RAS-MT76632TX 11ac + BLE Combo Card

© 2016 - 2019 MediaTek Inc. This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. Specifications are subject to change without notice. M e d i a T e k C o n f i d e n t i a l A Version: V1.1 Release Date: 2019-04-12 MT7663 Test-Mode Software Application Note Part-1: QA-Tool User Guideline MT7663 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2016 - 2019 MediaTek Inc. Page 2 of 29 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. C o n f i d e n t i a l A Document Revision History Version Date Author Change List V1.0 20190308 Louis  Initial release. V1.1 20190412 Shihmis  2.3.6-2.3.8 Wording changed. Me dia Tek Co nfid enti al A MT7663 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2016 - 2019 MediaTek Inc. Page 3 of 29 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. C o n f i d e n t i a l A Table of Contents Document Revision History .................................................................................................................. 2 Table of Contents ................................................................................................................................... 3 1 System overview .......................................................................................................................... 5 1.1 General Description .............................................................................................................. 5 2 QA-Tool ......................................................................................................................................... 6 2.1 How to install QA-tool ........................................................................................................... 6 2.1.1 Install WinPcap ..................................................................................................... 7 2.1.2 Windows 7 Security for new x64 signature mechanism ....................................... 8 2.1.3 Windows 10 install note ....................................................................................... 9 2.1.4 QA-Tool Windows driver .................................................................................... 10 2.1.5 Non MTK PID/VID driver install .......................................................................... 16 2.2 How to use QA-tool ............................................................................................................ 18 2.2.1 Launch QA-Tool ................................................................................................. 18 2.2.2 Start QA-Tool in BIN-file Mode ........................................................................... 19 2.2.3 Start QA-Tool in E-fuse Mode ............................................................................ 19 2.3 How to Use the QA-Tool ..................................................................................................... 20 2.3.1 WIFI Packets Transmitting –TX0 ....................................................................... 20 2.3.2 WIFI Packets Transmitting –TX1 ....................................................................... 21 2.3.3 WIFI Packets Transmitting –2TX ....................................................................... 22 2.3.4 WIFI Continuous Packet Transmitting ................................................................ 23 2.3.5 WIFI Single Tone Transmitting ........................................................................... 24 2.3.6 WIFI Packets Receiving –RX0 ........................................................................... 25 2.3.7 WIFI Packets Receiving –RX1 ........................................................................... 26 2.3.8 WIFI Packets Receiving –2RX ........................................................................... 27 MT7663 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2016 - 2019 MediaTek Inc. Page 4 of 29 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. C o n f i d e n t i a l A 2.4 Read, Write E-fuse Table ................................................................................................... 28 2.4.1 Read a Value from E-fuse .................................................................................. 28 2.4.2 Write a Value to E-fuse ...................................................................................... 29 MT7663 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2016 - 2019 MediaTek Inc. Page 5 of 29 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. C o n f i d e n t i a l A 1 System overview 1.1 General Description MT7663 chip is highly integrated single chip which have built in 2x2 dual-band wireless LAN and Bluetooth combo radio. It can be configured in test-mode for performance validation, production testing and regulatory certification. There are two software tools, QA-Tool and Combo-Tool responsible for evaluating WIFI and Bluetooth signal and performance testing. This document is introducing how to install and use QA-Tool. MT7663 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2016 - 2019 MediaTek Inc. Page 6 of 29 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. C o n f i d e n t i a l A 2 QA-Tool Users have to install 3 major software before using QA-Tool…

Text truncated - open the document above for the full version.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.6 RF exposure considerations This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules. 2.7 Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. 2.8 Label and compliance information The final end product must be labeled in a visible area with the following: “Contains FCC ID: RAS-MT7663”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 2.9 Information on test modes and additional testing requirements This transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, an…

Text truncated - open the document above for the full version.

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan DFS client device channel plan and software operational declaration Date: 2020-01-09 We, MediaTek Inc., declare that the device, FCC ID: RAS-MT7663 Model Name: MT7663, does not have Ad Hoc on “non-US frequencies” and/or on“ DFS frequencies“. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad- hoc peer-to-peer modes. Below is the channel / frequency plan for the device Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad-hoc mode on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. Sincerely yours, Sincerely yours, CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 38 40 42 44 46 48 Frequency (MHz) 5180 5190 5200 5210 5220 5230 5240 Scan Type Active Active Active Active Active Active Active CH 52 54 56 58 60 62 64 Frequency (MHz) 5260 5270 5280 5290 5300 5310 5320 Scan Type Passive Passive Passive Passive Passive Passive Passive CH 100 102 104 106 108 110 112 116 118 120 122 Frequency (MHz) 5500 5510 5520 5530 5540 5550 5560 5580 5590 5600 5610 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 124 126 128 132 134 136 138 140 142 144 Frequency (MHz) 5620 5630 5640 5660 5670 5680 5690 5700 5710 5720 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 149 151 153 155 157 159 161 165 Frequency (MHz) 5745 5755 5765 5775 5785 5795 5805 5825 Scan Type Active Active Active Active Active Active Active Active MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan ----------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

FCC ID: RAS-MT7663 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch December 31, 2019 Dear Application Examiner, MediaTek Inc., 2TX 11ac + BLE Combo Card, FCC ID: RAS-MT7663 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB996369 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip MT7663BE. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is MT7663BE. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a test tool. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Andrea Hsia / Supervisor Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 Fax: 886-3-327 0892 Email: [email protected]

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan Date: 2020-01-09 FCC ID: RAS-MT7663 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan Date: 2020-01-09 FCC ID: RAS-MT7663 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan Date: 2020-01-09 FCC ID: RAS-MT7663 AUTHORIZATION LETTER To Whom It May Concern: MediaTek Inc. hereby authorizes Andrea Hsia/ Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/ Supervisor of BV CPS Taoyuan on MediaTek Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan Date: 2020-01-09 A UTHORIZ A TION LETTER To whom it may concern: I, the undersigned Siegfried Chang of MediaTek Inc., Inc. hereby authorize Stella Chang of MediaTek Inc. to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by Stella Chang on my behalf shall have the same effects as acts of our own. This agreement is valid until permanent. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Siegfried Chang/ Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

Date: January 9, 2020 SUBJECT: Supersede for FCC ID: RAS-MT7663, Granted Date: 01/06/2019 To Whom It May Concern: We, MediaTek Inc., would like to supersede the following submitted documents, since the exhibits have a typo on company name. "Media Tek" in original submitted exhibits should be corrected to one word "MediaTek". The superseded documents are listed as below: Original File name Newly File name Test Report (BT EDR) rev Test Report (BT EDR) rev2 Test Report (DFS) rev Test Report (DFS) rev2 Test Report (DTS-BT LE) rev Test Report (DTS-BT LE) rev2 Test Report (DTS-WLAN) rev Test Report (DTS-WLAN) rev2 Test Report (NII) rev Test Report (NII) rev2 Test Report (Transmit Simultaneously) rev Test Report (Transmit Simultaneously) rev2 RF Exposure Info (MPE) RF Exposure Info (MPE) rev3 Attestation (Channel and Mode Declaration) Attestation (Channel and Mode Declaration) rev Attestation (DFS Client Declaration) rev Attestation (DFS Client Declaration) rev2 Confidentiality Request (Long term) Confidentiality Request (Long term) rev Cover Letter (Agent Authorization) Cover Letter (Agent Authorization) rev Cover Letter (Contact Authorization) rev Cover Letter (Contact Authorization) rev2 Label Sample & Label Location Label Sample & Label Location rev Software Operating Description rev2 Software Operating Description rev3 Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, ----------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

Reference No.: 190628E01-2 Page No. 1 / 15 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Interface: PCIe Reference No.: 190628E01-2 Page No. 2 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 3 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 4 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 5 / 15 Reference No.: xxxxxxxx Interface: SDIO Reference No.: 190628E01-2 Page No. 6 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 7 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 8 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 9 / 15 Reference No.: xxxxxxxx Antenna Set 1 Reference No.: 190628E01-2 Page No. 10 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 11 / 15 Reference No.: xxxxxxxx Antenna Set 2 Reference No.: 190628E01-2 Page No. 12 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 13 / 15 Reference No.: xxxxxxxx Reference No.: 190628E01-2 Page No. 14 / 15 Reference No.: xxxxxxxx Antenna Set 3 Reference No.: 190628E01-2 Page No. 15 / 15 Reference No.: xxxxxxxx

Label Location EuT Front side MediaTek Inc. Made in Taiwan Model: MT7663 FCC ID: RAS-MT7663, IC: 7542A-MT7663

Reference No.: 190628E01-4 Page No. 1 / 4 Reference No.: xxxxxxxx CONSTRUCTION PHOTOS OF EUT Interface: PCIe Reference No.: 190628E01-4 Page No. 2 / 4 Reference No.: xxxxxxxx Reference No.: 190628E01-4 Page No. 3 / 4 Reference No.: xxxxxxxx Interface: SDIO Reference No.: 190628E01-4 Page No. 4 / 4 Reference No.: xxxxxxxx

Report No.: SA190628E01 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA190628E01 FCC ID: RAS-MT7663 Test Model: MT7663 Received Date: June 28, 2019 Test Date: Sep. 09, 2019 Issued Date: Dec. 31, 2019 Applicant: MediaTek Inc. Address: No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan (R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwa. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA190628E01 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 7 Report No.: SA190628E01 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA190628E01 Original release. Dec. 31, 2019 Report No.: SA190628E01 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: 2TX 11ac + BLE Combo Card Brand: MTK Test Model: MT7663 Sample Status: ENGINEERING SAMPLE Applicant: MediaTek Inc. Test Date: Sep. 09, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3-2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 31, 2019 Joyce Kuo / Specialist Approved by : , Date: Dec. 31, 2019 Clark Lin / Technical Manager Report No.: SA190628E01 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190628E01 Page No. 6 / 7 Report Format Version: 6.1.1 2.4 Antenna Gain Antenna Set RF Chain No. Brand Model Ant. Net Gain (dBi) Frequency range (GHz) Antenna Type Connector Type Cable Length 1 Chain 0 LYNwave ALA110-222050-300011 3.5 2.4~2.4835 PIFA i-pex(MHF) 55mm 5 5.15~5.85 Chain 1 LYNwave ALA110-222050-300011 3.5 2.4~2.4835 PIFA i-pex(MHF) 55mm 5 5.15~5.85 2 Chain 0 Cortec AN2450-4902BRS 2.42 2.4~2.4835 Dipole R-SMA 150mm 3.87 5.15~5.85 Chain 1 Cortec AN2450-4902BRS 2.42 2.4~2.4835 Dipole R-SMA 150mm 3.87 5.15~5.85 3 Chain 0 PSA RFMTA340718EMLB301 2.92 2.4~2.4835 PIFA i-pex(MHF) 199.4mm 4.94 5.15~5.85 Chain 1 PSA RFMTA340718EMLB301 2.92 2.4~2.4835 PIFA i…

Text truncated - open the document above for the full version.

Report No.: RF190628E01-5 Page No. 1 / 23 Report Format Version: 6.1.2 DFS Test Report Report No.: RF190628E01-5 FCC ID: RAS-MT7663 Test Model: MT7663 Received Date: June 28, …

Text truncated - open the document above for the full version.