S8WTTDTagg Tracking Device

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

RF Exposure Report Report No.: SA150115C08 FCC ID: S8WTTD Test Model: TTD Received Date: Jan. 15, 2015 Test Date: Jan. 27 ~ Feb. 06, 2015 Issued Date: Feb. 10, 2015 Applicant: Whistle Labs, Inc Address: 3180 18th Street, Suite 102, San Francisco, CA 94110 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150115C08 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................... 3 1 Certificate of Conformity ................................................................................................................... 4 2 Evaluation Result ............................................................................................................................... 5 2.1 SAR Test Exclusion Thresholds ........................................................................................................ 5 2.2 Smallest Distance from the Antenna And Radiating Structures Or Outer Surface Of The Device ..... 5 2.3 EUT Operating Conditions ................................................................................................................ 6 2.4 Maximum measured transmitter power ............................................................................................. 7 2.5 SAR Test Exclusion Thresholds ........................................................................................................ 7 Report No.: SA150115C08 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150115C08 Original release Feb. 10, 2015 Report No.: SA150115C08 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Tagg Tracking Device Brand: Ta g g Test Model: TTD Sample Status: Engineering sample Applicant: Whistle Labs, Inc Test Date: Jan. 27 ~ Feb. 06, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date:Feb. 10, 2015 Celine Chou / Specialist Approved by : , Date:Feb. 10, 2015 Dylan Chiou / Project Engineer Report No.: SA150115C08 Page No. 5 / 7 Report Format Version: 6.1.1 2 Evaluation Result 2.1 SAR Test Exclusion Thresholds Following FCC KDB 447498 D03 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusi…

Text truncated - open the document above for the full version.

Report No.: RF150115C08 Page No. 1 / 38 Report Format Version: 6.1.1 FCC Test Report (PART 22) Report No.: RF150115C08 FCC ID: S8WTTD Test Model: TTD Received Date: Jan. 15, 2015 Test Date: Jan. 27 ~ Feb. 06, 2015 Issued Date: Feb. 10, 2015 Applicant: Whistle Labs, Inc Address: 3180 18th Street, Suite 102, San Francisco, CA 94110 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150115C08 Page No. 2 / 38 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Test Site And Instruments ................................................................................................................... 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Configuration Of System Under Test ................................................................................................... 8 3.2.1 Description Of Support Units ............................................................................................................... 9 3.3 Test Mode Applicability and Tested Channel Detail .......................................................................... 10 3.4 EUT Operating Conditions ................................................................................................................. 11 3.5 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Output Power Measurement ............................................................................................................. 12 4.1.1 Limits of Output Power Measurement ............................................................................................... 12 4.1.2 Test Procedures ................................................................................................................................. 12 4.1.3 Test Setup .......................................................................................................................................... 13 4.1.4 Test Results ....................................................................................................................................... 14 4.2 Frequency Stability Measurement .................................................................................................... 16 4.2.1 Limits of Frequency Stabiliity Measurement ..................................................................................... 16 4.2.2 Test Procedure .................................................................................................................................. 16 4.2.3 Test Setup .......................................................................................................................................... 16 4.2.4 Test Results ....................................................................................................................................... 17 4.3 Occupied Bandwidth Measurement .................................................................................................. 18 4.3.1 Test Procedure .................................................................................................................................. 18 4.3.2 Test Setup .......................................................................................................................................... 18 4.3.3 Test Result ..............................…

Text truncated - open the document above for the full version.

Report No.: RF150115C08-1 Page No. 1 / 38 Report Format Version: 6.1.1 FCC Test Report (PART 24) Report No.: RF150115C08-1 FCC ID: S8WTTD Test Model: TTD Received Date: Jan. 15, 2015 Test Date: Jan. 27 ~ Feb. 06, 2015 Issued Date: Feb. 10, 2015 Applicant: Whistle Labs, Inc Address: 3180 18th Street, Suite 102, San Francisco, CA 94110 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150115C08-1 Page No. 2 / 38 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Test Site And Instruments ................................................................................................................... 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Configuration Of System Under Test ................................................................................................... 8 3.2.1 Description Of Support Units ............................................................................................................... 8 3.3 Test Mode Applicability and Tested Channel Detail ............................................................................ 9 3.4 EUT Operating Conditions ................................................................................................................. 11 3.5 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Output Power Measurement ............................................................................................................. 12 4.1.1 Limits of Output Power Measurement ............................................................................................... 12 4.1.2 Test Procedures ................................................................................................................................. 12 4.1.3 Test Setup .......................................................................................................................................... 13 4.1.4 Test Results ....................................................................................................................................... 14 4.2 Frequency Stability Measurement .................................................................................................... 16 4.2.1 Limits of Frequency Stabiliity Measurement ..................................................................................... 16 4.2.2 Test Procedure .................................................................................................................................. 16 4.2.3 Test Setup .......................................................................................................................................... 16 4.2.4 Test Results ....................................................................................................................................... 17 4.3 Occupied Bandwidth Measurement .................................................................................................. 18 4.3.1 Test Procedure .................................................................................................................................. 18 4.3.2 Test Setup .......................................................................................................................................... 18 4.3.3 Test Result .......................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST (TEST MODE A) 2 RADIATED EMISSION TEST (TEST MODE B)