RRK-CS3152Wireless HD Day/Night Cloud (Network) Camera

CS-3152/ CS-3152C Network Camera Quick Installation Guide Product Name: CS-3152C: Wireless HD Day/Night Cloud Camera ; CS-3152: Wireless HD Day/Night Network Camera Model No. : CS-3152C, CS-3152    Quick Installation Guide FCC Warning Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.    Quick Installation Guide CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.    Quick Installation Guide 1 Before You Begin... System Requirements 䊈 10 Base-T Ethernet or 100 Base-TX Fast Ethernet 䊈 CD-ROM or DVD-ROM drive 䊈 CPU: Intel Pentium IV 2.0 GHz and above, or AMD Athlon 64 3000+ and above 䊈 Memory: 512 MB or above 䊈 VGA resolution:1024 x 768 or above Package Contents 䊈 One SOHO Internet Camera 䊈 This Quick Installation Guide 䊈 One External Antenna 䊈 One Installation CD-ROM 䊈 One Stand 䊈 One DC Power Adapter 䊈 One RJ-45 Ethernet Cable NOTE: If any item contained is damaged or missing, please contact your local dealer immediately.    Quick Installation Guide 2 Hardware Installation Attach the Stand Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the camera’s rear panel, and then connect it to the network. Connect the Power Adapter Connect the external power adapter to the DC power input connector located on the camera’s rear panel, and then connect it to your wall outlet. (Tip: You can confirm the power source is supplied from the Power LED on the camera.)     Quick Installation Guide 3 Running the IPCam Wizard Launch IPCam Wizard Use the IPCam Wizard to quickly configure IP settings for the camera that are compatible with your computer. The IPCam Wizard is a program run separately from the web browser video display and manager. First install the program from the Installation CD, then use the IPCam Wizard to configure suitable IP settings for the camera. Follow the steps below to install the IPCam Wizard program. 1. Insert the Installation CD-ROM into your CD-ROM drive. Click IPCam Wizard to launch the setup wizard software. The following window appears, click the > symbol to proceed to the next setup window. 2. Choose the CS-3152/CS-3152C from the list. If there is more than one camera operating on the network, these will also appear in the list. If the camera does not appear in the list, click the Magnifying Glass icon to renew the search. If it still does not appear, check the network connection on the camera, especially the LED indicators on the right side of the camera. Select the CS-3152/CS-3152C from the list and click the > symbol to begin configuration with the IPCam Wizard. 3. Type the administrator ID (user name) and Password to proceed to configure the camera. The default ID is admin and the default Password is also admin. Click the > symbol to proceed to the next IPCam Wizard menu screen.     Quick Installation Guide 4. This screen allows you to change the administrator password. To change the password carry out the following:  Tick the Change Password checkbox  Type a New Password  Type it again to Confirm Password.  Click the > symbol to proceed to the next IPCam Wizard menu screen. Leave the checkbox unchecked to skip this step. 5. This screen allows you to set a Camera Name and configure the date and time s…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division 06,11, 2014 ATTESTATION FCC ID: RRK-CS3152 Product description: CS-3152C : Wireless HD Day/Night Cloud Camera CS-3152 : Wireless HD Day/Night Network Camera Model: CS-3152C, CS-3152 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. We also promise that the end user or installer will not be able to change countries. For United States only channels 1-11 will be available. Best Regards Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666#6760 FAX: 886-3-5665091 E-mail: [email protected]

Attestation for FCC Declaration of Conformity Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2014/06/11 FCC ID: RRK-CS3152 To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Regards, Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666#6760 FAX: 886-3-5665091 E-mail: [email protected]

Request for Confidentiality Date: _2014/06/11__ Subject: Confidentiality Request for: ______ RRK-CS3152______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term  Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term  Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term  Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ Alpha Networks Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: ______ Kelly Tsai ___________________________________________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Confirmation Letter We hereby confirm that Model No: CS-3152C and CS-3152 are identical in electrical, mechanical and physical design. The difference between these 2 models is only for software and marketing purpose. Confirmed by: Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666#6760 FAX: 886-3-5665091 E-mail: [email protected]

Declaration of Authorization We Name: Alpha Networks Inc. Address: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. City: Hsinchu Country: Taiwan, R.O.C Declare that: Name Representative of agent: Gene Chang Agent Company name: QuieTek Corporation Address: 2F, No. 345, Xinhu 2nd Rd., Neihu District, City: Taipei City 114, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: CS-3152C : Wireless HD Day/Night Cloud Camera CS-3152 : Wireless HD Day/Night Network Camera Type designation: CS-3152C, CS-3152 Trademark: Alpha FCC ID: RRK-CS3152 on our behalf. Date: 2014/06/11 City: Hsinchu Signature: Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666#6760 FAX: 886-3-5665091 E-mail: [email protected]

Report No： 1450137R-RFUSP42V01 Page: 146 of 157 Attachement EUT Photograph (1) EUT Photo (2) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 147 of 157 (3) EUT Photo (4) EUT Photo

Report No： 1450137R-RFUSP42V01 Page: 148 of 157 (5) EUT Photo (6) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 149 of 157 (7) EUT Photo (8) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 150 of 157 (9) EUT Photo (10) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 151 of 157 (11) EUT Photo (12) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 152 of 157 (13) EUT Photo (14) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 153 of 157 (15) EUT Photo (16) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 154 of 157 (17) EUT Photo (18) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 155 of 157 (19) EUT Photo (20) EUT Photo Report No： 1450137R-RFUSP42V01 Page: 156 of 157 (21) EUT Photo (MB) (22) EUT Photo (ANT) Report No： 1450137R-RFUSP42V01 Page: 157 of 157 (23) EUT Photo

Report No： 1450137R-RFUSP42V01 Page: 1 of 157 FCC Test Report Product Name ： CS-3152C: Wireless HD Day/Night Cloud Camera ; CS-3152: Wireless HD Day/Night Network Camera Model No. ： CS-3152C, CS-3152 FCC ID. ： RRK-CS3152 Applicant ： Alpha Networks Inc. Address ： No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. Date of Receipt： 2014/05/02 Issued Date ：2014/06/24 Report No. ：1450137R-RFUSP42V01 Report Version ：V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 1450137R-RFUSP42V01 Page: 2 of 157 Test Report Certification Issued Date : 2014/06/24 Report No. : 1450137R-RFUSP42V01 Product Name ： CS-3152C: Wireless HD Day/Night Cloud Camera ; CS-3152: Wireless HD Day/Night Network Camera Applicant ： Alpha Networks Inc. Address ： No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. Model No. ： CS-3152C, CS-3152 FCC ID. ： RRK-CS3152 EUT Test Voltage : AC 100-240V, 50/60Hz Trade Name ： ALPHA Applicable Standard ： FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2013 ANSI C63.4: 2009 Test Result ： Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By : ( Fonbo Fang / Engineering Adm. Assistant ) Reviewed By : ( JuBo Shen / Engineer) Approved By : ( Roy Wang / Director ) Report No： 1450137R-RFUSP42V01 Page: 3 of 157 Laboratory Information We, QuieTek Corporation, are an independent RF consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025 specified testing scopes: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site:http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory: No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory: No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Taiwan R.O.C. : TAF, Accreditation Number: 1313 NCC, Certificate No : NCC-RCB-07 USA : FCC, Registration Number: 365520 Canada : IC, Submission No: 150981 Report No： 1450137R-RFUSP42V01 Page: 4 of 157 TABLE OF CONTENTS Description Page 1. General Information.............................................................................................................. 6 1.1. EUT Description ............................................................................................................. 6 1.2. Test Mode ..................................................................................................................... 10 1.3. Tested System Details .................................................................................................. 11 1.4. Configuration of tested System .................................................................................... 11 1.5. EUT Exercise Software ................................................................................................ 12 1.6. Test Facility...................................................................................................................13 2. Conducted Emission .......................................................................................................... 14 2.1. Test Equipment............................................................................................................. 14 2.2. Test Setup .................................................................................................................... 14 2.3. Limits ............................................................................................................................ 15 2.4. Test Procedure ............................................................................................................. 15 2.5. Test Specification.......................................................................................................... 15 2.6. Uncertainty ................................................................................................................... 15 2.7. Test Result....................................................................................................................16 2.8. Test Photo .................................................................................................................... 18 3. Peak Power Output ............................................................................................................ 19 3.1. Test Equipment............................................................................................................. 19 3.2. Test Setup .................................................................................................................... 19 3.3. Test procedures ............................................................................................................ 19 3.4. Limits ............................................................................................................................ 19 3.5. Test Specification.......................................................................................................... 19 3.6. Uncertainty ................................................................................................................... 19 3.7. Test Result.................................................…

Text truncated - open the document above for the full version.

Report No： 1450137R-RFUSP42V01 Page: 18 of 157 2.8. Test Photo Test Mode ： Mode 1: Transmit Description： Front View of Conducted Emission Test Setup Test Mode ： Mode 1: Transmit Description： Back View of Conducted Emission Test Setup Report No： 1450137R-RFUSP42V01 Page: 70 of 157 4.8. Test Photo Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Bi-Log) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Bi-Log) Report No： 1450137R-RFUSP42V01 Page: 71 of 157 Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Horn) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Horn)