RAX7904WBRA-NDraft 11n Wireless 4-Port Annex A ADSL2/2 Router

ADSL2 Barricade N Draft 11n Wireless 4-port Annex A ADSL2/2+ Modem Router SMC7904WBRA-N 20 Mason Irvine, CA 92618 Phone: (949) 679-8000 Router with built-in ADSL2/2+ Modem From SMC’s line of award-winning connectivity solutions August 2007 R.01 F/W 0.11 Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our company for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of our company. We reserve the right to change specifications at any time without notice. Copyright © 2007 by SMC Networks, Inc. 20 Mason Irvine, CA 92618 All rights reserved. Trademarks: SMC is a registered trademark; and Barricade is a trademark of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders. i LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term. SMC will endeavor to repair or replace any product returned under warranty within 30 days of receipt of the product. The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering new products within 30 days of purchase from SMC or its Authorized Reseller. Registration can be accomplished via the enclosed product registration card or online via the SMC web site. Failure to register will not affect the standard limited warranty. The Limited Lifetime warranty covers a product during the Life of that Product, which is defined as the period of time during which the product is an “Active” SMC product. A product is considered to be “Active” while it is listed on the current SMC price list. As new technologies emerge, older technologies become obsolete and SMC will, at its discretion, replace an older product in its product line with one that incorporates these newer technologies. At that point, the obsolete product is discontinued and is no longer an “Active” SMC product. A list of discontinued products with their respective dates of discontinuance can be found at: http://www.smc.com/index.cfm?action=customer_service_warranty. All products that are replaced become the property of SMC. Replacement products may be either new or reconditioned. Any replaced or repaired product carries either a 30-day limited warranty or the remainder of the initial warranty, whichever is longer. SMC is not responsible for any custom software or firmware, configuration information, or memory data of Customer contained in, stored on, or integrated with any products returned to SMC pursuant to any warranty. Products returned to SMC should have any customer-installed accessory or add-on components, such as expansion modules, removed prior to returning the product for replacement. SMC is not responsible for these items if they are returned with the product. Customers must contact SMC for a Return Material Authorization number prior to returning any product to SMC. Proof of purchase may be required. Any product returned to SMC without a valid Return Material Authorization (RMA) number clearly marked on the outside of the package will be returned to customer at customer’s expense. For warranty claims within North America, please call our toll-free customer support number at (800) 762-4968. Customers are responsible for all shipping charges from their facility to SMC. SMC is responsible for return shipping charges from SMC to customer. LIMITED WARRANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS. * SMC will provide warranty service for one year following discontinuance from the active SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans, and cables are co…

Text truncated - open the document above for the full version.

CONFIGURING THE BARRICADE 4-26 1483 Routing Confirm PasswordConfirm password MTULeave the Maximum Transmission Unit (MTU) at the default value unless instructed by your ISP ParameterDescription IP AddressEnter the IP address provided by your ISP. Subnet MaskEnter the subnet mask address provided by your ISP. Default GatewayEnter the gateway address provided by your ISP. VPI/VCIEnter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) supplied by your ISP. EncapsulationSelect the encapsulation used by ISP from the drop down list. QoS ClassATM QoS classes including CBR, UBR and VBR PCR/SCR/MBSQoS Parameters - PCR, SCR and MBS are configurable. DHCP ClientCheck the box if your ISP assigns an IP address dynamically. ParameterDescription CONFIGURATION PARAMETERS 4-27 PPPoE ParameterDescription VPI/VCIEnter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) supplied by your ISP. EncapsulationSelect the encapsulation used by ISP from the drop-down menu. QoS ClassATM QoS classes including CBR, UBR and VBR PCR/SCR/MBSQoS Parameters - PCR, SCR and MBS are configurable. IP assigned by ISPSelect yes, if your ISP assigns IP address dynamically. IP AddressIf you have selected “No” in the previous field, type in the IP address provided by your ISP. Subnet MaskEnter the subnet mask address provided by your ISP. Connect TypeSets connection mode to Always connected, Auto-Triggered by traffic or Manual connection. For flat rate services use Always connected. Idle Time (Minute) Enter the maximum idle time for the Internet connection. After this time has been exceeded the connection will be terminated. This setting only applies when the Connect Type is set to Auto-Triggered by traffic. UsernameEnter user name. PasswordEnter password. CONFIGURING THE BARRICADE 4-28 IP Over RFC1483 bridged Confirm PasswordConfirm password MTULeave the Maximum Transmission Unit (MTU) at the default value unless instructed by your ISP. ParameterDescription IP AddressEnter the IP address provided by your ISP. Subnet MaskEnter the subnet mask address provided by your ISP. Default GatewayEnter the gateway address provided by your ISP. VPI/VCIEnter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) supplied by your ISP. EncapsulationSelect the encapsulation used by ISP from the drop-down menu. QoS ClassATM QoS classes including CBR, UBR and VBR PCR/SCR/MBSQoS Parameters - PCR, SCR and MBS are configurable. DHCP ClientCheck the box if your ISP assigns an IP address dynamically. ParameterDescription CONFIGURATION PARAMETERS 4-29 Clone MAC Address Some ISPs require you to register your MAC address with them. If this is the case, and you have previously registered the MAC address of another device, the MAC address of the Barricade must be changed to the MAC address that you have registered with your ISP. CONFIGURING THE BARRICADE 4-30 DNS A Domain Name Server (DNS) is an index of IP addresses and Web addresses. If you type a Web address into your browser, such as www.smc.com, a DNS server will find that name in its index and find the matching IP address: xxx.xxx.xxx.xxx. Most ISPs provide a DNS server for speed and convenience. Since your Service Provider may connect to the Internet with dynamic IP settings, it is likely that the DNS server IP's are also provided dynamically. However, if there is a DNS server that you would rather use, you need to specify the IP address here. CONFIGURATION PARAMETERS 4-31 LAN The LAN settings menu allows you to change the default IP address of the Barricade, modify the DHCP server settings. ParameterDescription LAN IP IP AddressThe IP address of the Barricade. IP Subnet MaskThe subnet mask of the Barricade. DHCP ServerThis option allows you to enable or disable the DHCP server function. By default DHCP is enabled. Lease TimeAllows you to select a pre-defined lease time for IP addresses assigned using DHCP. For home networks this may be set to Forever, which means there is no time limit on the IP address lease. IP Address Pool Start IP Address/ End IP address Specify the start/end IP address of the DHCP pool. Do not include the gateway address of the Barricade in the client address pool. If you change the pool range, make sure the first three octets match the gateway’s IP address, i.e., 192.168.2.xxx. Domain NameIf your network uses a domain name, enter it here. Otherwise, leave this field blank. CONFIGURING THE BARRICADE 4-32 Wireless The router also operates as a wireless access point, allowing wireless computers to communicate with each other. To configure this function, all you need to do is enable the wireless function, define the radio channel, the domain identifier, and the security options. •Enable or disable Wireless module function: select to enable or disable the wireless function. CONFIGURATION PARAMETERS 4-33 Channel and SSID You must specify a common radio channel and SSID (Service Set ID) to be used by the router and all of its wireless clients. Be sure you configure all of its clients to the same values. ParameterDescription SSIDThis is the Service Set ID. The SSID must be the same on the router and all of its wireless clients. SSID BroadcastSelect to enable/disable the brocasting of SSID. Enable this function for easy connection for the clients. Disable this function for increased security. Wireless ModeThe Router supports 11n, 11g, and 11b wireless networks. SMC recommend using “Mixed 802.11n, 802.11g and 802.11b” to provide compatibility with 11n, 11g and 11b wireless clients. ChannelThis is the radio channel used for wireless communication. CONFIGURING THE BARRICADE 4-34 Notes: 1.When bandwidth is set to 20 MHz, there would be no extension channel that can be selected. The extension channel is based on the main or primary channel. When the main channel is set to channel 1, channel 5 will be used as the extension channel. When the main channel is set to 9, the extension channel can be channel 5 or 13. 2.The availability of some…

Text truncated - open the document above for the full version.

A r c a d y a n T e c h n o l o g y C o r p o r a t i o n 4 F, N o . 9 , P a r k A v e n u e I I , S c i e n c e - b a s e d I n d u s t r i a l P a r k , H s i n c h u 3 0 0 , Ta i w a n , R . O . C . Date: 2007/11/5 G E N E R A L D E C L A R A T I O N We, Arcadyan Technology Corporation declares that device does not have “Ad Hoc on non-US frequencies” and/or “on DFS frequencies” while applying for the follow product. FCC ID: RAX7904WBRA-N If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! ----------------------------------------------- Simon Liu / Manager Email: [email protected] TEL: 886-3-578-7000 ext. 14250 FAX: 886-3-563-7325

Arcadyan Technology Corp. 4F, No.9, Park Avenue II, Science-based Industrial Park, Hsinchu 300, Taiwan P O WE R O F A T T O R NE Y 2007/8/22 To whom it may concern: We, the undersigned Arcadyan Technology Corporation hereby authorize Advance Data Technology Corporation (ADT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by ADT on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products： Draft 11n Wireless 4-Port Annex A ADSL2/2+ Modem Router ; Model No：SMC7904WBRA-N If you have any questions regarding the authorization, please don¡t hesitate to contact us. Thank you! Sincerely yours, __________________________________ Simon Liu / Manager Email: [email protected] TEL: 886-3-578-7000 ext. 14250 FAX: 886-3-563-7325

Arcadyan Technology Corp. 4F, No.9, Park Avenue II, Science-based Industrial Park, Hsinchu 300, Taiwan 2007/8/22 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: RAX7904WBRA-N Pursuant to Sections 0.457 and 0.459 of the Commission¡s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, __________________________________ Simon Liu / Manager Email: [email protected] TEL: 886-3-578-7000 ext. 14250 FAX: 886-3-563-7325

Page: 1 CONSTRUCTION PHOTOS OF EUT

15V 0.8A 10 CCXXxxYYyyyZzW add NCC logo 2 1 1 2 Complies with IDA Standards DB 100886 0560 5

FCC ID： ：： ：RAX7904WBRA-N LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page: 2 Page: 3 Page: 4 Page: 5 Page: 6 481508OO3CT adapter Page: 7 Page: 8 MU12-2150080-A1 adapter Page: 9

Report No.: SA960726H09 1 RF EXPOSURE REPORT REPORT NO.: SA960726H09 MODEL NO.: SMC7904WBRA-N ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Arcadyan Technology Corporation ADDRESS: 4F, No. 9, Park Avenue II, Science-based Industrial Park, Hsinchu 300, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. Report No.: SA960726H09 2 RF Exposure Measurement 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A)Limits For Occupational / Control Exposures 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 6 1500-100,000 ... ... 1.0 30 F = Frequency in MHz Report No.: SA960726H09 3 3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance 20cm. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device Report No.: SA960726H09 4 6. Test Results 6.1 Antenna Gain There are three antennas provided to this EUT, please refer to the following table: No. Antenna Type Antenna Connector Gain(dBi) 1 Dipole NA 3.5 2 PIFA NA 2 3 Dipole NA 3.5 6.2 Output Power Into Antenna & RF Exposure value at distance 20cm: For Part 802.11b: Maximum Antenna Gain: 3.5dBi Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 117.490 0.052 1.0 6 2437 131.826 0.059 1.0 11 2462 123.027 0.055 1.0 For Part 802.11g: Maximum Antenna Gain: 3.5dBi Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 104.713 0.047 1.0 6 2437 107.152 0.048 1.0 11 2462 93.325 0.042 1.0 Report No.: SA960726H09 5 DRAFT 802.11n (20MHz) OFDM Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 145.233 0.065 1.0 6 2437 176.221 0.078 1.0 11 2462 159.245 0.071 1.0 DRAFT 802.11n (40MHz) OFDM Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2422 113.778 0.051 1.0 4 2437 151.756 0.068 1.0 7 2452 86.584 0.039 1.0

Report No.: RF960726H09 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO.: RF960726H09 MODEL NO.: SMC7904WBRA-N RECEIVED: July 26, 2007 TESTED: Aug. 09 to Nov. 06, 2007 ISSUED: Nov. 08, 2007 APPLICANT: Arcadyan Technology Corporation ADDRESS: 4F, No. 9, Park Avenue II, Science-based Industrial Park, Hsinchu 300, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation TEST LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 106 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. No. 2177-01 Report No.: RF960726H09 2 Report Format Version 2.0.6 Table of Contents 1. CERTIFICATION....................................................................................................4 2. SUMMARY OF TEST RESULTS............................................................................5 2.1 MEASUREMENT UNCERTAINTY..........................................................................6 3. GENERAL INFORMATION.....................................................................................7 3.1 GENERAL DESCRIPTION OF EUT.......................................................................7 3.2 DESCRIPTION OF TEST MODES.........................................................................9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.......................10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................14 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................15 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................16 4. TEST TYPES AND RESULTS..............................................................................18 4.1 CONDUCTED EMISSION MEASUREMENT........................................................18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................18 4.1.2 TEST INSTRUMENTS..........................................................................................18 4.1.3 TEST PROCEDURES..........................................................................................19 4.1.4 DEVIATION FROM TEST STANDARD.................................................................19 4.1.5 TEST SETUP.......................................................................................................20 4.1.6 EUT OPERATING CONDITIONS.........................................................................20 4.1.7 TEST RESULTS...................................................................................................21 4.2 RADIATED EMISSION MEASUREMENT.............................................................25 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...........................................25 4.2.2 TEST INSTRUMENTS..........................................................................................26 4.2.3 TEST PROCEDURES..........................................................................................27 4.2.4 DEVIATION FROM TEST STANDARD.................................................................27 4.2.5 TEST SETUP.......................................................................................................28 4.2.6 EUT OPERATING CONDITIONS.........................................................................28 Below 1GHz Test Data.....................................................................................................29 4.2.7 TEST RESULTS...................................................................................................29 Above 1GHz Test Data.....................................................................................................30 4.2.8 TEST RESULTS...................................................................................................30 4.3 6dB BANDWIDTH MEASUREMENT....................................................................58 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................58 4.3.2 TEST INSTRUMENTS..........................................................................................58 4.3.3 TEST PROCEDURE.............................................................................................59 4.3.4 DEVIATION FROM TEST STANDARD.................................................................59 4.3.5 TEST SETUP.......................................................................................................59 4.3.6 EUT OPERATING CONDITIONS.........................................................................59 4.3.7 TEST RESULTS...................................................................................................60 Report No.: RF960726H09 3 Report Format Version 2.0.6 4.4 MAXIMUM PEAK OUTPUT POWER....................................................................72 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................72 4.4.2 INSTRUMENTS....................................................................................................72 4.4.3 TEST PROCEDURES..........................................................................................73 4.4.4 DEVIATION FROM TEST STANDARD.................................................................73 4.4.5 TEST SETUP.......................................................................................................73 4.4.6 EUT OPERATING CONDITIONS.........................................................................73 4.4.7 TEST RESULTS...................................................................................................74 4.5 POWER SPECTRAL DENSITY MEASUREMENT.....…

Text truncated - open the document above for the full version.

Report No.: RF960726H09 61 Report Format Version 2.0.6 CH6 CH11 Report No.: RF960726H09 62 Report Format Version 2.0.6 802.11g OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang CHANNEL CHANNEL FREQUENCY (MHz) 6dB BANDWIDTH (MHz) MINIMUM LIMIT (MHz) PASS / FAIL 1 2412 16.5 0.5 PASS 6 2437 16.65 0.5 PASS 11 2462 16.5 0.5 PASS CH1 Report No.: RF960726H09 63 Report Format Version 2.0.6 CH6 CH11 Report No.: RF960726H09 64 Report Format Version 2.0.6 DRAFT 802.11n (20MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6.5Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang 6dB BANDWIDTH (MHz) CHANNEL CHANNEL FREQUENCY (MHz) CHAIN(0) CHAIN(1) MINIMUM LIMIT (MHz) PASS / FAIL 1 2412 17.6 17.7 0.5 PASS 6 2437 17.65 17.5 0.5 PASS 11 2462 17.55 17.65 0.5 PASS For Chain(0): CH1 Report No.: RF960726H09 65 Report Format Version 2.0.6 CH6 CH11 Report No.: RF960726H09 66 Report Format Version 2.0.6 For CHAIN(1): CH1 CH6 Report No.: RF960726H09 67 Report Format Version 2.0.6 CH11 Report No.: RF960726H09 68 Report Format Version 2.0.6 DRAFT 802.11n (40MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 13.5Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang 6dB BANDWIDTH (MHz) CHANNEL CHANNEL FREQUENCY (MHz) CHAIN(0) CHAIN(1) MINIMUM LIMIT (MHz) PASS / FAIL 1 2422 35.6 36.1 0.5 PASS 4 2437 35.7 35.8 0.5 PASS 7 2452 35.9 35.9 0.5 PASS For Chain (0): CH1 Report No.: RF960726H09 69 Report Format Version 2.0.6 CH4 CH7 Report No.: RF960726H09 70 Report Format Version 2.0.6 For Chain (1): CH1 CH4 Report No.: RF960726H09 71 Report Format Version 2.0.6 CH7 Report No.: RF960726H09 72 Report Format Version 2.0.6 4.4 MAXIMUM PEAK OUTPUT POWER 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT The Maximum Peak Output Power Measurement is 30dBm. 4.4.2 INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSP40 100037 Nov. 08, 2007 Agilent SIGNAL GENERATOR E8257C MY43320668 Dec. 07, 2007 TEKTRONIX OSCILLOSCOPE TDS380 B016335 Aug. 15, 2008 NARDA DETECTOR 4503A FSCM99899 NA NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. Report No.: RF960726H09 73 Report Format Version 2.0.6 4.4.3 TEST PROCEDURES 1. A detector was used on the output port of the EUT. An oscilloscope was used to read the response of the detector. 2. Replaced the EUT by the signal generator. The center frequency of the S.G was adjusted to the center frequency of the measured channel. 3. Adjusted the power to have the same reading on oscilloscope. Record the power level. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 TEST SETUP 4.4.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 EUT or S.G OSCILLOSCOPE DETECTOR Report No.: RF960726H09 74 Report Format Version 2.0.6 4.4.7 TEST RESULTS 802.11b DSSS MODULATION: MODULATION TYPE CCK TRANSFER RATE 11Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) PEAK POWER LIMIT (dBm) PASS / FAIL 1 2412 117.490 20.70 30 PASS 6 2437 131.826 21.20 30 PASS 11 2462 123.027 20.90 30 PASS 802.11g OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang CHANNEL CHANNEL FREQUENCY (MHz) PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) PEAK POWER LIMIT (dBm) PASS / FAIL 1 2412 104.713 20.20 30 PASS 6 2437 107.152 20.30 30 PASS 11 2462 93.325 19.70 30 PASS Report No.: RF960726H09 75 Report Format Version 2.0.6 DRAFT 802.11n (20MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6.5Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) CHANNEL CHANNEL FREQUENCY (MHz) CHAIN(0) CHAIN(1) CHAIN(0) CHAIN(1) TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) PEAK POWER LIMIT (dBm) PASS / FAIL 1 2412 67.61 77.62 18.30 18.90 145.23 21.6 30 PASS 6 2437 89.13 87.10 19.50 19.40 176.23 22.5 30 PASS 11 2462 74.13 85.11 18.70 19.30 159.24 22.0 30 PASS DRAFT 802.11n (40MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 13.5Mbps INPUT POWER (SYSTEM) 120Vac, 60 Hz ENVIRONMENTAL CONDITIONS 26deg.C, 68%RH, 955hPa TESTED BY Phoenix Huang PEAK POWER OUTPUT (mW) PEAK POWER OUTPUT (dBm) CHANNEL CHANNEL FREQUENCY (MHz) CHAIN(0) CHAIN(1) CHAIN(0) CHAIN(1) TOTAL PEAK POWER (mW) TOTAL PEAK POWER (dBm) PEAK POWER LIMIT (dBm) P…

Text truncated - open the document above for the full version.