RI7ZE51WIRELESS MODULE 2.4GHZ ZE51

ZE51/61-2.4 RF Module User Guide 1VV0300868 Rev.4 – 31/03/2011 ZE51/61-2.4 RF module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 2 of 50 This document is related to the following product : ZE51/61-2.4 RF Module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 3 of 50 DISCLAIMER The information contained in this document is the proprietary information of Telit Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited. Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, Telit does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. Telit disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules. Telit reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document. Copyright: Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights are reserved. © Copyright Telit RF Technologies 2011. ZE51/61-2.4 RF module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 4 of 50 CONTENTS CHAPTER I. INTRODUCTION ................................................................................................................... 6 I.1. AIM OF THE DOCUMENT .................................................................................................................................................................................... 6 I.2. REFERENCE DOCUMENTS ................................................................................................................................................................................. 7 I.3. DOCUMENT CHANGE LOG ................................................................................................................................................................................. 7 I.4. GLOSSARY ...................................................................................................................................................................................................... 8 CHAPTER II. REQUIREMENTS ................................................................................................................ 9 II.1. REGULATIONS REQUIREMENTS ........................................................................................................................................................................ 9 II.2. FUNCTIONAL REQUIREMENTS........................................................................................................................................................................ 12 II.3. SOFTWARE .................................................................................................................................................................................................. 12 II.4. TEMPERATURE REQUIREMENTS .................................................................................................................................................................... 13 CHAPTER III. GENERAL CHARACTERISTICS ...................................................................................... 14 III.1. MECHANICAL CHARACTERISTICS ................................................................................................................................................................. 14 III.2. MECHANICAL DIMENSIONS ........................................................................................................................................................................... 15 III.3. DC CHARACTERISTICS ................................................................................................................................................................................ 16 III.4. FUNCTIONAL CHARACTERISTICS .................................................................................................................................................................. 17 III.5. DIGITAL CHARACTERISTICS ......................................................................................................................................................................... 20 III.6. ABSOLUTE MAXIMUM RATINGS .................................................................................................................................................................... 21 III.7. ORDERING INFORMATION ............................................................................................................................................................................ 22 CHAPTER IV. TECHNICAL DESCRIPTION ............................................................................................ 23 IV.1. PIN-OUT OF THE SMD MODULE ........................................................................................................…

Text truncated - open the document above for the full version.

RF_734_00, Issue 1 Modular Approval Request FCC (per DA 00-1407) FCC ID: RI7ZE51 Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, it has its own RF shielding 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, it does have it 3. The modular transmitter must have its own power supply regulation. Yes 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. Yes, the modular transmitter complies with these requirements 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes. The modular transmitter was tested in a stand-alone configuration 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Yes. The applicant agrees with this 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes. It can be see in the operational description 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, the modular transmitter complies with the RF exposure requirements Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or Name and surname of applicant (or Name and surname of applicant (or Name and surname of applicant (or authorized authorizedauthorized authorized representative): representative): representative): representative): Sabina Ruiz Sabina RuizSabina Ruiz Sabina Ruiz Date: Date: Date: Date: March 29, 2011 March 29, 2011March 29, 2011 March 29, 2011 Signature: Signature: Signature: Signature: P.A. P.A.P.A. P.A.

LABEL LAYOUT SPECIFICATION Telit Documentation Center 2001702016 DEVICE LABEL FOR ZExx MODULES Rev. 8 22/03/11 5 2 10 1 4 A 6 0 5 8 7 3 9 11 Label data Raw label code : 1vv0200524 Size : 20x11 mm The only purpose of this document is to show the layout . Do not use any part of it for the composition of the real label LAYOUT DESCRIPTION: 1) Telit logo (6x3mm) (File telit.bmp) 2) Clear writing of text reported on row 0005 of Master BOM followed by “–“ Font DIN-Bold 4pt 3) Clear writing of text reported on row 0010 of Master BOM Font DIN-Bold 4pt 4) Clear writing of text reported on row 0080 of Master BOM Font DIN-Bold 4pt 5) Clear writing and Barcode type 2D datamatrix of ID number formatted as indicated on P32-EN Product ID number allocation document. Offset between (ref.0) point and barcode upper left corner (ref.A) x=8mm y=2mm tolerance xy +/-0.5mm. Font DIN-Bold 4pt Barcode max size 4,5x4,5mm Barcode multiplier 3x3 Tolerance xy +/- 0.5mm NOTE: The ID NUMBER included in the 2D Barcode, MUST be free of "-" (DASH) characters when provided and all digits must be contiguous without spaces. The ID NUMBER in CLEAR WRITING format MUST includes the "-" (DASH) characters as given in the P32EN document. 6) Clear writing of text reported on row 0085 of Master BOM Font DIN-Bold 3pt 7) Clear writing of string “S/N:” Font DIN-Bold 3pt 8) Clear writing of serial device number formatted as following: TTRYWWXXXXX+ where: TTR is reported on row 0044 of Master BOM Y = year of manufacturing in 1 letter (K=2011, L=2012 etc...) WW = week of manufacturing in 2 digits (01 ... 52) XXXXX = board progressive number with 5 digits, reset to 00001 every new week + = RoHS Font DIN-Bold 3pt 9) Write the name of production country : "Made in______” Font DIN-Bold 3pt 10) Clear writing of text reported on row 0030 of Master BOM Font DIN-Bold 3pt 11) Clear writing of text reported on row 0035 of Master BOM Font DIN-Bold 3pt NOTE: If in Master BOM the lines to which reference is done on layout specification don't exist, the field on the label is not applicable and therefore must not be filled.

ZE51/61-2.4 RF Module User Guide 1VV0300868 Rev.4 – 31/03/2011 ZE51/61-2.4 RF module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 2 of 50 This document is related to the following product : ZE51/61-2.4 RF Module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 3 of 50 DISCLAIMER The information contained in this document is the proprietary information of Telit Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited. Telit makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, Telit does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. Telit disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules. Telit reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document. Copyright: Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights are reserved. © Copyright Telit RF Technologies 2011. ZE51/61-2.4 RF module User Guide 1VV0300868 Rev.4 – 31/03/2011 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 4 of 50 CONTENTS CHAPTER I. INTRODUCTION ................................................................................................................... 6 I.1. AIM OF THE DOCUMENT .................................................................................................................................................................................... 6 I.2. REFERENCE DOCUMENTS ................................................................................................................................................................................. 7 I.3. DOCUMENT CHANGE LOG ................................................................................................................................................................................. 7 I.4. GLOSSARY ...................................................................................................................................................................................................... 8 CHAPTER II. REQUIREMENTS ................................................................................................................ 9 II.1. REGULATIONS REQUIREMENTS ........................................................................................................................................................................ 9 II.2. FUNCTIONAL REQUIREMENTS........................................................................................................................................................................ 12 II.3. SOFTWARE .................................................................................................................................................................................................. 12 II.4. TEMPERATURE REQUIREMENTS .................................................................................................................................................................... 13 CHAPTER III. GENERAL CHARACTERISTICS ...................................................................................... 14 III.1. MECHANICAL CHARACTERISTICS ................................................................................................................................................................. 14 III.2. MECHANICAL DIMENSIONS ........................................................................................................................................................................... 15 III.3. DC CHARACTERISTICS ................................................................................................................................................................................ 16 III.4. FUNCTIONAL CHARACTERISTICS .................................................................................................................................................................. 17 III.5. DIGITAL CHARACTERISTICS ......................................................................................................................................................................... 20 III.6. ABSOLUTE MAXIMUM RATINGS .................................................................................................................................................................... 21 III.7. ORDERING INFORMATION ............................................................................................................................................................................ 22 CHAPTER IV. TECHNICAL DESCRIPTION ............................................................................................ 23 IV.1. PIN-OUT OF THE SMD MODULE ........................................................................................................…

Text truncated - open the document above for the full version.

Telefication BV Edisonstraat 12A Zevenaar 6902 PK The Netherlands RF exposure analysis for the equipment ZE51-2.4 (FCC ID: RI7ZE51) The device ZE51-2.4 is designed to be used only in mobile exposure conditions (antenna to user distance higher than 20 cm). The antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The output power of the device is extremely low (97.38 dBμV/m @ 3 m, equivalent to 5.1 mW) and far below the 60/f(GHz) mW (60/2.45 mW = 24.48 mW) threshold. For that reason the equipment is categorically excluded from routine environmental evaluation for RF exposure and it is deemed to comply with FCC limits for exposure to electromagnetic fields.

ReportNº(NIE):32032RET.003Page1of3220110330 FCC LISTED, REGISTRATION NUMBER: 905266 IC LISTED REGISTRATION NUMBER IC 4621A-1   AT4 wireless, S.A. ParqueTecnológicodeAndalucía, c/SeveroOchoanº2 29590Campanillas/Málaga/España Tel.952619100Fax952619113 MÁLAGA,C.I.F.A29507456 RegistroMercantildeMálaga,Tomo1169, Libro82,Folio133,HojaMA3729  TEST REPORT REFERENCE STANDARD: USA FCC Part 15.247, 15.109 CANADA RSS-210, RSS-Gen Radio Frequency Devices. Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. Licence-Exempt Radio Apparatus (All Frequency Bands): Category I Equipment. General Requirements and Information for the Certification of Radio Apparatus. NIE........................................................ : 32032RET.003 Approvedby (name/position&signature) ............... : A.Llamas/RFLab.Manager  .......................................................... Elaborationdate.................................... :20110330 Identification of item tested................ : WIRELESSMODULE2.4GHz Trademark ............................................ :TELIT Modeland/ortypereference................. :ZE512.4 Serialnumber........................................ :FRCJ1000038 Otheridentificationoftheproduct........ :Commercialname:ZE512.4 HWversion:RevC1/SWversion:1.02 FCCID:RI7ZE51  ICID:5131AZE51 Features ................................................. :ZigBeemodulewithintegratedantenna Description ............................................ :ZigBeemoduleintegratedantenna Applicant ............................................. : TelitCommunicationsS.p.A. Address.................................................. :ViaStazionediProsecco,5/B34010SGONICO(TRIESTE)–ITALY CIF/NIF/Passport...................................: Contactperson:XavierTATOPOULOS Telephone/Fax ..................................... :+33.(0)4.97.21.33.18/+33.(0)4.97.21.33.11 email:................................................... :[email protected] Test samples supplier ......................... : Sameasapplicant Manufacturer...................................... : TELITRFTECHNOLOGIESSAS Address.................................................. : RueEvaristeGaloisEmeraldSquareBâtimentD,SophiaAntipolis, FRANCE Contactperson:XavierTATOPOULOS([email protected]) Telephone/Fax ..................................... :+33.(0)4.97.21.33.18/+33.(0)4.97.21.33.11 ReportNº(NIE):32032RET.003Page2of3220110330 Test method requested ........................: SeeStandard Standard ................................................:USAFCCPart15.247100109Edition:Operationwithinthebands902 928MHz,24002483.5MHz,and57255850MHz: Section15.247Subclause(b).Maximumoutputpowerandantennagain. Section15.247Subclause(d).Bandedgeemissionscompliance (Transmitter). Section15.247Subclause(d).Emissionsradiated(Transmitter). USAFCCPart15.109:Receiverradiatedemission. CANADARSS210Issue8(December2010). CANADARSSGenIssue3(December2010). GuidelinesformeasurementofDigitalTransmissionSystemsoperating undersection15.247datedMarch23,2005. ANSIC63.102009:AmericanNationalStandardforTestingUnlicensed WirelessDevices. Testprocedure.......................................:PEET034:Medidasradioeléctricasaequiposderadiodeespectro ensanchadoenlabandade2,4GHz. Nonstandardizedtestmethod ...............:N/A Usedinstrumentation.............................:   LastCal.dateCal.duedate 1. SemianechoicAbsorberLinedChamber IR11.BS N.A.N.A. 2.ControlChamberIR12.BCN.A.N.A. 3. Hybrid Bilog antenna Sunol Sciences CorporationJB6 2008/102011/10 4.AntennamastEM1072NMTN.A.N.A. 5.RotatingtableEM10844.ONN.A.N.A. 6. Doubleridge Guide Hornantenna118 GHzHP11966E 2008/032011/03 7. Doubleridge Guide Horn antenna 18 40GHzAgilent119665J 2008/092011/09 8.EMITestReceiverR&SESIB262009/092011/09 9. RF preamplifier Miteq JS412002600 305A. 2010/072012/07 10.MultiDeviceControllerEMCO2090N.A.N.A. 11.SpectrumAnalyzerAgilentE4440A2010/022012/02 12. RFpreamplifierMiteqAFS5 040013001510P6. 2010/072012/07 13.RFpreamplifierSchaffnerCPA9231.2009/032011/03   Report template No. .............................: FDT08_12 IMPORTANT:Nopartsofthisreportmaybereproducedorquotedoutofcontext,inanyformorbyanymeans,exceptinfull,withouttheprevious writtenpermissionofAT4wireless,S.A.  ReportNº(NIE):32032RET.003Page3of3220110330    INDEX  Competencesandguarantees ................................................................................................................ 4 Generalconditions ................................................................................................................................ 4 Uncertainty............................................................................................................................................ 4 Usageofsamples................................................................................................................................... 4 Testingperiod ....................................................................................................................................... 4 Environmentalconditions ..................................................................................................................... 5 Summary ............................................................................................................................................... 6 Remarksandcomments ..............................................................…

Text truncated - open the document above for the full version.

ReportNº(NIE):32032RET.002Page1of4920110330 FCC LISTED, REGISTRATION NUMBER: 905266 IC LISTED REGISTRATION NUMBER IC 4621A-1   AT4 wireless, S.A. ParqueTecnológicodeAndalucía, c/SeveroOchoanº2 29590Campanillas/Málaga/España Tel.952619100Fax952619113 MÁLAGA,C.I.F.A29507456 RegistroMercantildeMálaga,Tomo1169, Libro82,Folio133,HojaMA3729  TEST REPORT REFERENCE STANDARD: USA FCC Part 15.247, 15.109 CANADA RSS-210, RSS-Gen Radio Frequency Devices. Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. Licence-Exempt Radio Apparatus (All Frequency Bands): Category I Equipment. General Requirements and Information for the Certification of Radio Apparatus. NIE........................................................ : 32032RET.002 Approvedby (name/position&signature) ............... : A.Llamas/RFLab.Manager  ..........................................................  Elaborationdate.................................... :20110330 Identification of item tested................ : WIRELESSMODULE2.4GHz Trademark ............................................ :TELIT Modeland/ortypereference................. :ZE512.4 Serialnumber........................................ :FSCJ1000012 Otheridentificationoftheproduct........ :Commercialname:ZE512.4 HWversion:RevC1/SWversion:1.02 FCCID:RI7ZE51 ICID:5131AZE51 Features ................................................. :ZigBeemodulewithexternal5dBigainattachableantenna Description ............................................ :ZigBeeModuleexternalantenna Applicant ............................................. : TelitCommunicationsS.p.A. Address.................................................. :ViaStazionediProsecco,5/B34010SGONICO(TRIESTE)–ITALY CIF/NIF/Passport...................................: Contactperson:XavierTATOPOULOS Telephone/Fax ..................................... :+33.(0)4.97.21.33.18/+33.(0)4.97.21.33.11 email:................................................... :[email protected] Test samples supplier ......................... : Sameasapplicant Manufacturer...................................... : TELITRFTECHNOLOGIESSAS Address.................................................. : RueEvaristeGaloisEmeraldSquareBâtimentD,SophiaAntipolis, FRANCE Contactperson:XavierTATOPOULOS([email protected]) Telephone/Fax ..................................... :+33.(0)4.97.21.33.18/+33.(0)4.97.21.33.11 ReportNº(NIE):32032RET.002Page2of4920110330 Test method requested ........................: SeeStandard Standard ................................................:USAFCCPart15.247100109Edition:Operationwithinthebands902 928MHz,24002483.5MHz,and57255850MHz. USAFCCPart15.109:Receiverradiatedemission. CANADARSS210Issue8(December2010). CANADARSSGenIssue3(December2010). GuidelinesformeasurementofDigitalTransmissionSystemsoperating undersection15.247datedMarch23,2005. ANSIC63.102009:AmericanNationalStandardforTestingUnlicensed WirelessDevices. Testprocedure.......................................:PEET034:Medidasradioeléctricasaequiposderadiodeespectro ensanchadoenlabandade2,4GHz. Nonstandardizedtestmethod ...............:N/A Usedinstrumentation.............................:  ConductedMeasurements  LastCal.dateCal.duedate 1. SpectrumanalyserAgilentPSA E4440A 2010/022012/02 2.DCpowersupplyR&SNGPE40/402008/112011/11  RadiatedMeasurements  LastCal.dateCal.duedate 1. SemianechoicAbsorberLinedChamber IR11.BS N.A.N.A. 2.ControlChamberIR12.BCN.A.N.A. 3. Hybrid Bilog antenna Sunol Sciences CorporationJB6 2008/102011/10 4.AntennamastEM1072NMTN.A.N.A. 5.RotatingtableEM10844.ONN.A.N.A. 6. Doubleridge Guide Hornantenna118 GHzHP11966E 2008/032011/03 7. Doubleridge Guide Horn antenna 18 40GHzAgilent119665J 2008/092011/09 8.EMITestReceiverR&SESIB262009/092011/09 9. RF preamplifier Miteq JS412002600 305A. 2010/072012/07 10.MultiDeviceControllerEMCO2090N.A.N.A. 11.SpectrumAnalyzerAgilentE4440A2010/022012/02 12. RFpreamplifierMiteqAFS5 040013001510P6. 2010/072012/07 13.RFpreamplifierSchaffnerCPA9231.2009/032011/03   Report template No. .............................: FDT08_12 IMPORTANT:Nopartsofthisreportmaybereproducedorquotedoutofcontext,inanyformorbyanymeans,exceptinfull,w…

Text truncated - open the document above for the full version.