RI7LE910CXSAXLTE wireless module

Telit Communications S.p.A. Via Stazione di Prosecco n. 5/B 34010 Sgonico (TS) - ITALY Phone +39 040 4192 111 Fax +39 040 4192 333 Cap. Soc. € 3.000.000 Partita IVA 03711600266 Cod.Fisc. 03711600266 Nr. R.E.A. TS-120027 Società soggetta all'attività di direzione e coordinamento da parte di Telit Communications PLC con sede in Londra (art.2497 bis C.C.) Società con socio unico (Telit Communications PLC) Hereby authorize one Mr. Antonino Sgroi - VP Global R&D Mr. Paolomaria Schiratti – VP Global Certification Mr. Gaetano Scognamiglio – VP Global Low Category Cellular R&D Mr. Massimiliano Lonzar - VP Global Application Engineering To act on our behalf, until otherwise notified, in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is applicable to all Telit Communications s.p.a. products with: FCC grantee code Rl7 and IC Company number: 5131 A Signed on behalf of Telit Communications spa. Telephone: 1-919-415-1517 e-mail: [email protected] Date: June 25, 2020 Authorization Letter We, Telit Communications S.p.A Via Stazione di Prosecco 5/B 34010 Sgonico (Trieste) - ITALY

Confidentiality request Date: 13/11/2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: RI7LE910CXSAX To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Telit Communications S.p.A. hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA Testing and Certification S.A.U. in the event information regarding the product or the product is made available to the public. DEKRA Testing and Certification S.A.U. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, PA __________________________ By: Paolomaria Schiratti Title: VP Global Certification Company: Telit Communications S.p.A. Telephone: +390404192111 e-mail: [email protected]

FCC Modular approval letter Date: 13/11/2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: RI7LE910CXSAX To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. Sincerely, PA __________________________ By: Paolomaria Schiratti Title: VP Global Certification Company: Telit Communications S.p.A. Telephone: +390404192111 e-mail: [email protected]

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66136RAN.001A1 2020-10-27 Test report No: NIE: 66136RAN.001A1 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091 ISED RSS-102 Issue 5:2015 (*) Identification of item under evaluation LTE Wireless module (*) Trademark Telit (*) Model and /or type reference LE910C1-SAX (*) Other identification of the product Hardware version: 1.10 Software version: M0F.313002 FCC ID: RI7LE910CXSAX IC:5131A-LE910CXSAX (*) Features GNSS Audio: VoLTE Manufacturer Telit Wireless Solutions Co., LTD 13th Fl.,Shinyoung Securities Bld, 6, Gukjegeumyung-ro 8-gil Yeongdeungpo-gu, Seoul, 07330, SOUTH KOREA Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. ISED RSS-102 Issue 5 (2015-03) – Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) Summary IN COMPLIANCE Approved by (name / position & signature) Miguel Lacave Antennas Lab Manager Date of issue 2020-10-27 Report template No FAN36_01 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66136RAN.001A1 Page 2 of 11 2020-10-27 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 3 General description of the device under evaluation ..................................................................... 4 Maximum Antenna Gain determination for RF Exposure compliance .......................................... 4 Appendix A: FCC RF Exposure information ................................................................................ 6 FCC RF Exposure evaluation ................................................................................................. 7 FCC MPE Evaluation ............................................................................................................. 8 FCC EIRP Limits .................................................................................................................... 8 Appendix B: ISED RF Exposure information ............................................................................... 9 ISED RF Exposure evaluation for mobile devices ................................................................. 10 ISED MPE Evaluation .......................................................................................................... 11 ISED EIRP Limits ................................................................................................................. 11 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66136RAN.001A1 Page 3 of 11 2020-10-27 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item tested", "Trademark", "Model and/or type reference tested", “General description of the device” and "Other identification of the product"). 2. Maximum output power. DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client Telit Wireless Solutions Co., LTD 13th Fl.,Shinyoung Securities Bld, 6, Gukjegeumyung-ro 8-gil Yeongdeungpo-gu, Seoul, 07330, SOUTH KOREA Document history Report number Date …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 50 of 84 2020-11-03 High Channel: LTE Band 2. 16QAM MODULATION. BW = 20 MHz. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 51 of 84 2020-11-03 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 52 of 84 2020-11-03 Spurious Emissions at Antenna Terminals SPECIFICATION: FCC §2.1051 and §24.238. RSS-133. Clause 6.5. The power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. METHOD: The EUT RF output connector was connected to a spectrum analyser and to the Universal Radio Communication tester R&S CMW500 (selecting maximum transmission power of the EUT and different modes of modulation) using a 50 ohm attenuator and a power splitter. The spectrum was investigated from 9 kHz to 20 GHz. For LTE mode the configuration of Resource Blocks and modulation which is the worst case for conducted power was used. The reading of the spectrum analyser is corrected with the attenuation loss of connection between output terminal of EUT and input of the spectrum analyser. Measurement Limit: According to specification. the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. At Po transmitting power. the specified minimum attenuation becomes 43+10log (Po). and the level in dBm relative Po becomes: Po (dBm) – [43 + 10 log (Po in mwatts) - 30] = - 13 dBm TEST SETUP: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 53 of 84 2020-11-03 RESULTS: LTE Band 2. QPSK MODULATION. BW = 1.4 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit LTE Band 2. QPSK MODULATION. BW = 3 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit LTE Band 2. QPSK MODULATION. BW = 5 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit LTE Band 2. QPSK MODULATION. BW = 10 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit LTE Band 2. QPSK MODULATION. BW = 15 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit LTE Band 2. QPSK MODULATION. BW = 20 MHz. - Low Channel: No spurious frequencies detected at less than 20 dB below the limit - Middle Channel: No spurious frequencies detected at less than 20 dB below the limit - High Channel: No spurious frequencies detected at less than 20 dB below the limit Measurement uncertainty (dB): < ± 2.77 Verdict: PASS DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 54 of 84 2020-11-03 LTE Band 2. QPSK MODULATION. BW = 1.4 MHz. Low Channel: The peak above the limit is the carrier frequency. Middle Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 55 of 84 2020-11-03 High Channel: The peak above the limit is the carrier frequency. LTE Band 2. QPSK MODULATION. BW = 3 MHz. Low Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 56 of 84 2020-11-03 Middle Channel: The peak above the limit is the carrier frequency. High Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 57 of 84 2020-11-03 LTE Band 2. QPSK MODULATION. BW = 5 MHz. Low Channel: The peak above the limit is the carrier frequency. Middle Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 58 of 84 2020-11-03 High Channel: The peak above the limit is the carrier frequency. LTE Band 2. QPSK MODULATION. BW = 10 MHz. Low Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.001 Page 59 of 84 2020-11-03 Middle Channel:…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 67 of 146 2020-11-20 LTE Band 66. QPSK MODULATION. BW = 5 MHz. Low Channel: Middle Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 68 of 146 2020-11-20 High Channel: LTE Band 66. 16QAM MODULATION. BW = 5 MHz. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 69 of 146 2020-11-20 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 70 of 146 2020-11-20 LTE Band 66. QPSK MODULATION. BW = 10 MHz. Low Channel: Middle Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 71 of 146 2020-11-20 High Channel: LTE Band 66. 16QAM MODULATION. BW = 10 MHz. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 72 of 146 2020-11-20 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 73 of 146 2020-11-20 LTE Band 66. QPSK MODULATION. BW = 15 MHz. Low Channel: Middle Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 74 of 146 2020-11-20 High Channel: LTE Band 66. 16QAM MODULATION. BW = 15 MHz. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 75 of 146 2020-11-20 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 76 of 146 2020-11-20 LTE Band 66. QPSK MODULATION. BW = 20 MHz. Low Channel: Middle Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 77 of 146 2020-11-20 High Channel: LTE Band 66. 16QAM MODULATION. BW = 20 MHz. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 78 of 146 2020-11-20 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 79 of 146 2020-11-20 Spurious emissions at antenna terminals SPECIFICATION: FCC §27.53 (g): For operations in the 600 MHz band and the 698-746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kilohertz or greater. However, in the 100 kilohertz bands immediately outside and adjacent to a licensee's frequency block, a resolution bandwidth of at least 30 kHz may be employed. FCC §27.53 (h): According to specification, the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. RSS-130 Clause 4.7.1: The unwanted emissions in any 100 kHz bandwidth on any frequency outside the low frequency edge and the high frequency edge of each frequency block range(s), shall be attenuated below the transmitter power, P (dBW), by at least 43 + 10 log10 p (watts), dB. However, in the 100 kHz band immediately outside of the equipment's frequency block range, a resolution bandwidth of 30 kHz may be employed. RSS-139 Clause 6.6. According to specification, the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. METHOD: The EUT RF output connector was connected to a spectrum analyser and to the Universal Radio Communication tester R&S CMW500 (selecting maximum transmission power of the EUT and different modes of modulation) using a 50 Ohm attenuator and a power divider. The spectrum was investigated from 9 kHz to 8 GHz for LTE Band 12 and from 9 kHz to 18 GHz for LTE Band 66. The reading of the spectrum analyser is corrected with the attenuation loss of connection between output terminal of EUT and input of the spectrum analyser. The configuration of Resource Blocks and modulation which is the worst case for conducted power was used. TEST SETUP: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 80 of 146 2020-11-20 RESULTS: LTE BAND: Test performed on the worst-case modulation and worst RB and worst Offset for all the nominal BW of each LTE band. LTE Band 12. QPSK MODULATION. BW = 1.4 MHz. - Low Channel: No spurious frequencies at less than 20 dB below the limit in all the range. - Middle Channel: No spurious frequencies at less than 20 dB b…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 98 of 146 2020-11-20 High Channel: The peak above the limit is the carrier frequency. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 99 of 146 2020-11-20 Spurious emissions at antenna terminals at Block Edges SPECIFICATION: FCC §27.53 (g): For operations in the 600 MHz band and the 698-746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kilohertz or greater. However, in the 100 kilohertz bands immediately outside and adjacent to a licensee's frequency block, a resolution bandwidth of at least 30 kHz may be employed. FCC §27.53 (h): According to specification. the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. At Po transmitting power. the specified minimum attenuation becomes 43+10log (Po). and the level in dBm relative Po becomes: Po (dBm) – [43 + 10 log (Po in mwatts) - 30] = -13 dBm RSS-130 Clause 4.7.1: The unwanted emissions in any 100 kHz bandwidth on any frequency outside the low frequency edge and the high frequency edge of each frequency block range(s), shall be attenuated below the transmitter power, P (dBW), by at least 43 + 10 log10 p (watts), dB. However, in the 100 kHz band immediately outside of the equipment's frequency block range, a resolution bandwidth of 30 kHz may be employed. RSS-139 Clause 6.6: In the first 1.0 MHz bands immediately outside and adjacent to the equipment’s smallest operating frequency block, which can contain the equipment’s occupied bandwidth, the emission power per any 1% of the emission bandwidth shall be attenuated below the transmitter output power P (in dBW) by at least 43 + 10 log10 p (watts) dB. After the first 1.0 MHz outside the equipment’s smallest operating frequency block, which can contain the equipment’s occupied bandwidth, the emission power in any 1 MHz bandwidth shall be attenuated below the transmitter output power P (in dBW) by at least 43 + 10 log10 p (watts) dB. METHOD: The EUT RF output connector was connected to a spectrum analyser and to the Universal Radio Communication tester R&S CMW500 (selecting maximum transmission power of the EUT and different modes of modulation) using a 50 Ohm attenuator and a power splitter. The reading of the spectrum analyser is corrected with the attenuation loss of connection between output terminal of EUT and input of the spectrum analyser. The configuration of modulation which is the worst case for conducted power was used. For LTE Band 12 , as indicated in FCC part 27.53 (g), in the 100 kHz bands immediately outside and adjacent to the licensee’s frequency block or band, a resolution bandwidth of 30 kHz may be employed. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 100 of 146 2020-11-20 TEST SETUP: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 101 of 146 2020-11-20 RESULTS: LTE Band 4. LTE QPSK MODULATION: RB=1, RB=1, RB=1, RB=1, RB=1, RB=1 , Offset=Max, Offset=Max, Offset=Max, Offset =Max, Offset=Max, Offset =Max, BW=1.4 MHz BW=3 MHz BW=5 MHz BW = 10 MHz BW=15 MHz BW = 20 MHz Maximum measured level at High Block Edge at antenna port (dBm) -20.49 -19.04 -20.43 -28.50 -30.03 -35.33 LTE QPSK MODULATION: RB=All, RB=All, RB=All, RB=All, RB=All, RB=All, Offset=0, Offset=0, Offset=0, Offset =0, Offset=0, Offset =0, BW=1.4 MHz BW=3 MHz BW=5 MHz BW = 10 MHz BW=15 MHz BW = 20 MHz Maximum measured level at High Block Edge at antenna port (dBm) -23.55 -24.91 -24.60 -25.01 -25.40 -27.41 Measurement uncertainty: <±2.57 dB Verdict: PASS LTE Band 12. LTE QPSK MODULATION: RB=1, RB=1 , RB=1, RB=1 , Offset=0, Offset =0, Offset=0, Offset =0, BW=1.4 MHz BW = 3 MHz BW=5 MHz BW = 10 MHz Maximum measured level at Low Block Edge at antenna port (dBm) -24.20 -23.52 -22.75 -36.52 LTE QPSK MODULATION: RB=All, RB=All, RB=All, RB=All, Offset=0, Offset=0, Offset=0, Offset=0, BW=1.4 MHz BW = 3 MHz BW=5 MHz BW = 10 MHz Maximum measured level at Low Block Edge at antenna port (dBm) -25.01 -26.04 -28.68 -34.03 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66136RRF.002A1 Page 102 of 146 2020-11-20 LTE QPSK MODULATION: RB=1, RB=1 , RB=1, RB=1 , Offset=Max, Offset =Max, Offset =Max, Offset =Max, BW=1.4 MHz BW = 3 MHz BW=5 MHz BW = 10 MHz Maximum measured level at High Block Edge at antenna port (dBm) -23.82 -23.09 -22.13 -36.25 LTE QPSK MODULATION: RB=All, RB=All, RB=Al…

Text truncated - open the document above for the full version.