RBWEMCM21CHandheld Terminal

Rev 1/26/2023 Elo Touch Solutions, Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 31, 2025 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RBW Elo Touch Solutions, Inc. certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0034033522 Company Name: Elo Touch Solutions, Inc. Address: 670 N. McCarthy Blvd., Suite 100, Milpitas, CA 95035, USA. Contact Person: Angela Huang Tel.: 886-2-8768-2788 E-mail: [email protected] Sincerely, Signature: Printed Name: Angela Huang Job Position: Safety Engineer E-mail: [email protected]

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Elo Touch Solutions, Inc. Address 670 N. McCarthy Blvd., Suite 100, Milpitas, CA 95035, USA. FRN 0022239222 Grantee Code RBW FCC ID: RBWEMCM21C Authorized Contact Name Angela Huang Contact Phone 886-2-8768-2788 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026-03-12 Print Name: Angela Huang Title: Safety Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Elo Touch Solutions, Inc. Address 670 N. McCarthy Blvd., Suite 100, Milpitas, CA 95035, USA. FRN 0022239222 Grantee Code RBW FCC ID: RBWEMCM21C Authorized Contact Name Angela Huang Contact Phone 886-2-8768-2788 Contact Email [email protected] Elo Touch Solutions, Inc. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2026-03-12 Print Name: Angela Huang Title: Safety Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Elo Touch Solutions, Inc. Date: 2026-03-12 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: RBWEMCM21C To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Elo Touch Solutions, Inc. This authorization is valid until further written notice from the applicant. Name (Printed): Angela Huang Title: Safety Engineer Signature: On behalf of Company: Elo Touch Solutions, Inc. Telephone: 886-2-8768-2788

Elo Touch Solutions, Inc. 2026-03-12 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Elo Touch Solutions, Inc. 670 N. McCarthy Blvd., Suite 100, Milpitas, CA 95035, USA. Regarding: Confidentiality Request regarding application for FCC ID: RBWEMCM21C LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions NII Software Security Info BOM Tune up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manual Printed Name: Angela Huang Title: Safety Engineer Company Name: Elo Touch Solutions, Inc.

Page 1 of 1 Label Label Location

` Report No.: SUCR251200117401 Page:1 of 12 AppendixA DetailedSystemCheckResults 1. System Performance Check System Performance Check 13 MHz System Performance Check 750 MHz System Performance Check 835 MHz System Performance Check 1750 MHz System Performance Check 1950 MHz System Performance Check 2450 MHz System Performance Check 2600 MHz System Performance Check 5250 MHz System Performance Check 5600 MHz System Performance Check 5750 MHz Date: 2026/1/12 Test Laboratory: SGS-SAR Lab System Check_Head_13MHz DUT: CLA-13; Type: CLA-13; Serial: SN1032 Communication System: UID 0, CW (0); Frequency: 13 MHz;Duty Cycle: 1:1 Medium: HSL_13;Medium parameters used: f = 13 MHz; σ = 0.733 S/m; ε r = 55.821; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN3982; ConvF(15.44, 17.46, 16.16); Calibrated: 2025/11/07 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 • Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 Ax; Serial: 1239 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.145 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.14 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 0.198 W/kg SAR(1 g) = 0.112 W/kg; SAR(10 g) = 0.073 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 58.2% Maximum value of SAR (measured) = 0.162 W/kg 0 dB = 0.145 W/kg = -8.39 dBW/kg Date: 2026/01/01 Test Laboratory: SGS-SAR Lab System Performance Check 750 MHz Head DUT: D750V3; Type: Dipole; Serial: 1214 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL750;Medium parameters used: f = 750 MHz; σ = 0.892 S/m; ε r = 41.908; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN7735; ConvF(8.46, 8.81, 8.65); Calibrated: 2025/01/29 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 • Phantom: SAM 8; Type: SAM; Serial: 1824 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.57 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 50.15 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 3.32 W/kg SAR(1 g) = 2.21 W/kg; SAR(10 g) = 1.51 W/kg Smallest distance from peaks to all points 3 dB below = 16.3 mm Ratio of SAR at M2 to SAR at M1 = 67.4% Maximum value of SAR (measured) = 2.93 W/kg 0 dB = 2.93 W/kg = 4.67 dBW/kg Date: 2026/01/02 Test Laboratory: SGS-SAR Lab System Performance Check 835 MHz Head DUT: D835V2; Type: Dipole; Serial: 4d161 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL835;Medium parameters used: f = 835 MHz; σ = 0.909 S/m; ε r = 42.329; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN7735; ConvF(8.27, 8.61, 8.46); Calibrated: 2025/01/29 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 • Phantom: SAM 8; Type: SAM; Serial: 1824 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.09 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 61.71 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 3.63 W/kg SAR(1 g) = 2.47 W/kg; SAR(10 g) = 1.59 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 67.8% Maximum value of SAR (measured) = 3.12 W/kg 0 dB = 3.12 W/kg = 4.94 dBW/kg Date: 2026/01/03 Test Laboratory: SGS-SAR Lab System Performance Check 1750 MHz Head DUT: D1750V2; Type: Dipole; Serial: 1105 Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL1750;Medium parameters used: f = 1750 MHz; σ = 1.33 S/m; ε r = 39.026; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN7735; ConvF(7.63, 7.94, 7.80); Calibrated: 2025/01/29 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 • Phantom: SAM 8; Type: SAM; Serial: 1824 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 8.86 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 101.5 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 16.0 W/kg SAR(1 g) = 8.93 W/kg; SAR(10 g) = 4.71 W/kg Smallest distance from peaks to all points 3 dB below = 11 mm Ratio of SAR at M2 to SAR at M1 = 57.6% Maximum value of SAR (measured) = 9.31 W/kg 0 dB = 9.31 W/kg = 9.69 dBW/kg Date: 2026/01/04 Test Laboratory: SGS-SAR Lab System Performance Check 1950 MHz Head DUT: D1950V3; Type: Dipole; Serial: 1218 Communication System: UID 0, CW (0); Frequency: 1950 MHz;Duty Cycle: 1:1 Medium: HSL1950;Medium parameters used: f = 1950 MHz; σ = 1.4 S/m; ε r = 39.235; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN7735; ConvF(7.46, 7.77, 7.63); Calibrated: 2025/01/29 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 • Phantom: SAM 8; Type: SAM; Serial: 1824 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (9x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 14.5 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 96.69 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 18.63 W/kg SAR(1 g) = 9.99 W/kg; SAR(10 g) = 5.14 W/kg Smallest distance fro…

Text truncated - open the document above for the full version.

` Report No.: SUCR251200117401 Page:1 of 13 AppendixB DetailedTestResults 1. LTE LTE Band 7 LTE Band 12(17) LTE Band 13 LTE Band 25(2) LTE Band 26(5) LTE Band 41 LTE Band 66(4) 2. WIFI WIFI 2.4G WIFI 5G 3. BT BT 4. NFC Date: 2026/01/06 Test Laboratory: SGS-SAR Lab EMC-M21C LTE Band 7 20M QPSK 1RB0 Ch21100 Back side 0mm DUT: EMC-M21C; Type: Handheld Terminal; Serial: 355118645002470 Communication System: UID 0, LTE-FDD BW 20MHz (0); Frequency: 2535 MHz;Duty Cycle: 1:1 Medium: HSL2600;Medium parameters used: f = 2535 MHz; σ = 1.885 S/m; ε r = 38.998; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN7735; ConvF(6.78, 7.05, 6.93); Calibrated: 2025/01/29 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (11x19x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 5.37 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 7.71 W/kg SAR(1 g) = 3.57 W/kg; SAR(10 g) = 1.57 W/kg Smallest distance from peaks to all points 3 dB below = 7 mm Ratio of SAR at M2 to SAR at M1 = 46.9% Maximum value of SAR (measured) = 6.14 W/kg 0 dB = 6.14 W/kg = 7.88 dBW/kg Date: 2026/01/01 Test Laboratory: SGS-SAR Lab EMC-M21C LTE Band 12 10M QPSK 1RB0 Ch23095 Bottom side 0mm DUT: EMC-M21C; Type: Handheld Terminal; Serial: 355118645002470 Communication System: UID 0, LTE-FDD BW 10MHZ (0); Frequency: 707.5 MHz;Duty Cycle: 1:1 Medium: HSL750;Medium parameters used: f = 707.5 MHz; σ = 0.893 S/m; ε r = 42.194; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN7735; ConvF(8.46, 8.81, 8.65); Calibrated: 2025/01/29 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.59 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.51 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 5.12 W/kg SAR(1 g) = 1.39 W/kg; SAR(10 g) = 0.600 W/kg Smallest distance from peaks to all points 3 dB below = 8.4 mm Ratio of SAR at M2 to SAR at M1 = 36.1% Maximum value of SAR (measured) = 3.30 W/kg 0 dB = 3.30 W/kg = 5.19 dBW/kg Date: 2026/01/01 Test Laboratory: SGS-SAR Lab EMC-M21C LTE Band 13 10M QPSK 1RB0 Ch23230 Bottom side 0mm DUT: EMC-M21C; Type: Handheld Terminal; Serial: 355118645002470 Communication System: UID 0, LTE-FDD BW 10MHZ (0); Frequency: 782 MHz;Duty Cycle: 1:1 Medium: HSL750;Medium parameters used: f = 782 MHz; σ = 0.895 S/m; ε r = 41.395; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN7735; ConvF(8.46, 8.81, 8.65); Calibrated: 2025/01/29 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.86 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.66 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 5.77 W/kg SAR(1 g) = 1.67 W/kg; SAR(10 g) = 0.743 W/kg Smallest distance from peaks to all points 3 dB below = 8.4 mm Ratio of SAR at M2 to SAR at M1 = 37.6% Maximum value of SAR (measured) = 3.81 W/kg 0 dB = 3.81 W/kg = 5.81 dBW/kg Date: 2026/01/04 Test Laboratory: SGS-SAR Lab EMC-M21C LTE Band 25 20M QPSK 1RB0 Ch26365 Back side 0mm DUT: EMC-M21C; Type: Handheld Terminal; Serial: 355118645002470 Communication System: UID 0, LTE-FDD BW 20MHz (0); Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: HSL1950;Medium parameters used: f = 1882.5 MHz; σ = 1.335 S/m; ε r = 39.455; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN7735; ConvF(7.46, 7.77, 7.63); Calibrated: 2025/01/29 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (9x16x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.38 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.601 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 6.25 W/kg SAR(1 g) = 2.84 W/kg; SAR(10 g) = 1.32 W/kg Smallest distance from peaks to all points 3 dB below = 8.2 mm Ratio of SAR at M2 to SAR at M1 = 44.1% Maximum value of SAR (measured) = 4.69 W/kg 0 dB = 4.69 W/kg = 6.71 dBW/kg Date: 2026/01/02 Test Laboratory: SGS-SAR Lab EMC-M21C LTE Band 26 15M QPSK 1RB0 Ch26865 Bottom side 0mm DUT: EMC-M21C; Type: Handheld Terminal; Serial: 355118645002470 Communication System: UID 0, LTE-FDD BW 15MHz (0); Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium: HSL835;Medium parameters used: f = 831.5 MHz; σ = 0.904 S/m; ε r = 42.401; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN7735; ConvF(8.27, 8.61, 8.46); Calibrated: 2025/01/29 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.07 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.42 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 6.66 W/kg SAR(1 g) = 2.11 W/kg; SAR(10 g) = 0.968 W/kg Smallest distance from peaks to all points 3 dB bel…

Text truncated - open the document above for the full version.

` Report No.: SUCR251200117401 Page:1 of 91 Appendix C Calibration certificate 1. Dipole CLA13-SN1032 D750V3-SN 1214 D835V2-SN 4d161 D1750V2-SN1105 D1950V3-SN 1218 D2450V2-SN 922 D2600V2-SN 1158 D5GHzV2-SN 1174 2. DAE DAE4-SN 1245 DAE4-SN 1740 3. Probe EX3DV4-SN 7735 EX3DV4-SN 3982 4. Dipole Extend

Dipole CLA13 SN 1032 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-02-09-23.4/51/6.8/ 2024-02-08-23.20.85%50.70.36.50.3 2025-02-07-23.30.43%50.80.26.30.5 Dipole D835V2 SN 4d161 HeadLiquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-08-25-29.3/50.3/-3.44/ 2024-08-24-29.10.68%50.10.2-3.590.15 2025-08-23-29.20.34%50.20.1-3.520.08 Dipole D1750V2 SN 1105 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （jΩ） ΔjΩ 2023-11-03-29.1/47.8/-2.61/ 2024-11-02-28.90.69%47.70.1-2.710.1 2025-11-01-28.52.06%47.60.2-2.880.27 Dipole D1950V2 SN 1218 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-05-04-25.6/48/-4.71/ 2024-05-03-25.31.17%47.70.3-4.820.11 2025-05-02-25.21.56%47.60.4-4.860.15 DipoleD2450V2SN922 Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-08-28-24.3/53.2/5.45/ 2024-08-27-24.10.82%52.90.35.230.22 2025-08-26-24.20.41%530.25.290.16 DipoleD5GHzV2SN1174 5250MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-08-23-22.1/47.3/-7.19/ 2024-08-22-21.90.90%47.10.2-7.350.16 2025-08-21-220.45%47.20.1-7.280.09 5600MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-08-23-27.4/53.9/-2.14/ 2024-08-22-27.11.09%53.70.2-2.350.21 2025-08-21-27.21.09%53.80.1-2.230.09 5750MHz Head Liquid Date of Measurement Return Loss(dB) Δ % Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2023-08-23-24.6/53.2/-5.17/ 2024-08-22-24.21.63%52.90.3-5.390.22 2025-08-21 -24.41.63%53.10.1-5.270.1 ` Report No.: SUCR251200117401 Page:91 of 91 - End of the Appendix -

` Report No.: SUCR251200117401 Page: 1 of 22 Appendix E Conducted RF Output Power ` Report No.: SUCR251200117401 Page: 2 of 22 1 Conducted Power of Legacy 1.1 Conducted Power of Legacy LTE Band 2 Conducted Power(dBm) Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18607 18900 19193 1.4MHz QPSK 1 0 23.43 23.21 23.04 24.50 1 2 23.47 23.28 23.15 24.50 1 5 23.39 23.18 23.04 24.50 3 0 23.43 23.18 23.03 24.50 3 2 23.45 23.19 23.09 24.50 3 3 23.35 23.20 22.96 24.50 6 0 22.51 22.24 22.05 23.50 16QAM 1 0 22.53 22.36 22.19 23.50 1 2 22.78 22.56 22.49 23.50 1 5 22.89 22.35 22.26 23.50 3 0 22.39 22.25 21.97 23.50 3 2 22.55 22.31 21.96 23.50 3 3 22.35 22.20 22.04 23.50 6 0 21.52 21.36 21.18 22.50 64QAM 1 0 22.39 22.38 22.02 22.50 1 2 22.18 22.35 22.26 22.50 1 5 22.46 22.32 21.99 22.50 3 0 22.41 21.99 22.14 22.50 3 2 22.26 22.16 21.96 22.50 3 3 22.50 22.17 22.01 22.50 6 0 21.44 21.16 21.08 21.50 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18615 18900 19185 3MHz QPSK 1 0 23.47 23.07 23.08 24.50 1 7 23.38 23.22 22.99 24.50 1 14 23.38 23.09 22.88 24.50 8 0 22.48 22.32 22.05 23.50 8 4 22.44 22.22 22.15 23.50 8 7 22.45 22.18 22.06 23.50 15 0 22.52 22.19 22.11 23.50 16QAM 1 0 22.63 22.29 22.38 23.50 1 7 22.78 22.31 22.37 23.50 1 14 22.49 22.55 22.20 23.50 8 0 21.53 21.25 21.12 22.50 8 4 21.49 21.22 21.23 22.50 8 7 21.39 21.26 21.17 22.50 15 0 21.52 21.22 21.15 22.50 64QAM 1 0 21.40 21.41 21.35 22.50 1 7 21.63 21.22 21.04 22.50 1 14 21.48 21.06 20.92 22.50 8 0 20.45 20.39 20.22 21.50 8 4 20.49 20.24 20.07 21.50 8 7 20.39 20.16 20.01 21.50 15 0 20.42 20.27 20.11 21.50 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18625 18900 19175 5MHz QPSK 1 0 23.44 23.26 23.20 24.50 1 13 23.31 23.16 23.07 24.50 1 24 23.42 23.15 22.53 24.50 12 0 22.57 22.20 22.14 23.50 12 6 22.42 22.24 22.23 23.50 12 13 22.47 22.21 22.15 23.50 25 0 22.42 22.20 22.10 23.50 16QAM 1 0 22.82 22.51 22.37 23.50 1 13 22.44 22.40 22.16 23.50 1 24 22.77 22.29 21.73 23.50 12 0 21.50 21.23 21.18 22.50 12 6 21.33 21.27 21.17 22.50 12 13 21.29 21.26 21.10 22.50 25 0 21.33 21.23 21.15 22.50 64QAM 1 0 21.56 21.32 21.31 22.50 ` Report No.: SUCR251200117401 Page: 3 of 22 1 13 21.50 21.12 21.18 22.50 1 24 21.51 21.20 20.68 22.50 12 0 20.57 20.19 20.17 21.50 12 6 20.41 20.37 20.19 21.50 12 13 20.47 20.19 20.19 21.50 25 0 20.49 20.28 20.12 21.50 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18650 18900 19150 10MHz QPSK 1 0 23.35 23.39 23.32 24.50 1 25 23.33 23.21 23.06 24.50 1 49 23.16 23.20 22.99 24.50 25 0 22.35 22.18 22.04 23.50 25 13 22.31 22.25 22.13 23.50 25 25 22.37 22.06 22.02 23.50 50 0 22.47 22.17 22.18 23.50 16QAM 1 0 22.66 22.64 22.58 23.50 1 25 22.64 22.37 22.42 23.50 1 49 22.38 22.41 22.45 23.50 25 0 21.36 21.21 21.14 22.50 25 13 21.36 21.18 21.16 22.50 25 25 21.33 21.09 21.14 22.50 50 0 21.42 21.20 21.21 22.50 64QAM 1 0 21.64 21.37 21.28 22.50 1 25 21.38 21.41 21.25 22.50 1 49 21.12 21.10 21.08 22.50 25 0 20.23 20.17 20.09 21.50 25 13 20.41 20.20 20.10 21.50 25 25 20.32 20.14 20.12 21.50 50 0 20.44 20.26 20.16 21.50 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18675 18900 19125 15MHz QPSK 1 0 23.43 23.35 23.41 24.50 1 38 23.26 23.21 23.19 24.50 1 74 22.99 23.36 22.52 24.50 36 0 22.39 22.20 22.22 23.50 36 18 22.29 22.22 22.22 23.50 36 39 22.33 22.04 22.07 23.50 75 0 22.36 22.17 22.20 23.50 16QAM 1 0 22.60 22.38 22.63 23.50 1 38 22.34 22.16 22.33 23.50 1 74 22.24 22.58 21.83 23.50 36 0 21.29 21.14 21.14 22.50 36 18 21.29 21.16 21.14 22.50 36 39 21.36 21.06 21.09 22.50 75 0 21.37 21.20 21.19 22.50 64QAM 1 0 21.67 21.09 21.09 22.50 1 38 21.06 21.22 21.12 22.50 1 74 20.74 21.28 21.36 22.50 36 0 20.36 20.21 20.18 21.50 36 18 20.27 20.24 20.24 21.50 36 39 20.35 20.14 20.19 21.50 75 0 20.31 20.16 20.24 21.50 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 18700 18900 19100 20MHz QPSK 1 0 23.44 23.51 23.48 24.50 1 50 23.22 23.06 22.98 24.50 1 99 22.84 22.89 22.55 24.50 50 0 22.46 22.54 22.42 23.50 50 25 22.40 22.24 22.22 23.50 50 50 22.25 22.07 22.05 23.50 100 0 22.31 22.35 22.18 23.50 16QAM 1 0 22.23 22.35 22.30 23.50 1 50 22.00 22.30 22.39 23.50 1 99 21.62 21.95 21.92 23.50 50 0 21.46 21.29 21.26 22.50 50 25 21.43 21.29 21.22 22.50 50 50 21.30 21.12 21.09 22.50 100 0 21.41 21.19 21.21 22.50 64QAM 1 0 21.54 21.35 21.19 22.50 1 50 21.37 20.95 20.99 22.50 ` Report No.: SUCR251200117401 Page: 4 of 22 1 99 21.01 20.58 21.04 22.50 50 0 20.25 20.16 20.23 21.50 50 25 20.36 20.26 20.20 21.50 50 50 20.27 20.09 20.08 21.50 100 0 20.34 20.18 20.19 21.50 LTE Band 4 Conducted Power(dBm) Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 19957 20175 20393 1.4MHz QPSK 1 0 22.89 23.05 23.03 24.00 1 2 23.02 23.01 23.03 24.00 1 5 22.99 22.84 22.98 24.00 3 0 23.09 22.92 23.07 24.00 3 2 23.13 22.83 23.06 24.00 3 3 22.92 22.85 23.00 24.00 6 0 22.05 21.86 22.08 23.00 16QAM 1 0 22.12 22.10 22.28 23.00 1 2 22.32 22.33 22.20 23.00 1 5 22.29 22.05 22.38 23.00 3 0 22.19 22.02 22.04 23.00 3 2 22.03 22.06 21.96 23.00 3 3 21.99 21.94 21.95 23.00 6 0 21.05 21.00 21.02 22.00 64QAM 1 0 21.67 21.65 21.83 22.00 1 2 21.92 21.70 21.72 22.00 1 5 21.91 21.50 21.65 22.00 3 0 21.38 21.59 21.66 22.00 3 2 21.53 21.55 21.61 22.00 3 3 21.44 21.43 21.50 22.00 6 0 20.56 20.39 20.59 21.00 Bandwidth Modulation RB size RB offset Channel Channel Channel Tune up 19965 20175 20385 3MHz QPSK 1 0 22.87 23.23 23.19 24.00 1 7 22.73 22.99 22.88 24.00 1 14 22.80 22.60 22.62 24.00 8 0 22.04 22.00 21.90 23.00 8 4 21.89 22.04 22.05 23.00 8 7 22.06 22.07 21.94 23.00 15 0 21.94 22.07 21.97 23.00 16QAM 1 0 22.51 22.51 22.43 23.00 1 7 22.04 22.22 22.15 23.00 1 14 22.13 22.03 21.93 23.00 8 0 20.77 20.96 20.99 22.00 8 4 20.89 21.07 21.05 22.00 8 7 21.00 21.14 20.93 22.00 15 0 20.89 21.01 20.99 22.00 64QAM 1 0 21.76 21.75 21.48 22.00 1 7 21.61 21.42 21.41 22.00 1 14 21.21 21.20 21.09 22.00 8 0 20.33 20.41 20.51 21.00 8 4 20.44 20.59 20.49 21.00 8 7 20.48 2…

Text truncated - open the document above for the full version.

` Report No.: SUCR251200117401 Page: 1 of 56 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] SAR TEST REPORT Application No.: SUCR2512001174TL Applicant: Elo Touch Solut…

Text truncated - open the document above for the full version.