RAD552GSM Quadband / UMTS Triband mobile phone

1 English US - CJB331AALAAD Quick Start Guide For more information about how to use the phone, please go to www.alcatelonetouch.com to download complete user manual. Also on our website you can find helpful FAQs, software upgrade, etc. A392T 23 1 Your mobile ������������ 1�1 Keys and connectors Left key Right key Navigation key/ OK key End key Delete key Send key Volume key micro-USB connector Headset connector Camera key PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the RADIOWAVES section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements.Note that the product may be transmitting even if you are not making a phone call. www.sar-tick.com Table of contents 1 Your mobile ���������������������������������������������������������������������3 2 Getting started ���������������������������������������������������������������9 3 Making a call ������������������������������������������������������������������10 4 Messaging�����������������������������������������������������������������������11 5 Contacts ������������������������������������������������������������������������13 6 Call log ���������������������������������������������������������������������������14 7 Media ������������������������������������������������������������������������������14 8 Files ��������������������������������������������������������������������������������16 9 Browser ��������������������������������������������������������������������������17 10 Applications �������������������������������������������������������������������18 11 Tools �������������������������������������������������������������������������������19 12 Settings ��������������������������������������������������������������������������21 13 Making the most of your mobile �������������������������������21 Troubleshooting����������������������������������������������������������������������22 Safety and use �������������������������������������������������������������������������27 General information ��������������������������������������������������������������37 LIMITED WARRANTY ����������������������������������������������������������38 45 • Press: "0" Key Press and hold: Switch between "+/P/W" • In Edit mode Press: Enter a space Press and hold: Input "0" • Press: Take a picture • Press and hold: Access Camera • Press: Volume up/down • In Camera mode Press: Zoom in/out • In music playing mode Press and hold: Previous/Next song • In Radio mode Press and hold: Previous/Next channel • In Calendar mode Press: Previous/Next month • Incoming call (Clamshell close) Press: Mute Press and hold: End • Alarm beep (Clamshell close) Press: Snooze Press and hold: Stop • Navigation key (1) Press to go left/right/up/ down Press to access function UP: Call log DOWN: Contacts LEFT (2) : Tools RIGHT (2) : Media • OK key Press to confirm an option • Answer/Send a call • Enter Call log • Press: End a call Return to the Home screen • Press and hold: Power on/off • Press: Delete characters in Edit mode • Press: "#" key Press and hold: Switch to General profile • In Edit mode Press: Switch between ABC/Abc/abc Press and hold: Switch between Multi-Tap/ Smart • Press: "1" Key Press and hold: Access your voicemail • In Edit mode Press: Input "1" Input frequently-used symbols • Press: " " Key • In Edit mode Press: change input method Press and hold: Access the Symbols table * (1) You can personalize navigation key in Settings. (2) The shortcut to access function for LEFT/RIGHT only be available when shortcut bar is off. 67 Email unread� WAP messages. Roaming. microSD card scanning completed. GPRS connecting. GPRS attached� EDGE connecting� EDGE attached� 3G network connecting� 3G network attached� Music active. MMS receipt in progress� Silence mode: your phone does not ring, beep or vibrate with the exception of the alarm. 1�2 Status bar icons (1) Battery charge level Vibrate alert: your phone vibrates, but does not ring or beep with the exception of the alarm. Bluetooth ® status (Activated). Bluetooth ® status (Connected to an audio device). Java status (Activated). Headset connected. Call forwarding activated: your calls are forwarded. Alarm or appointments programmed. Level of network reception. Voicemail message arrived. Missed calls. Call in progress� Stopwatch is active. Radio is on. (1) The icons and illustrations in this guide are provided for informational purposes only. 89 2 Getting started ������� 2�1 Set-up Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Please power off your phone and remove battery before inserting or removing the SIM card. Place the SIM card with the chip facing downwards and slide it into its housing. Ensure the beveled edge of the SIM card is aligned with the SIM card slot. To remove the card, press and slide it out. Installing or removing the battery Insert and click the battery into place, then close the telephone cover. Unclip the cover, then remove the battery. Message unread. (Red) Message list is full: your phone cannot accept any new messages. You must access the message list and delete at least one message on your SIM card. Airplane mode� 1�3 Home screen 1�3�1 Shortcut bar Shortcuts are home screen icons for your frequently used items, like Calls or Messages. You can customize shortcut bar by selecting «Settings\ Phone settings\Shortcut bar». 1011 4 Messaging ����������� 4�1 Access You may access this menu using the following options: • Access from the main menu by selecting «Messaging». • Select from shortc…

Text truncated - open the document above for the full version.

5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 Date 2015-01-19 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCT Mobile Limited

5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 TEL: +86(0)21 61460666 FAX: +86(0)21 61460602 2015-06-12 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: RAD552 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCT Mobile Limited

EUT photograph Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile phone Charger AE1 Label of Charger AE1 USB Cable AE2 Headset AE3 Headset AE4 Battery AE5 Battery AE5-1

Label Placement

EUT Interior photograph Mobile Phone Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. I15Z41184-SEM01 For TCT Mobile Limited GSM Quadband / UMTS Triband mobile phone Model Name: ALCATEL A392T With Hardware Version: 02 Software Version: CA7 FCC ID: RAD552 Issued Date: 2015-06-11 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 Te l:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email: [email protected], website:www.chinattl.com TESTING CNAS L0570 No.I15Z41184-SEM01 Page 2 of 116 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Issue Date Description I15Z41184-SEM01 Rev.0 2015-06-11 Initial creation of test report No.I15Z41184-SEM01 Page 3 of 116 ©Copyright. All rights reserved by CTTL. TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................. 5 1.1 TESTING LOCATION ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE ................................................................................................ 6 3 CLIENT INFORMATION.............................................................................................................. 8 3.1 APPLICANT INFORMATION .............................................................................................................................. 8 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 8 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 9 4.1 ABOUT EUT ................................................................................................................................................... 9 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 9 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................. 9 5 TEST METHODOLOGY ............................................................................................................ 10 5.1 APPLICABLE LIMIT REGULATIONS ................................................................................................................ 10 5.2 APPLICABLE MEASUREMENT STANDARDS .................................................................................................... 10 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 11 6.1 INTRODUCTION ............................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................... 11 7 TISSUE SIMULATING LIQUIDS ............................................................................................... 12 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 12 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 12 8 SYSTEM VERIFICATION .......................................................................................................... 16 8.1 SYSTEM SETUP ............................................................................................................................................. 16 8.2 SYSTEM VERIFICATION ................................................................................................................................. 17 9 MEASUREMENT PROCEDURES ............................................................................................ 18 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 18 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 19 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 20 9.4 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 21 9.5 POWER DRIFT ............................................................................................................................................... 22 10 AREA SCAN BASED 1-G SAR .............................................................................................. 22 10.1 REQUIREMENT OF KDB .............................................................................................................................. 22 10.2 FAST SAR ALGORITHMS ............................................................................................................................ 22 11 CONDUCTED OUTPUT POWER ...........................................…

Text truncated - open the document above for the full version.

No.I15Z41184-SEM01 Page 59 of 116 ©Copyright. All rights reserved by CTTL. WCDMA 1900 Left Cheek Low Date: 2015-5- 23 Electronics: DAE4 Sn777 Medium: Head 1900 MHz Medium parameters used: f = 1852.4 MHz; σ = 1.374 S/m; ε r = 40.823; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: WCDMA 1900 Frequency: 1852.4 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.26, 7.26, 7.26) Area Scan (61x141x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.737 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.466 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.896 W/kg SAR(1 g) = 0.550 W/kg; SAR(10 g) = 0.300 W/kg Maximum value of SAR (measured) = 0.752 W/kg Fig.9 WCDMA1900 No.I15Z41184-SEM01 Page 60 of 116 ©Copyright. All rights reserved by CTTL. Fig. 9-1 Z-Scan at power reference point (WCDMA1900) No.I15Z41184-SEM01 Page 61 of 116 ©Copyright. All rights reserved by CTTL. WCDMA 1900 Body Rear Open High Date: 2015-5- 23 Electronics: DAE4 Sn777 Medium: Body 1900 MHz Medium parameters used: f = 1907.6 MHz; σ = 1.546 S/m; ε r = 53.241; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: WCDMA 1900 Frequency: 1907.6 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.15, 7.15, 7.15) Area Scan (151x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.20 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.88 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.43 W/kg SAR(1 g) = 0.944 W/kg; SAR(10 g) = 0.594 W/kg Maximum value of SAR (measured) = 1.17 W/kg Fig.10 WCDMA1900 No.I15Z41184-SEM01 Page 62 of 116 ©Copyright. All rights reserved by CTTL. Fig. 10-1 Z-Scan at power reference point (WCDMA1900) No.I15Z41184-SEM01 Page 63 of 116 ©Copyright. All rights reserved by CTTL. ANNEX B SystemVerification Results 835MHz Date: 2015-5- 22 Electronics: DAE4 Sn777 Medium: Head 850 MHz Medium parameters used: f = 835 MHz; σ = 0.913 S/m; ε r = 41.4; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(9.18, 9.18, 9.18) System Validation/Area Scan (61x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 54.954 V/m; Power Drift = -0.08 dB Fast SAR: SAR(1 g) = 2.47 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (interpolated) = 2.69 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.954 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 3.12 W/kg SAR(1 g) = 2.43 W/kg; SAR(10 g) = 1.57 W/kg Maximum value of SAR (measured) = 2.65 W/kg 0 dB = 2.65 W/kg = 4.22 dBW/kg Fig.B.1 validation 835MHz 250mW No.I15Z41184-SEM01 Page 64 of 116 ©Copyright. All rights reserved by CTTL. 835MHz Date: 2015-5- 22 Electronics: DAE4 Sn777 Medium: Body 850 MHz Medium parameters used: f = 835 MHz; σ = 0.979 S/m; ε r = 54.5; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(9.09, 9.09, 9.09) System Validation /Area Scan (61x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 52.094 V/m; Power Drift = 0.07 dB Fast SAR: SAR(1 g) = 2.31 W/kg; SAR(10 g) = 1.54 W/kg Maximum value of SAR (interpolated) = 2.56 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 52.094 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 3.05 W/kg SAR(1 g) = 2.34 W/kg; SAR(10 g) = 1.56 W/kg Maximum value of SAR (measured) = 2.57 W/kg 0 dB = 2.57 W/kg = 4.10 dBW/kg Fig.B.2 validation 835MHz 250mW No.I15Z41184-SEM01 Page 65 of 116 ©Copyright. All rights reserved by CTTL. 1750MHz Date: 2015-5- 19 Electronics: DAE4 Sn777 Medium: Head 1750 MHz Medium parameters used: f=1750 MHz; σ = 1.403 mho/m; εr = 39.67; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22.2 o C Communication System: CW Frequency: 1750 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.64, 7.64, 7.64) System Validation/Area Scan (81x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 89.209 V/m; Power Drift = 0.04 dB Fast SAR: SAR(1 g) = 9.11 W/kg; SAR(10 g) = 4.85 W/kg Maximum value of SAR (interpolated) = 10.1 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 89.209 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 15.62 W/kg SAR(1 g) = 9.09 W/kg; SAR(10 g) = 4.84 W/kg Maximum value of SAR (measured) = 10.1 W/kg 0 dB = 10.1 W/kg = 10.04 dB W/kg Fig.B.3 validation 1750MHz 250mW No.I15Z41184-SEM01 Page 66 of 116 ©Copyright. All rights reserved by CTTL. 1750MHz Date: 2015-5- 19 Electronics: DAE4 Sn777 Medium: Body 1750 MHz Medium parameters used: f=1750 MHz; σ = 1.471 mho/m; εr = 52.88; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temperature: 22. 2 o C Communication System: CW Frequency: 1750 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.43, 7.43, 7.43) System Validation/Area Scan (81x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 96.62 V/m; Power Drift = -0.03 dB Fast SAR: SAR(1 g) = 9.62 W/kg; SAR(10 g) = 5.19 W/kg Maximum value of SAR (interpolated) = 10.8 W/kg System Validation/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.62 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 16.5 W/kg SAR(1 g) = 9.46 W/kg; SAR(10 g) = 5.08 W/kg Maximum value of SAR (measured) = 10.6 W/kg 0 dB = 10.6 W/kg = 10.25 dB W/kg Fig.B.4 validation 1750MHz 250mW No.I15Z41184-SEM01 Page 67 of 116 ©Copyright. All rights reserved by CTTL. 1900MHz Date: 2015-5- 23 Electronics: DAE4 Sn777 Medium: Head 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.417 mho/m; ε r = 40.66; ρ = 1000 kg/m 3 Ambient Temperature: 22.7 o C Liquid Temp…

Text truncated - open the document above for the full version.

No. I15Z41184-GTE01 Page1 of 72 TEST REPORT No. I15Z41184-GTE01 for TCT Mobile Limited GSM Quadband / UMTS Triband mobile phone Model Name: ALCATEL A392T FCC ID: RAD552 with Hardware Version: 02 Software Version: CA7 Issued Date: 2015-06-10 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No.525429 CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel: +86(0)10-62304633-2512, Fax: +86(0)10-62304633-2504 Email: [email protected] , website: www.chinattl.com No. I15Z41184-GTE01 Page2 of 72 REPORT HISTORY Report Number Revision Description Issue Date I15Z41184-GTE01 Rev.0 1st edition 2015-06-10 No. I15Z41184-GTE01 Page3 of 72 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 4 1.1. TESTING LOCATION .................................................................................................................... 4 1.2. TESTING ENVIRONMENT ........................................................................................................... 4 1.3. PROJECT DATA .............................................................................................................................. 4 1.4. SIGNATURE ..................................................................................................................................... 4 2. CLIENT INFORMATION ................................................................................................................... 5 2.1. APPLICANT INFORMATION ....................................................................................................... 5 2.2. MANUFACTURER INFORMATION ............................................................................................ 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT ..................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 6 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER ............................................................................................................................ 11 A.2 EMISSION LIMIT ........................................................................................................................... 17 A.3 FREQUENCY STABILITY ............................................................................................................ 23 A.4 OCCUPIED BANDWIDTH ............................................................................................................ 25 A.5 EMISSION BANDWIDTH ............................................................................................................. 38 A.6 BAND EDGE COMPLIANCE ........................................................................................................ 50 A.7 CONDUCTED SPURIOUS EMISSION ......................................................................................... 57 No. I15Z41184-GTE01 Page4 of 72 1. Test Laboratory 1.1. Testing Location Company Name: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2015-05-26 Testing End Date: 2015-06-02 1.4. Signature Shen Yi (Prepared this test report) Zhong Nan (Reviewed this test report) Sun Xiang Qian Deputy Director of the laboratory (Approved this test report) No. I15Z41184-GTE01 Page5 of 72 2. Client Information 2.1. Applicant Information Company Name: TCT Mobile Limited Address /Post: 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 Contact Person: Gong Zhizhou Contact Email [email protected] Telephone: 0086-21-51798260 Fax: 0086-21-51798260 2.2. Manufacturer Information Company Name: TCT Mobile Limited Address /Post: 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 Contact Person: Gong Zhizhou Contact Email [email protected] Telephone: 0086-21-51798260 Fax: 0086-21-51798260 No. I15Z41184-GTE01 Page6 of 72 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description GSM Quadband / UMTS Triband mobile phone Model Name ALCATEL A392T FCC ID RAD552 Antenna Integrated Output power 32.95dBm maximum EIRP measured for PCS1900 Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.8VDC) Extreme temp. Tolerance -30°C to +50°C Note: Components list, please refer to documents o…

Text truncated - open the document above for the full version.

TEST REPORT No. I15Z41184-GTE03 for TCT Mobile Limited GSM Quadband / UMTS Triband mobile phone Model Name: ALCATEL A392T FCC ID:RAD552 with Hardware Version:02 Software Version: CA7 Issued Date: 2015-06-04 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No.525429 CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel: +86(0)10-62304633-2512, Fax: +86(0)10-62304633-2504 Email: [email protected] , website: www.chinattl.com No.I14Z41184-GTE03 Page 2of 69 REPORT HISTORY Report Number Revision Description Issue Date I15Z41184-GTE03 Rev.0 1st edition 2015-06-04 No.I14Z41184-GTE03 Page 3of 69 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 4 1.1. TESTING LOCATION .................................................................................................................... 4 1.2. TESTING ENVIRONMENT ........................................................................................................... 4 1.3. PROJECT DATA .............................................................................................................................. 4 1.4. SIGNATURE ..................................................................................................................................... 4 2. CLIENT INFORMATION ................................................................................................................... 5 2.1. APPLICANT INFORMATION ....................................................................................................... 5 2.2. MANUFACTURER INFORMATION ............................................................................................ 5 3. EQUIPMENT UNDERTEST (EUT) AND ANCILLARY EQUIPMENT (AE) .............................. 6 3.1. ABOUT EUT ..................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 6 3.4. NORMAL ACCESSORY SETTING ............................................................................................... 7 3.5. GENERAL DESCRIPTION ............................................................................................................ 7 4. REFERENCE DOCUMENTS ............................................................................................................. 8 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 8 5. LABORATORY ENVIRONMENT ..................................................................................................... 9 6. SUMMARY OF TEST RESULTS ..................................................................................................... 10 7. TESTEQUIPMENTS UTILIZED ..................................................................................................... 12 ANNEX A: MEASUREMENT RESULTS ................................................................................................ 13 A.1 OUTPUT POWER .............................................................................................…

Text truncated - open the document above for the full version.