RI7WE310G4802.11 a/b/g/n WiFi Module+BT combo module

WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 – 2022-11-08 Telit Technical Documentation WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 2 of 48 2022-11-08 Not Subject to NDA APPLICABILITY TABLE PRODUCTS WE310G4-I WE310G4-P WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 3 of 48 2022-11-08 Not Subject to NDA CONTENTS APPLICABILITY TABLE 2 CONTENTS 3 1. INTRODUCTION 6 Scope 6 Audience 6 Contact Information, Support 6 Symbol Convention 6 Related Documents 7 2. GENERAL PRODUCT DESCRIPTION 8 Overview 8 Product Variants and Frequency Bands 8 Block Diagram 9 3. FEATURES 10 Main Features 10 4. PIN ALLOCATION 11 Pin-Out 11 General Purpose I/O 15 SAR ADC Characteristics 15 Pad Layout 16 5. POWER SUPPLY 18 Power Supply Requirements 18 Logic Levels 18 Power Up and Shutdown Sequences 18 Average power consumption 18 WLAN Continuous Tx power consumption 19 6. RF SPECIFICATION 21 Wi-Fi Tx Power 21 Wi-Fi Rx Sensitivity 21 BLE Tx Power 22 BLE Rx Sensitivity 22 WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 4 of 48 2022-11-08 Not Subject to NDA 7. DESIGN GUIDELINES 23 General Digital Interface Recommendations 23 Power supply design guidelines 24 Bypass Capacitors 25 General Design Rules 25 Audio 28 Audio Considerations 29 ESD Characteristics 30 8. MECHANICAL DESIGN 31 WE310G4-I 31 WE310G4-P 32 PCB Pad Design 32 PCB Pad Dimensions 33 Stencil 33 Solder Paste 33 PCB Pad Dimensions 34 9. PACKAGING 35 Tray 35 Moisture sensitivity 36 10. CONFORMITY ASSESSMENT ISSUES 37 Approvals 37 Europe Approvals 37 10.2.1. RED Declaration of Conformity 37 10.2.2. UKCA Declaration of Conformity (TBD) 37 10.2.3. RED / UKCA Antennas 37 FCC/IC Compliance (In progress) 38 11. PRODUCT AND SAFETY INFORMATION 42 Copyrights and Other Notices 42 11.1.1. Copyrights 42 11.1.2. Computer Software Copyrights 42 Usage and Disclosure Restrictions 43 11.2.1. License Agreements 43 11.2.2. Copyrighted Materials 43 11.2.3. High-Risk Materials 43 WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 5 of 48 2022-11-08 Not Subject to NDA 11.2.4. Trademarks 43 11.2.5. Third-Party Rights 43 11.2.6. Waiver of Liability 44 Safety Recommendations 44 12. GLOSSARY 46 13. DOCUMENT HISTORY 47 WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 6 of 48 2022-11-08 Not Subject to NDA 1. INTRODUCTION Scope This document describes electrical specifications, mechanical information, interface application, and manufacturing information about the Telit WE310G4-I/P Wi-Fi/BLE module. With the help of this document and other application notes or user guides, users can understand the Telit WE310G4-I/P Wi-Fi/BLE module well and develop various products quickly. Audience This document is intended for Telit customers, especially system integrators, about to implement their applications using the Telit module. Contact Information, Support For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at:  [email protected]  [email protected]  [email protected]  [email protected] Alternatively, use https://www.telit.com/contact-us. For detailed information about where you can buy the Telit modules or for recommendations on accessories and components, visit https://www.telit.com . We aim to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements. Telit appreciates feedback from the users of our information. Symbol Convention Danger: This information MUST be followed, or catastrophic equipment failure or personal injury may occur. Warning: Alerts the user on important steps about the module integration. Note/Tip: Provides advice and suggestions that may be useful when integrating the module. Electrostatic Discharge: Notifies the user to take proper grounding precautions before handling the product. All dates are in ISO 8601 format, that is. YYYY-MM-DD. WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 7 of 48 2022-11-08 Not Subject to NDA Related Documents  WE310G4-I/P AT Command Reference Guide, 80704ST11102A  WE310G4 - IP Evaluation Board Quick Start Guide, 1VV0301775 WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 8 of 48 2022-11-08 Not Subject to NDA 2. GENERAL PRODUCT DESCRIPTION Overview The WE310G4-I/P is a module with a dual-band (2.4 GHz and 5.0 GHz) and Bluetooth Low Energy (BLE 5.0) combo module that provides an easy and cost-effective way for users to add wireless connectivity to their products. This module is available in two different factors the antenna version named WE310G4-I with 15mmx18mm dimensions and an on- board multilayer antenna and the WE310G4-P with 13.1mmX14.3mm with an antenna pad. The modules have almost same pin-out to except 4 pins (E4, E16, U4, U16). The WE310G4-I version share the same Pinout and are pin-to-pin compatible. These modules are designed to be pin-to-pin compatible with the WE310F5-I family to provide the customer with the same functionalities and features but with RF functionalities enhancements. WE310G4-P version share almost same Pinout to except 4 reserved pins and to supports the same performance as WE310F5 but with RF functionalities enhancements. Product Variants and Frequency Bands The Telit WE310G4 module is available in two variants. To see the details on the differences between the two variants, refer to the figure Product Variants and Frequency Band.  WE310G4-I  WE310G4-P WE310G4-I WE310G4-P Figure 1: Product Variants and Frequency Band WE310G4-I/P Module Hardware User Guide 1VV0301767 Rev. 5 Page 9 of 48 2022-11-08 Not Subject to NDA WE310G4-I/P Note: (EN) The integration of the WE310G4-I/P module within the user application shall be done according to the design rules described in this manual. (IT) L’integrazione del modulo cellulare WE310G4-I/P all’interno dell’applicazione dell’utente dovrà rispettare le indicazioni progettuali descritte in questo manuale. (DE) Die Integration des WE310G4-I/…

Text truncated - open the document above for the full version.

Date: November 7, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Declaration of composite/rated equipment for FCC ID: RI7WE310G4 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Other Class B digital devices & peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

Single Modular Approval Request Letter Date: November 7, 2022 Subject: Single Modular Approval Attestation FCC ID: RI7WE310G4 Dear Reviewer, We, Telit Communications S.p.A., have the 802.11 a/b/g/n WiFi Module+BT combo module approved under single modular approval authorization. The requirements regulated in 47 CFR 15.212 have been fulfilled and clearly explained below. 1. The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. 2. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip RTL8720DF. 3. The requirement of power supply regulation: The part number of the power regulator is RTL8720DF. 4. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. 5. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the stand-alone test configuration. 6. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the user manual of this module. Please also see the exhibition Label Sample. 7. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the Users Manual. 8. The requirement of RF exposure: Please refer exhibition RF Exposure for the compliance of RF exposure rule. Please do not hesitate to contact me for any questions of this request letter. Thank you. Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

Letter of Authorization Date: November 7, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: RI7WE310G4 Product Name: 802.11 a/b/g/n WiFi Module+BT combo module To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Name : Leo Huang Job Title : Director e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

DTS-UNII Declaration Letter Date: November 7, 2022 We have declared below featured for FCC equipment authorization, Device FCC ID: RI7WE310G4 (1) DFS Device -- Master, Client with Radar detection capability, Client without radar detection capability, N/A (2) Active / Passive Scanning, ad hoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) Passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2400–2483.5 Yes , No Yes , No Yes , No Yes , No 5150–5850 Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes, No We don’t provide any controls or software to allow operation outside the USA frequency. (4) Meet 15.202 requirement - Yes, No , Please check below: A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. Sincerely, Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

Confidentiality Request Letter Date: November 7, 2022 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: RI7WE310G4 To whom it may concern: Short-term Confidentiality Pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. Internal Photographs 2. External Photographs 3. User’s manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

Declaration of Multiple Model Date: November 7, 2022 We, Telit Communications S.p.A., hereby declare under our responsibility that the following products are electrically identical except for the difference below. FCC ID: RI7WE310G4 Product Name: 802.11 a/b/g/n WiFi Module+BT combo module Model Difference WE310G4-I Module with integrated SMD antenna WE310G4-P Module without integrated SMD antenna The models listed above are identical in circuitry and electrical, mechanical and physical construction. Detailed contact information for this declaration has been listed below as the window of any issues relevant for this declaration. Sincerely, Applicant : Telit Communications S.p.A. Address : Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Signature : _________________________________ Name : Brian Tucker E-mail : [email protected] Tel. : +1-919-439-7977

PHOTOGRAPHS OF EUT EP261411 Sporton International Inc. Page No. : 2 of 4 Report Template No.: SE Ver 1.0_EP Issued Date : 11/Nov/2022 Report Version : 01 WE310G4-P PHOTOGRAPHS OF EUT EP261411 Sporton International Inc. Page No. : 4 of 4 Report Template No.: SE Ver 1.0_EP Issued Date : 11/Nov/2022 Report Version : 01 ─────THE END───── WE310G4-I

Label and Location Information EUT (Affix to the shielding case)

PHOTOGRAPHS OF EUT EP261411 Sporton International Inc. Page No. : 1 of 4 Report Template No.: SE Ver 1.0_EP Issued Date : 11/Nov/2022 Report Version : 01 WE310G4-P PHOTOGRAPHS OF EUT EP261411 Sporton International Inc. Page No. : 3 of 4 Report Template No.: SE Ver 1.0_EP Issued Date : 11/Nov/2022 Report Version : 01 WE310G4-I

Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 1 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: RI7WE310G4 Radio Exposure Evaluation Report FCC ID : RI7WE310G4 Equipment : 802.11 a/b/g/n WiFi Module+BT combo module Brand Name : Model Name : WE310G4-I, WE310G4-P Applicant : Telit Communications S.p.A. Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Manufacturer : Telit Communications S.p.A. Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Standard : 47 CFR FCC Part 2 Subpart J, section 2.1091 The product was received on Jun. 14, 2022, and testing was started from Jul. 26, 2022 and completed on Sep. 28, 2022. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in 47 CFR FCC Part 2 Subpart J, section 2.1091 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Ben Tseng __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 2 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: RI7WE310G4 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 6 1.3 Testing Location ..................................................................................................................................... 6 2 MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 7 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 7 2.2 RF Exposure Exempt Measurement ...................................................................................................... 7 2.3 Multiple RF Sources Exposure ............................................................................................................... 8 2.4 MPE Calculation Method ........................................................................................................................ 9 2.5 Calculated Result and Limit .................................................................................................................... 9 Photographs of EUT V01 Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 3 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: RI7WE310G4 History of this test report Report No. Version Description Issued Date FA261411 01 Initial issue of report Nov. 11, 2022 Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 4 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: RI7WE310G4 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None Reviewed by: Ryan Hsiao Report Producer: Ann Hou Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 5 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: RI7WE310G4 1 General Description 1.1 Information 1.1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 5GHz WLAN 5150-5250 5250-5350 5470-5725 5725-5850 5180-5240 5260-5320 5500-5700 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Bluetooth 2400-2483.5 2402-2480 LE: DSSS (GFSK) 1.1.2 Antenna Information Ant. Brand Model Name Antenna Type Connector Remark 1 Atel-Antennas T-AT9552 Dipole Reverse SMA WE310G4-P 2 AMOTECH Co., Ltd AMOC42H12F7PA Dielectric Chip Antenna N/A WE310G4-I Ant. Port Gain (dBi) 2.4G 5150MHz 5500 MHz 5850MHz BT 1 1 2.5 4.5 4.5 4.5 2.5 2 1 2.28 3.34 3.21 3.15 2.28 Note 1: The EUT has two antennas. For 2.4GHz function: For IEEE 802.11 b/g/n mode (1TX/1RX) Ant. 1 (port 1) or Ant. 2 (port 1) could transmit/receive. For BT function: For IEEE 802.15.1 Bluetooth mode (1TX/1RX) Ant. 1 (port 1) or Ant. 2 (port 1) could transmit/receive. For 5GHz function: For IEEE 802.11 a/n mode (1TX/1RX) Ant. 1 (port 1) or Ant. 2 (port 1) could transmit/receive. Radio Exposure Evaluation Report Report No. : FA261411 TEL : 886-3-327-3456 Page Number : 6 of 9 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-A1 Ver5.0 Report Version : …

Text truncated - open the document above for the full version.

FCC DFS Test Report Report No. : FZ261411 TEL : 886-3-327-3456 Page Number : 1 of 22 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-D2 Ver3.2 Report Version : 01 FCC ID : RI7WE310G4 FCC DFS Test Report FCC ID : RI7WE310G4 Equipment : 802.11 a/b/g/n WiFi Module+BT combo module Brand Name : Model Name : WE310G4-I, WE310G4-P Applicant : Telit Communications S.p.A. Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Manufacturer : Telit Communications S.p.A. Viale Stazione di Prosecco 5/b, Trieste 34010, Italy Standard : 47 CFR FCC Part 15.407 The product was received on Jun. 14, 2022, and testing was started from Oct. 11, 2022 and completed on Oct. 11, 2022. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Ben Tseng __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC DFS Test Report Report No. : FZ261411 TEL : 886-3-327-3456 Page Number : 2 of 22 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-D2 Ver3.2 Report Version : 01 FCC ID : RI7WE310G4 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 7 1.3 Testing Location Information .................................................................................................................. 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 Test Channel Frequencies Configuration ............................................................................................... 8 2.2 The Worst Case Measurement Configuration ........................................................................................ 8 2.3 Support Equipment ................................................................................................................................. 8 3 DYNAMIC FREQUENCY SELECTION (DFS) TEST RESULT ............................................................. 9 3.1 General DFS Information ....................................................................................................................... 9 3.2 Radar Test Waveform Calibration ........................................................................................................ 11 3.3 In-service Monitoring ............................................................................................................................ 16 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 21 5 MEASUREMENT UNCERTAINTY ...................................................................................................... 22 Appendix A. Test Photos Photographs of EUT V01 FCC DFS Test Report Report No. : FZ261411 TEL : 886-3-327-3456 Page Number : 3 of 22 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-D2 Ver3.2 Report Version : 01 FCC ID : RI7WE310G4 History of this test report Report No. Version Description Issued Date FZ261411 01 Initial issue of report Nov. 11, 2022 FCC DFS Test Report Report No. : FZ261411 TEL : 886-3-327-3456 Page Number : 4 of 22 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-D2 Ver3.2 Report Version : 01 FCC ID : RI7WE310G4 Summary of Test Result Report Clause Ref. Std. Clause Test Items Result (PASS/FAIL) Remark 3.3 KDB 905462 7.8.3 DFS: In-Service Monitoring for Channel Move Time (CMT) PASS CMT ≤ 10sec 3.3 KDB 905462 7.8.3 DFS: In-Service Monitoring for Channel Closing Transmission Time (CCTT) PASS CCTT ≤ 60 ms starting at CMT 200ms 3.3 KDB 905462 7.8.3 DFS: In-Service Monitoring for Non-Occupancy Period (NOP) PASS NOP ≥ 30 min Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and explanations: None Reviewed by: Ryan Hsiao Report Producer: Ann Hou FCC DFS Test Report Report No. : FZ261411 TEL : 886-3-327-3456 Page Number : 5 of 22 FAX : 886-3-327-0973 Issued Date : Nov. 11, 2022 Report Template No.: HE1-D2 Ver3.2 Report Version : 01 FCC ID : RI7WE310G4 1 General Description 1.1 Information 1.1.1 RF General Information Specification Items Description Product Type WLAN (1TX, 1RX) Radio Type Intentional Transceiver Power Type From Host system (USB) Modulation IEEE 802.11a: OFDM (BPSK / QPSK / 16QAM / 64QAM) IEEE 802.11n: see the below table Data Rate (Mbps) IEEE 802.11a: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: see the below table Channel Bandwidth 20/40 MHz operating channel bandwidth Operating Mode Master Client with radar detection Client without radar detection Communication Mode IP Based (Load Based) Frame Based TPC Function With TPC …

Text truncated - open the document above for the full version.

T-AT9552 SPECIFICATIONS Colour Black Net weight ( g ) 27±10 Dimensions ( mm ) Lenght 160 Widht 22 Diameter 10 Temperature ( °C ) -40° - +70° TECHNICAL DATA WIRELESS LAN Antenna type Equipment for terminal Frequency range 2400 ÷ 2500MHz 4900 ÷ 5925MHz Impedance ( Ohms ) 50 Max power ( W ) 50 V.S.W.R. 2400 ÷ 2500MHz Less than 2.2 V.S.W.R. 4900 ÷ 5925MHzLess than 2.2 Polarization Vertical Emission Omnidirectional Gain ( dBi ) 2400 ÷ 2500MHz2.5 Gain ( dBi) 4900 ÷ 5925MHz 4.5 Connector SMA m WIRELESS LAN DUALBAND 2.4-5.8GHz with SMA M. 2.4GHz 5.5GHz T-AT9552 WIRELESS LAN DUALBAND 2.4-5.8GHz with SMA M. 2.4GHz 5.8GHz

Application WLAN Dual-band(2.4GHz/5GHz) Features PIFA Structure Small Size (4.0*2.0*1.2mm 3 ) Easy Optimizing with external matching circuit SMT Available under Pb-free Condition RoHSCompliant DATASHEET DocumentDatasheet TypeDielectricChip Antenna ApplicationDualWLAN Part No.AMOC42H12F7PA Revision1.1 Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. AMOTECH Datasheet / Dielectric Chip Antenna / Dual WLAN AMOC42H12F7PA (Rev 1.1) 2 Rev. NoDateTitleContentsPage 018.05.15New Published 1 21.09.13Addmark for manufacturing 1.121.11.11 Add bottom patterndimensionof antenna 3 Table of Content Revision History 1.Specifications 3 1.1 Electrical Specifications 3 1.2 Mechanical Specifications 3 1.3 Appearance and Material 3 2. PCB Design for Test 4 2.1 Evaluation BoardDimension 4 2.2 PCB Design Guide 4 3. Measurement Result 5 3.1 Typical Measurement Result (VSWR/RL,Smithchart) 5 3.2 Typical Measurement Result(Gain, Radiation Pattern) 6 4. Reliability 8 5. Soldering Reflow Profile 8 6. Packaging 9 6.1 Carrier Tape Dimension 9 6.2 PackagingQuantity 9 6.3 Packaging Label 9 Datasheet / Dielectric Chip Antenna / Dual WLAN AMOC42H12F7PA (Rev 1.1) 3 NoItem SpecificationRemark 1Frequency Range [GHz] 2.400 ~2.485 / 5.150~5.875 2VSWR Max3.0 : 1 3Avg. Gain [dBi] 2.400GHz -2.2 MeasuredData (on the EVB) 2.442GHz -1.2 2.485GHz-1.6 5.150GHz-1.6 5.500GHz-1.6 5.850GHz-1.1 4Peak. Gain [dBi] 2.400GHz 0.7 2.442GHz 2.3 2.485GHz1.7 5.150GHz3.3 5.500GHz3.2 5.850GHz3.2 5PolarizationLinear 6Impedance [Ω]Nominal 50 The results are measured on the 50 x 50 mm 2 evaluation board(EVB). See Page 6,7. for more detail gain parameter NoItemSpec.Remark 1Dimensions (L x W x H)4.0 x 2.0 x 1.2 mm 3 2Unit Weighttyp. 35 mg 3Operating Temperature-40 ~ +125 °C 1.1 Electrical Specifications 1.2 Mechanical Specifications NoItemFunctionMaterial ① Marking Feeding Index Ink ② ElectrodeRadiation ElementAg ③ Ceramic Body - Ceramic 1.3 Appearance & Material 1. Specifications ② ③ ① Top & Side Bottom Tolerance : ±0.15 [unit : mm] Datasheet / Dielectric Chip Antenna / Dual WLAN AMOC42H12F7PA (Rev 1.1) 4 ② ③ ① 2.1 Evaluation Board Dimension 2.2 PCB Design Guide 2. PCB Design for Test Matching Component [unit : mm] Evaluation board size ~ 50 x 50 mm Fill Cut Area (GND Clearance) ~ 12.0 x 4.8 mm [PCB Solder Land] RF Cable GND 50 Ohm Feeding Line NoPin Assignment ① Feeding ②GND ③ GND Datasheet / Dielectric Chip Antenna / Dual WLAN AMOC42H12F7PA (Rev 1.1) 5 3.1 Typical Measurement Result (VSWR/RL, Smith chart) 3. Measurement Result The results are measured on the 50x50mm 2 evaluation board(EVB). No Matching Value ① 6.8nH ② 100pF ③ N/C ④ 1.5nH ⑤ 5.6pF ⑥ 1.5nH ② ④ ① ③ ⑤ ⑥ Measured VSWR and Return-lossMeasured Smith Chart Datasheet…

Text truncated - open the document above for the full version.