RRK-WUSN24V2Wifi Module

Alpha Networks Proprietary and Confidential Information 1 Product External Specifications For 802.11b/g/n 2x2 USB Module (MTK RT5372) Customer : TPV Model P/N TPV : 317GAAWF506ALP Alpha : TPWUSN24V2A1G Model Number: WUS-N24V2 Version : 1.3 Alpha Networks Proprietary and Confidential Information 2 Revision History Rev.DateAuthorReason for Changes 1.02013/07/01Yu-Chun Yu • Draft Release 1.12013/08/06Doreen Chang • Add packing and the photo of module 1.22013/8/19Doreen Chang • Add model number in cover page 1.3 2014/08/01 Doreen Chang • Add FCC ID information Alpha Networks Proprietary and Confidential Information 3 Contents OPERATION MANUAL ....................................................................................................................................................... 4 1.0 SCOPE ............................................................................................................................................................................... 5 1.1 D OCUMENT .................................................................................................................................................................... 5 1.2 P RODUCT FEATURES ...................................................................................................................................................... 5 2.0 REQUIREMENTS ............................................................................................................................................................ 6 2.1 F UNCTIONAL BLOCK DIAGRAM ..................................................................................................................................... 7 2.2 G ENERAL REQUIREMENTS ............................................................................................................................................. 7 2.2.1 IEEE 802.11b Section ............................................................................................................................................ 7 2.2.2 IEEE 802.11g Section ............................................................................................................................................ 8 2.2.3 IEEE 802.11n Section ............................................................................................................................................ 8 2.2.4 General Section ..................................................................................................................................................... 9 2.3 S OFTWARE REQUIREMENTS ......................................................................................................................................... 10 2.3.1 Information .......................................................................................................................................................... 10 2.3.2 Configuration....................................................................................................................................................... 10 2.3.3 Security ................................................................................................................................................................ 10 2.4 M ECHANICAL REQUIREMENTS ..................................................................................................................................... 11 2.5 C OMPATIBILITY REQUIREMENTS ................................................................................................................................. 11 2.6 R EQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY ........................................................................... 11 2.7 E NVIRONMENTAL REQUIREMENTS ............................................................................................................................... 12 2.8 FCC ID...............................................................................................................................................................12 Alpha Networks Proprietary and Confidential Information 4 Operation Manual i.Install Driver 1.install the test driver 2.TX signal command 1select TX/RX site 2select channel,datarate,bandwidth and chain0/1 3for continue TX select conti,press start tx;for continue packets tx,set repeat to 0,press start tx Alpha Networks Proprietary and Confidential Information 5 3.RX signal command (1) select TX/RX site (2) select channel,datarate and chain 0/1 1.1 Scope 1.2 Document This document is to specify the product requirements for 802.11n USB Module with onboard metal antenna . This USB module is based on MTK Ralink single chip that complied with 802.11n standard from 2.4~2.5GHz, and it can be used to provide up to 11Mbps for IEEE 802.11b, 54Mbps for IEEE 802.11g and 300Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11n USB Module offers absolute interoperability with different vendors’ 802.11b, 802.11g, and 802.11n Access Points through the wireless LAN. 1.3 Product Features • Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate • Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate • Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate Alpha Networks Proprietary and Confidential Information 6 • Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication • Supports WEP, 802.1x, WPA and WPA2 enhanced security • Friendly user configuration and diagnostic utilities • Drivers support Windows XP , Vista, Win7. • 6-pin pitch connector USB interface • RoHS compliant • Antenna type : Two onboard metal Antenna 2.0 Requirements The following sections identify the detailed requirements of 802.11b/g/n embedded USB Module Alpha Networks Proprietary and Confidential Information 7 2.1 Functional Block Diagram 2.2 General Requirements 2.2.1 IE…

Text truncated - open the document above for the full version.

Declaration for no non‐US channel operation 2014/8/6 We, Alpha Networks Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: RRK-WUSN24V2 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886-3-5665091 E-mail: [email protected]

Date: 2014/8/6 FCC ID: RRK-WUSN24V2 AUTHORIZATION LETTER To whom it may concern: We, the undersigned Alpha Networks Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15 and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Kelly Tsai / Director Alpha Networks Inc. TEL: 886-3-5636666 FAX: 886-3-5665091 E-mail: [email protected] 2014/8/6

FCC ID: RRK-WUSN24V2 Report No.: RF130809E03D Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch August 21, 2014 Dear Application Examiner, Alpha Networks Inc., wifi module, FCC ID: RRK-WUSN24V2, would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip RF5372. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is RF5372. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Report No.: 130809E03D Page 1 Reference No.: 140730E04 CONSTRUCTION PHOTOS OF EUT Model No.: WUS-N24V2

FCC ID： RRK-WUSN24V2 LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Lebel Here

Report No.: 130809E03D Page 2 Reference No.: 140730E04

Report No.: SA130809E03D 1 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 RF EXPOSURE REPORT REPORT NO.: SA130809E03D MODEL NO.: WUS-N24V2 FCC ID: RRK-WUSN24V2 RECEIVED: July 30, 2014 TESTED: Aug. 12, 2014 ISSUED: Aug. 19, 2014 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130809E03D 2 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 7 Report No.: SA130809E03D 3 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130809E03D Original release Aug. 19, 2014 Report No.: SA130809E03D 5 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130809E03D 6 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table: Transmitter Circuit Brand Model Antenna Type Net Gain (dBi) (Include cable loss) Connector Type Frequency range (MHz to MHz) Chain (0) NANA PIFA2.79NA 2400 ~ 2500 Chain (1) NANA PIFA2.18NA 2400 ~ 2500 Report No.: SA130809E03D 7 of 7 Report Format Version 5.0.1 Reference No.: 140730E04 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) 802.11b FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 51.286 2.79 20 0.01940 1.00 NOTE: Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] = 8.20dBi. 802.11g FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 195.434 2.79 20 0.07391 1.00 NOTE: Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] = 8.20dBi. 802.11n (HT20) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 368.204 5.5 20 0.25991 1.00 NOTE: Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] = 5.5dBi. 802.11n (HT40) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2422 - 2452 307.474 5.5 20 0.21704 1.00 NOTE: Directional gain = 10 log[(10 G1/20 + 10 G2/20 ) 2 / 2] = 5.5dBi. -- END ---

Report No.: RF130809E03D 1 of 59 Report Format Version 5.2.1 Reference No.: 140730E04 FCC TEST REPORT (WLAN 15.247) REPORT NO.: RF130809E03D MODEL NO.: WUS-N24V2 FCC ID: RRK-WUSN24V2 RECEIVED: July 30, 2014 TESTED: Aug. 05 to 12, 2014 ISSUED: Aug. 19, 2014 APPLICANT: Alpha Networks Inc. ADDRESS: No.8 Li-shing 7th Rd., Science-based Industrial Park, Hsinchu, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130809E03D 2 of 59 Report Format Version 5.2.1 Reference No.: 140730E04 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT (WLAN) ........................................................... 8 3.2 DESCRIPTION OF TEST MODES ........................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 12 3.4 DUTY CYCLE OF TEST SIGNAL ........................................................................... 13 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 14 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 15 4. TEST TYPES AND RESULTS ................................................................................ 16 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 16 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 16 4.1.2 TEST INSTRUMENTS ........................................................................................... 16 4.1.3 TEST PROCEDURES ............................................................................................ 17 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 17 4.1.5 TEST SETUP ......................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 18 4.1.7 TEST RESULTS ..................................................................................................... 19 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 21 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 21 4.2.2 TEST INSTRUMENTS ........................................................................................... 22 4.2.3 TEST PROCEDURES ............................................................................................ 23 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 23 4.2.5 TEST SETUP ......................................................................................................... 24 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 24 4.2.7 TEST RESULTS ..................................................................................................... 25 4.3 6DB BANDWIDTH MEASUREMENT ..................................................................... 38 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 38 4.3.2 TEST INSTRUMENTS ........................................................................................... 38 4.3.3 TEST PROCEDURE .............................................................................................. 38 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 38 4.3.5 …

Text truncated - open the document above for the full version.

Report No.: 140407E07 1 of 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 140407E07 2 of 5 RADIATED EMISSION TEST (Below 1GHz) Report No.: 140407E07 3 of 5 Report No.: 140407E07 4 of 5 RADIATED EMISSION TEST (Above 1GHz) Report No.: 140407E07 5 of 5