RKIC51-A04108-XXBluetooth Stereo Headphone

www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 10 of 27 1.6 User Manual (Cover) i.Tech BlueBAND User Guide (Version 1 – 28-Apr-2005) www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 11 of 27 (Page 0) Contents i.Tech BlueBAND Overview...................................................................2 Getting Started..................................................................................3 Charging Your Earphone......................................................................4-5 Nominal Charging Time..................................................................5 Talk & Standby Time...................................................................5 Low Battery.................................................................................5 Turning Your Earphone On and Off..........................................................6 Pairing Your Earphone......................................................................7-8 Using Your Earphone........................................................................9-10 Answering a Call...........................................................................9 Answering a Call when Listening to Stereo Audio....................................9 Ending a Call................................................................................9 Rejecting a Call.............................................................................9 Dialing from Your Mobile Handset......................................................9 Voice Dialing from Your Earphone.................................................10 Last Number Redialing from Your Earphone....................................10 Listening to Stereo Audio fromYour PC / Device...................................10 Adjusting the Volume...........................................................................11 Resetting / Removing the Pairing ............................................................11 Care and Maintenance.....................................................................12-13 Safety Information..............................................................................14 Troubleshooting..................................................................................15 Product Specifications..........................................................................16 www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 12 of 27 (Page 1) i.Tech BlueBAND Overview Fig. 1 (Right Channel Earphone) Fig. 2 (Left Channel Earphone) Getting Started To use your i.Tech BlueBAND earphone (“Earphone”), please follow these simple steps: — Charge your earphone — Pair your earphone with a Bluetooth-enabled mobile handset or music player Built-in rechargeable battery Dual color LED Indicator Multifunction Button (MFB) Volume Key (+) Volume Key (-) Right Audio Channel Left Audio Earphone Charging Socket Adjustable-pitch Arm www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 13 of 27 ( Page 2) Wearing Your i.Tech BlueBAND Fig. 3 Wearing your Earphone www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 14 of 27 Page 3 Charging Your Earphone Fig. 4 The Earphone comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time. www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 15 of 27 Page 5 Charging Your Earphone Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The LED will be red while charging. IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Nominal Charging Time Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue and remains on for 30 minutes. Disconnect the charger from AC wall outlet and the headset. Press and hold the MFB (fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Earphone On and Off” on the next page. For pairing, please refer to “Pairing your earphone”. Talk & Standby Time The fully charged battery offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in progress, the headset remains turned on in standby mode. Low Battery When the headset is on and the battery becomes low, the LED flashes red and the headset emits a beep every 1 minute. Please recharge the battery as described above. www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 16 of 27 Page 6 Turning Your Earphone On and Off Turning On the Earphone Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue. IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Earphone” on page 7-8. Turning Off the Earphone Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops. IMPORTANT To disconnect the Bluetooth connection, please firstly turn of your headset by pressing the MFB key. www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 17 of 27 Page 7 Pairing Your Earphone Prior to using your Earphone for the first time, you must pair it with a Bluetooth-enabled mobile handset or Music Player (The “Device”). The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset or music player. Earphone pairing procedure is subject to different models of mobile handsets and music player. Up to 1 meter www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 18 of 27 Page 8 Pairing Your Earphone 1. Place the Earphone and the device where they are easily viewable by no more than 1 meter apart. 2. Ensure the earphone is OFF. 3. Press and hold the MFB until the earphone LED alternately flashes blue and red. 4. Activate your mobile handset’s Bluetooth function by referring to your mobile …

Text truncated - open the document above for the full version.

www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 1 of 6 Appendix 3 Construction Photos www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 2 of 6 1.1 External view 1.1.1 Front view www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 3 of 6 1.1.2 Side view 1 www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 4 of 6 1.1.3 Side view 2

www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 2 of 27 1.1 FCCID Label Artwork FCC Statement Label www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 3 of 27 The picture shows the location of the Rating Label.

www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 5 of 7 1.2 Internal view 1.2.1 Front side 1 The yellow circle indicates the location of the antenna. www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 6 of 7 1.2.2 Front side 2 www.tuv.com Test Report No.: 14008929 001 Appendix 3 page 7 of 7 1.2.3 Front side 3

www.tuv.com Test Report No.: 14008928 001 Appendix 4 page 4 of 27 1.2 Operational Descriptions 1.2.1 Product Descriptions The test item is a Stereo Headphone based on the Bluetooth technology specification 1.2. It transfers the audio signal from the audio port to a corresponding Bluetooth Headset wirelessly. Bluetooth is a short-range radio link intended to be a cable replacement between portable and/or fixed electronic devices. Transmitter Receiver Operating frequency range 2402 - 2480 MHz 2402 - 2480 MHz Type of modulation FHSS modulation FHSS modulation Number of channels 79 79 Channel separation 1 MHz 1 MHz Type of antenna Dielectric Chip Antenna soldered to the circuit board Dielectric Chip Antenna soldered to the circuit board Antenna gain (dBi) 0 0 Power level fix fix Type of equipment stand alone, plug-in radio device stand alone, plug-in radio device Connection to public utility power line No No Nominal voltage V nor : 3.9 V V nor : 3.9 V Independent Operation Modes Page scan Inquiry scan Connection state - ACL Link Connection state - SCO Link 1.2.2 Technical Background of the Wireless Technology Bluetooth operates in the unlicensed ISM band at 2.4 GHz. A frequency hop transceiver is applied to combat interference and fading. A shaped, binary FM modulation is applied to minimize transceiver complexity. The symbol rate is 1 Ms/s. A slotted channel is applied with a nominal slot length of 625 μs. For full duplex transmission, a Time-Division Duplex (TDD) scheme is used. On the channel, information is exchanged through packets. Each packet is transmitted on a different hop frequency. A packet nominally covers a single slot, but can be extended to cover up to five slots. The Bluetooth protocol uses a combination of circuit and packet switching. Slots can be reserved for synchronous packets. Bluetooth can support an asynchronous data channel, up to three simultaneous synchronous voice channels, or a channel which simultaneously supports asynchronous data and synchronous voice. Each voice channel supports a 64 kb/s synchronous (voice) channel in each direction. The asynchronous channel can support maximal 723.2 kb/s asymmetric (and still up to 57.6 kb/s in the return direction), or 433.9 kb/s symmetric. The Bluetooth system consists of a radio unit, a link control unit, and a support unit for link management and host terminal interface functions. 1.2.3 Additional Accessories The Earphone comes with a built-in rechargeable Lithium Polymer 3.9v battery. And it can be recharge using the supplied charger SAW04-05.00-200US.

www.tuv.com Test Report No.: 14008929 001 Date: 26-05-2005 page 2 of 14 Table of Content Page Cover Page .................................................................................1 Table of Content ..........................................................................2 Product information.......................................................................................................4 Manufacturers declarations ....................................................................................................................... 4 Product function and intended use........................................................................................................... 4 Submitted documents ................................................................................................................................ 4 Special accessories and auxiliary equipment.......................................................................................... 4 List of Test and Measurement Instruments.................................................................4 Result FCC Part 15 – Subpart C ...................................................................................6 Subclause 15.203 – Antenna Information....................................................................... Pass................. 6 Subclause 15.204 – Antenna Information....................................................................... Pass................. 6 Subclause 15.207 – Disturbance Voltage on AC Mains ................................................. N.A.................. 6 Subclause 15.247 (a) – Carrier Frequency Separation.................................................. Pass................. 7 Subclause 15.247 (a) – Time of Occupancy (Dwell Time) ............................................. Pass................. 8 Subclause 15.247 (a) – 20 dB Bandwidth .............................................................................. .................. 9 Subclause 15.247 (a) – Hopping Sequence .................................................................... Pass.................9 Subclause 15.247 (a) – Equal Hopping Frequency Use ................................................ Pass............... 10 Subclause 15.247 (a) – Receiver Input Bandwidth ........................................................ Pass............... 11 Subclause 15.247 (a) – Receiver Hopping Capability.................................................... Pass............... 11 Subclause 15.247 (b) – Peak Output Power ................................................................... Pass............... 11 Subclause 15.247 (b) – Band edge compliance ............................................................. Pass............... 12 Subclause 15.247 (c) – Spurious Conducted Emissions .............................................. Pass............... 12 Subclause 15.247 (c) – Spurious Radiated Emissions.................................................. Pass............... 13 Appendix 1 – Test protocols 68 pages Appendix 2 – Test setup 3 pages Appendix 3 – Photo documentation 8 pages www.tuv.com Test Report No.: 14008929 001 Date: 26-05-2005 page 3 of 14 Appendix 4 – Product documentation 18 pages www.tuv.com Test Report No.: 14008929 001 Date: 26-05-2005 page 4 of 14 Product information Manufacturers declarations Transmitter Receiver Operating frequency range 2402 - 2480 MHz 2402 - 2480 MHz Type of modulation FHSS modulation FHSS modulation Number of channels 79 79 Channel separation 1 MHz 1 MHz Type of antenna Dielectric Chip Antenna soldered to the circuit board Dielectric Chip Antenna soldered to the circuit board Antenna gain (dBi) 0 0 Power level fix fix Type of equipment stand alone, plug-in radio device stand alone, plug-in radio device Connection to public utility power line No No Nominal voltage V nor : 3.9 V V nor : 3.9 V Independent Operation Modes Page scan Inquiry scan Connection state - ACL Link Connection state - SCO Link Product function and intended use The test item is a Stereo Headphone based on the Bluetooth technology version 1.2. Bluetooth is a short-range radio link intended to be a cable replacement between portable and/or fixed electronic devices. Bluetooth operates in the unlicensed ISM Band at 2.4 GHz. In the US a band of 83.5 MHz width is available. In this band, 79 RF channels spaced 1 MHz apart are defined. The channel is represented by a pseudo-random hopping sequence through the 79 channels. The channel is divided into time slots, with a nominal slot length of 625 μs, where each slot corresponds to different RF hop frequencies. The nominal hop rate is 1600 hops/s. The symbol rate on the channel is 1 Ms/s. Submitted documents Circuit Diagram Block Diagram Bill of material User manual Special accessories and auxiliary equipment The product has been tested together with the following additional accessory: 1. Manufacturer: FP Model number: SAW04-05.00-200US Input: 100-240VAC, 50-60Hz Output: 5V, 200mA www.tuv.com Test Report No.: 14008929 001 Date: 26-05-2005 page 5 of 14 List of Test and Measurement Instruments Kind of Equipment Manufacturer Type S/N Test Receiver Rohde & Schwarz ESH-3 890173/033 L/I/S/N Rohde & Schwarz ESH 3-Z5 849876/026 Oscilloscope HP 54713B US34510455 Test Receiver Rohde & Schwarz ESVP 882402/033 Absorbing Clamp Rohde & Schwarz MDS-21 979 3/4 Test Receiver Rohde & Schwarz ESVS30 842807/009 Biconical Antenna Rohde & Schwarz HK116 841489/015 Log.-Periodic Antenna Rohde & Schwarz HL223 841516/017 Universal Power Analyzer Voltech PM3000A 9915 Reference Impedance Network Voltech IEC 555 Standard 9946 AC Power Source California Instr. 4500L HK51895 Trip-Loop Antenna Chase LLA6142 1019 Double Ridge Horn Antenna EMCO 3115 9002-3351 Double Ridge Horn Antenna EMCO 3115 9002-3347 RF Comms Test Set HP 8920B US36492628 Spectrum Analyser + Tracking G. HP 8596E 3639A00758 Signal Generator Rohde & Schwarz SMY 01 844146/024 Signal Generator Rohde & Schwarz SMY 01 844146/023 BiLo…

Text truncated - open the document above for the full version.

www.tuv.com Test Report No.: 14008929 001 Appendix 2 page 1 of 3 Appendix 2 Test Setup Photos www.tuv.com Test Report No.: 14008929 001 Appendix 2 page 2 of 3 Set-up for Radiation Emission (Transceiver) www.tuv.com Test Report No.: 14008929 001 Appendix 2 page 3 of 3 Set-up for Radiation Emission (Transceiver)