RI7GC864Q2Quadband GSM/ GPRS Module

GC864 QUAD V2 and GC864 DUAL V2 Hardware User Guide 1vv0300874 Rev.0 – 2010-01-25 GC864 Hardware User Guide 1vv0300874 Rev.0 – 2010-01-25 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved. Page 2 of 64 APPLICABILITY TABLE PRODUCT GC864-QUAD V2 GC864-DUAL V2 GC864-QUAD V2 with SH GC864 Hardware User Guide 1vv0300874 Rev.0 – 2010-01-25 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved. Page 3 of 64 DISCLAIMER The information contained in this document is the proprietary information of Telit Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited. Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, Telit does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. Telit disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules. Telit reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document. Copyright: Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights are reserved. Copyright © Telit Communications SpA 2010.© GC864 Hardware User Guide 1vv0300874 Rev.0 – 2010-01-25 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved. Page 4 of 64 Contents APPLICABILITY TABLE ........................................................................................................................................2 1. INTRODUCTION................................................................................................................................6 1.1. SCOPE........................................................................................................................................................6 1.2. AUDIENCE...................................................................................................................................................6 1.3. CONTACT INFORMATION, SUPPORT.................................................................................................................6 1.4. DOCUMENT ORGANIZATION...........................................................................................................................7 1.5. TEXT CONVENTIONS.....................................................................................................................................8 1.6. RELATED DOCUMENTS..................................................................................................................................8 1.7. DOCUMENT HISTORY....................................................................................................................................9 2. OVERVIEW......................................................................................................................................10 3. GC864 MECHANICAL DIMENSIONS ................................................................................................11 3.1. MECHANICAL VIEW OF TELIT GC864-QUAD V2 WITH SIM HOLDER.................................................................12 4. GC864-QUAD V2 / GC864-DUAL V2 MODULE CONNECTIONS..........................................................13 4.1. PIN-OUT .................................................................................................................................................13 4.1.1. GC864-QUAD V2 / GC864-DUAL V2 Antenna Connector...............................................................16 5. HARDWARE COMMANDS................................................................................................................ 17 5.1. TURNING ON THE GC864-QUAD V2 / GC864-DUAL V2 ..............................................................................17 5.2. TURNING OFF THE GC864-QUAD V2 / GC864-DUAL V2.............................................................................19 5.2.1. Hardware Unconditional Restart ..................................................................................................20 6. POWER SUPPLY .............................................................................................................................22 6.1. POWER SUPPLY REQUIREMENTS..................................................................................................................22 6.2. GENERAL DESIGN RULES............................................................................................................................23 6.2.1. Electrical Design Guidelines .........................................................................................................23 6.2.2. Thermal Design Guidelines ...........................................................................................................27 6.2.3. Power Supply PCB Layout Guidelines...........................................................................................28 6.2.4. Parameters for ATEX Applications..............................................................................…

Text truncated - open the document above for the full version.

TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.11 of 16 Rev. 0 4PHOTOS AND ASSEMBLIES 4.1 Photos Telit GC864-QUAD V2 Module Final assembly

TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.10 of 17 Rev. 0 3 LABELS LAYOUT 3.1 Product Label The only purpose of this document is to show the layout. Do not use it to print the real label. Raw label code: 1vv0200772 Dimensions: 25 x 25mm DESCRIPTION: 1) Telit Logo 2) Device model name 3) Clear writing of FCC certification number 4) Clear writing of IC certification number 5) Clear writing of Software and Hardware release 6) Clear writing of production lot 7) CE0889 logo 2 1 6 3 7 8 4 5 8) Clear writing “Made in______” Production Country 3.2 Device Label The only purpose of this document is to show the layout. Do not use it to print the real label. Raw label code: 1vv0200268fpe Dimensions: 20 x 6mm DESCRIPTION: 1 1) Clear writing and Barcode type 2D datamatrix of module IMEI number

TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.11 of 17 Rev. 0 4 PHOTOS AND ASSEMBLIES 4.1 Photos Telit GC864-QUAD V2 Module Final assembly TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.12 of 17 Rev. 0 4.2 Photos of CS1394a PCB primary layer TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.13 of 17 Rev. 0 4.3 Photos of CS1394a PCB secondary layer without SIM Holder version TECHNICAL MANUAL Telit GC864-QUAD V2 Quad Band GPRS Data Terminal System Pag.14 of 17 Rev. 0 4.4 Photos of CS1394a PCB secondary layer with SIM Holder version

GE864-QUAD V2 / GC864-QUAD V2 Product Description 80331ST10074A Rev.1 –2010-03-03 GE864-QUAD V2/GC864-QUAD V2 Product Description 80331ST10074A Rev.1 –2010-03-03 Disclaimer The information contained in this document is the proprietary information of Telit Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited. Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, Telit does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. Telit disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules. Telit reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document. Copyright: Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights are reserved. Copyright © Telit Communications S.p.A. 2010. Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 2 of 44 GE864-QUAD V2/GC864-QUAD V2 Product Description 80331ST10074A Rev.1 –2010-03-03 Applicability Table PRODUCT GE864-QUAD V2 GE864-DUAL V2 GC864-QUAD V2 GC864-DUAL V2 GC-QUAD V2 with SIM holder Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 3 of 44 GE864-QUAD V2/GC864-QUAD V2 Product Description 80331ST10074A Rev.1 –2010-03-03 Contents 1. Introduction .............................................................................................................7 1.1. Scope ............................................................................................................................ 7 1.2. Audience....................................................................................................................... 7 1.3. Contact Information, Support ...................................................................................... 7 1.4. Document Organization ............................................................................................... 8 1.5. Text Conventions.......................................................................................................... 8 1.6. Related Documents ..................................................................................................... 9 1.7. Document History ........................................................................................................ 9 2. The GE864-QUAD V2 and GC864-QUAD V2 .............................................................10 2.1. Products Overview ..................................................................................................... 10 2.2. Target Market ............................................................................................................ 10 2.3. Product Features ....................................................................................................... 11 3. Product Description ...............................................................................................15 3.1. Size and 2D mechanical drawing............................................................................... 15 3.1.1. Mechanical View of Telit GC864-QUAD V2 with SIM Holder ...........................................17 3.2. Weight ........................................................................................................................ 18 3.3. Environmental requirements .................................................................................... 18 3.3.1. Temperature range ..........................................................................................................18 3.3.2. RoHS compliance.............................................................................................................18 3.4. Operating Frequency ................................................................................................. 18 3.5. Transmitter output power ......................................................................................... 19 3.6. Receiver sensitivity .................................................................................................... 19 3.7. Antenna ...................................................................................................................... 19 3.7.1. GC864 QUAD/PY RF antenna connector..........................................................................19 3.8. Supply voltage ............................................................................................................ 19 3.9. Power consumption ................................................................................................... 20 3.10. The user interface .................................................................................................. 20 3.11. Speech CODEC........................................................................................................ 20 3.12. SIM Reader ............................................................................................................. 21 Reproduction forbidden without Telit Communica…

Text truncated - open the document above for the full version.

Page 1 of 3 MPE Calculation for GC864-QUAD V2 - OET Bulletin 65 The FCC requires that the calculated MPE be equal to or less than a given limit dependent on frequency at a distance of 20 cm from a device to the body of a user. The transmitter operation for the GC864-QUAD V2 covers GSM850 and PCS1900 operating bands. The following FCC Rule Parts are applicable: Part 2.1091(c) Part 22 GSM850 devices operating at frequencies at or below 1.5GHz with effective radiated power (ERP) of 1.5 watts or more are subject to routine RF exposure evaluation, otherwise they are categorically excluded. Part 24 PCS1900 devices operating at frequencies above 1.5GHz with effective radiated power (ERP) of 3 watts or more are subject to routine RF exposure evaluation, otherwise they are categorically excluded. Part 24.232 (b) Mobile/ Portable stations are limited to 2 Watts EIRP peak power Part 22.913 (a)(2) The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts. The MPE calculation as given in FCC OET Bulletin 65, page 19 is used to calculate the safe operating distance for the user. S = EIRP/4 π R 2 Where S = Power density EIRP = Effective Isotropic Radiated Power (EIRP = P x G) P = Conducted Transmitter Power G = Antenna Gain (relative to an isotropic radiator) R = distance to the centre of radiation of the antenna For GSM 850 Transmitter frequency range = 824MHz to 849MHz Max. Conducted Transmitter Power = 33dBm (2.0W) @ antenna socket From Part 2.1091(c) routine RF exposure evaluation is required for ERP> 1.5W. Antenna use with gains above 0.86dBi would therefore require RF exposure evaluation. ie: EIRP = 33 +0.86 = 33.86dBm for 0.86dBi antenna ERP = EIRP – 2.1dB (half wave dipole gain) ERP = 33.86 – 2.1 = 31.67dBm (1.5W limit) Page 2 of 3 MPE Requirement From table 1 (b) - Limits for General Population/ Uncontrolled Exposure of FCC Rule Part 1.1310 for GSM850 S = f/1500 mW/cm 2 (f = operating frequency) S = 824/1500 = 0.55 mW/cm 2 (worst case) MPE Calculation to Determine Safe Maximum Antenna Gain (G) Values: S = 0.55 mW/cm 2 P = 2000mW R = 20cm S = PxG/4 π R 2 0.55 = 2000xG/(12.56 x 20 2 ) 0.55 x (12.56 x 20 2 ) = 2000 x G 0.55 x (12.56 x 20 2 )/ 2000 = G G = 1.38 (1.40dBi) Calculation for Maximum radiated power output For 1.4dBi gain antenna Power = 1.38 x 2.0 = 2.76W EIRP (34.4dBm) ERP = EIRP – 2.1dB (half wave dipole gain) Max. ERP = 34.4 – 2.1dBm = 32.3dBm This is below the Part 22.913 (a)(2) limit of 7W ERP The 1.4dBi maximum gain antenna will therefore comply with the required FCC rule parts. For PCS1900 Transmitter frequency range = 1850MHz to 1910MHz Max. Conducted Transmitter Power P = 30dBm (1.0W) @ antenna socket Calculation for Maximum radiated power output Maximum antenna gain G that can be used to comply with the maximum transmitter power limit of 2W EIRP of Part 24.232(b) is calculated as: P x G = 2 ie: G = 2/1 = 2 (3dBi) Page 3 of 3 For 3dBi antenna gain maximum ERP is < 3.0W, so from Part 2.1091(c), routine RF exposure evaluation is categorically excluded. The 3dBi maximum gain antenna will therefore comply with the required FCC rule parts. Conclusion The required 20cm RF exposure limits for General Population/ Uncontrolled Exposure FCC Rule Part 1.1310, and ERP Part 22.913 (a)(2), EIRP Part 24.232 (b) maximum transmitter power limits will not be exceeded for the GC864-QUAD using antennas having a maximum gain of 1.4dBi (850MHz) and 3.0dBi (1900MHz) respectively.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: GC864-QUAD V2 To: FCC Part 22: 2009 Subpart H, FCC Part 24: 2009 Subpart E, RSS 132 Issue 2 September 2005 and RSS-133 Issue 5 February 2009 Test Report Serial No: RFI/RPT2/RP76921JD03A Supersedes Test Report Serial No: RFI/RPT1/RP76921JD03A This Test Report Is Issued Under The Authority Of Brian Watson, Operations Director: Checked By: Nigel Davison Signature: Date of Issue: 31 March 2010 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 Page 2 of 50 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 RFI Global Services Ltd Page 3 of 50 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 3. Equipment Under Test (EUT) ....................................................................................................... 9 4. Operation and Monitoring of the EUT during Testing ............................................................. 12 5. Measurements, Examinations and Derived Results ................................................................ 13 6. Measurement Uncertainty .......................................................................................................... 48 Appendix 1. Test Equipment Used ................................................................................................49 TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 Page 4 of 50 RFI Global Services Ltd 1. Customer Information Company Name: Telit Communications S.p.A. Address: Via Stazione di Prosecco, 5/B Sgonico TS 34010 Italy TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 RFI Global Services Ltd Page 5 of 50 2. Summary of Testing 2.1. General Information – FCC Part 22 Specification Reference: 47CFR22 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2009: Part 22 Subpart H (Public Mobile Services) Specification Reference: RSS-GEN Issue 2 June 2007 Specification Title: General Requirements and Information for the Certification of Radiocommunication Equipment Specification Reference: RSS-132 Issue 2 Sep 2005 Specification Title: Cellular Telephones Employing New Technologies Operating in the Bands 824-849 MHz and 869-894 MHz Specification Reference: RSS-133 Issue 5 Feb 2009 Specification Title: GHz Personal Communications Services Specification Reference: SRSP-510 Issue 4 Feb 2008 Specification Title: Technical Requirements for Personal Communications Services in the Bands 1850-1915 MHz and 1930-1995 MHz Specification Reference: SRSP-503 Issue 6 Jun 2003 Specification Title: Technical Requirements for Cellular Radiotelephone Systems Operating in the Bands 824 – 849 MHz and 869 – 894 MHz Site Registration: FCC: 209735 Industry Canada: 3245B-2 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 02 March 2010 to 19 March 2010 TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 Page 6 of 50 RFI Global Services Ltd 2.2. Summary of Test Results – FCC Part 22 FCC Reference (47CFR ) IC Reference Measurement Result FCC Part 15.109 RSS-Gen 4.10/6.0 RSS-132 4.6 Receiver/Idle Mode Radiated Spurious Emissions FCC Part 22.913(a) RSS-132 4.4 SRSP-503 5.1.3 Transmitter Carrier Output Power and Effective Radiated Power (ERP) FCC Part 22.355 RSS-132 4.3 RSS Gen 4.7 Transmitter Frequency Stability (Temperature Variation) FCC Part 22.355 RSS-132 4.3 RSS Gen 4.7 Transmitter Frequency Stability (Voltage Variation) FCC Part 2.1049 RSS-Gen 4.6.1 Transmitter Occupied Bandwidth FCC Part 2.1051/22.917 RSS-132 4.5 Transmitter Out of Band Conducted Emissions FCC Part 2.1051/22.917 RSS-132 4.5 Transmitter Conducted Emissions at Band Edges FCC Part 2.1053/22.917 RSS-132 4.5 Transmitter Out of Band Radiated Emissions Key to Results = Complied = Did not comply TEST REPORT SERIAL NO: RFI/RPT2/RP76921JD03A ISSUE DATE: 31 MARCH 2010 RFI Global Services Ltd Page 7 of 50 2.3. General Information – FCC Part 24 Specification Reference: 47CFR24 Specification Title: Code of Federal Regulations Volume 47 (Telecommunications) 2009: Part 24 Subpart E (Personal Communication Services) Specification Reference: RSS-GEN Issue 2 June 2007 Specification Title: General Requirements and Information for the Certification of Radiocommunication Equipment Specification Reference: RSS-133 Issue 5 Feb 2009 Specification Title: GHz Personal Communications Services Specification Reference: SRSP-510 Issue 4 Feb 2008 Specification Title: Technical Requirements for Personal Communications Services (PCS) in the Bands 1850-1915 MHz and 1930-1995 MHz Site Registration: FCC: 209735 Industry Canada: 3245B-2 Location of Testing: RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH. Test Dates: 02 March to 19 March 2010 2.4. Summary of Test Results – FCC Part 24 FCC Reference (47CFR) IC Reference Measurement Result FCC Part 15.109 RSS-Gen 4.10/6.0 RSS-133 6.6 Receiver/Idle Mode Radiated Spurious Emissions FCC Part 24.232 RSS-133 6.4 SRSP-510 5.1.2 Transmitter Carrier Output Power and Effective Isotropic Radiated Power (EIRP) FCC Part 24.235 RSS-133 6.3 RSS Gen 4.7 Transmitter Frequency Stability (Temperature & Voltage Variation) FCC Pa…

Text truncated - open the document above for the full version.