RE7-AP822EV2Dual Radio Access Point

Meru Networks AP822 Installation Guide 882-70018 Rev A September 2014 Copyright © Meru Networks, Inc., 2003–2014. All rights reserved. Other names and brands may be claimed as the property of other iii MERU NETWORKS, INC. Limited Product Warranty This Limited Product Warranty applies to the original end-user customer of the Meru product which you purchased for your own use, and not for resale (“Product”), from Meru Networks, Inc. (“Meru”) or its authorized reseller (“Reseller”). Limited Warranties •One-year limited hardware warranty: Meru warrants to you that Meru hardware (other than Third Party Products as described below) will be free from defects in materials and work- manship for a one-year period after the date of delivery of the applicable product to you from Meru or its Reseller (the “Hardware Warranty Period”). If Meru receives written notice from you of such defects during the Hardware Warranty Period, Meru will, at its option, either repair or replace Meru hardware that Meru determines to be defective. Replacement products may be remanufactured units, and will be warranted for the remainder of the origi- nal Hardware Warranty Period, or if greater, for thirty days from delivery of such replace- ment. Should Meru be unable to repair or replace the Meru hardware, Meru (or its Reseller, as applicable) will refund to you the purchase price of the Product. •90-Day Limited Software Warranty: Meru warrants to you that, for a 90-day period after the date of delivery of the applicable product to you from Meru or its Reseller (the “Software Warranty Period”), when properly installed and used, (a) the media on which the Meru soft- ware is provided will be free from defects in materials or workmanship; and (b) the Meru software will substantially conform to the functional specifications in the applicable docu- mentation. If Meru receives written notice from you of a breach of this warranty during the Software Warranty Period and is able to reproduce the defect, Meru will, at its option, either repair or replace the defective Meru software. Should Meru be unable to repair or replace the Meru software, Meru (or its Reseller, as applicable) will refund to you the purchase price of the Product. Exclusions The warranty on the Product shall not apply to defects resulting from the following: iv •Alteration or modification of the Product in any way, including without limitation configura- tion with software or components other than those supplied by Meru or integration with parts other than those supplied by Meru. •Abuse, damage or otherwise being subjected to problems caused by negligence or misap- plication (including without limitation improper or inadequate maintenance or calibration), relocation of the products (including without limitation damage caused by use of other than Meru shipping containers), or use of the products other than as specified in the applicable Meru product documentation (including without limitation incompatible operating environ- ments and systems), or improper site preparation or maintenance. •Damage as a result of accidents, extreme power surge, extreme electromagnetic field, acts of nature or other causes beyond the control of Meru. •Use of the Product with software, interfacing, parts or supplies not supplied by Meru. The warranty on the Product does not apply if the Product is sold, or in the case of software, licensed, for free for evaluation or demonstration purposes. Meru expressly disclaims any warranty or obligation to support the Product for all operating environments – for example, as illustration and not limitation, Meru does not warrant or ensure interoperability of the Product with future telecommunication systems or other future software or hardware. You understand and acknowledge that the Products may generate, use or radiate radio fre- quency energy and may interfere with radio communications and/or radio and television receptions if is not used and/or installed in accordance with the documentation for such prod- ucts. WHILE MERU USES COMMERCIALLY REASONABLE EFFORTS TO ENSURE COM- PLIANCE OF THE PRODUCTS WITH APPLICABLE UNITED STATES FEDERAL COMMUNICATIONS COMMISSION AND PROTECT AGAINST HARMFUL INTERFER- ENCES, YOU ACKNOWLEDGE AND AGREE THAT INTERFERENCES WITH RADIO COM- MUNICATIONS AND/OR RADIO AND TELEVISION RECEPTIONS MAY OCCUR AND THAT MERU WILL NOT BE LIABLE FOR ANY DAMAGES OR INCONVENIENCE BASED ON SUCH INTERFERENCES. Third Party Products - The above Limited Warranties are exclusive of products manufac- tured by third parties (“Third Party Products”). If such third party manufacturer provides a sep- arate warranty with respect to the Third Party Product, Meru will include such warranty in the packaging of the Meru Product. Return procedures To obtain warranty service you must: (a) obtain a return materials authorization number (“RMA#”) from Meru by contacting [email protected], and (b) deliver the Prod- uct, in accordance with the instructions provided by Meru, along with proof of purchase in the form of a copy of the bill of sale including the Product’s serial number, contact information, RMA# and detailed description of the defect, in either its original package or packaging provid- ing the Product with a degree of protection equivalent to that of the original packaging, to Meru v at the address below. You agree to obtain adequate insurance to cover loss or damage to the Product during shipment. If you obtain an RMA# and return the defective Product as described above, Meru will pay the cost of returning the Product to Meru. Otherwise, you agree to bear such cost, and prior to receipt by Meru, you assume risk of any loss or damage to the Product. Meru is responsible for the cost of return shipment to you if the Meru Product is defective. Returned products which are found by Meru to be not defective, returned out-of-warranty or otherwise ineligible for warranty service will be repaired or replaced at Meru’s standard charges and shipped …

Text truncated - open the document above for the full version.

1 DO NOT SCALE THIS DRAWING ±.010 ±.05 ±1.5° 3 PLCS 2 PLCS ANG UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES C2/A1R DWG SIZE REV/REL SHEET USE PURSUANT TO COMPANY INSTRUCTIONS THIRD ANGLE PROJECTION P TITLE DESCRIPTION DATE REV DRAWING NUMBER PROE FILE NAME HS 08/20/14 MERU NETWORKS PROPRIETARY 845-00826 2 1 6/1/14 Initial release to Design SCALE 1:1 102 mm x 15.5 mm NOTES: UNLESS OTHERWISE SPECIFIED) 1. MUST CONFORM TO UL969 MARKING & LABELING SYSTEM PGDQ2; VAL-THERM-D OR EQUIVALENT. 2. ALL TEXT AND GRAPHICS ARE BLACK.3. CE, GITEKI & KOREAN MARK HAVE MINIMUM HEIGHT OF 5mm.4. The diameter of the C-Tick mark has a minimum requirement of 3mm and the suppliers identification characters have a minimum height requirement of 1mm5. For UAE mark, “TRA” min height 3mm, all other characters min height 2mm6. For So. Africa mark, the ICASA logo min requirement is 3 x 3 mm7. Factory Code: Shanghai = “S”, Shenzhen = “SZ” IC: 6749A-AP822EV2 FCC ID: RE7-AP822EV2 MADE IN CHINA E239453 SZ I.T.E. ACCESSORY 0980 Meru Networks Dual Radio Access PointModel No. AP822e V2 Powered by PoE: -48 V 750 mAPowered by AC Adapter: 12 V 2.0A V 7 V 2 N1092 Label, Regulatory 1, AP822e V2 10 2 8/20/14 Release to MVT

SOCAA CORP.,LTD. ( Solution Of Connector & Antenna) C IVORY ༟ጤ NOTE : 2/Gsfr!;!3/5ɴ3/6HI{!'!5/:6/936HI{ 2.Gain : 2.4~2.5 GHz 3 dBi 4.9~5.825 GHz 4 dBi 3.SWR : 2 Max 4.Pattern : Omni 5.Flammability Class : UL-94 HB 3/5H!'!6/9H!4eCj!Ϻጕ

10301019天線 2.4~2.5 GHz&4.9~5.85 GHz場型報告 測試條件:單支天線,如附圖 頻率 增益值 2.4GHz 3.5 2.45GHz 3.32 2.5GHz 3.48 4.9GHz 4.3 5.0GHz 3.12 5.1GHz 3.44 5.2GHz 3.87 5.3GHz 3.12 5.4GHz 3.55 5.5GHz 3.67 5.6GHz 3.92 5.7GHz 4.21 5.8GHz 3.72 5.85GHz 3.6 2.4GHz 2.5GHz 4.9GHz 5.7GHz 結論: 1.10301019天線之圖面標示，頻寬為:2.4-2.5 GHz增益值3.0 dBi及頻4.9-5.825GHz 增益值4.0 dBi。 10301019A.pdf 2.由上表測試數據確認，其增益值是符合圖面需求的。 3.實測測試儀器較正差為±0.5 dB。

TerraWave Solutions® 802.11n 2.4/5 GHz 6 dBi Outdoor MIMO Omnidirectional Antenna with RPSMA Plug Connectors TerraWave’s 6 dBi outdoor multiple-input and multiple-output (MIMO) omnidirectional antenna is designed to operate enterprise class 802.11n MIMO access points. With dual-band leads, each of the four cables support both 2.4 and 5 GHz, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. The rugged enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast and or wall mounting. Industrial beam clamps are available as an additional option. Every TerraWave antenna is covered by the Company’s two-year TerraNet warranty program. For questions and to purchase product, contact a wireless networking solutions sales engineer at 210-375-8482, 800-851-4965 or [email protected]. Visit www.terrawave.com for additional information. Specifications Model M6060060MO1D43620 Frequency Range 2400~2500 / 5150~5850 MHz Bandwidth 100 / 700 MHz Gain 6 dBi Vertical Beamwidth 45°/20° Horizontal Beamwidth 360° VSWR ≤2.0 / ≤2.2 Nominal Impedance 50 Ohms Polarization Vertical Isolation ≤-15dB Max Power 10W Lightning Protection Not DC Grounded Connector RPSMA Plug with 36” Cable Dimensions 5.9” x 7” Weight 2.64 lbs Mast Mount Diameter 1.37”-1.97” Operating Temperature Range -40°F to +158°F Wind Load 134 mph www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216 TerraWave Solutions® 802.11n 2.4/5 GHz 6 dBi Outdoor MIMO Omnidirectional Antenna with RPSMA Plug Connectors Mounting Information for M6060060MO1D43620 www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216 6.99” 10.39” 5.94” 6.34” 3.94”

ANTENNA Product overview The ANT-O6ABGN-0607-PT is a dual-band, three-patch antenna for use in 802.11n MIMO applications. Housed in a low-profile radome, the antenna can be mounted to a wall or mast, indoors or outdoors. Each of the three MIMO antenna elements is connected to the Meru AP300, AP433e, AP1010e/AP1020e Access Points via a low-loss, plenum-rated, coax pigtail. The radiation patterns are uniform and symmetrical, providing high levels of signal density into defined coverage zones. This antenna will greatly enhance the performance of 802.11n systems. The dual-band frequency coverage means that a single type of antenna can be deployed with any MIMO radio in the 2.4–2.5 GHz or 5.1–5.850 GHz bands. | MeruNetworKS.coM | ANteNNA ANt-o6ABGN-0607-Pt ExTErNAl MIMO PATch ANTENNA ANT-O6ABGN-0607-PT Flexible Wall/Mast Mount Installation, Low Profile, and Directional H Plane 2.4 GHzH Plane 5 GHz e Plane 2.4 GHz e Plane 5 GHz For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 e [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1030 ANTENNA Maximum Input Power 50 watts Mechanical Size 17 1/2” x 6 1/64” x 1” (44.5 cm x 15.3 cm x 2.5 cm) Weight 1.9 lbs (0.86 kgs) Antenna connection RPSMA Mount Style Articulating for wall/mast cable length 3 ft Frequency range 2.4–2.5 GHz and 5.1–5.850 GHz Gain 6 dBi for 2.4–2.5 GHz 7 dBi for 4.9–5.850 GHz Maximum VSWr 1.5:1 for 2.4 GHz; 2.0:1 for 5 GHz 3 dB Beamwidth Elevation 72º @ 2.4 GHz, 60º @ 5 GHz 3 dB Beamwidth Azimuth 82º @ 2.4 GHz, 75º @ 5 GHz Polarization Vertical Number of leads 6 certiFicAtioNS Certified in U.S. and Canada. For other regions, contact your local Meru representative. Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPEcIFIcATIONS

ANTENNA Product overview This aesthetically pleasing antenna features six integrated 2.4 and 5 GHz dual- band, omni-directional antennas, ideal for demanding 802.11n applications. | MeruNetworKS.coM | ANteNNA ANt-6ABGN-24 DuAl-bAND miNi mimO cEiliNg- mOuNT OmNi-DirEcTiONAl ANTENNA ANT-6AbgN-24 An aesthetically pleasing antenna to support demanding 802.11n applications For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 e [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1025 ANTENNA eNviroNMeNtAL & MecHANicAL coNSiderAtioNS Temperature -22° F to +158° F (-30° C to +70° C) Weight 0.68 lbs (0.31 kgs) Dimensions 7.1” x 5.1” x 1.9” (18 cm x 13 cm x 5 cm) cable 36” (91.5 cm) plenum mounting Style Ceiling connector Type RP SMA plug eLectricAL SPeciFicAtioNS Frequency range 2.4–2.483 GHz 5.15–5.85 GHz gain 2.5 dBi 4 dBi VPbW/Vertical 55° 60° HPbW/Horizontal 360° VSWr 2.0 max 2.5 max Polarization Vertical impedance 50 Ohms PArt NuMBerS ANT-6ABGN-24 Dual-band Mini MIMO Ceiling-mount Omni-directional Antenna for 2.4/5.0/5.2/5.6/5.8 GHz meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPEciFicATiONS

Ceiling Mount Omnidirectional Antenna for Indoor Use External Ceiling Mount Indoor Antenna For more information about the Meru Antennas, visit www.merunetworks.com ANT-I3ABGN-0304-O The ANT-I3ABGN-0304-O is a dual-band, ceiling-mount omnidirectional antenna, designed to operate indoors. The dual-band frequency coverage means that a single type of antenna can be deployed with any radio in the 2.4–2.5 GHz or 5.1–5.850 GHz bands. The 18” plenum pigtails have dual-band leads that support both 2.4 and 5 GHz with RPSMA connectors. E-Plane Pattern E-Plane Pattern H-Plane Pattern H-Plane Pattern 2.4 GHz 5 GHz Frequency Range 2.4–2.5 GHz and 5.1–5.850 GHz Gain 3 dBi for 2.4–2.5 GHz 4 dBi for 5.1–5.850 GHz VSWR ≤2.0 Vertical Beamwidth 90°/160° Horizontal Beamwidth 360° Polarization Vertical Number of Leads 3 Maximum Input Power 2 watts Lightning Protection DC grounded Mechanical Size 5.9” x 2.9” x 1.0” (15 cm x 7.37 cm x 2.54 cm) Weight 1.55 lbs (0.703 Kg) Operating Temperature Range -40 °F to 158 °F / -40 °C to 70 °C Antenna Connection RPSMA plug Mount Style Ceiling mount Cable Length 18” plenum pigtails Standard Warranty 1 year Part Numbers ANT-I3ABGN-0304-O Dual-band, Omnidirectional External Antenna for 2.4/5.0/5.2/5.6/5.8 GHz Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. Corporate Headquarters 894 Ross Drive, Sunnyvale, CA 94089 T +1.408.215.5300 F +1.408.215.5301 E [email protected] For more information about Meru antennas, visit www.merunetworks.com or email your questions to: [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 04.12 DS1052.1 ANT-I3ABGN-0304-O TECHNICAL SPECIFICATIONS Ceiling Mounting Images

ANTENNA H Plane 2.5 GHzH Plane 5.47 GHz E Plane 2.5 GHzE Plane 5.47 GHz Product ovErviEw The ANT-ABGN-23 is a dual-band, three-element omni-directional antenna for use in 802.11n MIMO applications. Housed in a compact, low-profile PVC/acrylic radome, the antenna can be mounted to a variety of drop ceiling grids using the integrated spring clips. It can also be mounted to a flush surface via the four mounting holes. Each of the three MIMO antenna elements is connected to the Meru AP300 Access Point via a low-loss, plenum-rated, coax pigtail. The radiation patterns are uniform and symmetrical, providing high levels of signal density into defined coverage zones. This antenna will greatly enhance the performance of 802.11n systems. The dual-band frequency coverage means that a single type of antenna can be deployed with any MIMO radio in the 2.4–2.5 GHz or 4.9–5.9 GHz bands. | MEruNEtworKS.coM | ANtENNA ANt-ABGN-23 ExTErNAl MIMO ANTENNA ANT-ABGN-23 Wall/Ceiling Grid Mounted, Low Profile, and Omni-directional For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 E [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1026 ANTENNA 89.0 22.0 308.2 89.0 93.2 Mechanical Size 12 1/8” x 7/8” x 3 11/16” (30.8 cm x 2.2 cm x 9.4 cm) Weight 0.86 lb (0.39 kg) Antenna Connection Reverse SMA (3x) radome PVC/Acrylic Mount Style Ceiling grid/suspended tile Cable length 5 ft Frequency range 2.4–2.5 GHz and 4.9–5.9 GHz Gain 3.0 dBi for 2.4–2.5 GHz 4.0 dBi for 4.9–5.9 GHz Maximum VSWr 2.0:1 3dB Beamwidth Elevation 60º 3dB Beamwidth Azimuth Omni-directional Polarization Linear, vertical Maximum Input Power 2 watts Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPECIFICATIONS

ANTENNA Product overview This compact antenna ships by default with the Meru AP300, AP433, AP1010e, and AP1020e Access Points. The antenna is designed for indoor applications and can also be ordered for use with other Meru access points. The antenna is white and has a low profile. It supports both the 2.4 GHz and the 5.0 GHz spectrums. | MeruNetworKS.coM | ANteNNA ANt-ABGN23o-w DUAL-BAND, OMNI- DIRECTIONAL ANTENNA ANT-ABGN23O-W Compact, white, low-profile antenna designed for indoor applications For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 e [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1027 ANTENNA eNviroNMeNtAL & MecHANicAL coNSiderAtioNS Temperature -10° C to + 55° C (14° F to 131° F) Humidity 95% at 25° C (77° F) Radome Color Off-white Dimensions 5.15” x 0.7” (13.1 cm x 1.8 cm) Connector Type RP SMA plug Frequency Range 2.4–2.5 GHz 4.9–5.875 GHz Gain 2 dBi HPBW/Horizontal 360° VSWR 1.5:1 max Polarization Linear, vertical Impedance 50 Ohms PArt NuMBer ANT-ABGN23O-W Dual-band, Omni-directional Antenna for 2.4/5.0/5.2/5.6/5.8 GHz Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPECIFICATIONS

ANTENNA Product overview This is a compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the 2.45 GHz and 5.8 GHz bands. The antenna features a tilt-and- swivel joint that allows it to be oriented at straight or right angles to the access point or to be conveniently folded for storage. The antenna offers higher gain compared to the default antennas on Meru access points. The antenna is ideal for indoor usage and helps increase the coverage and range of the wireless signal. | MeruNetworKS.coM | ANteNNA ANt-ABGN470 DuAl-bAND, omNi-DirEcTioNAl, high-gAiN ANTENNA ANT-AbgN470 Compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the 2.45 GHz and 5.8 GHz bands E Plane 2.4 GHzH Plane 5.8 GHz H Plane 5.8 GHzH Plane 2.4 GHz -35.0 45.0 -25.0 -15.0 -5.0 5.0 0 180 27090 -35.0 45.0 -25.0 -15.0 -5.0 5.0 0 180 27090 -35.0 45.0 -25.0 -15.0 -5.0 5.0 0 180 27090 -40.0 -50.0 -30.0 -20.0 -10.0 0.0 0 180 27090 For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 e [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1028 ANTENNA eNviroNMeNtAL & MecHANicAL coNSiderAtioNS Temperature -10° C to +55° C (14° F to 131° F) humidity 95% at 25° C (77° F) radome color Black radome material ABS Dimensions 4” x 0.5” (10.2 cm x 1.3 cm) connector type RP SMA plug eLectricAL SPeciFicAtioNS Frequency range 2.4–2.5 GHz gain 4.7 dBi hPbW/horizontal 360° VSWr 1.9:1 max Polarization Linear, vertical impedance 50 Ohms PArt NuMBer ANT-AbgN47o Dual-band, omni-directional antenna for 2.4 and 5.8 GHz meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPEciFicATioNS

Ceiling Mount Omnidirectional Antenna for Indoor Use External Ceiling Mount Indoor Antenna For more information about the Meru Antennas, visit www.merunetworks.com ANT-I2ABGN-0304-O H Plane 2.4 GHzE Plane 2.4 GHz E Plane 5 GHzH Plane 5 GHz The ANT-I2ABGN-0304-O is a dual-band, ceiling-mount omnidirectional antenna, designed to operate indoors. The dual-band frequency coverage means that a single type of antenna can be deployed with any radio in the 2.4–2.5 GHz or 5.1–5.850 GHz bands. The 36” cables have dual-band leads that support both 2.4 and 5 GHz with RPSMA connectors. Frequency Range 2.4–2.5 GHz and 5.1–5.850 GHz Gain 3 dBi for 2.4–2.5 GHz 4 dBi for 5.1–5.850 GHz VSWR ≤2.0 Vertical Beamwidth 100°/100° Horizontal Beamwidth 360° Polarization Vertical Number of Leads 2 Maximum Input Power 2 watts Lightning Protection DC grounded Mechanical Size 2.9” x 5.41” x 1” (7.37 cm x 13.7 cm x 2.5 cm) Weight 0.39 lbs (0.177 kgs) Operating Temperature Range -40 °F to 158 °F / -40 °C to 70 °C Antenna Connection RPSMA plug with 3 ft cable Mount Style Ceiling mount Cable Length 3 ft Standard Warranty 1 year Part Numbers ANT-I2ABGN-0304-O Dual-band, Omnidirectional External Antenna for 2.4/5.0/5.2/5.6/5.8 GHz Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. Corporate Headquarters 894 Ross Drive, Sunnyvale, CA 94089 T +1.408.215.5300 F +1.408.215.5301 E [email protected] For more information about Meru antennas, visit www.merunetworks.com or email your questions to: [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 04.12 DS1052 ANT-I2ABGN-0304-O TECHNICAL SPECIFICATIONS Ceiling mounting images

External Patch Antenna Flexible Wall/Mast Mount Installation, Low Profile, and Directional For more information about the Meru Antennas, visit www.merunetworks.com ANT-O4ABGN-0607-PT The ANT-O4ABGN-0607-PT is a dual-band, dual-diversity patch antenna. It features two integrated 2.4 GHz, 6 dBi elements and two 5.1–5.85 GHz, 7 dBi elements arranged in one enclosure. The antenna can be mounted to a wall or mast, indoors or outdoors. Each of the two diversity antenna elements is connected to the access points via RPSMA plug connectors. The radiation patterns are uniform and symmetrical, providing high levels of signal density into defined coverage zones. The dual-band frequency coverage means that a single type of antenna can be deployed with any radio in the 2.4–2.5 GHz or 5.1–5.850 GHz bands. E Plane 5 GHzE Plane 2.4 GHz H Plane 2.4 GHzH Plane 5 GHz Frequency Range 2.4–2.5 GHz and 5.1–5.850 GHz Gain 6 dBi for 2.4–2.5 GHz 7 dBi for 5.1–5.850 GHz VSWR ≤1.5/≤2.0 Nominal Impedance 50 Ohms Beamwidth Elevation 72º at 2.4 GHz, 60º at 5 GHz Beamwidth Azimuth 82º at 2.4 GHz, 75º at 5 GHz Polarization Vertical Number of Leads 4 Maximum Input Power 50 watts Mechanical Size 12.6” x 6.1” x 1” (32 cm x 15.5 cm x 2.5 cm) Weight 1.4 lbs (0.64 kgs) Operating Temperature Range -22 °F to 158 °F / -30 °C to 70 °C Antenna Connection RPSMA plug with 3 ft cable Mount Style Articulating for wall/mast Cable Length 3 ft Standard Warranty 1 year Part Numbers ANT-O4ABGN-0607-PT Dual-band, Dual-diversity Patch Antenna for 2.4/5.0/5.2/5.6/5.8 GHz Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. Corporate Headquarters 894 Ross Drive, Sunnyvale, CA 94089 T +1.408.215.5300 F +1.408.215.5301 E [email protected] For more information about Meru antennas, visit www.merunetworks.com or email your questions to: [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 04.12 DS1051 ANT-O4ABGN-0607-PT TECHNICAL SPECIFICATIONS

ANTENNA Product overview The ANT-O6ABGN-0606-O is an outdoor dual-band, six-element omni- directional antenna for use in 802.11n MIMO applications. Housed in a ruggedized fiberglass enclosure, the antenna can be mounted to a wall, beam, or mast. Each of the six MIMO antenna elements is connected to the Meru AP300 or OAP433 Access Point via a low-loss, plenum-rated, coax pigtail. The radiation patterns are uniform and symmetrical, providing high levels of signal density into wide spaces such as warehouses or manufacturing facilities. This antenna will greatly enhance the performance of 802.11n systems. The dual-band frequency coverage means that a single type of antenna can be deployed with any MIMO radio in the 2.4–2.5 GHz or 5.150–5.850 GHz bands. | MeruNetworKS.coM | ANteNNA ANt-o6ABGN-0606-o EXTERNAL MIMO OMNI-DIRECTIONAL ANTENNA ANT-O6ABGN-0606-O Flexible wall/beam/mast mount installation, ruggedized, and omni-directional e Plane 2.4 GHz e Plane 5 GHz H Plane 5 GHzH Plane 2.4 GHz For more information about Meru antennas, visit | www.merunetworks.com | Or email your questions to: [email protected] corporate Headquarters 894 ross drive Sunnyvale, cA 94089 t +1 (408) 215-5300 F +1 (408) 215-5301 e [email protected] Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 03.12 DS1029 ANTENNA Maximum Input Power 20 watts Mechanical Size 6” x 7 1/64” (152.4 mm x 180.4 mm) Weight 3.74 lb (1.70 kg) Antenna Connection RPSMA Radome Fiberglass Mount Style Attaches to wall/beam/mast with included hardware Cable Length 3 ft Frequency Range 2.4–2.5 GHz and 5.150–5.850 GHz Gain 6 dBi for 2.4–2.5 GHz 6 dBi for 5.150–5.850 GHz Maximum VSWR 1.5:1 for 2.4 GHz; 2.0:1 for 5 GHz Beamwidth Elevation 40º @ 2.4 GHz, 40º @ 5 GHz Beamwidth Azimuth 360º @ 2.4 GHz, 360º @ 5 GHz Polarization Vertical Number of Leads 6 certiFicAtioNS Certified in U.S. and Canada. For other regions, contact your local Meru representative. Meru delivers an all-wireless network that fully supports the enterprise, delivering a consistent, interactive experience for all users. No matter what applications they are running. No matter how many other users are on the network. SPECIFICATIONS

§ 15.407(f) RF Exposure RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit Calculation: EUT’s operating frequencies @ 5150-5250 MHz; Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 Equation from page 18 of OET 65, Edition 97-01 S = PG / 4πR2 or R = √PG / 4πS where, S = Power Density P = Power Input to antenna (293 mW) G = Antenna Gain 9dBi (7.94 linear) R = Minimum Distance between User and Antenna (25cm) S = (293 *7.94)/(4*3.14*625 ) = 0.296 mW/cm2 Since S < 1 mW/cm2 , the minimum distance (R) is 25cm Co-location: Frequency Range MPE Result (mW/cm 2 ) Limit …

Text truncated - open the document above for the full version.