RYQEA211002WCDMA/LTE Mobile Phone

 DOC20210407 SAFETY INFORMATION GUIDE This product should be operated only with the following designated power supply unit(s). Travel charger: Input: 100-240V, 50/60Hz, 0.35A. Output: 5V, 2A.    RYQEA211002.   

EA211002/EC211002/EC211003 User Guide DOC20210410 Getting started The topics in this section will introduce you to your phone, help you get set up with service, provide an overview of the phone screen, and get you started with basic phone operations. Introduction The following topics describe the basics of using this guide and your new phone. About the user guide Thank you for purchasing your new Smartphone. The following topics explain how best to use this guide to get the most out of your phone. Before using your phone Read the Safety Information Guide that came with your device thoroughly for proper usage. Accessible services may be limited by subscription contract conditions. Descriptions in the user guide Note that most descriptions in this guide are based on your phone’s setup at the time of purchase. Unless otherwise noted, instructions begin from the phone’s Home screen, which is displayed by pressing the Home button. Some operation descriptions may be simplified. Screenshots and key labels Screenshots and other illustrations in this user guide may appear differently on your phone. Key labels are simplified for description purposes and differ from your phone’s display. Other notations In the user guide, the phone may be referred to either as “phone,” “device,” or “handset.” A microSD™ or microSDHC™ card is referred to as an “SD card” or a “memory card.” Set up your phone The following topics give you all the information you need to set up your phone and wireless service for the first time. Parts and functions These topics illustrate your phone’s primary parts and key functions. Note: Your phone’s screens and app layouts are subject to change. This user guide uses sample images only. Part Description Eject SIM tray Insert the SIM Card Tray Pin into the card tray slot and remove the SIM card tray. Fingerprint sensor Unlock your phone with a touch of your finger. Part Description Flash Brighten photos taken indoors or at night. Use as a flashlight to see in dark areas. Front camera Take pictures and record videos while facing the screen. Headset port Plug in a headset (sold separately) to listen to music or for convenient, hands-free conversations. Microphone Transmit your voice electronically for a call, voice recording, or Google Assistant TM . Power key Press to turn the screen on or off. Press and hold to turn the phone on or off. Press along with the Volume down key to take a screenshot. Proximity and light sensor A sensor will automatically dim or brighten the screen according to the environment. Rear camera Take pictures and record videos with a 5MP lens. Receiver Hear the caller and automated prompts. SIM tray Insert your Nano SIM card and microSD for service and additional storage. Speaker Listen to calls, automated prompts, and music. Touch screen View information needed to operate your phone. Access your phone’s features and applications. USB charging & accessory port Connect the USB type C cable (included) for charging, or connect other accessories. Volume keys Adjust the volume for ringtones, media, notifications, and system sounds. CAUTION! Inserting an accessory into the incorrect jack may damage the phone. Battery use The following topics explain how to care for your phone’s non-removable battery. Battery cautions Storage: Avoid storing or leaving the phone with no charge remaining. Saved information and settings may become lost or changed, or the battery may become unusable. Charge once every six months before storing or leaving unused for a long period of time. Charge the battery Follow these instructions to charge your phone’s battery using either the included AC adapter or via USB connection on your computer. Charge using the AC adapter Connect one end of the data cable to the USB port located on the bottom of your phone. Connect the other end to the power adapter. Connect the power adapter to an electrical outlet to fully charge your phone. Use the power adapter that comes with your phone; using other adapters may damage your phone. Charging your phone with a USB cable connected to a laptop will take longer than with the power adapter. The phone will power off automatically when the battery is too low. Charge the battery if this happens. When the battery is critically low, the phone may need a few minutes to build a charge before turning back on. Playing games or performing other activities while charging may drain the battery and cause it to power off. The battery will gradually discharge if it is left unused for a long period of time. Before using the battery again, you must recharge it in order to power on and use your phone normally. Install a SIM/SD Card Insert a Nano SIM/microSD card Insert the SIM Card Tray Pin into the card tray slot and remove the SIM card tray. Place the Nano SIM card and MicroSD card into the tray. Gently slide the card tray back into the slot. Mount an SD card With an SD card inserted, swipe up from the Home screen to access Apps and tap Settings. Tap Storage> SD CARD. Tap MOUNT on the prompted screen. Unmount an SD card Always unmount an SD card before removing it from your phone to avoid corrupting or damaging the files on the SD card. From the Home screen, swipe up to access Apps and tap Settings. Tap Storage>. Your SD card is now safely unmounted. To use this SD card again, you will need to remove (see below) and mount it again. Remove an SD card Insert the SIM Card Tray Pin into the card tray slot and remove the SIM card tray. Pull out the card tray slot and remove the SD card. Format an SD card When you insert an optional SD card for the first time, it is recommended that you format it on your phone. Note: Formatting your SD card will erase all files on the card. Make sure to back up your files in another location before formatting. From the Home screen, swipe up to access Apps and tap Settings. Tap Storage> SD CARD. Tap Menu> Storage settings. Select Format or Format as internal, then tap FORMAT SD CARD to confirm. All data on…

Text truncated - open the document above for the full version.

FIH CO., LTD. No.4, Minsheng St., Tu-Cheng Dist., New Taipei City 23679, Taiwan Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: RYQEA211002. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Part List Tune up procedure U-NII Device SW Security Statement Antenna Report (EA211002, EC211002, EC211003)BlkDia (EA211002, EC211002, EC211003)Schem (EA211002, EC211002, EC211003)OpDes (EA211002, EC211002, EC211003)BOM (EA211002, EC211002, EC211003)Tuneup procedure (EA211002, EC211002, EC211003)U-NII Device SW Security Statement (EA211002, EC211002, EC211003)Antenna Report The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name External Photos Internal Photos Test Setup Photos Manual (EA211002, EC211002, EC211003)ExtPho (EA211002, EC211002, EC211003)IntPho (EA211002, EC211002, EC211003)Tsup (EA211002, EC211002, EC211003)UserMan Planned Release Date STC: If no date is given, 180 days from grant date will be used. Sincerely, (signature) (printed name) Barry Tsai / Manager (Date) June 28, 2021

FIH CO., LTD. No.4, Minsheng St., Tu-Cheng Dist., New Taipei City 23679, Taiwan Declaration of Authorization We Name: FIH CO., LTD. Address: No.4, Minsheng St., Tu-Cheng Dist. City: New Taipei City Country: Taiwan Declare that: Name Representative of agent: Louis Hsu Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, City: Hsinchu County, Country Taiwan is authorized to apply for FCC Certification of the following product(s): Product description: WCDMA/LTE Mobile Phone Type designation: EA211002, EC211002, EC211003 Trademark: FIH FCC ID: RYQEA211002 on our behalf. Date: June 28, 2021 City: New Taipei City Name: Barry Tsai Function: Manager Signature: .

FIH CO., LTD No.4, Mingsheng St., Tu-Cheng Dist.,New Taipei City 23679, Taiwan Date: Jul 19, 2021 Product Equality Declaration We, FIH CO., LTD declare on our sole responsibility for the product of EA211002 as below: ● EA211002 and EC211002, EC211003 are operator variants. ● EA211002 and EC211002, EC211003 HW are identical. ● EA211002 and EC211002, EC211003 SW difference: o ATT and Cricket unique UI/UX settings and values depending on 18384. o Default features according to 13289 and 13340 requested by ATT/CKT. o Difference of camera feature among EA211002/EC211002/EC211003 would be EA211002/EC211002 with Rear camera 8MP and Front camera 5MP, while EC211003 downgraded with Rear camera 8MP and Front camera 2MP. Note that this is realized via SW change based on same HW. o No change of RF/audio parameters o No change/Affection of charging/battery part including the following items of CTIA Certification for Battery System Compliance to IEEE 1725. ▪ The temperature protective point of charging and discharging for the battery(5.15); ▪ The temperature rise of host when normal working(5.8); ▪ Damage of conducted transient voltages on the the host device's charge control circuitry or the battery pack's safety circuitry (6.2); ▪ Performance of system level charge over current or over voltage protection during a worst case single fault condition as identified in section 6.6 (6.7); ▪ Charge algorithm(6.11); ▪ Intergrity of communication interface (6.13); ▪ Charge time period (6.12); Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Barry Tsai Position/Title: Manager Applicant: FIH CO., LTD E-Mail: [email protected]

Report No：2150987R Page: 1 of 19  EUT External Photograph (1) EUT Photo (2) EUT Photo Report No：2150987R Page: 2 of 19 (3) EUT Photo (4) EUT Photo Report No：2150987R Page: 3 of 19 (5) EUT Photo (6) EUT Photo Report No：2150987R Page: 4 of 19 (7) EUT Photo (8) EUT Photo

Label on phone back cover

Font: 10pt Barcode height: 5mm Label paper size: 55*65mm

IMEI: 351244760000000 SKU: DEMK4112 MODEL: EC211002 FCC ID: RYQEA211002 Voltage rating: 3.85V Toll free#: 1-800-274-2538 Made in Vietnam WARNING : Non-removable battery cover and battery. Do not attempt to disassemble the device or remove the battery. Doing so may result in personal injury and damage to the battery or device. AVISO : Ni la tapa de la batería ni la batería son extraible. No intentes desarmar el teléfono ni quitar la batería. Hacer esto puede causar lesiones corporales y dañar la batería o el teléfono. MFD: 210527 H/W: V2.0 Font: 10pt Barcode height: 5mm Label size: 60*80mm

IMEI: 357408400000000 SKU: DEMN5012 MODEL: EC211003 FCC ID: RYQEA211002 Voltage rating: 3.85V Toll free#: 1-800-274-2538 Made in Vietnam WARNING : Non-removable battery cover and battery. Do not attempt to disassemble the device or remove the battery. Doing so may result in personal injury and damage to the battery or device. AVISO : Ni la tapa de la batería ni la batería son extraible. No intentes desarmar el teléfono ni quitar la batería. Hacer esto puede causar lesiones corporales y dañar la batería o el teléfono. MFD: 210527 H/W: V2.0 Font: 10pt Barcode height: 5mm Label size: 60*80mm

FCC E-Label Information Model: EA211002, EC211002, EC211003 A. Information to be displayed The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes Yes Compliance statement No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 No Yes Describe any other FCC regulatory information included in e-label 1 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to 784748 D02 e labelling v01 section II D 3(b) Images of the e-label screen are provided below: Model EA211002: Model EC211002: Model EC211003: B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > About Phone >Regulatory labels No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or SIM/USIM card are required to access the information. Yes C. Labeling for Importation and Purchasing Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The device will have required physical label on the packaging, which include the device’s FCC ID. D. Other considerations 1. Electronic labeling information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided.

Report No：2150987R Page: 5 of 19 EUT Internal Photograph (1) EUT Photo (2) EUT Photo Report No：2150987R Page: 6 of 19 (3) EUT Photo (4) EUT Photo Report No：2150987R Page: 7 of 19 (5) EUT Photo (6) EUT Photo Report No：2150987R Page: 8 of 19 (7) EUT Photo (8) EUT Photo Report No：2150987R Page: 9 of 19 (9) EUT Photo (10) EUT Photo (11) EUT Photo Report No：2150987R Page: 10 of 19 (12) EUT Photo Report No：2150987R Page: 11 of 19 (13) EUT Photo (14) EUT Photo Report No：2150987R Page: 12 of 19 (15) EUT Photo (16) EUT Photo Report No：2150987R Page: 13 of 19 (17) EUT Photo (18) EUT Photo Report No：2150987R Page: 14 of 19 (19) EUT Photo (20) EUT Photo Report No：2150987R Page: 15 of 19 (21) EUT Photo (22) EUT Photo Report No：2150987R Page: 16 of 19 (23) EUT Photo (24) EUT Photo Report No：2150987R Page: 17 of 19 (25) EUT Photo (Antenna_LTE diversity, GPS, WiFi & BT) (26) EUT Photo (Antenna_WiFi & BT) Report No：2150987R Page: 18 of 19 (27) EUT Photo (Antenna_LTE diversity) Report No：2150987R Page: 19 of 19 (28) EUT Photo (Antenna_LTE main) (29) EUT Photo (Antenna_LTE main)

Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 1 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 RF Exposure Evaluation Declaration Product Name ：WCDMA/LTE Mobile Phone Trade Name ：FIH Model No. ：EA211002, EC211002, EC211003 FCC ID ：RYQEA211002 Applicant ： FIH CO., LTD. Address ： No.4, Minsheng St., Tu-Cheng Dist., New Taipei City 23679, Taiwan Date of Receipt ：May. 18, 2021 Date of Declaration ： Jul. 12, 2021 Report No. ： 2150987R-E3082100013 Report Version ： V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd.. Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 2 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 RF Exposure Evaluation Declaration Product Name : WCDMA/LTE Mobile Phone Applicant : FIH CO., LTD. Address : No.4, Minsheng St., Tu-Cheng Dist., New Taipei City 23679, Taiwan Manufacturer : FIH CO., LTD. Address : No.4, Minsheng St., Tu-Cheng Dist., New Taipei City 23679, Taiwan Trade Name : FIH Model No. : EA211002, EC211002, EC211003 FCC ID : RYQEA211002 EUT Voltage ： DC 5V (adapter or host equipment) DC 3.85V for battery Testing Voltage ： AC 120V/60Hz (power by adapter), DC 5V Applicable Standard : FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Tested By : ( Scott Chang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 3 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 Revision History Version Description Issued Date V1.0 Initial issue of report Jul. 12, 2021 Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 4 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 1.1. Test Facility Ambient conditions in the laboratory: Items Test Item Required Test Site Temperature (°C) Peak Output Power 15 - 35 2 Humidity (%RH) 25 - 75 Note: Test site information refers to Laboratory Information. Laboratory Information USA : FCC Registration Number: TW3024 Canada : IC Registration Number: 22397-1 / 22397-2 / 22397-3 The address and introduction of DEKRA Testing and Certification Co., Ltd. laboratories can be founded in our Web site: http://www.dekra.com.tw If you have any comments, please don’t hesitate to contact us. Our test sites as below: Test Laboratory DEKRA Testing and Certification Co., Ltd. Address 1. No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. 2. No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. Phone number 1. +886-3-582-8001 2. +886-3-582-8001 Fax number 1. +886-3-582-8958 2. +886-3-582-8958 E mail address [email protected] Website http://www.dekra.com.tw Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 5 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 1.2. List of Test Equipment Conducted Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date High Speed Peak Power Meter Dual Input Anritsu ML2496A 1602004 2020/11/30 2021/11/29 Pulse Power Sensor Anritsu MA2411B 1531043 2020/11/30 2021/11/29 EXA Signal Analyzer Keysight N9010A MY51440132 2021/01/25 2022/01/24 Pulse Power Sensor Anritsu MA2411B 1531044 2020/11/30 2021/11/29 Power Meter Keysight 8990B MY51000248 2021/05/21 2022/05/20 Power Sensor Keysight N1923A MY57240005 2021/05/21 2022/05/20 Spectrum Analyzer Keysight N9030B MY57140404 2021/05/14 2022/05/13 Spectrum Analyzer Keysight N9010B MY57110159 2021/03/29 2022/03/28 Spectrum Analyzer Agilent N9010A US47140172 2020/06/18 2021/06/17 Wideband Radio Communication Tester R&S CMW500 106071 2021/01/27 2022/01/26 Wireless Conn. Tester R&S CMW500 157118 2020/07/23 2021/07/22 Note: All equipment upon which need to calibrated are with calibration period of 1 year. 1.3. Uncertainty Test item Uncertainty Peak Output Power ± 1.27 dB Determining compliance shall be based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Report No. 2150987R-E3082100013 TEL : +886-3-582-8001 Page Number : 6 of 9 FAX : +886-3-582-8958 Issued Date: Jul. 12, 2021 Report Version : V1.0 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 --…

Text truncated - open the document above for the full version.

Project No.: 2105T090 Page 1 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 FCC SAR Test Report FCC ID: RYQEA211002 Report No. : BTL-FCC SAR-1-2105T090 Equipment : WCDMA/LTE Mobile Phone Model Name : EA211002 Brand Name : FIH Applicant : FIH CO., LTD Address : No.4, Mingsheng St., Tu-Cheng Dist.,New Taipei City 23679, Taiwan Manufacturer : FIH CO., LTD Address : No.4, Mingsheng St., Tu-Cheng Dist.,New Taipei City 23679, Taiwan Radio Function : WLAN 2.4G, WLAN 5G, Bluetooth, WCDMA Band II, IV, V and LTE Band 2, 4, 5, 12, 14, 30 Standard(s) : KDB941225 D01 3G SAR Procedures v03r01 KDB941225 D05 SAR for LTE Devices v02r05 KDB941225 D06 Hotspot Mode V02r01 KDB447498 D01 General RF Exposure Guidance v06 KDB248227 D01 802.11 Wi-Fi SAR v02r02 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB865664 D02 SAR Reporting v01r02 KDB648474 D04 Handset SAR v01r03 KDB690783 D01 SAR Listings on Grants v01r03 Date of Receipt : 2021/5/17 Date of Test : 2021/6/16 ~ 2021/6/25 Issued Date : 2021/7/21 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Jerry Chuang, Engineer Approved by : Peter Chen, Section Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Project No.: 2105T090 Page 2 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL’s reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority’s logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Project No.: 2105T090 Page 3 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 Table of Contents Page 1 GENERAL INFORMATION 6 1.1 GENERAL DESCRIPTION OF EUT 6 2 SUMMARY OF SAR MEASUREMENT 7 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 2.3 WLAN ANTENNA INFORMATION: 9 2.4 WWAN ANTENNA INFORMATION: 9 2.4 THE MAXIMUM SAR 1G VALUES 10 2.5 LABORATORY ENVIRONMENT 11 2.6 MAIN TEST INSTRUMENTS 12 3 SAR MEASUREMENTS SYSTEM CONFIGURATION 13 3.1 SAR MEASUREMENT SETUP 13 3.1.1 TEST SETUP LAYOUT 13 3.2 DASY5 E-FIELD PROBE SYSTEM 14 3.2.1 EX3DV4 PROBE SPECIFICATION 14 3.2.2 E-FIELD PROBE CALIBRATION 15 3.2.3 OTHER TEST EQUIPMENT 16 3.2.4 SCANNING PROCEDURE 17 3.2.5 DATA STORAGE AND EVALUATION 18 3.2.6 DATA EVALUATION BY SEMCAD 19 4 TISSUE-EQUIVALENT LIQUID 21 4.1 TISSUE-EQUIVALENT LIQUID INGREDIENTS 21 4.2 TISSUE-EQUIVALENT LIQUID PROPERTIES 21 5 SYSTEM CHECK 23 5.1 DESCRIPTION OF SYSTEM CHECK 23 5.2 DESCRIPTION OF SYSTEM CHECK 24 6 OPERATIONAL CONDITIONS DURING TEST 25 6.1 GENERAL DESCRIPTION OF TEST PROCEDURES 25 6.2 TEST POSITION OF PORTABLE DEVICES 25 6.2.1 BODY-WORN TEST CONFIGURATION 26 6.2.2 HOTSPOT TEST CONFIGURATION 26 6.2.3 PRODUCT SPECIFIC 10-G SAR TEST CONFIGURATION 26 6.3 TEST POSITION OF PORTABLE DEVICES 27 7 SAR MEASUREMENT VARIABILITY AND UNCERTAINTY 28 7.1 SAR MEASUREMENT VARIABILITY 28 7.2 WCDMA TEST CONFIGURATION 29 7.3 LTE TEST CONFIGURATION 34 8 CONDUCTED POWER RESULTS 35 8.1 UMTS BAND 35 8.2 LTE BAND 39 Project No.: 2105T090 Page 4 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 Table of Contents Page 8.3 CONDUCTED POWER MEASUREMENT RESULTS OF BLUETOOTH 55 8.4 CONDUCTED POWER MEASUREMENTS OF WI-FI 2.4GHZ BAND 56 8.5 CONDUCTED POWER MEASUREMENTS OF 5G UNII_1 57 8.6 CONDUCTED POWER MEASUREMENTS OF 5G UNII_2A 58 8.7 CONDUCTED POWER MEASUREMENTS OF 5G UNII_2C 59 8.8 CONDUCTED POWER MEASUREMENTS OF 5G UNII_3 60 8.9 CONDUCTED POWER MEASUREMENTS OF 5G UNII_1 61 8.10 CONDUCTED POWER MEASUREMENTS OF 5G UNII_2A 62 8.11 CONDUCTED POWER MEASUREMENTS OF 5G UNII_2C 63 8.12 CONDUCTED POWER MEASUREMENTS OF 5G UNII_3 64 8.13 SARTEST RESULTS 65 9 SAR TEST RESULTS 66 9.1 BODY SAR TEST RESULTS 66 10. MULTIPLE TRANSMITTER EVALUATION 75 10.1 STAND-ALONE SAR TEST EXCLUSION 75 10.2 SIMULTANEOUS TRANSMISSION CONDITIONS 75 10.3 ABOUT BT/WIFI AND WWAN 76 11. TEST LAYOUT 77 Project No.: 2105T090 Page 5 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. 2021/6/28 R01 Add Simultaneous Transmission in summary, Add extremity SAR note 2021/7/21 Project No.: 2105T090 Page 6 of 79 Report Version: R01 Report No.: BTL-FCC SAR-1-2105T090 1 GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF EUT Equipment WCDMA/LTE Mobile Phone Model Name EA…

Text truncated - open the document above for the full version.

Test Laboratory: Date: 2021/6/18 System Check_H750_210618 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C Medium parameters used: f = 750 MHz; σ = 0.903 S/m; ε r = 41.769; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1289; Calibrated: 2021/5/7 - Probe: ES3DV3 - SN3253; ConvF(6.43, 6.43, 6.43); Calibrated: 2021/5/24; - Sensor-Surface: 3mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor- Surface: 3mm (Mechanical Surface Detection) - Phantom: Twin-SAM V5.0_left; Type: QD 000 P40 CD; Serial: xxxx Configuration/Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.64 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 86.625 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 3.20 W/kg SAR(1 g) = 2.2 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 2.55 W/kg 0 dB = 2.64 W/kg = 4.22 dBW/kg Test Laboratory: Date: 2021/6/21 System Check_H835_210621 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0C; Liquid Temperature: 22.0C Medium parameters used: f = 835 MHz; σ = 0.901 S/m; ε r = 43.031; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1289; Calibrated: 2021/5/7 - Probe: ES3DV3 - SN3253; ConvF(6.22, 6.22, 6.22); Calibrated: 2021/5/24; - Sensor-Surface: 3mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor- Surface: 3mm (Mechanical Surface Detection) - Phantom: Twin-SAM V5.0_left; Type: QD 000 P40 CD; Serial: xxxx Configuration/Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.15 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 69.661 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 3.45 W/kg SAR(1…

Text truncated - open the document above for the full version.