
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
- 1 - LN931-NAG Hardware Specification - 2 - CONTENTS 1. GENERAL DESCRIPTION....................................................................4 1.1 SYSTEM MAIN FEATURE ....................................................................5 1.2 SYSTEM BLOCK DIAGRAM ................................................................8 1.3 PIN DEFINITION .....................................................................................9 1.4 PLATFORM CONNECTION DESIGN ............................................... 14 2. HARDWARE FEATURES ................................................................... 22 2.1 MOBILE DATA MODEM ............................................................................ 22 2.2 RF TRANSCEIVER ..................................................................................... 23 2.3 POWER MANAGEMENT IC ...................................................................... 23 2.4 ANTENNA DESIGN .................................................................................... 24 3. MECHANICAL SPECIFICATIONS .................................................... 27 3.1 OVERVIEW .................................................................................................. 27 3.2 MECHANICAL CONSTRAINTS ................................................................ 27 3.3 M.2 CARD ASSEMBLY .............................................................................. 28 3.4 CONNECTOR ASSEMBLY ....................................................................... 29 4. ELECTRICAL SPECIFICATIONS ...................................................... 30 4.1 RECOMMENDED OPERATING CONDITIONS ...................................... 30 4.2 POWER CONSUMPTION .......................................................................... 30 5. RF PERFORMANCE SPECIFICATIONS .......................................... 31 - 3 - 5.1 RF MAXIMUM TX POWER SPECIFICATIONS ...................................... 31 5.2 RF MIN. RX SENSITIVITY SPECIFICATIONS ........................................ 32 6. SOFTWARE REQUIREMENTS.......................................................... 33 4 1. General Description T77H468 is designed to enable wireless data connectivity for notebook computer or any other device compatible with the PCI Express M.2 Specification 3042 type slot. T77H468 is the data card solution that delivers wireless wide-area network (WWAN) connectivity for the LTE, UMTS (HSDPA/HSUPA/HSPA+/DC-HSPA+), CDMA 1xRTT/CDMA EV-DOrA/ CDMA EVDO-rB, GSM/GPRS/EDGE and GPS/Glonass protocols in one hardware configuration. WTR1605L SKU NA-1-S3 G C W L QUAD BAND BC 0,1 Band 1,2,4, 5,8 Band 2,4,5,13,17,25 TX_LB1 17 TX_LB2 850/900 TX_LB3 13 TX_LB4 0 5,8 5, 8r TX_MB1 4 4 TX_MB2 1800/1900 TX_MB3 1 1,2 1r, 2,25 TX_MB4 TX_HB PRX_LB1 13,17 PRX_LB2 850/900 8 PRX_LB3 0 5 5 PRX_MB1 1800/1900 PRX_MB2 1 2 2 PRX_MB3 1 PRX_HB 4 4 DRX_LB1 0 5,8 5 DRX_LB2 17 DRX_LB3 13 DRX_MB 1 2 2,25 DRX_HB 1,4 4 5 1.1 System Main Feature Feature Description Physical PCI express M.2 module, size 3042, 75Pin golden finger Electrical Single VCC supply (3.3V+/-5% follow M.2 standard) Dimension Dimensions (L × W × H): 42 mm × 30 mm × 2.3 mm, maximum height=2.38mm (add PCB tolerance=0.08mm) Shielding design Shield case on board design, no additional shielding requirement Weight Approximately 6.2g USIM Off-board USIM connector supported Operating Bands WCDMA/HSDPA/HSUPA/HSPA+ operating bands: Band 1: 1920 to 1980 MHz (UL), 2110 to 2170 MHz (DL) Band 2: 1850 to 1910 MHz (UL), 1930 to 1990 MHz (DL) Band 4: 1710 to 1755 MHz (UL), 2110 to 2155 MHz (DL) Band 5: 824 to 849 MHz (UL), 869 to 894 MHz (DL) Band 8: 880 to 915 MHz (UL), 925 to 960 MHz (DL) GSM operating bands: GSM850: 824 to 849 MHz (UL), 869 to 894 MHz (DL) E-GSM900: 880 to 915 MHz (UL), 925 to 960 MHz (DL) DCS1800: 1710 to 1785 MHz (UL), 1805 to 1880 MHz (DL) PCS1900: 1850 to 1910 MHz (UL), 1930 to 1990 MHz (DL) LTE FDD operating bands: Band 2: 1850 to 1910 MHz (UL), 1930 to 1990 MHz (DL) Band 4: 1710 to 1755 MHz (UL), 2110 to 2155 MHz (DL) Band 5: 824 to 849 MHz (UL), 869 to 894 MHz (DL) Band 13: 777 to 787 MHz (UL), 746 to 756 MHz (DL) Band 17: 704 to 716 MHz (UL), 734 to 746 MHz (DL) Band 25: 1850 to 1915 MHz (UL), 1930 to 1995 MHz (DL) CDMA 1X/CDMA EV-DOrB operating bands: BC0: 824 to 849 MHz (UL), 869 to 894 MHz (DL) BC1: 1850 to 1910 MHz (UL), 1930 to 1990 MHz (DL) Diversity/2nd Rx All WCDMA/HSDPA/HSUPA/HSPA+ operating bands All CDMA 1X/CDMA EVDO operating bands All LTE operating bands GNSS GPS: L1 (1575.42MHz) GLONASS: L1 (1602MHz) USIM Voltage Support 1.8V and 2.85V, and auto detects follow SIM card type Antenna connectors MAIN and AUX(supports Diversity and GPS simultaneously) 6 Throughput GPRS: DL 85.6 kbps /UL 85.6 kbps EDGE: DL 236.8 kbps/UL 236.8 kbps WCDMA CS: DL 64 kbps /UL 64 kbps WCDMA PS: DL 384 kbps /UL 384 kbps HSPA+: DL 21.6 Mbps /UL 5.76 Mbps DC-HSPA+ :DL 42 Mbps/UL 5.76 Mbps CDMA 1x: DL 153.6 kbps/UL 153.6 kbps EVDO Rev.A: DL 3.1 Mbps /UL 1.8 Mbps EVDO Rev.B: DL 14.7 Mbps/UL 5.4 Mbps LTE FDD :DL:100 Mbps/UL 50 Mbps @20M BW cat3 LTE air interface LTE R9, Cat3, 20MHz BW (FDD: up to 100 Mbps downlink, 50 Mbps uplink) FDD: up to 100 Mbps downlink, 50 Mbps uplink 1.4 to 20 MHz RF bandwidth 1X2 MISO (1Tx and 2Rx for two downlinks simultaneously) IPv6, QoS WCDMA/HSPA air interface R99: All modes and data rates for WCDMA FDD R5 HSDPA PS data speeds up to 7.2 Mbps on the downlink R6 HSUPA E-DCH data rates of up to 5.76 Mbps for 2 ms TTI (UE category 6) uplink R7 HSPA+ Downlink 64 QAM; up to 21 Mbps 1X2 MISO (1Tx and 2Rx for two downlinks simultaneously) 2Rx with 16 QAM; up to 28 Mbps Uplink 16 QAM; up to 5.76 Mbps R8 DC-HSPA+ Downlink dual carrier with 64 QAM; up to 42 Mbps CDMA air interface 1xRTT 153.6 kbps forward link, 153.6 kbps reverse link 1xEV-DOr0 High-speed peak data rates – 2.4 Mbps forward link; 153 kbps reverse link 1xEV-DOrA High-speed peak data rates – 3.1 Mbps forward link; 1.8 Mbps reverse link 1xEV-DOrB 7 High-…
Text truncated - open the document above for the full version.
Dear Sir or Madam: FCC ID: RI7LN931NAG GENERAL DECLARATION We, TELIT COMMUNICATIONS S.p.A. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: RI7LN931NAG If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Yours sincerely ____________________________________ Brian Tucker Senior Vice President of Quality Telit Wireless Solutions, Inc. August 12, 2015 Brian Tucker Tel +1-919-415-1505 Fax +1-919-840-0337 Mobile +1-919-449-8607 E-Mail [email protected] www.telit.com
Dear Sir or Madam: FCC ID: RI7LN931NAG AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize name: Amanda Wu and Title: Senior Specialist) of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by name: Amanda Wu and Title: Senior Specialist) of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Yours sincerely ____________________________________ Brian Tucker Senior Vice President of Quality Telit Wireless Solutions, Inc. August 12, 2015 Brian Tucker Tel +1-919-415-1505 Fax +1-919-840-0337 Mobile +1-919-449-8607 E-Mail [email protected] www.telit.com
Dear Sir or Madam: FCC ID: RI7LN931NAG To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Part list Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Yours sincerely ____________________________________ Brian Tucker Senior Vice President of Quality Telit Wireless Solutions, Inc. August 12, 2015 Brian Tucker Tel +1-919-415-1505 Fax +1-919-840-0337 Mobile +1-919-449-8607 E-Mail [email protected] www.telit.com
Dear Sir or Madam: FCC ID: RI7LN931NAG To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until November 30, 2015 to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Yours sincerely ____________________________________ Brian Tucker Senior Vice President of Quality Telit Wireless Solutions, Inc. August 12, 2015 Brian Tucker Tel +1-919-415-1505 Fax +1-919-840-0337 Mobile +1-919-449-8607 E-Mail [email protected] www.telit.com
FCC ID: RI7LN931NAG Report No.: RF130814E06C Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch September 3, 2015 Dear Application Examiner, Telit Communications S.p.A., Data card, FCC ID: RI7LN931NAG, would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip MDM9615. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is MDM9615. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch
Report No.: 130814E06C 1 of 5 Reference No.: 150803E09 CONSTRUCTION PHOTOS OF EUT Report No.: 130814E06C 3 of 5 Reference No.: 150803E09 Antenna 1 Report No.: 130814E06C 4 of 5 Reference No.: 150803E09 Antenna 2 Report No.: 130814E06C 5 of 5 Reference No.: 150803E09 Antenna 3
(Fig. 1) FCC ID: RI7LN931NAG FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label
Report No.: 130814E06C 2 of 5 Reference No.: 150803E09
Report No.: SA130814E06C 1 of 6 Report Format Version 5.0.0 Reference no. : 131029E04, 150803E09 RF EXPOSURE REPORT REPORT NO.: SA130814E06C MODEL NO.: LN931-NAG FCC ID: RI7LN931NAG RECEIVED: Oct. 29, 2013 TESTED: Oct. 31, 2013 ISSUED: Aug. 14, 2015 APPLICANT: Telit Communications S.p.A. ADDRESS: Via Stazione di Prosecco n. 5/b 34010 Sgonico - Trieste/Italy ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130814E06C 2 of 6 Report Format Version 5.0.0 Reference no. : 131029E04, 150803E09 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM TUNE-UP POWER ................................. 6 Report No.: SA130814E06C 3 of 6 Report Format Version 5.0.0 Reference no. : 131029E04, 150803E09 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130814E06C Original release Aug. 14, 2015 Report No.: SA130814E06C 5 of 6 Report Format Version 5.0.0 Reference no. : 131029E04, 150803E09 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130814E06C 6 of 6 Report Format Version 5.0.0 Reference no. : 131029E04, 150803E09 5. CALCULATION RESULT OF MAXIMUM TUNE-UP POWER Channel Frequency (MHz) Max. Tune-up Power Mode Time-solt Duty Cycle Distance to Human Body (cm) ERP/EIRP value in OTA (mW) ERP/EIRP (dBm) MPE(OTA) value with Time-solt Duty Cycle (dBm) (mW) 836.6 33.00 1995.262 GPRS 12 50% 20.00 3162.3 35 0.516 836.6 28.00 630.957 EDGE 12 50% 20.00 1258.9 31 0.205 826.4 24.50 281.838 WCDMA B5 100% 20.00 530.9 27.3 0.173 836.52 24.60 288.403 1xEVDO Rev.A100% 20.00125.8210.041 824.7 23.80 239.883 Band5 1.4M 100% 20.00 450.8 26.5 0.147 825.5 23.80 239.883 Band5 3M 100% 20.00 476.4 26.8 0.155 826.5 23.80 239.883 Band5 5M 100% 20.00397.2260.130 829 23.80 239.883 Band5 10M 100% 20.00 408.3 26.1 0.133 1909.8 30.00 1000.000 GPRS 12 50% 20.00 1949.8 32.9 0.194 1909.8 26.00 398.107 EDGE 12 50% 20.00 1023.3 30.1 0.102 1880 24.50 281.838 WCDMA B2 100% 20.00 549.5 27.4 0.109 1880 24.00 251.189 1xEVDO Rev.0100% 20.00 572.8 27.6 0.114 1880 23.80 239.883 LTE B2 1.4M100% 20.00 660.7 28.2 0.131 1880 23.80 239.883 LTE B2 3M 100% 20.00 616.6 27.9 0.123 1880 23.80 239.883 LTE B2 5M 100% 20.00 631 28 0.126 1855 23.80 239.883 LTE B2 10M 100% 20.00 562.3 27.5 0.112 1857.5 23.80 239.883 LTE B2 15M 100% 20.00 575.4 27.6 0.114 1860 23.80 239.883 LTE B2 20M 100% 20.00 524.8 27.2 0.104 1850.7 23.80 239.883 LTE B25 1.4M100% 20.00 524.8 27.2 0.104 1851.5 23.80 239.883 LTE B25 3M 100% 20.00 501.2 27 0.100 1860 23.80 239.883 LTE B25 5M 100% 20.00 478.6 26.8 0.095 1855 23.80 239.883 LTE B25 10M100% 20.00 524.8 27.2 0.104 1857.5 23.80 239.883 LTE B25 15M100% 20.00 501.2 27 0.100 1860 23.80 239.883 LTE B25 20M100% 20.00 562.3 27.5 0.112 1732.6 24.50 281.838 WCDMA B4 100% 20.00 354.8 25.5 0.071 1710.7 23.80 239.883 LTE B4 1.4M100% 20.00 616.6 27.9 0.123 1711.5 23.80 239.883 LTE B4 3M 100% 20.00 602.6 27.8 0.120 1712.5 23.80 239.883 LTE B4 5M 100% 20.00 588.8 27.7 0.117 1715 23.80 239.883 LTE B4 10M 100% 20.00 549.5 27.4 0.109 1717.5 23.80 239.883 LTE B4 15M 100% 20.00 489.8 26.9 0.097 1720 23.80 239.883 LTE B4 20M 100% 20.00 467.7 26.7 0.093 784.5 23.40 218.776 LTE B13 5M 100% 20.00 335.0 25.3 0.109 782 23.40 218.776 LTE B13 1…
Text truncated - open the document above for the full version.
Report No.: RF130814E06C 1 of 68 Report Format Version 5.2.0 Reference No.: 150803E09 FCC TEST REPORT (Part 22) REPORT NO.: RF130814E06C MODEL NO.: LN931-NAG FCC ID: RI7LN931NAG RECEIVED: Aug. 14, 2013 TESTED: Sep. 06 to 10, 2013 ISSUED: Aug. 14, 2015 APPLICANT: Telit Communications S.p.A. ADDRESS: Via Stazione di Prosecco n. 5/b 34010 Sgonico - Trieste/Italy ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130814E06C 2 of 68 Report Format Version 5.2.0 Reference No.: 150803E09 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1 CERTIFICATION .......................................................................................................... 4 2 SUMMARY OF TEST RESULTS .................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 5 2.2 TEST SITE AND INSTRUMENTS ................................................................................ 6 3 GENERAL INFORMATION ........................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 8 3.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 10 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................................11 3.4 TEST ITEM AND TEST CONFIGURATION ............................................................... 12 3.5 EUT OPERATING CONDITIONS ............................................................................... 14 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 14 4 TEST TYPES AND RESULTS .................................................................................... 15 4.1 OUTPUT POWER MEASUREMENT ......................................................................... 15 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ....................................................... 15 4.1.2 TEST PROCEDURES ................................................................................................ 15 4.1.3 TEST SETUP ............................................................................................................. 16 4.1.4 TEST RESULTS ......................................................................................................... 17 4.2 FREQUENCY STABILITY MEASUREMENT ............................................................. 24 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .......................................... 24 4.2.2 TEST PROCEDURE .................................................................................................. 24 4.2.3 TEST SETUP ............................................................................................................. 24 4.2.4 TEST RESULTS ......................................................................................................... 25 4.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................. 26 4.3.1 TEST PROCEDURES ................................................................................................ 26 4.3.2 TEST SETUP ............................................................................................................. 26 4.3.3 TEST RESULTS ......................................................................................................... 27 4.4 BAND EDGE MEASUREMENT ................................................................................. 32 4.4.1 LIMITS OF BAND EDGE MEASUREMENT ............................................................... 32 4.4.2 TEST SETUP ............................................................................................................. 32 4.4.3 TEST PROCEDURES ................................................................................................ 32 4.4.4 TEST RESULTS ......................................................................................................... …
Text truncated - open the document above for the full version.
Report No.: RF130814E06C-1 1 of 127 Report Format Version 5.0.0 Reference No.: 150803E09 FCC TEST REPORT (PART 24) REPORT NO.: RF130814E06C-1 MODEL NO.: LN931-NAG FCC ID: RI7LN931NAG RECEIVED: Aug. 14, 2013 TESTED: Sep. 06 to 10, 2013 ISSUED: Aug. 14, 2015 APPLICANT: Telit Communications S.p.A. ADDRESS: Via Stazione di Prosecco n. 5/b 34010 Sgonico - Trieste/Italy ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1) : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2) : No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130814E06C-1 2 of 127 Report Format Version 5.0.0 Reference No.: 150803E09 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 4 1 CERTIFICATION .......................................................................................................... 5 2 SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 6 2.2 TEST SITE AND INSTRUMENTS ................................................................................ 7 3 GENERAL INFORMATION ........................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 9 3.2 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 13 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................... 14 3.4 TEST ITEM AND TEST CONFIGURATION ............................................................... 15 3.5 EUT OPERATING CONDITIONS ............................................................................... 20 3.6 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 20 4 TEST TYPES AND RESULTS .................................................................................... 21 4.1 OUTPUT POWER MEASUREMENT ......................................................................... 21 4.1.1 LIMITS OF OUTPUT POWER MEASUREMENT ....................................................... 21 4.1.2 TEST PROCEDURES ................................................................................................ 21 4.1.3 TEST SETUP ............................................................................................................. 22 4.1.4 TEST RESULTS ......................................................................................................... 23 4.2 FREQUENCY STABILITY MEASUREMENT ............................................................. 40 4.2.1 LIMITS OF FREQUENCY STABILIITY MEASUREMENT .......................................... 40 4.2.2 TEST PROCEDURE .................................................................................................. 40 4.2.3 TEST SETUP ............................................................................................................. 40 4.2.4 TEST RESULTS ......................................................................................................... 41 4.3 OCCUPIED BANDWIDTH MEASUREMENT ............................................................. 43 4.3.1 TEST PROCEDURES ................................................................................................ 43 4.3.2 TEST SETUP ............................................................................................................. 43 4.3.3 TEST RESULTS ......................................................................................................... 44 4.4 PEAK TO AVERAGE RATIO ...................................................................................... 53 4.4.1 LIMITS OF PEAK TO AVERAGE RATIO MEASUREMENT ....................................... 53 4.4.2 TEST SETUP ............................................................................................................. 53 4.4.3 TEST …
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 33 | 27 | 1.72 GHz - 1.75 GHz | 468.00 mW | 18M1G7W | 2.5 ppm |
5G Radio Module
Equipment Class
PCB - PCS Licensed Transmitter5G Radio Module
Equipment Class
CBE - Citizens Band End User DevicesLE910T1-SN
Equipment Class
JBP - Part 15 Class B Computing Device PeripheralME310T1-W1
Equipment Class
PCB - PCS Licensed TransmitterLTE Cat 1 bis module
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral