RAS-MT79212TX 11ax (WiFi6) + BLE Combo Card

© 2020 MediaTek Inc. This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. Specifications are subject to change without notice. Version: V0.3 Release Date: 2020-07-24 Model: MT7921 2TX 11ax (WiFi6) + BLE Combo Card Test-Mode Software Application Note Part-1: QA-Tool User Guideline MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 2 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. Document Revision History Version Date Author Change List V0.1 20200217 Jane Initial draft release. V0.2 20200227 Jian-Lun 2 nd draft release. Added 2.3.9~2.3.17 V0.3 20200724 TW Add section 2.5 for dual-band dual concurrent (DBDC) operation MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 3 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. Table of Contents Document Revision History ................................................................................................................. 2 Table of Contents .................................................................................................................................. 3 1 System overview ......................................................................................................................... 4 1.1 General Description ............................................................................................................. 4 2 QA-Tool ........................................................................................................................................ 5 2.1 How to install QA-tool .......................................................................................................... 5 2.1.1 Install WinPcap .................................................................................................... 6 2.1.2 Windows 7 Security for new x64 signature mechanism ...................................... 7 2.1.3 Windows 10 install note ...................................................................................... 8 2.1.4 QA-Tool Windows driver ..................................................................................... 9 MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 4 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. 1 System overview 1.1 General Description MT7921 chip is highly integrated single chip which have built in 2x2 dual-band wireless LAN and Bluetooth combo radio. It can be configured in test-mode for performance validation, production testing and regulatory certification. There are two software tools, QA-Tool and Combo-Tool responsible for evaluating WIFI and Bluetooth signal and performance testing. This document is introducing how to install and use QA-Tool. MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 5 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. 2 QA-Tool Users have to install 3 major software before using QA-Tool.  WinPcap  Windows7 X64 security package  QA-Tool Windows driver MTK strongly recommends install QA-Tool on Windows 7-64bit operating system. 2.1 How to install QA-tool Please follow the procedure listed in below to install QA-Tool  1 st : Install WinPcap  2 nd : Update Windows7 security package to register x64 signature mechanism  3 rd : Instal QA-Tool Windows driver. MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 6 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. 2.1.1 Install WinPcap If users are the 1 st time operating this tool, users should install WinpCap at first. Please follow below link and steps to install this software. https://www.winpcap.org/install/ WinPcap version: 4.1.2 or later. 1 2 3 4 MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 7 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. 2.1.2 Windows 7 Security for new x64 signature mechanism If you are the 1 st time to use this tool, you should update Windows Security for new X64 signature mechanism at first. Please follow below link to install this software. https://www.microsoft.com/en-us/download/details.aspx?id=46148 MT7921 SW Tool AN: Part-I Confidential B MediaTek Confidential © 2020 MediaTek Inc. Page 8 of 24 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. 2.1.3 Windows 10 install note If users can’t install the driver in Windows 10 due to driver integrity check. Try to disable the integrity check to allow installation. • Disable Driver Integrity Check 1. Open cmd as Administrator. 2. Execute ‘bcdedit /set nointegritychecks on’ 3. Reboot 4. Then install again. If still fail, try do ‘Disable Secure Boot’ below. NOTE: Re-enable the driver integrity check by executing ‘bcdedit /set nointegritychecks off’ and then rebooting. • Disable Secure Boot Please refer to: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/disabling-secure-boot MT7921 SW Tool AN: Part-I Confidential B MediaTek Confiden…

Text truncated - open the document above for the full version.

MEDIATEK Inc. No. 1, Dusing 1st Rd., Hsinchu Science Park Hsinchu City 30078 Taiwan DTS-UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC/ IC equipment authorization, Device FCC ID: RAS-MT7921 IC: 7542A-MT7921 (1) DFS Device -- Master Client with Radar detection capability , Client without radar detection capability N/A (2) Active / Passive Scanning , ad-hoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 5150 - 5250 MHz Yes , No Yes , No Yes , No Yes , No 5250 - 5350 MHz Yes , No Yes , No Yes , No Yes , No 5470 - 5725 MHz Yes , No Yes , No Yes , No Yes , No 5725 - 5850 MHz Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - Yes, No, Please check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. MEDIATEK Inc. No. 1, Dusing 1st Rd., Hsinchu Science Park Hsinchu City 30078 Taiwan (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) Sincerely, Client’s signature: Client’s name & title: Stella Chang/ Business Marketing Manager Contact information / address: MediaTek Inc. / No. 1, Duxing 1st Rd., East District, Hsinchu City 300 Taiwan

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: RAS-MT7921 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name & title: Stella Chang/ Business Marketing Manager Contact information / address: MediaTek Inc. / No. 1, Duxing 1st Rd., East District, Hsinchu City 300 Taiwan

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: RAS-MT7921 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days from the Grant Date. See KDB 726920. - e.g. User Manual - e.g. Internal Photos - e.g. external Photos - e.g. Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature: Client’s name & title: Stella Chang/ Business Marketing Manager Contact information / address: MediaTek Inc. / No. 1, Duxing 1st Rd., East District, Hsinchu City 300 Taiwan

MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan Date: 2020-09-17 FCC ID: RAS-MT7921 AUTHORIZATION LETTER To Whom It May Concern: MediaTek Inc. hereby authorizes Andrea Hsia/ Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia/ Supervisor of BV CPS Taoyuan on Media Tek Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Stella Chang/ Business Marketing Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

MediaTek Inc. No.1, Dusing 1st Rd., Hsinchu Science Park Date: 2020-01-09 A UTHORIZ A TION LETTER To whom it may concern: I, the undersigned Siegfried Chang of Media Tek Inc., hereby authorize Stella Chang of Media Tek Inc. to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by Stella Chang on my behalf shall have the same effects as acts of our own. This agreement is valid until permanent. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Siegfried Chang/ Manager MediaTek Inc. Tel.: + 886-3-5600868 Fax: + 886-3-6662673 E-mail: [email protected]

SCS-F26 Modular Approval Letter Page 2 of 2 Rev 12.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Modular Approval Declaration Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (Obsolete) 1.0 1.0 Dec-04-2006 Added IC Modular Letter (Obsolete) 1.0 2.0 Feb 16 2009 Add LMA and MA option (Obsolete) 2.0 3.0 April 14 2010 Revised per RSS Gen issue 3.0 (Obsolete) 3.0 4.0 Jan 12 2011 Removed Foot(2) (obsolete) 4.0 5.0 July 19 2011 Adding New note per KDB996369 D01 V01R03 (obsolete) 5.0 6.0 August 29 2011 Updated company template & Added text box (obsolete) 6.0 7.0 Jan-31-2012 Updated modular requirement (obsolete) 7.0 8.0 Sept 05 2014 Updated template to meet RSP 100 issue 10 (obsolete) 8.0 9.0 Nov 20 2014 Updated template to meet RSP 100 issue 11 (obsolete)) 9.0 10.0 March 19 2015 Revised the Modular Requirement statements (obsolete) 10.0 11.0 July 28, 2016 Updated template with BV logo (current) 11.0 12.0 June 26, 2019 SCS-F26 Modular Approval Letter Page 2 of 2 Rev 12.0 (Date) 09/18/2020 (2TX 11ax (WiFi6) + BLE Combo Card) FCC ID: RAS-MT7921 , is seeking FCC Authorization as a Single Modular Transmitter / Single Limited Modular Transmitter (Please check one) The EUT meets the requirements for Single Modular Approval / Single Limited Modular Approval (Please check one) as detailed in KDB 996369. Compliance to each of the requirements is described below: Item Modular requirement Yes No Please provide a detailed explanation if the answer is “No.” 1 Have its own RF shielding v 2 Have buffered modulation/data inputs (if such inputs are provided) v 3 The modular transmitter must have its own power supply regulation. v 4 Meet the antenna requirements of section 15.203 v 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. v 6 Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. v 7 The modular transmitter is manufactured so that the user can not influence the operation of the transmitter that will operate outside of the scope of the regulations. v 8 Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093. v Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. (3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. Client’s signature Client’s name / title Andrea Hsia/ Supervisor Contact information / address [email protected]/No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 MediaTek Inc. No.1, Duxing 1st Rd., East District, Hsinchu City 300, Taiwan To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, MediaTek Inc hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: RAS-MT7921 Product Description: 2TX 11ax (WiFi6) + BLE Combo Card Model: MT7921 Sincerely, Client’s signature: Client’s name & title: Stella Chang/ Business Marketing Manager Contact information / address: MediaTek Inc. / No. 1, Duxing 1st Rd., East District, Hsinchu City 300 Taiwan

Reference No.: 200317E01 Page 1/8 CONSTRUCTION PHOTOS OF EUT Reference No.: 200317E01 Page 2/8 Reference No.: 200317E01 Page 3/8 Reference No.: 200317E01 Page 4/8 Antenna-SET 1 Reference No.: 200317E01 Page 5/8 Reference No.: 200317E01 Page 6/8 Antenna-SET 2 Reference No.: 200317E01 Page 7/8 Reference No.: 200317E01 Page 8/8

Label Location EuT Front side

MediaTek Inc. Made in China Model: MT7921 FCC ID: RAS-MT7921, IC: 7542A-MT7921 MediaTek Inc. Made in China Model: MT7921 FCC ID: RAS-MT7921, IC: 7542A-MT7921

Reference No.: 200317E01 Page 1/1 CONSTRUCTION PHOTOS OF EUT

Report No.: SA200317E01 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200317E01 FCC ID: RAS-MT7921 Test Model: MT7921 Received Date: Mar. 17, 2020 Test Date: Sep. 08, 2020 Issued Date: Sep. 16, 2020 Applicant: MediaTek Inc. Address: No. 1, Dusing 1st Rd., Hsinchu Science Park Hsinchu City 30078 Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwa. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200317E01 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 7 Report No.: SA200317E01 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200317E01 Original release. Sep. 16, 2020 Report No.: SA200317E01 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: 2TX 11ax (WiFi6) + BLE Combo Card Brand: MediaTek Test Model: MT7921 Sample Status: ENGINEERING SAMPLE Applicant: MediaTek Inc. Test Date: Sep. 08, 2020 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3-2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 16, 2020 Vivian Huang / Specialist Approved by : , Date: Sep. 16, 2020 Clark Lin / Technical Manager Report No.: SA200317E01 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200317E01 Page No. 6 / 7 Report Format Version: 6.1.1 2.4 Antenna Gain Antenna Set RF Chain No. Brand Model Antenna Net Gain (dBi) Frequency range (GHz) Antenna Type Connector Type Cable Length (mm) Cable Loss (dB) Excluding cable loss Antenna Gain (dBi) 1 Chain0 Cortec AN2450-4902BRS 2.42 3.87 2.4~2.4835 5.15~5.85 Dipole R-SMA 150 2.4~2.4835GHz : 0.5dB 5.15~5.85GHz : 0.8dB 2.92 4.67 Chain1 Cortec AN2450-4902BRS 2.42 3.87 2.4~2.4835 5.15~5.85 Dipole R-SMA 150 2.4~2.4835GHz : 0.5dB 5.15~5.85GHz : 0.8dB 2.92 4.67 2 Chain0 PSA RFMTA340718EMLB302 3.18 4.92 2.4~2.4835 5.15~5.85 PIFA i-pex(MHF) 200 included Cable loss - Chain1 PSA RFMTA340718EMLB302 3.18 4.92 2.4~2.4835 5.15~5.85 PIFA i-pex(MHF) 200 included Cable loss - *The above Antenna information is declared by manufac…

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 28 Report No. : SF200317E01 Issued Date : Aug. 06, 2020 SAR Test Report Report No. : SF200317E01 Applicant : MediaTek Inc. Address : No. 1, Dusing 1st Rd., Hsinchu Science Park Hsinchu City 30078 Taiwan Product : 2TX 11ax (WiFi6) + BLE Combo Card FCC ID : RAS-MT7921 Brand : MediaTek Model No. : MT7921 Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 KDB 248227 D01 v02r02, KDB 447498 D01 v06 , KDB 616217 D04 v01r02 Sample Received Date : Mar. 17, 2020 Date of Testing : Jul. 17, 2020 ~ Jul. 27, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 28 Report No. : SF200317E01 Issued Date : Aug. 06, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test .......…

Text truncated - open the document above for the full version.