RGHURCHINBLUETOOTH SPEAKER

R4A URCHIN QUICK START GUIDE WHAT’S IN THE BOX: - URCHIN Speaker - Interchangeable Silicone Skin - USB Power Supply and Micro USB Cable READY FOR ANYTHING : The URCHIN is ready for all your on the go needs, from listening to music to answering your phone. It is water**, shock, and dust resistant. Take it with you in the shower, to the beach, on a hike, or attach it to your bike handle. The URCHIN’s looped handle design and threaded insert allows for many different attachment methods. Use the included accessories shown below or use household items like a rope or zipties. Check out other optional attachment methods and other color options for the removable silicone skin at shop.boommovement.com. Adhesive Screw Carabiner Suction Cup WARRANTY: We want you to have the best possible experience with your BOOM Product. If you experience any issues with the product, please let us know. For full information on warranty coverage, please visit us on the web at boommovement.com/support - AUX Input Cable - Adhesive Screw - Suction Cup - Carabiner R4A URCHIN QUICK START GUIDE POWERING THE URCHIN: To turn ON the URCHIN, press and hold the power button (pictured in red) for 2 seconds. The power LED, located to the right of the power button, will turn solid green when the Urchin is ON. To turn OFF the URCHIN, press and hold the power button for 2 seconds. The power LED will flash green and turn off when the Urchin is OFF. To CHARGE the URCHIN, plug the Micro USB cable into the input behind the port door. The power LED will turn red to indicate the URCHIN is charging. When charging is complete, the power LED will turn off. PAIRING WITH THE URCHIN: To pair your device with the URCHIN, press and hold the Bluetooth button (pictured in orange) for 3 seconds. The Bluetooth LED, located to the left of the Bluetooth button, will flash blue when the URCHIN is in pairing mode. In the settings on your device, select “Urchin R4A” and connect. Once your device has paired successfully, the URCHIN will make a tone and the Bluetooth LED will turn solid blue. USING THE URCHIN: Volume Up Press Once: Play / Pause Answer / Hangup Phone Call Press Twice: Track Forward Press Three Times: Track Back Volume Down

DEI Sales dba BOOM Movement Date:：2013-01-23 AUTHORIZATION LETTER To whom it may concern: We, the undersigned Definitive Technology hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15 C and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ Name : Norbert Richardson Title : Contracts Manager Company Name :DEI Sales dba BOOM Movement TEL： + 410.764.5471 FAX： + 410.764.5278 Mail : [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

Report No.: SA121203D03 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA121203D03 MODEL NO.: URCHIN, SUBK-A, SUBE- A, SURD-A, SUBK-B, SUBE-B, SURD-B FCC ID: RGHURCHIN RECEIVED: Dec. 3, 2012 TESTED: Dec. 11 ~ 14, 2012 ISSUED: Jan. 10, 2013 APPLICANT: DEI Sales dba BOOM Movement ADDRESS: One Viper Way Vista, CA 92081 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA121203D03 2 of 6 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ............................................................................................ 3 1. CERTIFICATION ......................................................................................................... 4 2. EVALUATION RESULT ............................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS .................................................................... 6 4. CONCLUSION ............................................................................................................ 6 Report No.: SA121203D03 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA121203D03 Original release. Jan. 10, 2013 Report No.: SA121203D03 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: BLUETOOTH SPEAKER MODEL NO.: URCHIN, SUBK-A, SUBE-A, SURD-A, SUBK-B, SUBE-B, SURD-B BRAND: BOOM Movement APPLICANT: DEI Sales dba BOOM Movement TESTED: Dec. 11 ~ 14, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model no.: URCHIN) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Jan. 10, 2013 ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: Jan. 10, 2013 ( Ken Liu / Manager ) Report No.: SA121203D03 5 of 6 Report Format Version 5.0.0 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ÿ f(GHz) is the RF channel transmit frequency in GHz . ÿPower and distance are rounded to the nearest mW and mm before calculation. ÿThe result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA121203D03 6 of 6 Report Format Version 5.0.0 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 3.4 5 1.053 3 Pass NOTE: 1. The antenna type is Dipole antenna with -5.87dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. 4. CONCLUSION Since Source-base time average power is b…

Text truncated - open the document above for the full version.

Report No.: RF121203D03 1 of 53 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF121203D03 MODEL NO.: URCHIN, SUBK-A, SUBE-A, SURD-A, SUBK-B, SUBE-B, SURD-B FCC ID: RGHURCHIN RECEIVED: Dec. 3, 2012 TESTED: Dec. 11 ~ 14, 2012 ISSUED: Jan. 10, 2013 APPLICANT: DEI Sales dba BOOM Movement ADDRESS: One Viper Way Vista, CA 92081 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121203D03 2 of 53 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD................................................................................. 4 1. CERTIFICATION .............................................................................................. 5 2. SUMMARY OF TEST RESULTS ...................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................... 6 3. GENERAL INFORMATION .............................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................. 10 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 13 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................ 13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................ 14 4. TEST TYPES AND RESULTS ........................................................................ 15 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...... 15 4.1.2 TEST INSTRUMENTS ................................................................................... 16 4.1.3 TEST PROCEDURES .................................................................................... 17 4.1.4 DEVIATION FROM TEST STANDARD .......................................................... 17 4.1.5 TEST SETUP ................................................................................................. 18 4.1.6 EUT OPERATING CONDITIONS ................................................................... 18 4.1.7 TEST RESULTS ............................................................................................. 19 4.2 CONDUCTED EMISSION MEASUREMENT ................................................. 26 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 26 4.2.2 TEST INSTRUMENTS ................................................................................... 26 4.2.3 TEST PROCEDURES .................................................................................... 27 4.2.4 DEVIATION FROM TEST STANDARD .......................................................... 27 4.2.5 TEST SETUP ................................................................................................. 28 4.2.6 EUT OPERATING CONDITIONS ................................................................... 28 4.2.7 TEST RESULTS ............................................................................................. 29 4.3 NUMBER OF HOPPING FREQUENCY USED .............................................. 35 4.3.1 LIMIT OF HOPPING FREQUENCY USED .................................................... 35 4.3.2 TEST SETUP ................................................................................................. 35 4.3.3 TEST INSTRUMENTS ................................................................................... 35 4.3.4 TEST PROCEDURES .................................................................................... 35 4.3.5 DEVIATION FROM TEST STANDARD .......................................................... 35 4.3.6 TEST RESULTS ............................................................................................. 35 4.4 DWELL TIME ON EACH CHANNEL .............................................................. 37 4.4.1 LIMIT OF DWELL TIME USED....................................................................... 37 4.4.2 TEST SETUP ................................................................................................. 37 4.4.3 TEST INSTRUMENTS ................................................................................... 37 4.4.4 TEST PROCEDURES ......................................…

Text truncated - open the document above for the full version.

1 of 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST-MODE A 2 of 4 CONDUCTED EMISSION TEST-MODE B 3 of 4 CONDUCTED EMISSION TEST-MODE C 4 of 4 RADIATED EMISSION TEST