RMS0217644XAALow power transmitter

Version 1.0 Swirl Networks SWIRL Beacon Model: 4XAA Micro-Location Services for SWIRL Mobile Marketing Platform Beacon Getting Started Guide Version 1.0 Swirl Networks FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 2.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Industry Canada Compliance Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Version 1.0 Swirl Networks SWIRL Beacon Components A -­‐ Bottom Case with Adhesive Mounting Tape/Velcro B -­‐ Top Case with Mounted Circuit Board and Battery Holder C – 4 AA Alkaline Batteries Getting Started 1. Power on the beacon by pressing the power button on the front of the beacon enclosure. 2. Once the power button has been pressed the Swirl Beacon will automatically start broadcasting and advertising its presence. The beacon will automatically be placed into a continuous broadcasting state until the battery is removed or depleted of its power or the beacon is powered off via the power button. Note: The beacon will provide a visual indication upon powering on via the flashing of a small green LED light to the left of the power button. Beacon operation and battery levels are monitored within the Swirl Administration Console. 3. To position the beacon, peel off the top film liner of the supplied adhesive/velcro and place in desired location (see Best Practices for Beacon Placement document for placement recommendations and guidelines). Apply moderate pressure for 5-10 seconds. Version 1.0 Swirl Networks 4. To remove the beacon from a wall or fixture, twist the bottom section of the beacon case in either a clockwise or counter clockwise manner while pulling the beacon away from the wall or fixture until the adhesive/velcro separates. Note: The desired area and distance that a beacon will record a detection event can be set and configured in the Swirl Console. 5. Once a beacon is powered on and positioned, the beacon must be activated in the Swirl Console (refer to the Swirl Console user guide on how to activate a sensor). This activation may also be achieved using the Swirl Beacon Manager mobile application. 6. To remove or replace a beacon’s batteries, open the case by pulling apart the snap fit closure at the parting line. Pop out the batteries by applying moderate upward pressure until released from the holders. SWIRL is a trademark of Swirl Networks, Inc. All other trademarks referenced, depicted, or otherwise used in connection with the Services (the "Third-Party Trademarks") belong to their respective owners or licensees and Swirl Networks is not affiliated with, sponsored by, or otherwise associated with such entities unless such a relationship is explicitly identified in the Services. The Third-Party Trademarks may not be used to disparage any applicable third-party, any of their products or services, or in any manner in which, in our reasonable judgment, may damage any goodwill in the Third-Party Trademarks.

Request for Confidentiality Date: ___December 03, 2015____ Subject: Confidentiality Request for: FCC ID: RMS0217644XAA and IC: 10872A-4XAA Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual Swirl has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:__________________________ ___Sandi McEnery__- Agent (Signature/Title) (Print name)

US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 1 of 6 EXTERNAL PHOTOGRAPHS Figure 1. Top of EUT Enclosure Note: Final enclosure will have cut outs for buttons and LEDs however the material will remain plastic. US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 2 of 6 Figure 2. Bottom of EUT Enclosure US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 3 of 6 Figure 3. Enclosure Sides 1 and 2 US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 4 of 6 Figure 4. Enclosure Sides 3 and 4 US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 5 of 6 Figure 5. Enclosure Opened US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 6 of 6 Figure 6. Enclosure Empty

US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 1 of 3 INTERNAL PHOTOGRAPHS Figure 1. Component Side of EUT US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 2 of 3 Figure 2. Battery Side of EUT US Tech Test Report: FCC Part 15 Certification/ RSS 210 FCC ID: RMS0217644XAA IC: 10872A-4XAA Test Report Number: 15-0230 Issue Date: December 3, 2015 Customer: Swirl Networks Model: 4XAA Page 3 of 3 Figure 3. Batteries Removed

Page 1 of 36 Application for US Code Title 47, Part 2, Subpart J, Section 2.947, Certification Per Part 15, Subpart C, for Intentional Radiators, Section 15.249, Intentional Radiator Operating within the Band 2400 MHz to 2483.5 MHz And US Code Title 47, Part 2, Subpart J, Section 2.902, Verification Per Part 15, Subpart B, for Unintentional Radiators, section 15.101, 15.107 and 15.109 For the Swirl Networks Swirl Model: 4XAA Manufactured by Swirl Networks UST Project: 15-0230 Test Date(s): October 2 – November 20, 2015 Issue Date: November 30, 2015 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com Page 2 of 36 I certify that I am authorized to sign for the test facility and that all of the statements in this report and in the Exhibits attached hereto are true and correct to the best of my knowledge and belief: US TECH (Agent Responsible For Test): By: Name: Alan Ghasiani Title: Consulting Engineer - President Date: November 30, 2015 This report shall not be reproduced except in full. This report may be copied in part only with the prior written approval of US Tech. The results contained in this report are subject to the adequacy and representative character of the sample provided. 3505 Francis Circle Alpharetta, GA 30004 PH: 770-740-0717 Fax: 770-740-1508 www.ustech-lab.com US Tech FCC Part 15.249/ RSS 210 Test Report: 15-0230 Date: November 30, 2015 Model(s): 4XAA FCC ID: RMS0217644XAA IC: 10872A-4XAA Customer: Swirl Networks Page 3 of 36 MEASUREMENT/TECHNICAL REPORT COMPANY NAME: Swirl Networks MODEL(S): 4XAA FCC ID: RMS0217644XAA IC ID: 10872A-4XAA DATE: November 30, 2015 This report concerns (check one): Original grant X Class II change_____ Equipment type: Intentional Radiator Operating within the bands 2400-2483.5 MHz Deferred grant requested per 47 CFR 0.457(d) (1) (ii)? yes_____ No X If yes, defer until:_________________ date N.A. agrees to notify the Commission by N.A. date of the intended date of announcement of the product so that the grant can be issued on that date. Report prepared by: US Tech 3505 Francis Circle Alpharetta, GA 30004 Phone Number: (770) 740-0717 Fax Number: (770) 740-1508 US Tech FCC Part 15.249/ RSS 210 Test Report: 15-0230 Date: November 30, 2015 Model(s): 4XAA FCC ID: RMS0217644XAA IC: 10872A-4XAA Customer: Swirl Networks Page 4 of 36 SUMMARY OF TEST REQUIREMENTS FCC Requirement Title Disposition 15.205 Restricted Bands Pass 15.207 Intentional Radiator Power Line Conducted Pass Emissions 15.209 Intentional Radiator Radiated Emissions Pass 15.249(a) Fundamental Field Strength Pass 15.107 Unintentional Radiator Power Line Conducted N/A Emissions 15.109 Unintentional Radiator Radiated Emissions Pass N/A = Not applicable for this unit. US Tech FCC Part 15.249/ RSS 210 Test Report: 15-0230 Date: November 30, 2015 Model(s): 4XAA FCC ID: RMS0217644XAA IC: 10872A-4XAA Customer: Swirl Networks Page 5 of 36 Table of Contents 1 General Information ........................................................................................ 8 1.1 Purpose of this Report .............................................................................. 8 1.2 Product Description ................................................................................... 8 1.3 Related Submittal(s)/Grant(s) ................................................................... 8 2 Tests and Measurements ............................................................................... 9 2.1 Configuration of Tested System ................................................................ 9 2.2 EUT Characterization .............................................................................. 10 2.3 Test Facility ............................................................................................. 10 2.4 Test Equipment ....................................................................................... 11 2.5 Modifications to EUT ............................................................................... 12 2.6 Measurement Standards (CFR 15.31) .................................................... 13 2.7 Frequency Range of Radiated Measurements (CFR 15.33) ................... 13 2.7.1 Frequency Range for Intentional Radiators ................................................ 13 2.7.2 Frequency Range for Unintentional Radiators ............................................ 13 2.7.3 Measurement Detector Function and Bandwidth (CFR 15.35) ................... 14 2.8 Antenna Requirement (CFR 15.203) ...................................................... 17 2.9 Intentional Radiator, Power Line Conducted Emissions (CFR 15.207) ... 17 2.10 Intentional Radiator, Radiated Emissions (CFR 15.249 (a), (e)) ............. 17 2.11 Restricted Bands of Operation (CFR 15.205) ......................................... 17 2.12 Band Edge Measurements and Restricted Bands (CFR15.249(d)) ........ 25 2.12.1 High Band Edge ...................................................................................... 26 2.12.2 Low Band Edge ...................................................................................... 29 2.13 Unintentional Radiator, Power Conducted Emissions (CFR 15.107, 15.207) ............................................................................................................. 32 2.14 Unintentional Radiator, Radiated Emissions (CFR 15.109, 15.209) ....... 33 2.15 Measurement Uncertainty ....................................................................... 36 2.15.1 Conducted Emissions Measurement Uncertainty .................................... 36 2.15.2 Radiated Emissions Measurement Uncertainty ....................................... 36 US Tech FCC Part 15.249/ RSS 210 Test Report: 15-0230 Date: November 30, 2015 Model(s): 4XAA FCC ID: RMS0217644XAA IC: 10872A-4XAA Customer: Swirl Networks Page 6 of 36 List of Tables Table 1. EUT and Peripherals ............................................................................ 10 Table 2. Test I…

Text truncated - open the document above for the full version.