REP-2200-1HotClient Customer Premises Equipment, Model 2200

HotClient Manual Revision 1.0 011108 The contents of this Installation Guide are subject to change without notice. Please refer to the Firetide partners web site, partners.firetide.com, for current versions. Hardware Installation Guide HotClient 2100 / 2200 Customer Premises Equipment Model 2100 Indoor CPEModel 2200 Outdoor CPE 2 CPE Hardware Guide December 2007 Firetide Limited End User Product Warranty Pursuant to all provisions described herein, Firetide hardware products and Firetide antennas are warranted for one (1) year from the date of purchase against defects in the build materials and workmanship. Firetide does not warrant that the Products will meet any requirements or specifications of any End User Customer. This warranty applies to the entire Firetide product, including the AC power adapter. Pursuant to all provisions described herein, Firetide software products are warranted for ninety (90) days from the date of purchase against defects in the build materials and workmanship. Firetide also warrants that the Software will materially conform to the documentation supplied by Firetide with the Software. In the event that the Software fails to materially conform to the documentation and an authorized Firetide reseller is noti- fied in writing of such failure within the warranty period, Firetide or its reseller shall use commercially reason- able efforts to promptly correct the nonconformity. Firetide does not warrant that the use of the Software will be uninterrupted or error free. The above warranties are void if the alleged defect cannot be verified by Firetide or if, as determined by Firetide, the product failure was due to tampering, abuse, misuse, accident, shipping, handling, or storage; or if the product has been installed, used, or maintained in a manner not described in the product user manual; or if the product has been altered in any way; or if product serialization has been altered. Any attempt to disassemble or repair the product by anyone other than Firetide immediately voids this warranty. This warranty applies only to the original End User purchaser of the product and may not be transferred to any other individual or entity. THE FOREGOING ARE THE EXCLUSIVE WARRANTIES APPLICABLE TO THE PRODUCT INCLUDING THE SOFTWARE, AND THE EXCLUSIVE REMEDY FOR DEFECTS IN THE PRODUCT. FIRETIDE DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRAN- TIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO TO THAT EXTENT THIS LIMITATION MAY NOT APPLY TO YOU. In no event will Firetide be liable for any special, incidental, consequential, punitive or indirect damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of informa- tion, or other pecuniary loss) arising out of the use or inability to use the product or the performance, inter- ruption or failure of the product, irrespective of the cause of action, even if Firetide has been advised of the possibility of such damages. Firetide’s cumulative liability for all claims arising out of or in connection with this warranty will not exceed the amount paid by the original End User purchaser to purchase the product. The amounts payable for the product are based in part on these limitations and these limitations shall apply notwithstanding the failure of essential purpose of any remedy. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so to that extent the above limitations or exclusions may not apply to you. By using the product the original End User purchaser agrees to and is bound by these terms and conditions. In the event that a product fails to meet this warranty and Firetide’s authorized reseller is notified in writing of such failure within the warranty period, Firetide shall, at its own discretion, either repair the product or re- place it with the same or a functionally-equivalent product free of charge. Replacement products may contain refurbished materials in whole or in part. Firetide will honor this warranty provided the product is returned through an authorized Firetide reseller or dealer with shipping charges prepaid, along with a proof of purchase describing the original purchase date and product serial numbers if applicable. The authorized reseller must acquire a Return Materials Authorization (RMA) number from Firetide prior to returning any product. Firetide does not accept shipments of defective products without shipping charges prepaid. Copyright Notice: ©2003-2007 Firetide, Inc. All rights reserved. Trademarks: Firetide, the Firetide logo, Instant Mesh Networks, HotPort, HotPoint, and HotClient are trademarks of Firetide, Inc. All other trademarks are the property of their respective owners. Firetide, Inc. 16795 Lark Avenue, Suite 200 Los Gatos, CA 95032 USA Please contact your Firetide dealer for instructions on returning defective or damaged products for repair or replacement. Do not return products to Firetide, Inc. Please keep all original packaging materials in the event they are needed to return the product for servicing. Firetide Instant Mesh Networks 3 December 2007 Chapter 1. Setting Up Your Equipment Introduction The Firetide Model 2100 and 2200 HotClient Customer Premises Equipment (CPE) provide connec- tivity to the Internet without the need for cable, DSL, or other wired connection. The HotClient uses a radio connection to provide Ethernet-equivalent connectivity in your home or business. You connect to the HotClient via a wired Ethernet connection. You can connect a single computer or multiple devices on a LAN. You can also connect an 802.11 a/b/g/n access device, if desired. Unpacking and Setup - Indoor Setup of your new Firetide HotClient is simple. The package contents are shown in Figure 1. Your HotClient needs power. Note that the AC adapter ha…

Text truncated - open the document above for the full version.

www.firetide.com 16795 Lark Avenue, Los Gatos, CA 95032, Tel: 408-399-7771, Fax: 408-317-1777 March 12, 2008 Reviewing Engineer MET Laboratories, Inc. 914 W. Patapsco Ave. Baltimore, MD 21230 Re: CONFIDENTIALITY REQUEST FOR HOTCLIENT 2200 FCC ID # REP-2200-1 To Whom It May Concern: This letter serves as an official request for confidentiality under FCC Rule Section 0.459. We have requested that the schematic diagrams, parts list/bill of materials (BOM), and block diagram required to be submitted with this application be withheld from public review. The documents are company proprietary information and should not be distributed to the public or posted on the FCC’s OET website. Please contact me if there is any information you may need. Paul Richards Director of Hardware Engineering Firetide Inc. 16795 Lark Ave. Suite 200 Los Gatos, CA 95032

Label Material: Mylar, white 76 mm 76 mm All text and symbols - PMS Black 1 mm radius corners This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Customer Premises Equipment Input Power: 48 VDC POE, 0.25 A Made in China Warranty Void if Opened Firetide HotClient 2200 FCC ID: REP-2200-1 IC ID: 4988A-2200 Serial Number Radio MAC Address C C 0980 Firetide HotClient 2200 Outdoor CPE Regulatory Label 12-13-07 Part Number 130-0063-001 Rev. 1 Apply Separate Bar Code Label (2 places) V H Antenna Polarity

Firetide Model 2200 Theory of Operation The 2200 Series HotClient Customer Premises Equipment (CPE) is comprised of two printed circuit assemblies; a Support Board and a Radio. The boards are connected together via a 2 x 10 pin connector and are mounted inside a cast aluminum enclosure. The HotClient CPE is powered by POE using an external AC/DC wall adapter (48V out, 0.35 A rating). The Support Board accepts the 48 VDC input through a RJ-45 connector. The Support Board converts the the 48 VDC into the supply voltages used by the the Radio Card (3.3 and 5.0 VDC) and internal circuitry (8.0 VDC). The support board also contains three LED’s that indicate in the unit is powered and two SW controlled LED’s that are used to display unit status and relative RSSI. The Radio Card runs from 3.3 and 5.0 volts, which is provided by the Support Board. The output TX stage of the radio is powered from +5.0 VDC and has a supply current of 350 mA. The 2100 series uses a Firetide proprietary radio card design, which incorporates an Atheros Communications chipset. The Radio operates from 2412 MHz to 2462 MHz according to the IEEE 802.11b/g specification. The data rates supported are 1 Mbit (DBPSK), 2 Mbit (DQPSK), 5.5 Mbit (CCK), and 11 Mbit (CCK) for .11b and 6, 9, 12, 18, 24, 36, and 54 MBit OFDM for .11a/g. The HotClient uses and external 8 dBi omni directional antenna or a 13 dBi patch antenna. Only proprietary software written and distributed by Firetide Inc. can be installed on the HotClient CPE. “Source code” is controlled solely by Firetide Inc and is not distributed to end users.

Item Page 1.1 2.2 3.3~4 4.5~6 5.7~8 成品圖 .................. Contents Description .................................... 天線規格表 .................. .................. .................. Cable規格 .................. .................. 測試報告 .................. Connector材質特性 .................. SPECIFICATION 1. Electrical Specification 1.1 Frequency Range : 2.4 ~ 2.5GHz 1.2 Peak Gain: 11dBi typ. 1.3 VSWR: 2:1 max. 1.4 HPBW/H: 67 шtyp.ˁ 1.5 HPBW/E: 32 шtyp. 1.6 Impedance: 50 Ө 1.7 Polarization: Linear; Vertical 1.8 Power Handling: 10 W 1.9 Connector: RA MMCX Plug 1.10 Extended Cable RG-316, L=150 mm. 2. Mechanical Specification 2.1 Operating Temperature: -30 к~+80к 2.2 Storage Temperature: -40 к~+85к 2.3 Humidity: 90% RH 2.4 Reflecting Plate Material: Alu 6061 T1.6mm 2.5 Dimension(WxLxH): 172.2 x 182.2 x 7.5 (mm) 2.6 Weight: 165 gf 1 2 C841-540029-A VSWR & Return Loss 3 E Plane Co-Polarization Patterns -30 -25 -20 -15 -10 -5 0 5 10 15 0 30 60 90 120 150 180 210 240 270 300 330 -30 -25 -20 -15 -10 -5 0 5 10 15 2.4 GHz 2.45GHz 2.5 GHz H Plane Co-Polarization Patterns -30 -25 -20 -15 -10 -5 0 5 10 15 0 30 60 90 120 150 180 210 240 270 300 330 -30 -25 -20 -15 -10 -5 0 5 10 15 2.4 GHz 2.45GHz 2.5 GHz 4 5 6 7 8

C841-590014-A SPECIFICATION 1. Electrical Specification 1.1 Frequency Range : 2.3 ~ 2.7GHz 1.2 Peak Gain: 13 (dBi) typ. 1.3 VSWR: 1.7 : 1 max. 1.4 HPBW/H: 34 ∘typ. 1.5 HPBW/E: 33 ∘typ. 1.6 Impedance: 50 1.7 Polarization: Linear; Vertical 1.8 Power Handling: 10 W 1.9 Connector: RA MMCX Plug 1.10 Extended Cable RG-316, 150 mm. 2. Mechanical Specification 2.1 Operating Temperature: -30 ~+80 2.2 Storage Temperature: -40 ~+85 2.3 Humidity: 95% RH 2.5 Reflecting Plate Material: Alu 6061 T1.6mm 2.6 Dimension(WxLxH): 172.2 x 182.2 x 9 (mm) 2.7 Weight: 190 gf 1 2 C841-590014-A VSWR & Return Loss 3 E Plane Co-Polarization Patterns -15 -10 -5 0 5 10 15 0 30 60 90 120 150 180 210 240 270 300 330 -15 -10 -5 0 5 10 15 E Plane Co-pol 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz -180 -150 -120-90-60-300306090120150180 -30 -25 -20 -15 -10 -5 0 E Plane Co-pol Gain relative to zero degree reference actual gain(dB) Angle relative to zero degree reference(deg) 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz ETSI EN 302 326-3 DN3 Co-pol ETSI EN 302 326-3 DN2 Co-pol -180 -150 -120-90-60-300306090120150180 -40 -35 -30 -25 -20 -15 -10 -5 0 E Plane X-pol Gain relative to zero degree reference actual gain(dB) Angle relative to zero degree reference(deg) 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz ETSI EN 302 326-3 DN3 X-pol ETSI EN 302 326-3 DN2 X-pol 4 H Plane Co-Polarization Patterns -15 -10 -5 0 5 10 15 0 30 60 90 120 150 180 210 240 270 300 330 -15 -10 -5 0 5 10 15 H Plane Co-pol 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz -180 -150 -120-90-60-300306090120150180 -30 -25 -20 -15 -10 -5 0 H Plane Co-pol Gain relative to zero degree reference actual gain(dB) Angle relative to zero degree reference(deg) 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz ETSI EN 302 326-3 DN3 Co-pol ETSI EN 302 326-3 DN2 Co-pol -180 -150 -120 -90-60-300306090120150180 -40 -35 -30 -25 -20 -15 -10 -5 0 H Plane X-pol Gain relative to zero degree reference actual gain(dB) Angle relative to zero degree reference(deg) 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz ETSI EN 302 326-3 DN3 X-pol ETSI EN 302 326-3 DN2 X-pol 5 6 7 8 SGS Test Report Product：RF Antenna Contents No Description Report No. Page 1 PCB FR4 CE/2006/63691 P.10~12 2 Reflecting plate AL6061 CE/2007/38159 P.13~18 3 Cable RG-316 Cable CE/2007/16985 P.19~24 4 H.S Tube Heat Shrink Tube CE/2006/C6257A P.25~29 5 Connector MMCX Right Angle Plug KA/2006/72739 KA/2006/B1255 KA/2007/11514 P.30~38 6 Screw Carbon Steel;Ni Plated CE/2006/86534 P.39~42 7 Housing RG-316 Housing GZ0701003511/CHEM GZ0701003698/CHEM P.43~47 Result for RoHS：PASS 9 Test Report Report No. : CE/2006/63691 Date: 2006/06/19 Page: 1 of 3 Type of Product: Style/Item No: Sample Received: Testing Date: ============================================================================================ Test Result : - Please see the next page - 2006/6/12 FR-4 GOLD 2006/6/12 TO 2006/06/19 TAIWAN SHUANGMING INDUSTRY CO., LTD. NO. 25, ALLEY 177, LANE 879, GOANG FWU RD., TAOYUAN HSIEN, TAIWAN, R. O. C. The following merchandise was (were) submitted and identified by the client as : PCB The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. 10 Test Report Report No. : CE/2006/63691 Date: 2006/06/19 Page: 2 of 3 Test Result PART NAME NO.1: Result No.1 Monobromobiphenyl%0.0005N.D. Dibromobiphenyl%0.0005N.D. Tribromobiphenyl%0.0005N.D. Tetrabromobiphenyl%0.0005N.D. Pentabromobiphenyl%0.0005N.D. Hexabromobiphenyl%0.0005N.D. Heptabromobiphenyl%0.0005N.D. Octabromobiphenyl%0.0005N.D. Nonabromobiphenyl%0.0005N.D. Decabromobiphenyl%0.0005N.D. Total PBBs (Polybrominated biphenyls)/Sum of above %-N.D. Monobromobiphenyl ether%0.0005N.D. Dibromobiphenyl ether%0.0005N.D. Tribromobiphenyl ether%0.0005N.D. Tetrabromobiphenyl ether%0.0005N.D. Pentabromobiphenyl ether%0.0005N.D. Hexabromobiphenyl ether%0.0005N.D. Heptabromobiphenyl ether%0.0005N.D. Octabromobiphenyl ether%0.0005N.D. Nonabromobiphenyl ether%0.0005N.D. Decabromobiphenyl ether%0.0005N.D. Total PBBEs(PBDEs) (Polybrominated biphenyl ethers)/Sum of above %-N.D. Total of Mono to Nona- brominated biphenyl ether. (Note 4) %-N.D. With reference to USEPA3540C or USEPA3550C. Analysis was performed by HPLC/DAD, LC/MS or GC/MS. (prohibited by 2002/95/EC (RoHS), 83/264/EEC, and 76/769/EEC) MDL TAIWAN SHUANGMING INDUSTRY CO., LTD. NO. 25, ALLEY 177, LANE 879, GOANG FWU RD., TAOYUAN HSIEN, TAIWAN, R. O. C. Test Item (s):UnitMethod With reference to USEPA3540C or USEPA3550C. Analysis was performed by HPLC/DAD, LC/MS or GC/MS. (prohibited by 2002/95/EC (RoHS), 83/264/EEC, and 76/769/EEC) GREEN PCB (MIXED ALL PARTS) The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and of…

Text truncated - open the document above for the full version.

XtremeWave™ MFB Series XtremeWave™ Models 25007 MMDS, MFB19008A PCS, MFB24006 and MFB24008 2.4 GHz ISM Antennas XtremeWave™ MFB24012 MFB24010 and MFB24012 255 PCTEL Antenna Products Group, Inc. ORDER (800) 323-9122 http://www.maxrad.com General Specifications: Radome Material: UV resistant pultruded fiberglass Polarization: Vertical Lightning Protection: Not standard, but all models can be ordered with DC grounding. Add a “DC” suffix to the part number to choose the DC grounded version of the antenna. Nominal Impedance: 50 Ohms Mounting Base Diameter: 1.25 inches (all models except MFB24012) 1.5 inches (model MFB24012) Mounting Method (sold separately): MMK1924 – L bracket mount for wall or pipe mount (all models, except MFB24010 and MFB24012) MMK8A - Aluminum extruded bracket for mast mounting (all models, except model MFB24012) MMK11 - Ceiling mount bracket (for MFB24004, MFB24006 and MFB24008 only) MMK12 - Heavy duty bracket for mast mounting the MFB24012 MMK14 - Light duty mounting clamp for MFB24012 Termination: N female standard with all models, except MFB24012 N female, reverse polarity and reverse threaded connectors optional 16” RG-213 pigtail with N female connector for model MFB24012 only N male connector option available with models MFB24010, MFB24008, MFB24006 and MFB19008. To order, add “NM” to part number. Features and Benefits: •UV stable, pultruded fiberglass radome. Allows outdoor installation even in harsh climates. •Vented system design (all models except MFB24012). Provides reliable performance by protecting the electrical design against extreme moisture and/or temperatures. •Thread relief on connector (all models, except MFB24012 which has a pigtail). Improved accessibility for taping reduces installation time and improves overall effectiveness. •Internal o-ring seal in the base of the antenna with integrated connector at the base. Assures a watertight seal to prevent water from migrating into the antenna connector (all models, except MFB24012 which has a pigtail.) •Electrical downtilt options on select models. Provide system planners flexibility in challenging operating environments. The XtremeWave™ wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. These antennas feature a UV stable, vented radome that provides ultimate protection against weather elements. They can be mast, wall or ceiling mounted. PCS, 2.4 GHz ISM and MMDS Omnidirectional Base Station Antenna Series Model # Wind Survival Equivalent Flat Plate Area Lateral Thrust @ Rated Wind Bending Moment @ Rated Wind HeightWeight MFB19008A125 mph .07 ft 2 5.9 lbs5.7 ft-lbs24.0” (609.6 mm)0.70 lbs (0.318 kg) MFB24004125 mph .02 ft 2 2.1 lbs0.7 ft-lbs8.1” (205.7 mm)0.34 lbs (0.154 kg) MFB24006125 mph .04 ft 2 3.0 lbs1.4 ft-lbs11.6” (294.6 mm)0.38 lbs (0.172 kg) MFB24008125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB24008DT3125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB24008DT5125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB24008DT7125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB24008DT12125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB24010125 mph .11 ft 2 10.1 lbs14.7 ft-lbs36.0” (914.4 mm)0.65 lbs (0.295 kg) MFB24012125 mph .25 ft 2 22.4 lbs41 ft-lbs44.0” (1,118 mm)3.00 lbs (1.400 kg) MFB25007125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) MFB25007DT3125 mph .06 ft 2 5.2 lbs4.4 ft-lbs20.2” (513.1 mm)0.50 lbs (0.226 kg) Model #Frequency RangeGain Bandwidth @ 1.5:1 VSWR Vertical Beamwidth @ 1/2 Power VSWR Maximum Power Downtilt MFB19008A1850-1990 MHz8 dBi140 MHz12°< 1.5:125 WattsN/A MFB240042400-2483.5 MHz4 dBi100 MHz30°< 1.5:125 WattsN/A MFB240062400-2483.5 MHz6 dBi100 MHz20°< 1.5:125 WattsN/A MFB240082400-2483.5 MHz8 dBi100 MHz13°< 1.5:125 WattsN/A MFB24008DT32400-2483.5 MHz8 dBi100 MHz13°< 1.5:125 Watts3° MFB24008DT52400-2483.5 MHz8 dBi100 MHz13°< 1.5:125 Watts5° MFB24008DT72400-2483.5 MHz8 dBi100 MHz13°< 1.5:125 Watts7° MFB24008DT122400-2483.5 MHz8 dBi100 MHz13°< 1.5:125 Watts12° MFB240102400-2483.5 MHz10 dBi100 MHz9°< 1.5:125 WattsN/A MFB240122400-2500 MHz12 dBi100 MHz7°< 1.5:125 WattsN/A MFB250072500-2700 MHz7 dBi200 MHz13°< 1.5:125 WattsN/A MFB25007DT32500-2700 MHz7 dBi200 MHz13°< 1.5:125 Watts3° Electrical Specifications 256 PCTEL Antenna Products Group, Inc. ORDER (800) 323-9122 http://www.maxrad.com Specifications MMK1924 MFB24004 with MMK11 MMK8A Vented System MMK12 Mechanical Specifications 257 PCTEL Antenna Products Group, Inc. ORDER (800) 323-9122 http://www.maxrad.com Patterns 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 2525202015151010550055 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 303025252020151510105500 MFB19008A Elevation Cut MFB24004 Elevation Cut 258 PCTEL Antenna Products Group, Inc. ORDER (800) 323-9122 http://www.maxrad.com Patterns MFB24006 Elevation Cut MFB24008 Elevation Cut 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 2525202015151010550055 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 2525202015151010550055 259 PCTEL Antenna Products Group, Inc. ORDER (800) 323-9122 http://www.maxrad.com MFB24008DT5 Elevation Cut Patterns 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 2525202015151010550055 MFB24008DT3 Elevation Cut 10 190 20 200 30 210 40 220 50 230 60 240 70 250 80 260 90 270 100 280 110 290 120 300 130 310 140 320 150 330 160 340 170 350 1800 2525202015151010550055 Patterns 260 PCTEL Antenna Products Group, Inc. ORD…

Text truncated - open the document above for the full version.

Electromagnetic Compatibility Firetide Intentional Radiators 2200 CFR Title 47, 15.247; RSS-210, Issue 7, June 2007 MET Report: EMCS80650-FCC247 © 2008, MET Laboratories, Inc. Electromagnetic Compatibility Criteria for Intentional Radiators § 15.247(b) Peak Power Output and RF Exposure RF Exposure Requirements: §1.1307(b)(1) and §1.1307(b)(2): Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. RF Radiation Exposure Limit: §1.1310: As specified in this section, the Maximum Permissible Exposure (MPE) Limit shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Sec. 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Sec. 2.1093 of this chapter. MPE Limit Calculation: EUT’s operating frequencies @ 2412-2462 MHz ; highest conducted power = 25.34dBm (peak) therefore, Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 EUT maximum antenna gain = 13 dBi (Panel Antenna) Equation from page 18 of OET 65, Edition 97-01 S = PG / 4πR 2 or R = √PG / 4πS where, S = Power Density ( mW/cm 2 ) P = Power Input to antenna (341.9794mW) G = Antenna Gain (19.95numeric) R = (341.9794*19.95/ 4*3.14*1.0) 1/2 = (6823.387 / 12.56) 1/2 = 23.30cm MPE Limit Calculation: EUT’s operating frequencies @ 2412-2462 MHz ; highest conducted power = 25.34dBm (peak) therefore, Limit for Uncontrolled exposure: 1 mW/cm 2 or 10 W/m 2 EUT maximum antenna gain = 8 dBi (Omni Antenna) Equation from page 18 of OET 65, Edition 97-01 S = PG / 4πR 2 or R = √PG / 4πS where, S = Power Density ( mW/cm 2 ) P = Power Input to antenna (341.9794mW) G = Antenna Gain (6.30 numeric) S = (341.9794*6.30/ 4*3.14*20 2 ) = (2157.744 5024) = 0.43 mW/cm 2

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 3162 BELICK STREET y SANTA CLARA, CA 95054 y PHONE (408) 748-3585 y FAX (510) 489-6372 MET Report: EMCS80650-FCC247 © 2008, MET Laboratories, Inc. Page ii of vi Electromagnetic Compatibility Criteria Test Report for the Firetide Model 2200 Tested under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class B Digital Devices & 15.247 Subpart C & RSS-210, Issue 7, June 2007 for Intentional Radiators MET Report: EMCS80650-FCC247 April 3, 2008 Prepared For: Firetide 16795 Lark Ave, Suite 200 Los Gatos, CA 95032 Electromagnetic Compatibility Firetide Cover Page 2200 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMCS80650-FCC247 © 2008, MET Laboratories, Inc. Page iii of vi Electromagnetic Compatibility Criteria Test Report for the Firetide Model 2200 Tested Under the FCC Certification Rules contained in Title 47 of the CFR, Parts 15 Subpart B & ICES-003 for Class B Digital Devices & 15.247 Subpart C & RSS-210, Issue 7, June 2007 for Intentional Radiators Minh Ly, Project Engineer Jennifer Sanchez Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of FCC Rules Parts 15B, 15.247 and Industry Canada standards ICES-003, Issue 4 February 2004, RSS-210, Issue 7, June 2007 under normal use and maintenance. Shawn McMillen, Wireless Manager Electromagnetic Compatibility Lab Electromagnetic Compatibility Firetide Report Status 2200 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMCS80650-FCC247 © 2008, MET Laboratories, Inc. Page iv of vi Report Status Sheet Revision Report Date Reason for Revision ∅ January 17, 2008 Initial Issue. Electromagnetic Compatibility Firetide Table of Contents 2200 CFR Title 47, Part 15B, 15.247; RSS-210, Issue 7, June 2007 & ICES-003 MET Report: EMCS80650-FCC247 © 2008, MET Laboratories, Inc. Page v of vi Table of Contents I. Executive Summary .................................................................................................................................................1 A. Purpose of Test ...................................................................................................................................................2 B. Executive Summary ............................................................................................................................................2 II. Equipment Configuration .......................................................................................................................................3 A. Overview.............................................................................................................................................................4 B. References...........................................................................................................................................................5 C. Test Site ..............................................................................................................................................................6 D. Description of Test Sample.................................................................................................................................6 E. Equipment Configuration....................................................................................................................................9 F. Support Equipment ...........................................................................................................................................10 G. Ports and Cabling Information ..........................................................................................................................11 H. Mode of Operation............................................................................................................................................11 I. Method of Monitoring EUT Operation .............................................................................................................11 J. Modifications ....................................................................................................................................................11 a) Modifications to EUT..................................................................................................................11 b) Modifications to Test Standard....................................................................................................11 K. Disposition of EUT ...........................................................................................................................................11 III. Electromagnetic Compatibility Criteria for Unintentional Radiators ..............................................................12 § 15.107(a) Conducted Emissions Limits.............................................................................................................. 13 § 15.109(a) Radiated Emission Limits .................................................................................................................. 17 § 15.09(a) Radiated Emissions Limits.........................................…

Text truncated - open the document above for the full version.