RI7FN990A40HP5G NR Module

Telit Communications S.p.A.

Application Details

Equipment Class: CBE - Citizens Band End User Devices
Date of Grant: Jun 27, 2024
Application Purpose: Original Equipment
Date of Application: Jun 24, 2024
Equipment Note: 5G NR Module
Frequency Range: 3555.00000000 - 3694.98000000
Company: Telit Communications S.p.A.
Country: Italy

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Attestation Statements

Date: 2024-05-27 Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-120027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications LTD con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications LTD) Federal Communications Commission Equipment Authorization Division, Application Processing Branch Mills Road 7435 Oakland Columbia MD 21046 USA Attestation regarding ‘covered’ equipment and the Covered List for FCC ID: RI7FN990A40HP To whom it may concern, Per 2.911(d)(5)(i), Telit Communications S.p.A. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5)(ii), Telit Communications S.p.A. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsi- diaries or affiliates) as an entity producing “covered” equipment." Sincerely, Paolomaria Schiratti VP Global Certification Telephone: 0039 040 4192 111 Email: [email protected]

Attestation Statements

Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-120027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications LTD con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications LTD) Federal Communications Commission Equipment Authorization Division, Application Pro- cessing Branch Mills Road 7435 Oakland Columbia MD 21046 USA 2024-05-27 U.S. AGENT FOR SERVICE OF PROCESS - LETTER OF ATTESTATION U.S. Designated Agent: Contact Name: Ramy Mourad, VP of IoT Solutions U.S. Agent FRN: The agent for service of process does no other business with the FCC and does not have an FRN. Company name: Telit IoT Solutions Inc. Company Address: 5425 Page Road Suite 120, Durham NC 27703, United States Telephone No.: +1 949 540 1276 E-mail: [email protected] This letter is to confirm that we designate the above U.S. representative as agent for service of process for Telit Communications S.p.A as noted below, for all the future FCC submissions. Telit Communications S.p.A. and Telit IoT Solutions Inc are companies belonging to the same group Telit IoT Solutions Holding LTD. The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The agent is not affiliated with a test lab. Applicant: Company Name: Telit Communications S.p.A. Grantee Code: RI7 FRN: 0020384608 Company Address: Via Stazione di Prosecco 5/B – 34010 Sgonico (TS) - ITALY Contact Name: Paolomaria Schiratti Telephone No.: +39 0404192222 E-mail: [email protected] Best regards, _____________________ _________________ Paolomaria Schiratti Ramy Mourad VP Global Certification VP of IoT Solutions DocuSign Envelope ID: 30887BFF-8CCC-453E-801D-68E73529BD03

Cover Letter(s)

Date: May 24, 2024 Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-1 20027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications LTD con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications LTD) To whom it may concern Ref: FCC Modular Approval Checklist FCC ID: RI7FN990A40HP Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own shielding case. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Not applicable to licensed modules. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on evaluation board, and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The modular transmitter complies with RF exposure requirement. Sincerely, Paolomaria Schiratti VP Global Certification, R&D Telephone: 0039 040 4192 111 Email: [email protected]

Cover Letter(s)

Date: May 24, 2024 Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-120027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications LTD con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications LTD) To whom it may concern Ref: Confidentiality Request for FCC ID: RI7FN990A40HP Pursuant to §§ 0.457(d) and 0.459 of the FCC Rules, We Telit Communications S.p.A., Via Stazione di Prosecco 5/B, 34010 Sgonico, Trieste (Italy), request that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short-Term Long-Term Operation Description/Theory of Operation Short-Term Long-Term Tune-Up Procedure Short-Term Long-Term Block Diagrams Short-Term Long-Term Schematic Diagram Short-Term Long-Term Parts List Short Term Test Setup Photos Short-Term User Manual Short-Term External Photos Short-Term Internal Photos Telit Communications S.P.A. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Long-Term Confidentiality: The applicant requests the exhibits listed above as Long-Term confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the documents for 180 days after the grant of equipment authorization is issued. It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Paolomaria Schiratti VP Global Certification, R&D Telephone: 0039 040 4192 111 Email: [email protected]

Cover Letter(s)

ID Label/Location Info

FN990A40 -HP /FN990A28 -HP Drawing / location and Label Sample Rev. 2.X LABEL LAYOUT SPECIFICATION Te lit Documentation Center 2001702212 FN990 DEVICE LABEL LAYOUT (Laser mark) Rev.2.X Label data Raw label code: N/A (lasermark) Dimensions: N/A About the fields positioning, respect a general tolerance of 0.25mm where not differently defined. LABEL SAMPLE This picture is a sample showing all the applicable options therefore may be different from a real production label. LAYOUT DESCRIPTION: 1)Clear writing of text reported on row 0005 of Master BOM. Font Arial-Bold 5pt. Offset between (ref.0) point (shield edges) and object upper left corner x=10,2mm y=5,6mm 2)Telit Logo (File telit.bmp) (5,5x3mm). Offset between (ref.0) point (shield edges) and object upper left corner x=4mm y=4mm 3)Clear writing of text reported on row 0085 of Master BOM. Font Arial -Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=21,8mm y=2,4mm 4)For IMEI only modules (as per P32-EN): Barcode type 2D datamatrix of ID+BSN string formatted as below: First 15 char = Module ID number (IMEI) next char: ID separator = ; next char = write the string reported on row 0005 of 3990400xxx Module Part List Last 9 chars = MM1234567 where MM = Contract Manufacturer ID number (2 digits with leading zeros) as reported in P32-EN ANNEX 1234567 = serial 7 digits progressive number including leading zeros Example: 060000123 For IMEI+MACID modules (as per P32-EN): Barcode type 2D datamatrix of ID+BSN+MACID string formatted as below: First 15 char = Module ID number (IMEI) next char: ID separator = ; next chars = write the string reported on row 0005 of 3990400xxx Module Part List next 9 chars = MM1234567 where MM = Contract Manufacturer ID number (2 digits with leading zeros) as reported in P32-EN ANNEX 1234567 = serial 7 digits progressive number including leading zeros Example: 060000123 next char: ID separator = ; Last 17 chars = MACID number with separator “:” (AA:BB:CC:DD:EE:FF) Barcode type 2D datamatrix ECC200 size 5 x 5 mm tolerance xy +/- 0.5mm Quite zone: 1,5mm Offset between (ref.0) point (shield edges) and barcode upper left corner x=21,5 mm y=4,8mm tolerance xy +/- 0,1mm. 5)Placement of the logo reported on row 0049 of Master BOM respecting the dimensions in brackets. Offset between (ref.0) point (shield edges) and object upper left corner x=36,6 mm y=4,7mm 6)Clear writing of module ID number as indicated on the P32-EN Product ID number allocation document. Font Arial-Bold 4pt. Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=8,6mm 7)Clear writing of text reported on row 0080 of Master BOM. Font Arial-Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=7,7 mm y=8,6mm 8)Clear writing “Model:” followed by the text reported on row 0005 of Master BOM. Font Arial-Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=10,6mm 9)Clear writing of text reported on row 0030 of Master BOM. Font Arial-Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=12,6mm 10)Clear writing of text reported on row 0035 of Master BOM. Font Arial-Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=14,6mm 11)Clear writing of text reported on row 0015 of Master BOM. Font Arial-Bold 4pt Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=16,6mm 12)“Assembled in _____” write the name of Production country. Font Arial-Bold 3,5pt Offset between (ref.0) point (shield edges) and object upper left corner x=4,1mm y=24,5mm 13)Placement of the logo reported on row 0060 of Master BOM respecting the dimensions in brackets. Offset between (ref.0) point (shield edges) and object upper left corner x=29,3mm y=15,2mm 14)Placement of the logo reported on row 0052 of Master BOM respecting the dimensions in brackets. Offset between (ref.0) point (shield edges) and object upper left corner x=29,3mm y=18,2mm 15)Placement of the logo reported on row 0076 of Master BOM respecting the dimensions in brackets. Offset between (ref.0) point (shield edges) and object upper left corner x=29,3mm y=21,2mm NOTE: If in Master BOM the lines to which reference is done on layout specification don't exist, the field on the label is not applicable and therefore must not be filled. © Telit 2021-2022. All rights reserved; Commercial in confidence. No copying or distributing without prior written authorizati on 3 FN990A28 -HP FN990A40 -HP Label Sample Thank You!Telit reserves all rights to this document and the information contained herein. Products, names, logos and designs described he rein may in whole or in part be subject to intellectual property rights. The information contained herein is provided “as is.” No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by Tel it at any time. For most recent documents, please visit www.telit.com © 2021-2022 Telit. All Rights Reserved.

RF Exposure Info

TEL : 886-3-327-3456 Page : 1 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 RF EXPOSURE EVALUATION REPORT FCC ID : RI7FN990A40HP Equipment : 5G NR Module Brand Name : Model Name : FN990A40-HP Marketing Name : FN990A40-HP Applicant : Telit Communications S.p.A. Via Stazione Di Prosecco 5/B, Trieste 34010, Italy Manufacturer : Telit Communications S.p.A. Via Stazione Di Prosecco 5/B, Trieste 34010, Italy Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 5 3. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 6 3.1. Standalone Power Density Calculation ............................................................................................. 6 3.2. EN-DC active and transmit with WLAN/BT ....................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 History of this test report Report No. Version Description Issued Date FA270608-14 Rev. 01 Initial issue of report Jun. 03, 2024 TEL : 886-3-327-3456 Page : 4 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type 5G NR Module Brand Name Model Name FN990A40-HP Marketing Name FN990A40-HP FCC ID RI7FN990A40HP Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 42: 3450 MHz ~ 3550 MHz, 3550 MHz ~ 3600 MHz LTE Band 43: 3600 MHz ~ 3700 MHz LTE Band 48: 3550 MHz ~ 3700 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12: 699 MHz ~ 716 MHz 5G NR n13: 777 MHz ~ 787 MHz 5G NR n14: 788 MHz ~ 798 MHz 5G NR n25 : 1850 MHz ~ 1915 MHz 5G NR n26: 814 MHz ~ 849 MHz 5G NR n30 : 2305 MHz ~ 2315 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n48 : 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz 5G NR n71 : 663 MHz ~ 698 MHz 5G NR n77: 3450 MHz ~ 3550 MHz, 3700 MHz ~ 3980 MHz 5G NR n78: 3450 MHz ~ 3550 MHz, 3700 MHz ~ 3800 MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR: DFT-s-OFDM/CP-OFDM, Pi/2 BPSK/QPSK/16QAM/64QAM/256QAM HW 1.00 SW M0R.140005 EUT Stage Identical Prototype Remark: 1. When the uplink carrier aggregation active which the max power is equal to the non-CA max power, the device support UL MIMO on n38/41/48/77/78, when the UL uplink active the total power will not higher than non-UL MIMO max power. Reviewed by: Jason Wang Report Producer: Jasmine Ku TEL : 886-3-327-3456 Page : 5 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 2. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 6 of 10 FAX : 886-3-328-4978 Issued Date : Jun. 03, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA270608-14 3. Radio Frequency Radiation Exposure Evaluation 3.1. Standalone Power Density Calculation <UMTS> Band Lowest Frequency (MHz) Max Conducted output power (per Tune-up) (dBm) Duty Cyle (%) AVG Power with Duty Cycle (dBm) MPE evaluation distance (m) FCC MPE Limit (mW/cm^2) IC MPE Limit (W/m^2) IC MPE Limit (mW/cm^2) FCC/IC MPE Limit (mW)/cm^2 FCC/IC MPE Result / FCC/IC MPE Lmit Ratio FCC EIRP/ERP limit (W) FCC EIRP/ERP limit (dBm) IC EIRP/ERP limit (W) IC EIRP/ERP limit (dBm) Ant Gain to meet FCC MPE limit (dBi) Ant Gain to meet FCC ERP/EIRP limit (dBi) Max Gain to meet FCC ERP/EIRP and MPE limit (dBi) Ant Gain to meet IC MPE limit (dBi) Ant Gain to meet IC ERP/EIRP limit (dBi) Max Gain to meet …

Text truncated - open the document above for the full version.

Test Report

TEL : 886-3-327-3456 Page Number : A4-26 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-27 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-28 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-29 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-30 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-31 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-32 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L Adjacent Channel Leakage Ratio (ACLR) FR1 n48 / 20MHz / CP OFDM / QPSK Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-33 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / QPSK Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-34 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / QPSK Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-35 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-36 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-37 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-38 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-39 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-40 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-41 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 256QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-42 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 256QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-43 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 256QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-44 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / QPSK Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-45 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / QPSK Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-46 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / QPSK Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-47 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 16QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-48 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 16QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-49 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 16QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-50 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-51 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-52 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 64QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-53 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-54 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-55 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / 256QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-56 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L Conducted Spurious Emission FR1 n48 / 20MHz / CP OFDM / QPSK / 1RB1 Lowest Channel Middle Channel Highest Channel TEL : 886-3-327-3456 Page Number : A4-57 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L Frequency Stability Test Conditions FR1 n48 (QPSK) / Middle Channel Limit Temperature (°C) Voltage (Volt) BW 20MHz Note 2. Deviation (ppm) Result 50 …

Text truncated - open the document above for the full version.

Test Report

TEL : 886-3-327-3456 Page Number : A4-4 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / Middle Channel / Full RB QPSK 16QAM 64QAM 256QAM TEL : 886-3-327-3456 Page Number : A4-5 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L Occupied Bandwidth Mode FR1 n48 : OB BW(MHz) / CP OFDM BW 10MHz 15MHz 20MHz 25MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - - - - 18.20 18.15 - - Mod. 64QAM 256QAM 64QAM 256QAM 64QAM 256QAM 64QAM 256QAM Middle CH - - - - 18.14 18.17 - - BW 30MHz 40MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - - 37.88 37.87 - - - - Mod. 64QAM 256QAM 64QAM 256QAM 64QAM 256QAM 64QAM 256QAM Middle CH - - 37.90 37.83 - - - - TEL : 886-3-327-3456 Page Number : A4-6 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / Middle Channel / Full RB QPSK 16QAM 64QAM 256QAM TEL : 886-3-327-3456 Page Number : A4-7 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 40MHz / CP OFDM / Middle Channel / Full RB QPSK 16QAM 64QAM 256QAM TEL : 886-3-327-3456 Page Number : A4-8 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L Unwanted Emission (MASK) FR1 n48 / 20MHz / CP OFDM / QPSK Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-9 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / QPSK Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-10 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / QPSK Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-11 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-12 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-13 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 16QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-14 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-15 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Middle Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-16 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 64QAM Highest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-17 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 256QAM Lowest Channel 1RB0 1RBmax Full RB TEL : 886-3-327-3456 Page Number : A4-18 of 57 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG270608L FR1 n48 / 20MHz / CP OFDM / 256QAM Middle Channel 1R…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Paolomaria Schiratti(VP Global Certification)

[email protected]+390404192111Fax: +390404192333

Test Firm

Sporton International Inc.Alex Chen

[email protected]88633273456Fax: +886-3-327-0978

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
3	96	3.56 GHz - 3.69 GHz	127.40 mW	8M62W7D	2.5 ppm

Modular Type

Single Modular Approval

Confidentiality

Long Term

Grant Notes

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Bands 42, 43 and 48. This device also supports Frequency Range 1 5G NR modes of 10, 15, 20, 30 and 40 MHz bandwidth for TDD Band n48.

Other Applications from Telit Communications S.p.A.

RI7FE910C04WWI

5G Radio Module

Jul 01, 2026

Equipment Class

PCB - PCS Licensed Transmitter

RI7FE910C04NA

5G Radio Module

Jun 23, 2026

Equipment Class

CBE - Citizens Band End User Devices

RI7LE910T1SN

LE910T1-SN

Apr 09, 2026

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral

RI7ME310T1W1

ME310T1-W1

Mar 11, 2026

Equipment Class

PCB - PCS Licensed Transmitter

RI7LE310X1LA

LTE Cat 1 bis module

Jan 08, 2026

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral

Documents & Files

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Attestation Statements

Cover Letter(s)

Date: May 24, 2024 Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-120027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications LTD con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications LTD) To whom it may concern Ref: Confidentiality Request for FCC ID: RI7FN990A40HP Pursuant to §§ 0.457(d) and 0.459 of the FCC Rules, We Telit Communications S.p.A., Via Stazione di Prosecco 5/B, 34010 Sgonico, Trieste (Italy), request that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short-Term Long-Term Operation Description/Theory of Operation Short-Term Long-Term Tune-Up Procedure Short-Term Long-Term Block Diagrams Short-Term Long-Term Schematic Diagram Short-Term Long-Term Parts List Short Term Test Setup Photos Short-Term User Manual Short-Term External Photos Short-Term Internal Photos Telit Communications S.P.A. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Long-Term Confidentiality: The applicant requests the exhibits listed above as Long-Term confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the documents for 180 days after the grant of equipment authorization is issued. It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Paolomaria Schiratti VP Global Certification, R&D Telephone: 0039 040 4192 111 Email: [email protected]

Cover Letter(s)

ID Label/Location Info

RF Exposure Info

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
3	96	3.56 GHz - 3.69 GHz	127.40 mW	8M62W7D	2.5 ppm

Modular Type

Single Modular Approval

Confidentiality

Long Term

Grant Notes