RBWESY19M-HID5121Touch Computer

VuPoint™ M-Series Touchcomputer User Guide VuPoint™ M-Series LCD Multi-function Touchcomputer [19” model shown with optional accessories VuPoint M-Series] VuPoint™ M-Series Touchcomputer User Guide ii Elo Touch Solutions VuPoint™ M-Series Touchcomputer User Guide Multi-function Touchcomputer Revision B SW200069 1-800-ELOTOUCH (1-800-356-8682) www.elotouch.com VuPoint™ M-Series Touchcomputer User Guide iii Copyright © 2013 Elo Touch Solutions Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions. Disclaimer The information in this document is subject to change without notice. Elo Touch Solutions Inc. Elo Touch Solutions makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo Touch Solutions reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo Touch Solutions to notify any person of such revisions or changes. Trademark Acknowledgments AccuTouch, Elo TouchSystems, Elo TouchSystems (logo), Elo, IntelliTouch, iTouch, Elo Touch Solutions Inc., Elo Touch Solutions, and Elo Touch Solutions (logo) are trademarks. Windows is a trademark of Microsoft Corporation. Other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Elo Touch Solutions claims no interest in trademarks other than its own. VuPoint™ M-Series Touchcomputer User Guide iv Warnings and Cautions Warning • Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other flammable materials. • To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture. • Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the power cord can be fully inserted. • RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of electrical shock, DO NOT remove the back of the equipment or open the enclosure. No user-serviceable parts are inside. Refer servicing to qualified field service engineers only. • Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock. Avoid contact with any part inside the unit. • This device complies with the electromagnetic emission and immunity standards and is limited to the standards that are listed on pages 41 and 45. Other devices which are not designed to withstand emission levels as specified in the medical device standards may be susceptible to interference from this device. Subjecting the device to conditions beyond the rated performance capabilities may result in emissions in excess of the standard. If it is determined that this device produces electromagnetic or other interference it must be disconnected from power until the cause of the problem has been determined and resolved. If it is determined that this device is functioning improperly due to electromagnetic and other interference it must be disconnected from power until the cause of the problem has been determined and resolved. • Elo Touch Solutions recommends that after its useful life (or after sustaining unrepairable damage), customers dispose of the touchcomputer and its power supply in an environmentally sound manner. Acceptable methods include the reuse of parts or whole products and the recycling of products, components, and materials. Please consult and obey national state, and local laws and ordinances governing the safe disposal of electronic equipment. • Do not modify this equipment without authorization of the manufacturer. This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or federal laws. VuPoint™ M-Series Touchcomputer User Guide v Caution  Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord.  This unit must follow the national requirement and local state laws to dispose unit.  Before connecting the cables to your Elo touchcomputer, make sure all components are powered OFF.  Only approved components complying with IEC 60601-1 series can be connected to 15MX/19MX Touchcomputer for Healthcare Applications in Patient Environment. The use of ACCESSORY equipment not complying with the equivalent safety requirements of this equipment may lead to a reduced safety of the resulting system. Consideration relating to the choices of accessory equipment should include: Use of accessory in the patient environment.· Evidence that the safety certification of the accessory has been performed in accordance to the appropriate IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard.  For continued safety  This unit only complies to the above standards if used with a medical grade power cord.  A medical grade power supply, such as the one specified, is required for use in a medical application.  Please do not touch the patient and the touchcomputer output connecter at the same time.  The touchmonitor is to be used with following adaptor: 1. XP Power / AHM85PS12 or 2. Elo Touch Solutions / FSP110-RAAM Disposing of your old product Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between…

Text truncated - open the document above for the full version.

RV-0000000 Project No.: 1309222 Page 2 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 3 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 4 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 41 of 4 6 Neutron Engineering Inc. External Power Supply (optional): XP, AHM85PS12 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 42 of 4 6 Neutron Engineering Inc. External Power Supply (optional): XP, AHM85PS12 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 43 of 4 6 Neutron Engineering Inc. External Power Supply (optional): Elo Touch Solutions, FSP110-RAAM 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 44 of 4 6 Neutron Engineering Inc. External Power Supply (optional): Elo Touch Solutions, FSP110-RAAM 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 45 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 46 of 4 6 Neutron Engineering Inc. 1309222

RV-0000000 Project No.: 1309222 Page 5 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 6 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 7 of 4 6 Neutron Engineering Inc. 1309222 1309 222 RV-0000000 Project No.: 1309222 Page 8 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 9 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 10 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 11 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 12 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 13 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 14 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 15 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 16 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 17 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 18 of 4 6 Neutron Engineering Inc. 2 Units 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 19 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 20 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 21 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 22 of 4 6 Neutron Engineering Inc. RFID Module 1309222 RV-0000000 Project No.: 1309222 Page 23 of 4 6 Neutron Engineering Inc. RFID Module 1309222 130922 2 Antenna RV-0000000 Project No.: 1309222 Page 24 of 4 6 Neutron Engineering Inc. RFID Module 1309222 RV-0000000 Project No.: 1309222 Page 25 of 4 6 Neutron Engineering Inc. RFID Module 1309222 130922 2 Antenna RV-0000000 Project No.: 1309222 Page 26 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 27 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 28 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 29 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 30 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 31 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 32 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 33 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 34 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 35 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 36 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 37 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 38 of 4 6 Neutron Engineering Inc. 1309222 130922 2 RV-0000000 Project No.: 1309222 Page 39 of 4 6 Neutron Engineering Inc. 1309222 RV-0000000 Project No.: 1309222 Page 40 of 4 6 Neutron Engineering Inc. 1309222 130922 2

FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 1 of 28 Neutron Engineering Inc. Radio Test Report FCC ID: RBWESY19M-HID5121 This report concerns (check one) : Original Grant Class II Change Issued Date : Oct. 18, 2013 Project No. : 1309222 Equipment : Touch Computer Test Model Name : ESY19M1 Multiple Listing : ESY19MX (X=0-9, A-Z or blank for marketing purpose and no impact Safety related critical components and constructions) Applicant : Elo Touch Solutions, Inc. Address : 1033 McCarthy Blvd, Milpitas, CA 95035, USA Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 25, 2013 Date of Test: Sep. 25, 2013 ~ Oct. 04, 2013 Testing Engineer : (Josh Lin) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 2 of 28 Neutron Engineering Inc. Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences or generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 3 of 28 Neutron Engineering Inc. Table of Contents REPORT ISSUED HISTORY 4 1 CERTIFICATION 5 2 SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS 11 4 CONDUCTED EMISSION 12 4.1 LIMITS 12 4.2 MEASUREMENT INSTRUMENTS LIST 12 4.3 TEST PROCEDURES 13 4.4 TEST SETUP LAYOUT 13 4.5 DEVIATION FROM TEST STANDARD 13 4.6 EUT OPERATING CONDITIONS 14 4.7 TEST RESULTS 15 5 RADIATED EMISSION 17 5.1 LIMITS 17 5.2 MEASUREMENT INSTRUMENTS LIST 18 5.3 TEST PROCEDURE 18 5.4 DEVIATION FROM TEST STANDARD 19 5.5 TEST SETUP 19 5.6 EUT OPERATING CONDITIONS 20 5.7 TEST RESULTS- FCC PART 15.209 21 5.8 TEST RESULTS- FCC PART 15.225 23 6 FREQUENCY STABILITY 25 6.1 LIMITS 25 6.2 MEASUREMENT INSTRUMENTS LIST 25 6.3 TEST PROCEDURE 25 6.4 DEVIATION FROM TEST STANDARD 25 6.5 EUT OPERATING CONDITIONS 25 6.6 TEST RESULTS 26 7 EUT TEST PHOTO 27 FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 4 of 28 Neutron Engineering Inc. REPORT ISSUED HISTORY Revised Version No. Description Issued Date - Initial Issue. Oct. 18, 2013 FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 5 of 28 Neutron Engineering Inc. 1 CERTIFICATION Equipment : Touch Computer Brand Name : Elo Touch Solutions Test Model Name : ESY19M1 Multiple Listing : ESY19MX (X=0-9, A-Z or blank for marketing purpose and no impact Safety related critical components and constructions) Applicant : Elo Touch Solutions, Inc. Date of Test : Sep. 25, 2013 ~ Oct. 04, 2013 Standards : FCC Part 15, Subpart C: 2012 ANSI C63.4: 2009 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1309222) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 6 of 28 Neutron Engineering Inc. 2 SUMMARY OF TEST RESULTS Test procedures according to the technical standards: Standard Section Test Item Result 15.207 Conducted emission PASS 15.35 / 15.205 / 15.209 / 15.225 Radiated emission PASS 15.225(e) Frequency Stability PASS 15.203 Antenna Requirement PASS NOTE: 1. N/A: denotes test is not applicable in this Test Report FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 7 of 28 Neutron Engineering Inc. 2.1 TEST FACILITY The test facilities used to collect the test data in this report: Conducted emission Test: C02: (VCCI RN: C-3477; FCC RN: 614388; FCC DN: TW1054) 1F., No. 61, Ln. 77, Sing-ai Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Radiated emission Test: CB08: (FCC RN: 614388; FCC DN: TW1054; IC Assigned Code: 4428C-1) 1F., No. 61, Ln. 77, Sing-ai Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) 2.2 MEASUREMENT UNCERTAINTY The measurement uncertainty is not specified by FCC rules and for reference only. The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of…

Text truncated - open the document above for the full version.

FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 27 of 28 Neutron Engineering Inc. 7 EUT TEST PHOTO Conducted emission test photos Transmitting 1309222 1309222 FCC ID: RBWESY19M-HID5121 RV-0000000 Report No.: NEI-FCCP-1-1309222 Page 28 of 28 Neutron Engineering Inc. Radiated emission test photos Transmitting 1309222 1309222