RRK-VGPWAR100Wireless Router

VGP-WAR100 4-410-886-04(1) VAIO       AC  AC  VAIO VAIO LAN VAIO 22 cm   LAN ISDN   PBX   AC AC AC LAN LAN LAN http://vcl.vaio.sony.co.jp/notices/security_wirelesslan.html VCCI B   AC AC AC AC 2.4 GHz 1) 2) 3) VAIO 2.4 GHz DS-SS OFDM 40 m x-xxx-xxx-01(1) ©2013 Sony Corporation / Printed in China / Wireless Router VGP-WAR100 / Operating Instructions / Mode d’emploi / Manual de instrucciones / Manual de instruções POWER LED  -  INTERNET LED  -  WIRELESS LED  -  WPS  -  LAN  -  DC  -  POWER LED INTERNET LED WIRELESS LED OFF WPS WPS WPS 3 WIRELESS LED WPS  WPS  10 LAN 1 LAN 2 AC  3 LED  3 VAIO  4 SSID  SSID 5 6  -  WIRELESS LED WPS 3  -  KEY 13  -  PIN 8 7 8  1 VAIO 2 http://VGP-WAR100/ 3 Login  Password: admin  VAIO IEEE 802.11b/g/n 2.412 GHz 2.462 GHz 1 11 ch *1 150 Mbps IEEE 802.11n/40 MHz) 64/128 bit:WEP WPA WPA2 MAC 8 SSID SSID 2 5 DHCP IP IP PPPoE DC 1 LAN 100BASE-TX/10BASE-T 1 DC 5 V VGP-AC10V9/V10 2.0 W 33 mm 26.5 mm 39 mm 30 g 5 35 10 20 80 35 65 29 20 60 10 10% 90% 60 20 35 *1 *1 ¡IMPORTANTE! POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE EQUIPO. RECUERDE QUE UN MAL USO DE SU APARATO PODRÍA ANULAR LA GARANTÍA. English WARNING To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Owner’s Record The model number and the serial number are located on the DC input side of this unit. Record the serial number in the space provided below. Refer to this number whenever you call your Sony dealer regarding this product. Model No. VGP-WAR100 Serial No. ____________________ The socket-outlet shall be installed near the equipment and shall be easily accessible. Use your product only with the AC adapter and power cord supplied with your computer. The following FCC statements apply only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations, and the FCC statements are not applicable in Canada, including the Province of QUEBEC. FCC Information (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 8 inches / 20 cm between the radiator and your body (excluding extremities: hands, wrists, feet and ankles). This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Safety Information WARNING  Do not touch the Wireless Router or accessories during thunderstorms. Electrical shock could result.  Do not place the Wireless Router in a location subject to: On an unstable surface In very humid areas or where there is no ventilation Excessive dust Direct sunlight or extreme heat Mechanical vibration or shock Greasy fumes  In the following circumstances, set the power to off and have the Wireless Router checked by qualified personnel before continuing its use. Water or a foreign object has entered the Wireless Router. Smoke is coming out of the Wireless Router. There is an unusual noise or smell. The Wireless Router is dropped or the exterior of the Wireless Router has broken.  Do not cover the Wireless Router with objects such as magazines or newspapers or use it in confined, enclosed places, such as the spaces between walls and furniture. Furthermore, do not turn the Wireless Router on its side while using it. Either situation could cause heat to build up inside the Wireless Router, leading to overheating and possible fire.  Do not swing the Router Unit, Wireless Unit, or AC adapter. Injury could result if they strike a person or fragile material, such as glass.  Keep the Wireless Router out of the reach of children. Unforeseen injury could result from swallowing loose parts, etc.  Do not use the Wireless Router in a crowded place like in a …

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division Declaration for no non-US channel operation We, Alpha Networks Inc. declare that the device does not support any non-US channels in all the operational mode(s), like Ad-Hoc...etc, for the following product. FCC ID: RRK-VGPWAR100 Sincerely yours, ------------------------------------------ Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886- 3-5665091 E-mail: [email protected] 2/22/2013

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: RRK-VGPWAR100 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics/Block Diagram/ Operating description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------ Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886- 3-5665091 E-mail: [email protected] 2/22/2013

Power of Attorney To whom it may concern: We, the undersigned Alpha Networks Inc. hereby authorize BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by BV CPS (H.K.) Ltd., Taoyuan Branch of Taiwan on our behalf shall have the same effects as acts of our own. FCC ID: RRK-VGPWAR100 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------ Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886- 3-5665091 E-mail: [email protected] 2013/2/22

Report No.: 130124E04 Page 1 CONSTRUCTION PHOTOS OF EUT

5.1 Nameplate label 5.1 Nameplate label5.1 Nameplate label 5.1 Nameplate labelcommon specification common specificationcommon specification common specification機銘板ラベル共通仕様 機銘板ラベル共通仕様機銘板ラベル共通仕様 機銘板ラベル共通仕様 1.2mm DATAMATRIX -Sony P/N (9 digits) + Blank (1 digit) + S/N (9 digits) [P/N] Refer to Page 2 [S/N] YMMSSSSSS *Must be unique across 5 P/Ns Y : Production Year 2=2012, 3=2013, 4=2014 MM : Production Month 01 SSSSSS : Serial Number 000001 (Reset to 000001 every month) Attach AttachAttach Attach 1 1 m m 5 m m 10mm 5mm 6 m m Attach AttachAttach Attach 5 m m WIRELESS ROUTER（ （（ （＊） ＊）＊） ＊） WIRELESS ROUTER（ （（ （＊ ＊＊ ＊） ）） ） 0-xxx-xxx- [SSID] “SSID : VAIO XX : 2 digits of random A YY : 2 digits of random 0 [KEY] “KEY : XXXXXXXXXXXXX” XXXXXXXXXXXXX : 13 digits of random 2 [PIN] “PIN : XXXXXXXX” 28mm 6 m m 1.2mm 5 m m 5mm 機銘板ラベル共通仕様 機銘板ラベル共通仕様機銘板ラベル共通仕様 機銘板ラベル共通仕様 Sony P/N (9 digits) + Blank (1 digit) + S/N (9 digits) Refer to Page 2 YMMSSSSSS *Must be unique across 5 P/Ns Y : Production Year 2=2012, 3=2013, 4=2014 MM : Production Month 01～12 SSSSSS : Serial Number 000001～999999 (Reset to 000001 every month) #Font : Courier New (Bold) Attach AttachAttach Attach Attach AttachAttach Attach 4 44 4 “SSID : VAIO-XXYYXX” XX : 2 digits of random A～Z YY : 2 digits of random 0～9 “KEY : XXXXXXXXXXXXX” XXXXXXXXXXXXX : 13 digits of random 2～9, A～H “PIN : XXXXXXXX” 1.2mm以上

Report No.: 130124E04 Page 1 CONSTRUCTION PHOTOS OF EUT Report No.: 130124E04 Page 2 Report No.: 130124E04 Page 3 Report No.: 130124E04 Page 4 Report No.: 130124E04 Page 5 Report No.: 130124E04 Page 6

Report No.: SA130124E04 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA130124E04 MODEL NO.: VGP-WAR100 FCC ID: RRK-VGPWAR100 RECEIVED: Jan. 24, 2013 TESTED: Feb. 05, 2013 ISSUED: Mar. 05, 2013 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130124E04 2 of 5 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 5 Report No.: SA130124E04 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130124E04 Original release Mar. 05, 2013 Report No.: SA130124E04 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Wireless Router BRAND NAME: Sony MODEL NO.: VGP-WAR100 TEST SAMPLE: R&D SAMPLE APPLICANT: Alpha Networks Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: VGP-WAR100) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Mar. 05, 2013 ( Elsie Hsu, Specialist ) APPROVED BY : , DATE: Mar. 05, 2013 ( May Chen, Deputy Manager ) Report No.: SA130124E04 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 251.189 1.69 20 0.07374 1.00 --- END ---

Report No.: RF130124E04 1 of 54 Report Format Version 5.1.0 FCC TEST REPORT REPORT NO.: RF130124E04 MODEL NO.: VGP-WAR100 FCC ID: RRK-VGPWAR100 RECEIVED: Jan. 24, 2013 TESTED: Feb. 04 to 06, 2013 ISSUED: Mar. 05, 2013 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130124E04 2 of 54 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD..............................................................................4 1. CERTIFICATION ...........................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................6 2.1 MEASUREMENT UNCERTAINTY ................................................................7 3. GENERAL INFORMATION ...........................................................................8 3.1 GENERAL DESCRIPTION OF EUT ..............................................................8 3.2 DESCRIPTION OF TEST MODES ..............................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............. 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................14 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................15 3.5 CONFIGURATION OF SYSTEM UNDER TEST .........................................16 4. TEST TYPES AND RESULTS .....................................................................17 4.1 CONDUCTED EMISSION MEASUREMENT ..............................................17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................17 4.1.2 TEST INSTRUMENTS ................................................................................17 4.1.3 TEST PROCEDURES .................................................................................18 4.1.4 DEVIATION FROM TEST STANDARD .......................................................18 4.1.5 TEST SETUP ..............................................................................................19 4.1.6 EUT OPERATING CONDITIONS ................................................................19 4.1.7 TEST RESULTS ..........................................................................................20 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................22 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ...22 4.2.2 TEST INSTRUMENTS ................................................................................23 4.2.3 TEST PROCEDURES .................................................................................25 4.2.4 DEVIATION FROM TEST STANDARD .......................................................25 4.2.5 TEST SETUP ..............................................................................................26 4.2.6 EUT OPERATING CONDITIONS ................................................................26 4.2.7 TEST RESULTS ..........................................................................................27 4.3 6dB BANDWIDTH MEASUREMENT ..........................................................40 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................40 4.3.2 TEST INSTRUMENTS ................................................................................40 4.3.3 TEST PROCEDURE ...................................................................................40 4.3.4 DEVIATION FROM TEST STANDARD .......................................................40 4.3.5 TEST SETUP ..............................................................................................40 4.3.6 EUT OPERATING CONDITIONS ................................................................40 4.3.7 TEST RESULTS ..........................................................................................41 4.4 CONDUCTED OUTPUT POWER MEASUREMENT ..................................42 Report No.: RF130124E04 3 of 54 Report Format Version 5.1.0 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ................42 4.4.2 INSTRUMENTS ......................…

Text truncated - open the document above for the full version.

Report No.: 120810E25C Page 1 Reference No.: 121009E05 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120810E25C Page 2 Reference No.: 121009E05 RADIATED EMISSION TEST