RDI-P-88Bluetooth Speaker

used in accordance with the instructions, may cause harmful interference to radio communications. compliance could void the user's authority to operate the equipment. FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Dongguan PengQiDa Electronics Co., Ltd FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Dongguan PengQiDa Electronics Co., Ltd Address No. 27, LingXia Road, TianTouJiao Village, Qiaotou Town City Dongguan City Country China request for this certification filing under: Grantee Code Product Number FCC ID: RDI -P-88 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description √ Operational Description Operational Description.pdf explaining the functioning of the block diagram √ Block Diagrams Block Diagram.pdf showing the systematic building blocks of the EUT √ Schematics Diagrams Schematics.pdf showing components, their values and interconnection Bill of Materials List of components used on the PCB’s of the EUT Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) Dongguan City/ China 2013-04-22 Lulu Zhang Sales Manager

Figure 1 The EUT-Front View Figure 2 The EUT-Back View Figure 3 The EUT-Port View Figure 4 The EUT-Button View

Label Location On EUT

Model Name: Bluetooth Speaker Model No.: P-88 FCC ID: RDI-P-88 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Figure 5 The EUT-Inside View Figure 6 The EUT-Inside View Figure 7 PCB of the EUT-Front View Figure 8 PCB of the EUT-Back View Figure 9 PCB of the EUT-Front View

Anbotek Compliance Laboratory Limited FCC ID: RDI-P-88 Page 1 of 23 Report No. 201304761F Anbotek Compliance Laboratory Limited Tel：(86)755-26066544 Fax:(86)755-26014772 www.anbotek.com FCC TEST REPORT for Dongguan PengQiDa Electronics Co., Ltd Bluetooth Speaker Model No.: P-33, P-50, P-52, P-53, P-56, P-57, P-58, P-59, P-60, P-61, P-62, P-65, P-68, P-69, P-80, P-82, P-83, P-85, P-88, P-90, GS802 Report Number : 201304761F Date of Test : Apr. 11~22, 2013 Date of Report : Apr. 22, 2013 Prepared for : Dongguan PengQiDa Electronics Co., Ltd Address : No. 27, LingXia Road, TianTouJiao Village, Qiaotou Town, Dongguan City, Guangdong, China Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1 /Building, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26066544 Fax: (86) 755-26014772 Anbotek Compliance Laboratory Limited FCC ID: RDI-P-88 Page 2 of 23 Report No. 201304761F Anbotek Compliance Laboratory Limited Tel：(86)755-26066544 Fax:(86)755-26014772 www.anbotek.com TABLE OF CONTENTS Description Page Test Report 1. GENERAL INFORMATION ......................................................................................................... 4 1.1. Description of Device (EUT) ................................................................................................................... 4 1.2. Auxiliary Equipment Used during Test ................................................................................................... 5 1.3. Description of Test Facility ...................................................................................................................... 5 1.4. Measurement Uncertainty ........................................................................................................................ 5 2. TEST PROCEDURE ....................................................................................................................... 6 3. CONDUCTED LIMITS .................................................................................................................. 7 3.1. Block Diagram of Test Setup ................................................................................................................... 7 3.2. Power Line Conducted Emission Measurement Limits (15.207) ............................................................. 7 3.3. Configuration of EUT on Measurement ................................................................................................... 7 3.4. Operating Condition of EUT .................................................................................................................... 8 3.5. Test Procedure .......................................................................................................................................... 8 3.6. Power Line Conducted Emission Measurement Results .......................................................................... 8 4. RADIATION INTERFERENCE .................................................................................................. 11 4.1. Requirements (15.249, 15.209): ............................................................................................................. 11 4.2 Test Procedure ......................................................................................................................................... 11 4.3 Test Results .............................................................................................................................................. 12 5. OCCUPIED BANDWIDTH .......................................................................................................... 15 5.1. Requirements (15.249): .......................................................................................................................... 15 5.2. Test Procedure ........................................................................................................................................ 15 5.3. Test Configuration: ................................................................................................................................. 15 5.4. Test Results ............................................................................................................................................. 16 6. PHOTOGRAPH ............................................................................................................................. 18 6.1. Photo of Power Line Conducted Emission Measurement ...................................................................... 18 6.2. Photo of Radiation Emission Test .......................................................................................................... 18 APPENDIX I (External Photos) (2 Pages) APPENDIX II(Internal Photos) (3 Pages) Anbotek Compliance Laboratory Limited FCC ID: RDI-P-88 Page 3 of 23 Report No. 201304761F Anbotek Compliance Laboratory Limited Tel：(86)755-26066544 Fax:(86)755-26014772 www.anbotek.com TEST REPORT Applicant : Dongguan PengQiDa Electronics Co., Ltd Manufacturer : Dongguan PengQiDa Electronics Co., Ltd EUT : Bluetooth Speaker Model No. : P-33, P-50, P-52, P-53, P-56, P-57, P-58, P-59, P-60, P-61, P-62, P-65, P-68, P-69, P-80, P-82, P-83, P-85, P-88, P-90, GS802 Serial No. : N/A Rating : DC 5.0V Trade Mark : N/A Measurement Procedure Used: FCC Part15 Subpart C, Paragraph 15.207, 15.249 & 15.209 The device described above is tested by Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above t…

Text truncated - open the document above for the full version.

1. Photo of Power Line Conducted Emission Test 2. Photo of Radiated Emission Test