RGB-68-ATRDCD68in Altura DC

Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection! Item #1001 784 408, 1001 784 409, 1001 784 407, 1001 784 410, 1001 784 405 Model #x UL Model #68-ATRDC USE AND CARE GUIDE ALTURA 68-INCH CEILING FAN To view an instructional video on how to install this product: 1. Go to www.homedepot.com and enter either the Item or Model number, found in the top right corner of the cover of this instruction manual, in the search eld. 2. Click on your product from the list of search results and click on the video link in the “Product Overview” section. 2 WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control part no. DP-51H, manufactured by Rhine. Table of Contents ................................................................2 Safety Information ...............................................................2 Warranty ...............................................................................3 Pre-Installation ....................................................................3 Installation ............................................................................6 Assembly ..............................................................................7 Operation ...........................................................................13 Care and Cleaning .............................................................15 Troubleshooting .................................................................15 1. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin. 2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 50 lbs. (22.7 kg). Use only UL-listed outlet boxes marked “Acceptable for Fan Support of 50 lbs. (22.7 kg) or less.” 4. The fan must be mounted with a minimum of 7 ft (2.1 m) of clearance from the trailing edge of the blades to the floor. 5. Do not place objects in the path of the blades. 6. To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan. 7. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 8. All set screws must be checked and retightened where necessary before installation. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. WARNING: Electrical diagrams are for reference only. If you are using a light kit, refer to the light kit instructions manual to make the electrical connections. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Safety Information Table of Contents CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box. READ AND SAVE THESE INSTRUCTIONS. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 50 lbs. (22.7 kgs) or less”, and use screws provided with t…

Text truncated - open the document above for the full version.

August 20, 2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: RGB-68-ATRDCD Product Name: 68in Altura DC Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>： Name：Charles Bucher Title：VP of Engineering Company：King of Fans, Inc.

August 20, 2020 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with K i n g o f F a n s , I n c . / 1951 N.W. 22nd Street, Fort Lauderdale, FL33311, USA <Signature>： Name：Charles Bucher Title：VP of Engineering Company：King of Fans, Inc.

. R O O L F O T S E D A L B K S I R E C U D E R O T : - T N I A M , S N O S R E P O T Y R U J N I F O NO: I . M S . P O U R G T A N I N W T : O T L H L I S O F P R E O H D T U F C O T E A R N O D / O M R R C O O E M N P O O Y N B E N D T S E R E A R E C O V P . A G T N E I N D T N S E : P 5 , 9 S 4 T 7 , N 4 3 E 6 T ; A 5 P , 9 8 R 8 E , 5 H 8 0 T ; O 5 , D 9 7 N 1 , 5 A 7 6 3 1 ; , 4 6 6 , 0 4 1 , 0 0 6 , 1 ; 1 0 1 ; 6 , 5 4 , 0 1 , 0 3 9 0 , 3 0 6 ; 6 I M S P E O T R N T E A T N A T P E E : T E S N T E E N P G I R S O S D O U L C T E O D Y O / N O U L O R S O C P O O M D P I E O R N B E N U T E N C S EST A A M E R I C A N O S : 5 , 9 4 7 , 4 3 6 ; 5 , 9 8 8 , 5 8 0 ; 5 , 9 7 1 , 5 7 3 ; 6 , 0 1 0 , 1 1 0 ; 6 , 0 1 0 , 3 0 6 ; E T N E I D N E P S E T N E T A P S O R T O Y ; 6 1 4 , 6 4 0 , 6 ; 1 4 , 5 9 3 , 0 6 U P C # 0 8 2 3 9 2 9 9 9 8 1 0 R G B - 6 D 8 - D C A T R F C C I D : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Label Location

Conducted Emission Te s t Setup: Radiated Emission Te s t Setup: