RRK-TMJB010Digital Media Player

Trend Micro Incorporated Digital Media Player QIG Jewelry Box Model Name:TMJB-010 Package Contents If any of the below items are missing,please content your reseller. Jeweley Box AC adapter Ethernet cable QIG USB Connector SD card Reader Pairing Button IR Lens LED HDMI Connector Reset Button Ethernet plug AC Wireless Button LEDs Physical & Environmental Feature Detailed Description Operating Temperature 0°C to +40°C Storage Temperature -30°C to +60°C Humidity(operation) 20% to 80% Non-condensing Humidity (storage) 5% to 95% Non-condensing Jewelry Box Wireless and Ethernet Setting Wireless Setting Ethernet Setting 1.Press WPS Button Plug the Ethernet cable to the Ethernet plug 2.Press the Wireless Button The Blue LED will light up when the Setup is complete. Importing from SD Card/Camera LED Color behavior Status Blue LED Normal Usage Blue LED light slowly Booting Data Processing Right and Left LED light slow Network Connecting Initial Setting Blue LED light fast Importing From SD Card/Camera Red LED Error Import from Camera Import from SD card Watch the photos on Television Use HDMI cable to connecting the Device and Television, then change the input to HDMI. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Turn on the power of Camera ̧ and plug the HDMI cable between Camera and Jewelry Box. The photos will import to the Device automatically. When the rate Blue LED light get slowly, camera can be take off. Plug SD card into SD card Reader, The photos will import to the Device automatically. When the rate Blue LED light get slowly, camera can be take off. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Declaration for no non-US channel operation August 28, 2013 We, Alpha Networks Inc. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: RRK-TMJB010 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ------------------------------------------ Kelly Tsai / Senior Manager Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886- 3-5665091 E-mail: [email protected] 3/12/2013 8/28/2013

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: RRK -TMJB010 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics/Block Diagram/ Operating description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------ Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886-3-5665091 E-mail: [email protected] 3/12/2013

Power of Attorney To whom it may concern: We, the undersigned Alpha Networks Inc. Hereby authorize BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approvals and any communication needed with the national authority. Any and all acts carried out by BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan on our behalf shall have the same effects as acts of our own. FCC ID: RRK-TMJB010 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------ Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886-3-5665091 E-mail: [email protected] 2013/3/12

Report No.: 121217E01 Page 1 CONSTRUCTION PHOTOS OF EUT White color Report No.: 121217E01 Page 2 Report No.: 121217E01 Page 3 Black color Report No.: 121217E01 Page 4 Report No.: 121217E01 Page 5 Model No.: WA-12L12FU Report No.: 121217E01 Page 6 Report No.: 121217E01 Page 7 Model No.: WA-12L12FG Report No.: 121217E01 Page 8 Report No.: 121217E01 Page 9 Model No.: WA-12L12FK Report No.: 121217E01 Page 10 Report No.: 121217E01 Page 11 Model No.: WA-12L12FN Report No.: 121217E01 Page 12 Report No.: 121217E01 Page 13 Report No.: 121217E01 Page 14

FCC ID： RRK-TMJB010 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. 1:1 70.7mm 23.81mm #25 PET霧膜/ Matte transparent PET film for Laminating #50 白色特多龍/ Glossy WhitePolyester Label NOTICE : 1. Outline and aperture Cut Tooling Tolerence: +-0.15mm 2. Please refer to the material construction. Colors: 1. Background: Pantone 877 C 2. LOGO: M100 Y100 White 3. Texts and Graphics: K100 9700000001TMG TMJB-010 DeviceLabel Jenny Chang Jenny Chang 2013/4/24Joan Huang ID: 2330 2013/4/24 2013/4/24 MODEL: TMJB-010 MAC: 0090A9C001B4 P/N: JB-JBLL-J2X-SB-JWO S/N: 1312L1201210 FCC ID:RRK-TMJB010 IC:4833A-TMJB010 CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. I.T.E. E164374 6N81 MODEL: TMJB-010 FCC ID:RRK-TMJB010 IC:4833A-TMJB010 CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. I.T.E. E164374 6N81

Report No.: 121217E01 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 121217E01 Page 2 Report No.: 121217E01 Page 3 Report No.: 121217E01 Page 4 Report No.: 121217E01 Page 5 Report No.: 121217E01 Page 6 Report No.: 121217E01 Page 7 Report No.: 121217E01 Page 8 Report No.: 121217E01 Page 9

Report No.: SA121217E01 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA121217E01 MODEL NO.: TMJB-010 FCC ID: RRK-TMJB010 RECEIVED: Dec. 13, 2012 TESTED: Jan. 03, 2013 ISSUED: Mar. 05, 2013 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA121217E01 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 5 Report No.: SA121217E01 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA121217E01 Original release Mar. 05, 2013 Report No.: SA121217E01 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Digital Media Player BRAND NAME: Trend Micro Incorporated MODEL NO.: TMJB-010 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Alpha Networks Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: TMJB-010) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Mar. 05, 2013 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Mar. 05, 2013 ( May Chen, Deputy Manager ) Report No.: SA121217E01 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 389.045 2.4 20 0.13450 1.00 --- END ---

Report No.: RF121217E01 1 of 55 Report Format Version 5.1.0 FCC TEST REPORT REPORT NO.: RF121217E01 MODEL NO.: TMJB-010 FCC ID: RRK-TMJB010 RECEIVED: Dec. 13, 2012 TESTED: Dec. 24, 2012 to Jan. 03, 2013 ISSUED: Mar. 05, 2013 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF121217E01 2 of 55 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.5 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 16 4. TEST TYPES AND RESULTS .............................................................................. 18 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 18 4.1.2 TEST INSTRUMENTS .......................................................................................... 18 4.1.3 TEST PROCEDURES .......................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 19 4.1.5 TEST SETUP ....................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 20 4.1.7 TEST RESULTS ................................................................................................... 21 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 23 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 23 4.2.2 TEST INSTRUMENTS .......................................................................................... 24 4.2.3 TEST PROCEDURES .......................................................................................... 26 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 26 4.2.5 TEST SETUP ....................................................................................................... 27 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 27 4.2.7 TEST RESULTS ................................................................................................... 28 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 41 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 41 4.3.2 TEST INSTRUMENTS .......................................................................................... 41 4.3.3 TEST PROCEDURE ............................................................................................. 41 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 41 4.3.5 TEST SETUP ....................................................................................................... 41 4.3.6 EUT OPERATING CONDITIONS .........................................................…

Text truncated - open the document above for the full version.

Report No.: 120810E25C Page 1 Reference No.: 121009E05 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120810E25C Page 2 Reference No.: 121009E05 RADIATED EMISSION TEST