RRK-C300BRS4300Mbps Wireless Router & Access Point

multilanguage hardware installation guide 300 Mbps Wireless Router & Acces Point C300BRS4 www.conceptronic.net CONNECTIVITYENTERTAINMENT DATACOMMUNICATION NETWORKING WIRELESS version 1.0 Cover Manual C300BRS4.qxd 14-03-2007 15:39 Pagina 1

NEDERLANDS 1 Conceptronic C300BRS4 Snelstart Handleiding Gefeliciteerd met de aanschaf van uw Conceptronic Wireless 802.11n Router. In deze snelstart handleiding wordt stap voor stap uitgelegd hoe u de Conceptronic C300BRS4 kunt instellen en gebruiken. In geval van problemen adviseren wij u onze support-site te bezoeken (ga naar: www.conceptronic.net en klik op ‘Support’). Hier vindt u een database met veelgestelde vragen waar u hoogstwaarschijnlijk de oplossing voor uw probleem kunt vinden. Heeft u andere vragen over uw product die u niet op de website kunt vinden, neem dan contact met ons op via e-mail: [email protected] . Voor meer informatie over Conceptronic producten kunt u terecht op de Conceptronic website: www.conceptronic.net . De Hardware configuratie beschreven in deze handleiding kan afwijken op uw computer. Dit is afhankelijk van het besturingssysteem dat u gebruikt. 1. Inhoud van de verpakking De volgende onderdelen dienen aanwezig te zijn in de verpakking van de Conceptronic Wireless 802.11n Router: • Conceptronic C300BRS4 - Wireless 802.11n Router • Spanningsadapter 5V DC, 3A • 3x Antenne voor het Draadloze Signaal • Netwerk kabel 1.8 M • Meertalige Snelstart Handleiding • Product CD-ROM NEDERLANDS 2 2. Uitleg van de C300BRS4 • Voorzijde Nr Beschrijving Status Status Uitleg 1 Power LED UIT Het apparaat staat uit AAN Het apparaat staat aan 2 Status LED UIT Het apparaat staat uit / Systeemfout* KNIPPERT Het apparaat staat aan en is klaar voor gebruik 3 WAN LED UIT Er is geen WAN connectie aanwezig AAN - CONTINU Er is een WAN connectie gemaakt AAN – KNIPPERT Er wordt Data verzonden/ontvangen via de WAN Poort 4 WLAN LED UIT De draadloze verbinding is uitgeschakeld KNIPPERT De draadloze verbinding is ingeschakeld en actief 5 LAN LED’s UIT Er is geen LAN connectie aanwezig (1,2,3,4) AAN - CONTINU Er is een LAN connectie gemaakt AAN – KNIPPERT Er wordt Data verzonden/ontvangen via de LAN Poort 6 WPS LED AAN - KNIPPERT Wanneer de WPS knop is ingedrukt, zal de WPS LED 120 seconden knipperen terwijl er gezocht wordt naar WPS Clients. ** 7 WPS knop Druk op de WPS knop om de WPS functie te activeren. De router zal gedurende 120 seconden zoeken naar WPS Clients. ** * Bij normaal gebruik zal de Status LED binnen 45 seconden gaan knipperen. Als er een systeemfout optreedt zal de Status LED uitblijven. Controleer bij een systeemfout de volgende punten: a. Schakel het apparaat uit, wacht 10 seconden en schakel het apparaat weer aan. b. Zet het apparaat terug naar de fabrieksinstellingen door de Reset knop op de achterzijde van het apparaat +/- 15 seconden ingedrukt te houden. Als de Status LED niet aangaat nadat u bovenstaande punten geprobeerd heeft, neem dan contact op met Conceptronic Support via emailadres: [email protected] ** Voor meer informatie over de WPS functie, zie Hoofdstuk 6 van deze Snelstart Handleiding. 1 4 3 2 5 7 6 NEDERLANDS 3 • Achterzijde Nr Beschrijving Uitleg 1 Antenne aansluiting Reverse-SMA aansluiting voor de antenne 2 LAN Poorten Aansluitingen voor de computers 3 Antenne aansluiting Reverse-SMA aansluiting voor de antenne 4 WAN Poort Aansluiting voor een Breedband gateway 5 Reset knop Zet het apparaat terug naar de fabrieksinstellingen 6 Spanningsaansluiting Aansluiting voor de spanningsadapter 7 Antenne aansluiting Reverse-SMA aansluiting voor de antenne Let op: Deze Snelstart Handleiding geeft alleen uitleg over de basisinstellingen die benodigd zijn om de C300BRS4 operationeel te krijgen. Voor gedetailleerde uitleg over de mogelijkheden en instellingen van de C300BRS4 kunt u de Gebruikershandleiding op de meegeleverde CD-ROM raadplegen (Alleen Engels!). Selecteer de optie “View User Manual” in het Autorun Menu van de CD-ROM. 2 1 4 6 5 3 7 NEDERLANDS 4 3. Hardware Installatie Sluit de 3 meegeleverde antennes aan op de antenne aansluitingen aan de achterzijde van de C300BRS4. Sluit de meegeleverde spanningsadapter aan op de C300BRS4 en op een vrij stopcontact. De Power LED van de C300BRS4 zal aangaan. 3.1 WAN Connectie Gebruik een LAN kabel om de C300BRS4 aan te sluiten op uw breedband gateway (Kabel modem, DSL modem, Glasvezel gateway, etc.) De WAN LED op de voorzijde van de C300BRS4 zal aangaan. Let op: Als de WAN LED op de voorzijde niet aangaat, controleer dan de volgende punten: - De C300BRS4 is ingeschakeld (De Power LED is aan). - Uw breedband gateway is ingeschakeld. - De LAN kabel tussen beide apparaten is correct aangesloten. 3.2 LAN / Draadloos LAN Connectie Voor gebruikers van de LAN poorten: Verbind de LAN kabel met 1 van de 4 LAN poorten op de achterzijde van de C300BRS4 en met de netwerk kaart in uw computer. De LAN LED behorend bij de gebruikte LAN poort zal oplichten om aan te geven dat de computer verbonden is (uw computer en LAN verbinding dienen ingeschakeld te zijn). Voor draadloze gebruikers: U kunt op 2 verschillende manieren draadloos een verbinding leggen met de C300BRS4: - Handmatig, zonder beveiliging. - Automatisch met de WPS functie, met beveiliging. Als u 1 of meer draadloze clients heeft die geen WPS ondersteunen, adviseren wij u om handmatig een verbinding te leggen met de C300BRS4, of om de draadloze verbinding eerst te beveiligen voordat u handmatig verbind. U kunt uw draadloze verbinding beveiligen met de Configuration Wizard, beschreven in Hoofdstuk 5.3. In dit hoofdstuk wordt beschreven hoe u handmatig een verbinding kunt leggen met een onbeveiligd netwerk. Voor meer informatie over de WPS functie en de configuratiestappen, zie Hoofdstuk 6 van deze Snelstart Handleiding. Handmatige draadloze verbinding: Bijna elk merk/type draadloze netwerkkaart gebruikt een andere configuratie applicatie. Controleer de handleiding van uw draadloze netwerkkaart hoe u een draadloze verbinding kunt opzetten. NEDERLANDS 5 Het onderstaande voorbeeld maakt gebruik van de standaard Microsoft applicatie voor draadloze verbindingen die geïntegreerd is in Windows XP met Service Pack 2. A. Klik met de rechter muisknop op het Draadloze …

Text truncated - open the document above for the full version.

Date: September 11, 2007 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize the Taiwan office of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS TW, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS TW on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS TW as our agent, we still recognize that we are responsible to: h) Comply with the relevant provisions of the certification program; i) Make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; j) Make claims regarding certification only in respect of the scope for which certification has been granted; k) Do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; l) Use certification only to indicate the products are certified as being in conformity with specified standards; g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) Ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) Keep a record of all complaints made known to the us relating to the product compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Leeming / Manager Alpha Networks Inc. Tel: 886-3-563666 ext.6613 Fax: 886-3-5665091 E-mail: [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

September 11, 2007 Federal Communications Commission Authorization and Evaluation Division FCC ID: RRK-C300BRS4 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Operational Description 3. Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Leeming Li/ Senior Manager Alpha Networks Inc. Tel: 886-3-563666 ext.6613 Fax: 886-3-5665091 E-mail: [email protected]

Chris Harvey From: alice.lan [[email protected]] Sent: Sunday, December 16, 2007 10:34 PM To: application.2007 Cc: [email protected] Subject: Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#1 Attachments: C300BRS4_Label Drawing & Location(961210).pdf; C300BRS4 label format (961210).pdf; C300BRS4 User Manual(961210).pdf; C300BRS4_Description of Operation(0615)finally.pdf 12/17/2007 Dear Chris Harvey, I am sorry to disturb you.What is status in this case? Thank you very much. Alice ----- Âà§eªÌ alice.lan/ccsemc ©ó 2007/12/17 11:30 AM ----- Dear Chris Harvey, You are listed as the Technical Contact for the above referenced TCB application. The following item(s) need(s) to be resolved before the review can be continued: 1. The FCC ID Label is required to have the statements from FCC 15.19 located on the label for devices that have sufficient space for the wording. This device appears to have sufficient space for this label, so therefore please update the label to contain the required statement from FCC 15.19. Answer:Please find the attachment for your reference. 2. The Users Manual page 41 English indicates that this device can operate on channels 1-13, however FCC regulations restrict this device to operate only on channels 1-11. How is this device prevented from operating on channels 12 & 13? Please update the manual to indicate that this device can only operate from channels 1-11 in the USA. The manual should also be updated to indicate that this device must operate at least 20cm from a person's body in order to comply with FCC RF Exposure requirements. Answer:Please find the attachment for your reference. 3. The Operational Description exhibit submitted with this application only describes the chipset used in this device. Please provide a more detailed system operational description. Also, please note that the original chipset specification sheet was uploaded twice, and therefore I will only include this exhibit once in the final upload to the FCC. Answer:Please find the attachment for your reference, I am sorry to double filing the data. 4. Please confirm that the MIMO operation of this device uses only Spatial Multiplexing. Also indicate whether this device uses Cyclic Diversity and alice.lan ÂÅ©ÉÄõ 2007/12/10 02:05 PM ¦¬¥ó¤H¡G application.2007/ccsemc@ccsemc °Æ¥»§Û°e¡G <[email protected]> ¥D¦®¡G Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#1 if each chain is driven incoherently. Answer:The Cyclic Diversity used to 11n MIMO mode. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best Regards, Alice Lan Compliance Certification Services Inc. Tel:+886(3)591-0068 Ext:504 Fax:+886(3)582-5720 [email protected] ________________________________________________________________________ This e-mail transmission is confidential and intended solely for being reviewed by the recipient(s) identified above. If you are not an identified recipient, please ensure that this communication remains confidential and promptly return it to the sender. Please contact immediately by phone (Tel: 886-2-2299-9720) for any problem with this transmission. Thank you for your attention. 12/17/2007

Chris Harvey From: alice.lan [[email protected]] on behalf of application [[email protected]] Sent: Sunday, January 06, 2008 10:07 PM To: [email protected] Cc: [email protected] Subject: Re:Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#2 Attachments: C300BRS4 label format (970107).pdf; C300BRS4_Label Drawing & Location_970107_.pdf; C300BRS4 User Manual(970107).pdf; C300BRS4_Description of Operation(970107).pdf 1/7/2008 Dear Chris, Thank you for your reply, please find the attachment. Thank you very much. Best Regards, Alice Alice, I am sorry for the delay in responding to you. Please note the following still need to be addressed. 1. The replacement Label and Location exhibits are not legible. The text on the label can not be read. Please submit updated label that are legible. ANSWER:Please find attachment. 2. On page 41, in the English section of the manual, you have changed the wording to indicate that this device can be selected to operate between Channe1 1 and 11; however the text in all the other languages still indicate that this device can operate between 1 and 13. You have not indicated how this device is restricted to operate only on Channels 1 through 11. Please indicate how this device as marketed in the United States will be restricted to channels 1-11. ANSWER:Please find attachment. 3. You have submitted a third identical chipset description and not submitted a system/device operational description. Please submit a System Level Operational Description in accordance with FCCs 2.1033(b)(4). ANSWER:Please find attachment. Please let me know if this is not clear. Best regards, Chris Harvey ________________________________________ <[email protected]> 2007/12/17 11:47 PM  <[email protected]>, <[email protected]>  <[email protected]>  Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#2 From: alice.lan [mailto:[email protected]] Sent: Sunday, December 16, 2007 10:34 PM To: application.2007 Cc: [email protected] Subject: Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#1 Dear Chris Harvey, I am sorry to disturb you.What is status in this case? Thank you very much. Alice ----- ' alice.lan/ccsemc ?- 2007/12/17 11:30 AM ----- alice.lan -.o}-- 2007/12/10 02:05 PM OÉl application.2007/ccsemc@ccsemc .>-{'- <[email protected]> Z| Alpha Networks Inc., FCC ID: RRK-C300BRS4, Assessment NO.: AN07T7373, Notice#1 Dear Chris Harvey, You are listed as the Technical Contact for the above referenced TCB application. The following item(s) need(s) to be resolved before the review can be continued: 1. The FCC ID Label is required to have the statements from FCC 15.19 located on the label for devices that have sufficient space for the wording. This device appears to have sufficient space for this label, so therefore please update the label to contain the required statement from FCC 15.19. Answer:Please find the attachment for your reference. 2. The Users Manual page 41 English indicates that this device can operate on channels 1-13, however FCC regulations restrict this device to operate only on channels 1-11. How is this device prevented from operating on channels 12 & 13? Please update the manual to indicate that this device can only operate from channels 1-11 in the USA. The manual should also be updated to indicate that this device must operate at least 20cm from a person's body in order to comply with FCC RF Exposure requirements. Answer:Please find the attachment for your reference. 3. The Operational Description exhibit submitted with this application only describes the chipset used in this device. Please provide a more detailed system operational description. Also, please note that the original chipset specification sheet was uploaded twice, and therefore I will only include this exhibit once in the final upload to the FCC. Answer:Please find the attachment for your reference, I am sorry to double filing the data. 4. Please confirm that the MIMO operation of this device uses only Spatial Multiplexing. Also indicate whether this device uses Cyclic Diversity and if each chain is driven incoherently. Answer:The Cyclic Diversity used to 11n MIMO mode. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase 1/7/2008 processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best Regards, Alice Lan Compliance Certification Services Inc. Tel:+886(3)591-0068 Ext:504 Fax:+886(3)582-5720 [email protected] 1/7/2008

Compliance Certification Services Inc. Report No.70817003 Page 1 of 34 External Photo Compliance Certification Services Inc. Report No.70817003 Page 2 of 34

Compliance Certification Services Inc. Report No.70817003 Page 29 of 34 Power Adapter Photo (Model : US318-05) Compliance Certification Services Inc. Report No.70817003 Page 30 of 34 Compliance Certification Services Inc. Report No.70817003 Page 31 of 34 Compliance Certification Services Inc. Report No.70817003 Page 32 of 34 Compliance Certification Services Inc. Report No.70817003 Page 33 of 34 Compliance Certification Services Inc. Report No.70817003 Page 34 of 34

Compliance Certification Services Inc. Report No.70817003 Page 1 of 34 External Photo Compliance Certification Services Inc. Report No.70817003 Page 2 of 34 Compliance Certification Services Inc. Report No.70817003 Page 3 of 34 Internal Photo Compliance Certification Services Inc. Report No.70817003 Page 4 of 34 Compliance Certification Services Inc. Report No.70817003 Page 5 of 34 Compliance Certification Services Inc. Report No.70817003 Page 6 of 34 Compliance Certification Services Inc. Report No.70817003 Page 7 of 34 Compliance Certification Services Inc. Report No.70817003 Page 8 of 34 Compliance Certification Services Inc. Report No.70817003 Page 9 of 34 Compliance Certification Services Inc. Report No.70817003 Page 10 of 34 Compliance Certification Services Inc. Report No.70817003 Page 11 of 34 Compliance Certification Services Inc. Report No.70817003 Page 12 of 34 Compliance Certification Services Inc. Report No.70817003 Page 13 of 34 Compliance Certification Services Inc. Report No.70817003 Page 14 of 34 Compliance Certification Services Inc. Report No.70817003 Page 15 of 34 Power Adapter Photo (Model : AF1805-A) Compliance Certification Services Inc. Report No.70817003 Page 16 of 34 Compliance Certification Services Inc. Report No.70817003 Page 17 of 34 Compliance Certification Services Inc. Report No.70817003 Page 18 of 34 Compliance Certification Services Inc. Report No.70817003 Page 19 of 34 Compliance Certification Services Inc. Report No.70817003 Page 20 of 34 Power Adapter Photo (Model : AF1805-B) Compliance Certification Services Inc. Report No.70817003 Page 21 of 34 Compliance Certification Services Inc. Report No.70817003 Page 22 of 34 Compliance Certification Services Inc. Report No.70817003 Page 23 of 34 Compliance Certification Services Inc. Report No.70817003 Page 24 of 34 Power Adapter Photo (Model : AF1805-E) Compliance Certification Services Inc. Report No.70817003 Page 25 of 34 Compliance Certification Services Inc. Report No.70817003 Page 26 of 34 Compliance Certification Services Inc. Report No.70817003 Page 27 of 34 Compliance Certification Services Inc. Report No.70817003 Page 28 of 34

Specification 1. Electrical Properties : 1.1 Frequency Range............ 1.2 Impedance .................. 1.3 VSWR ..................... ... 1.4 Return Loss.................. 1.5 Radiation ..................... 1.6 Gain............................2.0dBi typ. 1.7 Polarization............... ...Linear Vertical 1.8 Admitted Power............ 1.9 Cable........................ ...RG-178 Coaxial Cable 1.10 Connector.................. ...SMA Plug Reverse 2. Physical Properties : 2.1 Antenna Cover...............TPE 2.2 Antenna Base............... PC 2.3 Antenna Base............... PBT 2.4 Operating Temp. ......... ...-10 ~ +60 2.5 Storage Temp. ............ ...-10 ~ +70 2.6 Color ........................ .White(WY-051) RF Antenna Cable Assembly Omni-directional 1W 2.4GHz ~ 2.5GHz 50Ω Nominal 1.921 Max. -10 dB Max. 1 2 RF Antenna Assembly P/NOSSR-71267) SPEC :2.4~2.5 GHz 2007/3/30 3 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C037-510794-A SSR-71267 H E-PLANE.nsi 2.400000 GHz2.450000 GHz2.500000 GHz 4 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C037-510794-A SSR-71267 V H-PLANE.nsi 2.400000 GHz2.450000 GHz2.500000 GHz 5 6 7 8 MATERIAL SAFETY DATA SHEET 1. General Information Product name : HAMBURG H-2 Supplier :HANPAO CO.,LTD. Tel: 0755-28126898 Fax: 0755-28126080 Emergency Tel. No. : HANPAO CO.,LTD. Tel: 0755-28126898 2. Composition Irradiated cross-linkied, flexible polyolefin, flame retardant, hea shrinkable tubing. 3. Hazards Identification Most important hazards: If the product is overheated or burned, harmful vapors shall be formed. The heated product has the potential to cause thermal burns, if touched. < Note >Durning heat-shrinking process, a slight characteristic odor of plastic may be noticed. This odor is not harmful. 4. First aid measures Inhalation : If vapors from the burning or overheated product are inhaled, provide fresh air. If symptoms are not reduced, seek medical advice. Skin contact: If the heated product contacts skin, remove the product immediately. Eye contact: If the heated product contacts eyes, rinse thoroughly with plenty of water for at least Ingestion: Seek medical advice. 5. Fire-fighting measures Suitable extinguishing media: water spray, dry powder, CO2 foam. <Note>The product is flame-retarded(self-extinguish), but will burn, if continuously exposed to flame. Use the extinguishing media appropriate for the source of the fire. The self-contained breathing apparatus and the personal protective equipment may be needed in the evnt of large fires. jianshe Rd., longsheng chun longhua town, bao An District,shenzhen city, Guangdong,china. jianshe Rd., longsheng chun longhua town, bao An District,shenzhen city, Guangdong,china. 9 MATERIAL SAFETY DATA SHEET 6. Accidental release measures Personal precautions: Avoid contact with the heated product. Gloves may be required to handle the product, when hot. If overheated, avoid breathing fumes which may be emitted. Environmental precaution: In common with all good industrial practice, install in well ventilated areas only. Methods for cleaning up: Sweep up and down in a disposal container. 7. Handling: No special handling advice required. Storage: Store at room temperature in unopened packs to avoid direct sunlight. 8. Exposure controls / personal protection Technical measures: Normal manufacturing environment. Personal protection equipment: Under normal operation, not necessary. Hand protection: Gloves may be required to handle the product, when hot. Eye protection: Under normal operation, not necessary. Other protection: Under normal operation, not necessary. 9. Physical and chemical properties Form: : liquor(tubing) Color(standard): Black, red, yellow, green, blue and white Odor: Slight characteristic plastic odor. Melting point/range : The material has melting point, 90 nominal, but it will not flow over Boiling point/range: Not applicable Flash point: Unknown Ingintion point: Unknown Explosive properties : Not applicable Vapor pressure: Not applicable Specific gravity(20 : 1.35 nominal Water solubility (20 : Small molecular solubility in water 10. Stability and preparation Stability: Stable at normal conditions. Recommended max. operating temperature is 125. Don't heat over 300 to avoid harmul vapors which may be formed at high temperature. Material to avoid: None Hazardous decomposition products: None under normal conditions. If the product is overheated or burned, harmful vapors (carbon monoxide and hydrogen halides) maybe be generated. 10 MATERIAL SAFETY DATA SHEET 11. Toxicological information Acute toxicity: Unknown Skin: Not irritating, but the heated product has potential to cause thermal burn. Eyes: If the product is overheated or burned, vapors may irritate eyes. Inhalation : Harmful vapors produced by overheating or burning may cause irritation to the upper respiratory tract. Ingestion : Not digestible. Further information: During heating process of the product, slight plastic smell may cause discomfort for susceptible persons. 12. Ecological information Biodegradability: Unknown (no data) Aquatic toxicity: Unknown (no data) Further information: Unknown (no data) 13. Disposal considerations: Product: Incinerate or bury in accordance with local and national regulations. Contact proper local authorities Contaminated packin g: Cardboard boxes and reels can be delivered to local recycling facilities. 14. Transport information Not classified as dangerous with regard to the transport regulation. 15. Regulatory Information According to EC directive: Unknown Symbol: Not applicable R-phrase: Not applicable S-phrase: Not applicable 16. Other Information The information provided in this Product Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe h…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc.FCC ID RRK-C300BRS4 Refer No. 70504007-RP1 Report No.70817003-RP1 Page 1 of 149 FCC 47 CFR PART 15 SUBPART C AND ANSI C63.4 : 2003 TEST REPORT For 300Mbps Wireless Router & Access point Model : C300BRS4 Trade Name : CONCEPTRONIC Issued for Alpha Networks Inc. No. 8, Li-shing Road VII, Science-based Industrial Park, Hsinchu, Taiwan R.O.C. Issued by Compliance Certification Services Inc. Hsinchu Lab. Rm. 258, Bldg. 17, NO.195, Sec.4 Chung HsingRd., ChuTung Chen, Hsinchu, Taiwan 310, R.O.C TEL: (03) 591-0068 FAX: (03) 582-5720 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NVLAP or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc.FCC ID RRK-C300BRS4 Refer No. 70504007-RP1 Report No.70817003-RP1 Page 2 of 149 TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION........................................................................................... 3 2. EUT DESCRIPTION.................................................................................................................. 4 2.1 DESCRIPTION OF EUT & POWER.................................................................................... 4 3. DESCRIPTION OF TEST MODES .......................................................................................... 5 4. TEST METHODOLOGY............................................................................................................6 5. FACILITIES AND ACCREDITATIONS .................................................................................. 6 5.1 FACILITIES .......................................................................................................................... 6 5.2 EQUIPMENT ........................................................................................................................ 6 5.3 LABORATORY ACCREDITATIONS LISTINGS................................................................... 6 5.4 TABLE OF ACCREDITATIONS AND LISTINGS .................................…

Text truncated - open the document above for the full version.