kowloon, HK Tel: 0086-755-36953478, Fax: 0086-755-27338806 http://hkdaylightrf.en.alibaba.com , http://www.daylightrf.com User’s manual of remote control for window blinds 1. Technical parameter of the remote control: 1.1 Working frequency: 433.92Mhz; 1.2 Transmit power: 1.3 Working voltage: 12V23A 1.4 Distance: 15m(free open area); 1.5 Standby current of the sender: 3uA; 2. Technical parameter of the receiver: 2.1 Working frequency: 433.92Mhz; 2.2 Working voltage: 3V DC~7.5VDC; 2.3 Standby current: 380uA; 2.4 Empty current: 45mA 3. Learning method: 3.1 Keep pressing the remote button(any of 1~8) want to learn, at the mean time, press the learn button of the receiver, the led on the receiver will flash one time, means the code has been learnt successfully. Now release the remote button to finish the learning. 2.2 One receiver will learn one button(any of 1~8) only, if learn more than one time, the last learning is the valid one. 2.3 Remote button 1~8 can learn individually with 8 different receivers, they will not affect each other. Remote button 9~12 don’t have learn function. 3. Remove the code: Keep pressing the learn button on the receiver until the LED on it goes from on to extinguish(about 6 seconds), now means the matching code between this receiver and the corresponding remote button has been removed successfully. The code removing is individually, it will not affect the matching of other receiver and corresponding remote button. 4. Operating instruction: Button 1-8 of the remote control is the channel selection, button 9-10 is forward and backward operation, button 11 is power saving button for channel, there is two function on button 12, one is deselect all the channel manually, the other is automatically deselect all the channel if the operator forgot to deselect it after the operations. After the matching, the remote and the receiver will work as following: 4.1. Short press remote buttons(any of 1~8), the LEDs near the button will go on, means the corresponding channels have been selected. But at this moment, the receiver will not work. Press again the selected button, the corresponding LEDs near the button will go off, means the channels have been deselected. 4.2. After the selecte of the channel, press the remote button 9, the top LED for motor working indicator will go on, the selected receivers make the motor go forward. If press remote button 10, the top LED for motor working indicator will go on, the selected receivers make the motor go backward. When release button 9 or 10, the motors stop running, motor working indicating LED goes off. 4.3. After selected the channel, the corresponding LEDs next to the button will go on, but if we press button 11, the selected channel LEDs will go off to enter the status of power saved mode. Press button 11 again, the selected channel LEDs will go on again to remind the operator which channels have been selected already. The power saved mode will not affect the working of the selected channels. Under the status of power saved mode, if we cancel or add some channels, then all the selected Add: Unit 04, 7/F, Bright Way Tower, NO. 33 Mong Kok Road, Kowloon, HK Tel: 0086-755-36953478, Fax: 0086-755-27338806 http://hkdaylightrf.en.alibaba.com , http://www.daylightrf.com LEDs after the cancel or add will go on automatically to remind the operator. Under the status of power saved mode, if we press button 9 or 10 to rotate the motor, the selected LEDs will go on automatically to remind the operator. For example: press button 1, 3, 5, LEDs next to button 1, 3, 5 go on, press button 11, LEDs next to button 1, 3, 5 go off, press again button 1 to deselect channel 1, LEDs next to button 3, 5 go on automatically. Press button 11 to enter the power saving mode of channel LED. Press button 2, 4 to add the channels, LEDs next to button 2, 3, 4, 5 go on. Now press button 11, LEDs next to 2, 3, 4, 5 will go off to inter the power saved mode. Press button 9 or 10, the selected LEDs near 2, 3, 4, 5 go on automatically, top LED will go on too. After the motor finish the working, press button 11, all the LEDs go off. 4.4. Keep pressing button 12 for 3 seconds, the top LED indicator will flash quickly, at the same time, all the selected channels will be cancelled, all the selected channel LEDs will go off. 4.5 When button 1-8 is selected, if the operator forgot to press button 11, or cancel the selected channel, to prevent the waste of the power, button 12 will automatically send 1s of signal to turn off all the selected LED and cancel all the selected channel at 30 seconds after the last operation. 5. Special protection function: 5.1. Limit function: Wiring diagram of the limit switch: When the motor go forward till it touch the limit switch, the motor will stop automatically. Now the limit switch has been pressed, if there is any forward instruction, the motor will not work, it will work only when there is backward instruction. The limit to the backward is the same as forward. 5.2. Avoid false operation: All the buttons except button 9 & 10, if they are pressed for more than 5 seconds, they will not transmit any signal. The button 12 will send signal only after pressing for 3 seconds, to avoid the cancel because of false pressing. 6. Attention: 6.1. There is a definite time for the receiver to do the reaction to the remote, so pls don’t operate the button too quickly, especially button 1-8, it is better if you can press it for each selection for 1 second. 6.2. Turn off the power supply to the receiver if idle for long time, and pull out the battery of the remote. 6.3. Pls change the battery when the distance become short or the LED on the receiver becomes dark. 6.4 Keep the receiver away from the metal parts, so you can get better receiving. FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful…

Text truncated - open the document above for the full version.

Gholamali Malekpour FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company nameGholamali Malekpour Address10531 4s Commons #166-411 CitySan Diego, California 92127 CountryUnited States declare that the following representative (agent): Name (person)Tony Wu Company nameBontek Compliance Laboratory Co., Ltd. Address1/F, Block East H-3,OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, CityShenzhen,Guangdong CountryChina is hereby authorized to apply the following equipment for certification on our behalf: Product DescriptionRemote Control for Window Blinds Type or Model(s)DL-CS2017L,DL-CS2017A, DL-CS2017B Tradename or Brand(s)N/A We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) SHEN ZHEN, CHINA2012-11-28Gholamali MalekpourCEO

Gholamali Malekpour FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Gholamali Malek pour Address 10531 4s Commons #166-411 City San Die go Country USA request for this certification filing under: Grantee Code Product Number FCC ID:RA7-DL-1251AR RA7 DL-CS2017L,DL-CS2017A, DL-CS2017B to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description Operational Description RA7- DL-1251AR_Functional description of each block diagramRX.pdf explaining the functioning of the block diagram Block Diagrams RA7- DL-1251AR_block diagram of DL- CS2017 serial receiver.pdf.pdf showing the systematic building blocks of the EUT Schematics Diagrams RA7- DL-1251AR_Schematic DiagramRX.pdf showing components, their values and interconnection Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) SHEN ZHEN 2012-12-20 Gholamali Malekpour CEO San Diego, USA 2012-12-20

External Photographs EUT –Front View（receiver DL-CS2017L） EUT –Side View EUT –Front View（receiver DL-CS2017L） EUT – Side View EUT – Front View（receiver DL-CS2017B） EUT – Rear View

FCC ID Location DL-CS2017L, DL-CS2017A FCC ID Location FCC ID Location DL-CS2017B FCC ID Location

FCC ID Label Sample for FCC ID: RA7-DL-1251AR Gholamali Malekpour Model: DL-CS2017L, DL-CS2017A, DL-CS2017B FCC ID: RA7-DL-1251AR

Internal Photographs EUT - Open View （receiver DL-CS2017L） EUT - PCB View EUT - Open View （receiver DL-CS2017A） EUT - PCB View EUT - PCB View （receiver DL-CS2017B） Moto

FCC PART 15 SUBPART B MEASUREMENT AND TEST REPORT For Gholamali Malekpour Product description: Remote Control for Window Blinds Model No.: DL-CS2017L,DL-CS2017A, DL-CS2017B Supplementary Model: DL-CS2017L,DL-CS2017A, DL-CS2017B FCC ID: RA7- DL-1251AR Prepared for: Gholamali Malekpour 10531 4s Commons #166-411, San Diego, California 92127 Prepared by: Bontek Compliance Laboratory Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Tel: 86-755-86337020 Fax: 86-755-86337028 Report No.: BCT12KR-2043E-1 Issue Date: November 28, 2012 Test Date: November 7~28, 2012 Test by: Reviewed By: Lion Cai Kevin Chi Report No.: BCT12KR-2043E-1 Page 2 of 17 FCC ID RA7- DL-1251AR: TABLE OF CONTENTS 1 - GENERAL INFORMATION ....................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................ 3 1.2 TEST STANDARDS....................................................................................................................................................... 3 1.3 TEST SUMMARY.......................................................................................................................................................... 4 1.4 TEST METHODOLOGY.................................................................................................................................................. 4 1.5 TEST FACILITY............................................................................................................................................................ 5 1.6 TEST EQUIPMENT LIST AND DETAILS............................................................................................................................. 6 2 - SYSTEM TEST CONFIGURATION ........................................................................................................... 8 2.1 JUSTIFICATION............................................................................................................................................................ 8 2.2 EUT EXERCISE SOFTWARE......................................................................................................................................... 8 2.3 SPECIAL ACCESSORIES............................................................................................................................................... 8 2.4 EQUIPMENT MODIFICATIONS........................................................................................................................................ 8 2.5 CONFIGURATION OF TEST SYSTEM...............................................................................................................................8 2.6 TEST SETUP DIAGRAM................................................................................................................................................ 8 3 - DISTURBANCE VOLTAGE AT THE MAINS TERMINALS ...................................................................... 9 3.1 MEASUREMENT UNCERTAINTY...................................................................................................................................... 9 3.2 LIMIT OF DISTURBANCE VOLTAGE AT THE MAINS TERMINALS........................................................................................... 9 3.3 TEST DESCRIPTION..................................................................................................................................................... 9 4 - RADIATED DISTURBANCES ................................................................................................................. 10 4.1 MEASUREMENT UNCERTAINTY.................................................................................................................................... 10 4.2 LIMIT OF RADIATED DISTURBANCES............................................................................................................................ 10 4.3 EUT SETUP............................................................................................................................................................. 10 4.4 TEST RECEIVER SETUP............................................................................................................................................. 11 4.5 TEST PROCEDURE.................................................................................................................................................... 11 4.6 CORRECTED AMPLITUDE & MARGIN CALCULATION....................................................................................................... 11 4.7 RADIATED EMISSIONS TEST RESULT........................................................................................................................... 11 4.8 TEST RESULT........................................................................................................................................................... 11 Report No.: BCT12KR-2043E-1 Page 3 of 17 FCC ID RA7- DL-1251AR: 1 - GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: Gholamali Malekpour Address of applicant: 10531 4s Commons #166-411, San Diego, California 92127 Manufacturer: Gholamali Malekpour Address of manufacturer: 10531 4s Commons #166-411, San Diego, California 92127 General Description of E.U.T EUT Description: Remote Control for Window Blinds Model No.: DL-CS2017L,DL-CS2017A, DL-CS2017B Supplementary Model: DL-CS2017L,DL-CS2017A, DL-CS2017B Trade Mark: N/A Rated Voltage: DC 6V from 1.2 Test Standards The following Declaration of Conformity report of EUT is prepared in accordance with FCC Rules and Regulations Part 15 Subpart B 2006 The objective of the manufacturer is to demonstrate compliance with the described above standards. Report No.: BCT12KR-2043E-1 Page 4 of 17 FCC ID RA7…

Text truncated - open the document above for the full version.

Radiated emission （transmitter DL-CS2017L） Radiated emission （transmitter DL- CS2017A） Radiated emission （transmitter DL- CS2017B）