S67WSDE-670GNIEEE802.11b/g/n Wireless LAN module

RF Test Guide Rev. 1 Issued: 19-Feb-2013 RF Test User Manual Powers the Internet of Things R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 2 Disclaimer and copyright notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. All liability, including liability for infringement of any proprietary rights, relating to use of information in this document is disclaimed. No licenses express or implied, by estoppels or otherwise, to any intellectual property rights are granted herein. WiSmart™ and WiCReal TM are trademarks owned by eConais Wi-Fi™ is a trademark owned by Wi-Fi Alliance, U.S.A. All other trade names, trademarks and registered trademarks are property of their respective owners Copyright © 2012 eConais R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 3 Table of Contents Disclaimer and copyright notice ............................................................................................................... 2 Table of Contents ...................................................................................................................................... 3 1 Introduction ....................................................................................................................................... 4 2 Test Setup .......................................................................................................................................... 4 3 Equipment.......................................................................................................................................... 5 4 User Interface .................................................................................................................................... 6 5 Contact Information .......................................................................................................................... 8 APPENDIX A - Federal Communication Commission Interference Statement ......................................... 9 APPENDIX B – Industry Canada Statement ............................................................................................. 11 R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 4 1 Introduction This document describes the RF test. This test is intended to run in a test lab where the appropriate equipment will have been placed in such a way that will be able to measure the rf performance of the module. The user sends the commands to the module using a Microsoft Windows Application. The communication is done over the serial port. 2 Test Setup The test is performed using eConais’ evaluation board. The board is supplied through the usb cable from a power source able to supply at least 300mA. The evaluation board is communicating with the host (PC) through a serial cable connected to the 9- pin dsub connector that is mounted on the EVB. R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 5 3 Equipment Laptop: The laptop will have Windows 7. It will run an application called RF test tool that will handle the communication between the UI and the module. Usb to Serial cable: The PC and the test board will be connected through an Usb to Serial cable, unless the PC has a serial port present on board. Usb Cable: The evaluation board will be power through this cable that will be connected either on a PC or an external power source. R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 6 4 User Interface 1) Serial Interface Configuration: The user should select the serial port through which the PC is connected to the evaluation board. This can be done by selecting the appropriate port from the combo box and press the “Open” button. The combo box will display all the available com ports. 2) Test Parameters: R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 7 Rate: Select any of the available rates (Mbit/s) at which the test will be performed. Channel: Select any of the available channels (1-14) at which the test will be performed. The user can also configure the following parameters: Tx Gain: By selecting the MAX value, the module will transmit at its maximum output power. If the user wants to reduce the output power, he must select one of the other available options. Idle Time: This is the idle time between consecutive transmissions, in milliseconds. There is an initial inter-transmission delay of 120ms . Number of Frames: The number of frames that are going to be transmitted. In case “INF” (infinite) is selected, the board will transmit continuously, until the “Tx Stop” button is pressed Frame Length: Length of each transmitted frame in bytes. In case “CONT” is selected, the module is transmitting continuously. In this case the “Idle time” is not taken into account. Tx Generate Pattern: Pattern of the packet contents. After all the configuration parameters have been defined, the user can press the “Tx Start” button. After pressing the “Tx Start” button, its caption is altered to “Tx Stop”. The module will start to transmit according to the parameters that have been selected. In order to stop the transmission the user should press the “Tx Stop” button. R RF Test Guide REV.1, 19-Feb-2013 © eConais, Proprietary and Confidential 8 5 Contact Information eConais R & D Patras Science Park 26504 Patra, Greece tel: +302610911561 fax: +302610911561 email: [email protected] Internet: www.econais.com eConais United States Global Sales Office 510 N. First st. #210 San Jose, CA, 95112, USA tel: +1-408-884-7914 email: [email protected] Internet: www.econais.com Japan Office Contact: Hitoshi Yagi 203, 1-36-9, Momoi Suginami-ku Tokyo 167-0034 tel: 080-5172-7449 em…

Text truncated - open the document above for the full version.

Date: 2013/5/3 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: S67WSDE-670GN Product name: IEEE802.11b/g/n Wireless LAN module To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model WSDE-670GN to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Signature : Name and Job Title. : DIMITRIS LEONARDOS/ VP Product Manager. E-mail [email protected] Tel. +302610911561

Confidentiality Request Letter Date: 2013/5/3 Federal Communications Commission Authorization and Evaluation Division FCC ID：S67WSDE-670GN Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Signature : Name and Job Title. : DIMITRIS LEONARDOS/ VP Product Manager. E-mail [email protected] Tel. +302610911561

RF_734_00, Issue 1 Modular Approval Request FCC (per DA 00-1407) FCC ID: S67WSDE-670GN Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. The modular has a shielding Case. Please refer to EUT Photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The component number is NRX600 3. The modular transmitter must have its own power supply regulation. The component number is FAN2558S12X 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. The device has no antenna Connector. And no external amplifier will be used with this modular. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. This modular is tested under stand-alone configuration. Please refer to Test setup photo. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The modular transmitter is labeled with its own FCC ID number. Please refer to label sample and label location. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instruction s must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular complies with this requirement. Please refer to user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The device complies with this requirement. Please refer to RF exposure report. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): __________________ Date: ___03 May 2013____ Signature: ___________________________

eConais SA Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Date: May 3, 2013 Subject: Ad Hoc Mode Function Declaration FCC ID: S67WSDE-670GN IC ID: 11069A-WSDE670GN To Whom it may concern, We, eConais SA declare that the device does not support any non-US channels and country code selection in all the operational mode(s) for the following product. Regards, Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Signature : Name and Job Title. : DIMITRIS LEONARDOS/ VP Product Manager. E-mail [email protected] Tel. +302610911561

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Project No.: 341701 Page No. : 1 of 4 Photographs of EUT International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Project No.: 341701 Page No. : 2 of 4

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Project No.: 341701 Page No. : 3 of 4 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Project No.: 341701 Page No. : 4 of 4

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FA341701 Page : 1 of 4 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : S67WSDE-670GN Equipment : IEEE802.11b/g/n Wireless LAN module Model No. : WSDE-670GN Brand Name : eConais Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Standard : 47 CFR FCC Part 2.1091 Received Date : Apr. 17, 2013 Tested Date : Apr. 17 ~ Apr. 23, 2013 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FA341701 Page : 2 of 4 Report Version: Rev. 01 Table of Contents 1 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 4 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 4 1.2 MPE EVALUATION FORMULA ............................................................................................................. 4 1.3 MPE EVALUATION RESULTS .............................................................................................................. 4 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FA341701 Page : 3 of 4 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA341701 Rev. 01 Initial issue Apr. 25, 2013 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FA341701 Page : 4 of 4 Report Version: Rev. 01 1 MPE EVALUATION OF MOBILE DEVICES Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. 1.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm 2 ) Averaging Time (minutes) 300~1500 F/1500 30 1500~100000 1.0 30 1.2 MPE EVALUATION FORMULA Pd = 2 **4RPi Pt Where Pd= Power density in mW/cm 2 Pt= EIRP in Mw Pi= 3.1416 R= Measurement distance 1.3 MPE EVALUATION RESULTS Frequency Range (MHz) Maximum Conducted Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412~2462 21.89 0.5 20 0.034 1 ══END══

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FR341701 Page : 1 of 47 Report Version: Rev. 01 FCC Test Report FCC ID : S67WSDE-670GN Equipment : IEEE802.11b/g/n Wireless LAN module Model No. : WSDE-670GN Brand Name : eConais Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Standard : 47 CFR FCC Part 15.247 Received Date : Apr. 17, 2013 Tested Date : Apr. 17 ~ Apr. 23, 2013 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FR341701 Page : 2 of 47 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Test Setup Chart .................................................................................................................................... 7 1.3 Local Support Equipment List ................................................................................................................ 7 1.4 The Equipment List ................................................................................................................................ 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Condition ................................................................................................................................. 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 TRANSMITTER TEST RESULTS ........................................................................................................ 12 3.1 Conducted Emissions ........................................................................................................................... 12 3.2 6dB and Occupied Bandwidth .............................................................................................................. 15 3.3 RF Output Power .................................................................................................................................. 18 3.4 Power Spectral Density ........................................................................................................................ 20 3.5 Unwanted Emissions into Restricted Frequency Bands ...................................................................... 22 3.6 Unwanted Emissions into Non-Restricted Frequency Bands .............................................................. 44 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FR341701 Page : 3 of 47 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR341701 Rev. 01 Initial issue Apr. 25, 2013 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FR341701 Page : 4 of 47 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 Conducted Emissions [dBuV]: 0.151MHz 55.03 (Margin 10.93dB) - QP Pass 15.247(d) 15.209 Radiated Emissions [dBuV/m at 3m]: 192.96MHz 42.49 (Margin 1.01dB) - QP Pass 15.247(b)(3) Fundamental Emission Output Power Power [dBm]: 11b: 19.62 11g: 21.89 HT20: 21.16 Pass 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit Pass 15.247(e) Power Spectral Density Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FR341701 Page : 5 of 47 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 2400-2483.5 b 2412-2462 1-11 [11] 1 1-11 Mbps 2400-2483.5 g 2412-2462 1-11 [11] 1 6-54 Mbps 2400-2483.5 n (HT20) 2412-2462 1-11 [11] 1 MCS 0-7 Note 1: RF output power specifies that Maximum Peak Conducted Output Power. Note 2: 802.11b uses a combination of DSSS-DBPSK, DQPSK, CCK modulation. Note 3: 802.11g/n uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation. 1.1.2 Antenna Details Ant. No. Type Gain (dBi) Connector Remark 1 CHIP 0.5 --- --- 1.1.3 EUT Operational Condition Supply Voltage AC mains DC Type of DC Source Internal DC supply External DC adapter From Host International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Re…

Text truncated - open the document above for the full version.

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 1 of 27 Report Version: Rev. 01 FCC 15B Test Report Equipment : IEEE802.11b/g/n Wireless LAN module Model No. : WSDE-670GN Brand Name : eConais Applicant : eConais SA Address : Patras, Science Park, Stadioy Str, Platani, PATRAS, 26504 Standard : FCC Part 15, Subpart B, Class B Canada Standard ICES-003 Issue 5 ANSI C63.4:2003 Received Date : Apr. 17, 2013 Tested Date : Apr. 17 ~ Apr. 23, 2013 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Kent Chen / Assistant Manager Ty: XXX International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 2 of 27 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Test Setup Chart .................................................................................................................................... 7 1.3 Local Support Equipment List ................................................................................................................ 7 1.4 The Equipment List ................................................................................................................................ 8 1.5 Testing Applied Standards ..................................................................................................................... 9 1.6 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Condition ................................................................................................................................. 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 EMISSION TESTS RESULTS ............................................................................................................. 11 3.1 Conducted Emissions ........................................................................................................................... 11 3.2 Radiated Emissions .............................................................................................................................. 14 4 PHOTOGRAPHS OF THE TEST CONFIGURATION ......................................................................... 24 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 3 of 27 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FD341701 Rev. 01 Initial issue Apr. 25, 2013 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 4 of 27 Report Version: Rev. 01 Summary of Test Results FCC Part 15, Subpart B Emission Tests Ref. Std. Clause Test Standard Test Items Measured Result 15.107 FCC Part 15, Subpart B, Class B Conducted Emissions [dBuV]: 0.154MHz 46.31 (Margin 9.47dB) - AV Pass 15.109 FCC Part 15, Subpart B, Class B Radiated Emissions [dBuV/m at 3m]: 192.96MHz 42.48 (Margin 1.02dB) - QP Pass International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 5 of 27 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 2400-2483.5 b 2412-2462 1-11 [11] 1 1-11 Mbps 2400-2483.5 g 2412-2462 1-11 [11] 1 6-54 Mbps 2400-2483.5 n (HT20) 2412-2462 1-11 [11] 1 MCS 0-7 Note 1: RF output power specifies that Maximum Peak Conducted Output Power. Note 2: 802.11b uses a combination of DSSS-DBPSK, DQPSK, CCK modulation. Note 3: 802.11g/n uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation. 1.1.2 Antenna Details Ant. No. Type Gain (dBi) Connector Remark 1 CHIP 0.5 --- --- 1.1.3 EUT Operational Condition Supply Voltage AC mains DC Type of DC Source Internal DC supply External DC adapter From Host International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 6 of 27 Report Version: Rev. 01 1.1.4 Accessories N/A 1.1.5 Channel List Frequency band (MHz) 802.11 b / g / n HT20 Channel Frequency(MHz) 1 2412 2 2417 3 2422 4 2427 5 2432 6 2437 7 2442 8 2447 9 2452 10 2457 11 2462 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.: FD341701 Page : 7 of 27 Report Version: Rev. 01 1.2 Test Setup Chart Test Setup Diagram 1.3 Local Support Equipment List Support Equipment List No. Equipment Brand Model S/N FCC ID Length (m) 1 Notebook DELL E5420 --- DoC USB 1.…

Text truncated - open the document above for the full version.

International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.:FR 341701 Page: : 1 of 4 Report Version: Rev. 01 Photographs of the Test Configuration Conducted Emission Test International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.:FR 341701 Page: : 2 of 4 Report Version: Rev. 01 International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-271-8666 Fax: 886-3-318-0155 Report No.:FR 341701 Page: : 3 of 4 Report Version: Rev. 01 Radiated Emission Test International Certification Corp. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. Tel:…

Text truncated - open the document above for the full version.