RDY-CP50ZRFID Pet Feeder

Personalised name tag and badges Portion Protectors Stainless steel bowl care guide Stainless steel bowls and ice packs can be bought separately from closerpets.com and are suitable for both and . Hints on food storage • Clean on the top shelf of the dishwasher • Wash with warm soapy water • Rinse and drain before placing back in feeder • Soak in warm water before cleaning • Do not use abrasive surfaces, such as steel wool pads as this will damage the surface of the bowls • Do not heat in a microwave or oven • Do not use corrosive chemicals or acid • Do not use sharp edges to cut food Follow these care tips to help prolong the durability of your stainless steel bowl and keep it looking shiny and new! Your MiBowl is designed for use with all pet foods. When using with wet food your MiBowl should always be used with its ice pack unless the surrounding temperature is less than 5°C (40°F) and ensure that the food comes from a freshly opened package or container. If the weather is very warm, you are advised not to leave wet food for long periods and may prefer to serve dry food, which has better preserving qualities. If in doubt, please consult the manufacturer of your pet’s wet food. Not only does our 304 stainless steel bowl keep food cooler for longer, but the hard wearing surface also resists trapped dirt and bacteria, preventing your pet from getting canine or feline acne. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying the RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter

US Agent Attestation Letter TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: section 2.911(d)(7) filing To whom it may concern, This letter is to confirm that Animate has accepted responsibility to act as the agent for service of process as acknowledged by the applicant, Pet Mate Ltd U.S. Agent: Animate Title: Lesa West Company Name: Animate – Pet Mate Ltd Address: 104A Longview St, Conroe, TX 77301 Telephone No: 800-725-4333 Email: [email protected] The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Signature of Applicant: Signature of U.S. Agent (if different from applicant): Name: Steve Brooks Name: Lesa West Date: 12/07/2023 Date: 12/07/2023 FRN (FCC Registration Number for applicant): 0022260822 FRN (FCC Registration Number for applicant): 0033810714

Attestation Statement -FCC Date: 15/06/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Attestation regarding ‘covered’ equipment and the Covered List FCC ID: RDY-CP50Z To whom it may concern, Per 2.911(d)(5)(i), Pet Mate Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5)(ii), Pet Mate Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Steve Brooks Cl oser Pets (Pet Mate Ltd) R&D Manager

Registered in England: 1971114VAT Registration No. GB 438 8852 02 Pet Mate Ltd. Lyon Road Hersham Surrey KT12 3PU England +44 (0)1932 700 000 [email protected] www.pet-mate.com LETTEROFAGENCY 28th November2022 PetMateLtd,LyonRoad,Hersham,SurreyKT123PU,England TestingCareOf ElementMaterialsTechnology,100FrobisherBusinessPark,Malvern,Worcestershire WR141BX,UK ToWhomIt MayConcern: Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits, pursuanttoSection5301oftheAnti-DrugAbuseACTof1988,U.S.C.862.Further,noparty,as definedin 47CFR1.2002(b),totheapplication,is subjecttodenialoffederalbenefits,that includesFCCbenefits. Thankyouforyourattentiontothismatter. Yours R&D Manager Closer Pets faithfully

Request for Confidentiality Letter-FCC Date 21/07/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request for confidentiality FCC ID: RDY-CP50Z To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459 and 0.457(d) the documents listed below and attached with this application for certification be provided with confidential status. • Schematics • Operational Description • Frequency Block Diagram • Parts List Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. Sincerely, Steve Brooks Closer Pets (Pet Mate Ltd) R&D Manager

Registered Office: Lyon Road, Hersham, Surrey KT12 3PU, EnglandRegistered in England: 1971114VAT Registration No. GB 438 8852 02 Pet Mate Ltd. Lyon Road Hersham Surrey KT12 3PU England +44 (0)1932 700 000 [email protected] www.pet-mate.com

Report on the Radio Testing For Pet Mate Ltd on MiBowl+ (CP501) Report no. TRA-059540-47-02B 03 rd August 2023 REPORT ON THE RADIO TESTING OF A Pet Mate Ltd MiBowl+ (CP501) WITH RESPECT TO SPECIFICATION FCC 47CFR 15.209 TEST DATE: 2022-09-20 to 2022-09-21 Tested by: Steven Garwell Radio Test Engineer Approved by: Daniel Winstanley Senior Radio Engineer Date: 03 rd August 2023 Disclaimers: [1] THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE [2] THE RESULTS CONTAINED IN THIS DOCUMENT RELATE ONLY TO THE ITEM(S) TESTED Report Number: TRA-059540-47-02B Issue: B Report Number: TRA-059540-47-02B Page 3 of 35 1 Revision Record Issue Number Issue Date Revision History A 9 th June 2023 Original B 03 rd August 2023 Update FCC ID page 4 and module information page 10 Report Number: TRA-059540-47-02B Page 4 of 35 2 Summary TEST REPORT NUMBER: TRA-059540-47-02B WORKS ORDER NUMBER TRA-059540-00 PURPOSE OF TEST: USA: Testing of radio frequency equipment per the relevant authorization procedure of chapter 47 of CFR (code of federal regulations) Part 2, subpart J. TEST SPECIFICATION: 47CFR 15.209 EQUIPMENT UNDER TEST (EUT): MiBowl+ (CP501) FCC IDENTIFIER: RDY-CP50Z EUT SERIAL NUMBER: Test Sample S1 MANUFACTURER/AGENT: Pet Mate Ltd ADDRESS: 7-8 Lyon Road Hersham Surrey KT12 3PU CLIENT CONTACT: Mike Sankey  07841827055  [email protected] ORDER NUMBER: 1238 TEST DATE: 2022-09-20 to 2022-09-21 TESTED BY: Steven Garwell Element Report Number: TRA-059540-47-02B Page 5 of 35 2.1 Test Summary Test Method and Description Requirement Clause 47CFR15 Applicable to this equipment Result / Note Radiated spurious emissions, below 30 MHz 15.209 PASS Radiated spurious emissions 15.209 PASS AC power line conducted emissions 15.207 Note 1 Occupied bandwidth 15.215(c) PASS Field strength of fundamental 15.209 PASS Notes: Note 1: The EUT is battery powered only. The results contained in this report relate only to the items tested, in the condition at time of test, and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Any modifications made are identified in Section 8 of this report. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 5.2 of this test report (Deviations from Test Standards). Report Number: TRA-059540-47-02B Page 6 of 35 3 Contents 1 Revision Record ......................................................................................................................................... 3 2 Summary .................................................................................................................................................... 4 2.1 Test Summary .................................................................................................................................... 5 3 Contents ..................................................................................................................................................... 6 4 Introduction ................................................................................................................................................. 7 5 Test Specifications ..................................................................................................................................... 8 5.1 Normative References ........................................................................................................................ 8 5.2 Deviations from Test Standards ......................................................................................................... 8 6 Glossary of Terms ...................................................................................................................................... 9 7 Equipment Under Test .............................................................................................................................. 10 7.1 EUT Identification ............................................................................................................................. 10 7.2 Pre-Approved Module Identification .................................................................................................. 10 7.3 System Equipment ............................................................................................................................ 10 7.4 EUT Mode of Operation .................................................................................................................... 10 7.4.1 Transmission ............................................................................................................................ 10 7.5 EUT Radio Parameters ..................................................................................................................... 10 7.5.1 General ..................................................................................................................................... 10 7.5.2 Antennas .................................................................................................................................. 10 7.6 EUT Description................................................................................................................................ 11 8 Modifications ............................................................................................................................................. 12 9 EUT Test Setup ........................................................................................................................................ 12 9.1 Block Diagram .................................................................................................................................. 12 9.2 General Set-up Photograph ........................…

Text truncated - open the document above for the full version.

CP500 MiBowl RFID Pet Feeder Pet Mate Ltd Antenna Information V1.1 Antenna: • Loop antenna • 16cm x 23cm x 10cm (When Fitted to Feeder body) • 13 turns. • 125kHz & 134kHz • Part of the hardware and non-changeable • See 500-005-rfid_fb_aerial_loom for detail unassembled

Report on the Radio Testing For Pet Mate Ltd on MiBowl+ (CP501) Report no. TRA-059540-47-02B 03 rd August 2023 REPORT ON THE RADIO TESTING OF A Pet Mate Ltd MiBowl+ (CP501) WITH RESPECT TO SPECIFICATION FCC 47CFR 15.209 TEST DATE: 2022-09-20 to 2022-09-21 Tested by: Steven Garwell Radio Test Engineer Approved by: Daniel Winstanley Senior Radio Engineer Date: 03 rd August 2023 Disclaimers: [1] THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE [2] THE RESULTS CONTAINED IN THIS DOCUMENT RELATE ONLY TO THE ITEM(S) TESTED Report Number: TRA-059540-47-02B Issue: B Report Number: TRA-059540-47-02B Page 3 of 35 1 Revision Record Issue Number Issue Date Revision History A 9 th June 2023 Original B 03 rd August 2023 Update FCC ID page 4 and module information page 10 Report Number: TRA-059540-47-02B Page 4 of 35 2 Summary TEST REPORT NUMBER: TRA-059540-47-02B WORKS ORDER NUMBER TRA-059540-00 PURPOSE OF TEST: USA: Testing of radio frequency equipment per the relevant authorization procedure of chapter 47 of CFR (code of federal regulations) Part 2, subpart J. TEST SPECIFICATION: 47CFR 15.209 EQUIPMENT UNDER TEST (EUT): MiBowl+ (CP501) FCC IDENTIFIER: RDY-CP50Z EUT SERIAL NUMBER: Test Sample S1 MANUFACTURER/AGENT: Pet Mate Ltd ADDRESS: 7-8 Lyon Road Hersham Surrey KT12 3PU CLIENT CONTACT: Mike Sankey  07841827055  [email protected] ORDER NUMBER: 1238 TEST DATE: 2022-09-20 to 2022-09-21 TESTED BY: Steven Garwell Element Report Number: TRA-059540-47-02B Page 5 of 35 2.1 Test Summary Test Method and Description Requirement Clause 47CFR15 Applicable to this equipment Result / Note Radiated spurious emissions, below 30 MHz 15.209 PASS Radiated spurious emissions 15.209 PASS AC power line conducted emissions 15.207 Note 1 Occupied bandwidth 15.215(c) PASS Field strength of fundamental 15.209 PASS Notes: Note 1: The EUT is battery powered only. The results contained in this report relate only to the items tested, in the condition at time of test, and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Any modifications made are identified in Section 8 of this report. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 5.2 of this test report (Deviations from Test Standards). Report Number: TRA-059540-47-02B Page 6 of 35 3 Contents 1 Revision Record ......................................................................................................................................... 3 2 Summary .................................................................................................................................................... 4 2.1 Test Summary .................................................................................................................................... 5 3 Contents ..................................................................................................................................................... 6 4 Introduction ................................................................................................................................................. 7 5 Test Specifications ..................................................................................................................................... 8 5.1 Normative References ........................................................................................................................ 8 5.2 Deviations from Test Standards ......................................................................................................... 8 6 Glossary of Terms ...................................................................................................................................... 9 7 Equipment Under Test .............................................................................................................................. 10 7.1 EUT Identification ............................................................................................................................. 10 7.2 Pre-Approved Module Identification .................................................................................................. 10 7.3 System Equipment ............................................................................................................................ 10 7.4 EUT Mode of Operation .................................................................................................................... 10 7.4.1 Transmission ............................................................................................................................ 10 7.5 EUT Radio Parameters ..................................................................................................................... 10 7.5.1 General ..................................................................................................................................... 10 7.5.2 Antennas .................................................................................................................................. 10 7.6 EUT Description................................................................................................................................ 11 8 Modifications ............................................................................................................................................. 12 9 EUT Test Setup ........................................................................................................................................ 12 9.1 Block Diagram .................................................................................................................................. 12 9.2 General Set-up Photograph ........................…

Text truncated - open the document above for the full version.