RQ5KBU009lRAN Bluetooth H/F

Hamg Shing Corp

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Jan 24, 2006
Application Purpose: Original Equipment
Date of Application: Jan 24, 2006
Equipment Note: lRAN Bluetooth H/F
Frequency Range: 2402.00000000 - 2480.00000000
Company: Hamg Shing Corp
Country: China

Documents & Files

Select a file to view

Test Setup Photos

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

P/N:910-00200001B KBU009S P/N:910-00900001A Handfree Car Kits Contents Safety Reminder .................................................................. Parts List ............................................................................... Connector Diagram ............................................................ Operationse ......................................................................... Key Functions ...................................................................... 1 2 3 4 5 Contents PAGE 1 We strongly recommend a professional technician to setup hands-free car kit into car audio system. The technician is well equipped for the knowledge and abilities of car kit installation. Improper installation may cause unexpected damages. The following items are regarded before the unit installed. ● Confirm vehicle voltage supply is 12V output ● Toleration ranges from 9V to 16V ● Check mute function to be available for car audio system ● Additional speakers are needed when there is no audio output in the car ● Suitable locations for microphone 1.At least 80 cm distances from microphone to speaker 2.On the car's A-pillar 3.On the dashboard 4.On the steering column ● Unsuitable locations for microphone 1.Close to the car speaker less than 80 cm 2.Under the dashboard 3.Set to the ventilator of car air-conditioner ● Suitable locations for the control unit 1.Specific built-in center console 2.Behind the panel of the center console 3.Behind the lower dashboard ● Unsuitable locations for the control unit 1.Within the airbag area of action 2.In the engine compartment Connector DiagramConnector Diagram PAGE 2 PAGE 1 AMP 962191 COLOR: BLACK 16PIN ISO CONNECTOR COLOR: BLACK AMP 962189 COLOR:WHITE CINCH CONNECTOR TH24FW RADIO TELEPHONE TRANSMITER-RECEIVER RADIO CASSETTE INTERCO(RADIO CASSETTE)-FR RADIO TELEPHONE SWITCH RADIO CASSETTE 2. Control box Before operating the player, please check that the following accessories are supplied with the player: 1.User's manual 3. Bracket 4.Cigarette lighter adapter 5. AC/DC 12v adapter KBU009S Handfree Car Kits Operations PAGE 3 ● Pairing Action 1.Entering pairing mode by Button Long Push (2 seconds), the blue light is flashed at 5 Hz. 2.The local name of hands-free is 'IKCO-Axxxxxx' and Pin code is '1234'. 3.The blue light and the beep voice are on 2 seconds when paired successful. 4.When pairing with the second cell phone, Button Long Push (10 seconds), disconnect with the first one. ● Stand-by Mode 1.Starting voice recognition of phone by Button Short Push. 2.Starting to redial the last number with Button Long Push (2 seconds). ● Incoming Call 1.Button Short Push to accept the incoming call. 2.Button Long Push (2 seconds) to reject the incoming call. ● Hang On 1.Button Short Push to hang up the call. 2.Button Double Click to transfer the call to phone, and the call is resumed to hand-free by Button Double Click again. 3.Toggle Button Long Push (2 seconds) to mute and open the microphone of hands free. 4.Button Very Long Push (5 seconds) to enter volume adjustment mode, Button Short Push to adjust one level (1->2->3->4->5->4->3-> 2->1->2......). The volume adjustment mode is finished if any button action is not enabled after 5 seconds. ● Call waiting 1.Button Long Push (2 seconds) to accept the second call and hold the current call. 2.The action of Button Long Push (2 seconds) is to transfer both the current call and second call. 3.Button Short Push to hang up the current call when calling waiting state. Key Functions PAGE 4 Light switch Pairing Paired and Connect Ringing Accept Reject End Call waiting Hold Redial Making a call Voice tag Volume Adjust Private mode Blue Light Short Push Long Push (2Sec) Very Long Push (5Sec) State Beep Double Click Back Light ●●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●●●●●● ● ● ● ● ● ● ● ● ● ● ● ● ●●●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 5Hz 2 Sec 1Hz 1Hz 2 Sec 3 Blinks 1Hz .5 Sec .2 Sec 5 Sec 3 Beeps 1 Beeps for each level 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Federal Communications Commission (FCC) Statement

Cover Letter(s)

Application Note Application Note Rufa 2.4 GHz SMD Antenna Rev: AE020157-A/ July 10 2002 Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 2 (7) Subject to changes without prior notice Features - Designed for 2.4 GHz (Bluetooth TM , WLAN 802.11b, Home RF) - Intended for SMD mounting - Supplied in tape on reel Applications - Mobile phones - PDA’s - Headsets - Laptops - PC- Cards - CF- Cards Description The Rufa antenna is intended for use with all 2.4 GHz applications. The antenna requires a groundplane, i.e your device acts as an active part of the antenna and thus demand careful consideration concerning its placement General data Rufa 2.4 GHzProduct name Article No 2.4-2.5 GHz PolarizationLinear Impedance Operating temperature - 40 to 85 o C Weight 50 Ω 0.1 g Antenna type SMD Frequency 6 dBi Peak Gain* 55 % Efficiency* -11.86 -13.87 -9.85 -7.84 -10 0 -15 -10 -5 0 5 X Y Z 10 5 -5.82 -3.81 -1.8 10 dBi -5 -10 0 10 5 -5 2.22 6.25 0.21 4.23 Radiation Pattern 2.45 GHz Voltage Standing Wave Ratio 2.4 2.45 2.5 GHz VSWR 1:1 3:1 * HP9770 Network Analyzer 2:1 VSWR* <2.5:1 * Rufa reference board 3030A5839-01 (Left) Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 3 (7) Subject to changes without prior notice Rufa 2.4 GHz test board characteristics & RF performance The testboard is designed for evaluation purposes for Rufa 2.4 GHz SMD antenna. The card has the same size as a typical PCMCIA card and is fitted with a SMA connector. Test board matching Radiation patterns -35 dBi -25 dBi -15 dBi -5 dBi 5 dBi 15 dBi 30 210 60 240 90 270 120 300 150 330 1800 2.40 GHz 2.45 GHz 2.50 GHz X Y -35 dBi -25 dBi -15 dBi -5 dBi 5 dBi 15 dBi 30 210 60 240 90270 120 300 150 330 180 0 2.40 GHz 2.45 GHz 2.50 GHz Y Z -35 dBi -25 dBi -15 dBi -5 dBi 5 dBi 15 dBi 30 210 60 240 90270 120 300 150 330 180 0 2.40 GHz 2.45 GHz 2.50 GHz X Z XY- Plane XZ- Plane Series resistor 0 Ohm The antenna on the test board doesn’t require any matching. A zero Ohm resistor is used as a series component. Test board dimensions (mm) YZ- Plane Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 4 (7) Subject to changes without prior notice Antenna Dimensions F L W H I J K I G S1 S2 S3 L1 M N O YY = Year WW = Week No. Article No. Length WHGFS1 S2IL1KML WidthHeightFeedSolder Dimensions in millimeters J 2.0 ±0.12.0 ±0.11.0 ±0.153.9 ±0.112.6 ±0.28.1 ±0.1 3.7±0.1 2.4±0.12.0 ±0.1 Antenna Foot print GF S2IL1KM Ground Feed Solder Dimensions in millimeters NO 2.0 ±0.1 2.0 ±0.12.0 ±0.18.1 ±0.13.7 ±0.18.3±0.1 0.25±0.1 S3J 0.25 ±0.11.3±0.10.5±0.1 S3 1.0±0.1 Ground NO 1.3±0.1 0.3±0.15 S1 1.0 ±0.1 Copper area Soldering pads Transparent area K S3 J S2 S1 MG L1 F I N I O Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 5 (7) Subject to changes without prior notice Typical config. 1 Typical config. 2 Component types Inductor Capacitor Electrical interface C Copper area Soldering pads Transparent area t W Proposed land dimensions Module Strip line DC Block Component Component Component The matching network has to be individually designed using one, two or three components. *Dimension to be decided. (See item 3 Application example) t W C Transmission line: Unique dimensioning according to your PCB * Component matching: Inductor and capacitor values according to your specific device* Transmission line: Unique dimensioning according to your PCB * Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 6 (7) Subject to changes without prior notice Application example 5 4 General The antenna is of a quarter wave type and is dependent of the groundplane area to complete the antenna function. The antenna performance is also dependent of the size of the groundplane and the tranparent area. 1.Placment of the antenna The antenna shall be placed on a transparent area without underlying groundplane at the edge of the PCB oriented as above. Groundplane area surrounding the antenna should be with a clearence of C= 5-10 mm. No ground allowed in the Y- direction. 2.Placement of 2.4 GHz module To avoid losses in the strip line, the module shall be placed as close to the antenna as possible. 3.Strip line The strip line must be dimensioned according to your specific PCB. (see fig 1). No crossing strip lines are allowed between the strip line and its ground plane. 4.Via Connections To avoid spurious effects via connections must be made to analogue ground. 5.Component matching Component values are depending on antenna placement, PCB dimensions and location of other components. 6.DC Block Might be needed depending on RF Module configuration. 7.Clearence Front surface : Minimum clearence to other components, C= 5-10 mm Back surface: No components allowed within the clearence area 8.Casing material No metal casing or plastics using metal flakes should be used, avoid also metallic based paint or laquer. W t h Ground Strip line No crossing strip lines Front Surface 1 2 36 2.4 GHz Module 7 C CC C C C C 7 Back Surface C Y Y Fig. 1 Note !Incorrect implementation of the antenna will affect the performance. Contact gigaAnt for implementation services. Rev : AE020157-A / July 10 2002 Rufa 2.4 GHz SMD Antenna 7 (7) Subject to changes without prior notice Packaging Ordering Code 30 30 A5839 - 01 Antenna Family -SMD Technology -PCB Drawing No. Product Variants 2.4 GHz Module Left feeding Art No . 3030A5839-01 Contact information Europe Mail: [email protected] Tel: +46 46 286 21 86 USA Mail: [email protected] Tel: +1 919 719 27 48 ASIA Mail: [email protected] Tel: +656 890 6200 Or your local gigaAnt representative www.gigaAnt.com The antenna is supplied in Tape on reel.

External Photos

ID Label/Location Info

FCC ID LABEL FORMAT AND LOCATION Applicant: Hamg Shing Corp. FCC ID: RQ5KBU009

Internal Photos

RF Exposure Info

Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw RF EXPOSURE Standard Applicable According to §1.1307(b)(1), systems operating under the provisions of this section shall be oper- ated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Mobile device, the MPE is required. According to §1.1310 and §2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw MPE Prediction Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 4.09 (dBm) Maximum peak output power at antenna input terminal: 2.564484 (mW) Antenna gain (typical): 6 (dBi) Maximum antenna gain: 3.981072 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2441 (MHz) MPE limit for uncontrolled exposure at prediction 1 (mW/cm2) Power density at predication frequency at 20 (cm) 0.002032 (mW/cm^2) Measurement Result: The predicted power density level at 20 cm is 0.002032 (mW/cm^2) This is below the uncontrolled exposure limit of 1 mW/cm 2441MHz Measurement Result The predicted power density level at 20 cm is 0.002032 mW/cm 2 . This is below the uncontrolled exposure limit of 1 mW/cm 2 at 2441MHz.

Test Report

Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 Page: 1 of 51 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: Bluetooth Hands free car kit Brand Name: Maxcall Model Name: KBU009, KBU009S, KBU009P Model Difference: Different models depends on different traders in the market FCC ID: RQ5KBU009 Report No.: EF/2005/C0014 Issue Date: Jan. 13, 2006 FCC Rule Part: §15.247 Prepared for HAMG SHING TECHNOLOGY CORP. 957, Po Ai St., Chu Pei City, Taiwan Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw VERIFICATION OF COMPLIANCE Applicant: HAMG SHING TECHNOLOGY CORP. 957,Po Ai St.,Chu Pei City, Taiwan Equipment Under Test: Bluetooth Hands free car kit Brand Name: Maxcall FCC ID Number: RQ5KBU009 Model No.: KBU009, KBU009S, KBU009P Model Difference: Different models depends on different traders in the market File Number: EF/2005/C0014 Date of test: Jan. 02, 2006 ~ Jan. 11, 2006 Date of EUT Received: Jan. 02, 2006 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Jan. 13, 2006 Danny Yeh Prepared By: Date Jan. 13, 2006 Elisa Chen Approved By: Date Jan. 13, 2006 Vincent Su Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Version Version No. Date 00 Jan. 13, 2006 01 Jan. 17, 2006 02 Jan. 25, 2006 Report No: EF/2005/C0014 ID: RQ5KBU009 Issue Date: Jan. 13, 2006 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Table of Contents 1. GENERAL INFORMATION .........................................................................................................7 1.1. Product Description ............................................................................................................................7 1.2. Related Submittal(s) / Grant (s) ..........................................................................................................7 1.3. Test Methodology ...............................................................................................................................7 1.4. Test Facility.........................................................................................................................................7 1.5. Special Accessories .............................................................................................................................7 1.6. Equipment Modifications....................................................................................................................7 2. SYSTEM TEST CONFIGURATION ............................................................................................8 2.1. EUT Configuration .............................................................................................................................8 2.2. EUT Exercise ......................................................................................................................................8 2.3. Test Procedure.....................................................................................................................................8 2.4. Configuration of Tested System..........................................................................................................9 3. SUMMARY OF TEST RESULTS ...............................................................................................10 4. DESCRIPTION OF TEST MODES ............................................................................................10 5. CONDUCTED EMISSION TEST................................................................................................11 5.1. Standard Applicable ......................................................................................................................…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Zhijun Wang

[email protected]86-755-84600372Fax: 86-755-28826518

Technical Contact

SGS Taiwan Ltd.Vincent Su

[email protected]+886 222 993279

134, Wu Kung Rd., Wuku Industrial Zone · Taipei County · Taiwan

Test Firm

SGS Taiwan Ltd.Jason Lin

[email protected]886-2-22993279Fax: 886-2-22980488

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	2.60 mW

Confidentiality

Long Term

Grant Notes

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.