S9E-125500Rugged Handheld Computer

Trimble TDC6 GNSS handheld USER GUIDE Model: 125500 Version 1.00 Revision A September 2023 Trimble TDC6 Handheld User Guide | 2 Legal Notices Corporate Office 10368 Westmoor Drive Westminster, CO 80021 USA trimble.com Global technical support To request detailed technical assistance for Trimble solutions, contact [email protected]. Copyright and trademarks © 2023, Trimble Inc. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Inc., registered in the United States and in other countries. Google, Google Play and other marks are trademarks of Google LLC. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Trimble Inc. is under license. All other trademarks are the property of their respective owners. Release Notice This is the September 2023 release (Revision A) of the Trimble TDC6 GNSS handheld documentation. European declaration of conformity Manufacturer’s Name: Trimble Inc. Manufacturer’s Address: 10368 Westmoor Drive, Westminster, CO 80021, USA Declares, under our sole responsibility, that the product: Product Name: TDC6 Model Number: 125500 This product has been determined to be in compliance with the Essential Requirements of the RED Directive 2014/53/EU LVD 2014/35/EU EMC 2014/53/EU RED Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.2 requirements respectively and RoHS Directive 2011/65/EU.An up-to-date Doc is available upon request or can be found at Trimble.com. The products covered by this guide may be operated in all EU member countries (BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE), United Kingdom, Norway, and Switzerland. Information about included radio modules: - Bluetooth radio: BT5.2 dual role (BT/BLE), Frequency band 2402-2480MHz, max RF radiated output power +16.73dBm. - Wi-Fi radio: - 802.11b/g/n, Frequency band 2400-2496 MHz - IEEE802.11a/b/g/n/ac/ax, Frequency bands 2400-2496 MHz , 5180-5825 MHz and 5955~6415 MHz (depending on country) - max RF radiated output power +17.78 dBm. - 2G/3G/4G/5GNR cell radio: - Frequency bands (2G) 850/900/1800/1900 MHz. - Frequency bands (3G) 850/900/1900/2100 MHz. - Frequency bands (4G) FDD B1 (2100) / B2 (1900) / B3 (1800) / B4 (1700) / B5 (850) /B7 (2600) / B8 (900) / B12/B13/B17/B28 (700) / B20 (800 MHz) / B25 (1900 MHz). - Frequency bands (4G) TDD B38 (2600) / B39 (1900) / B40 (2300) / B41 (2500 MHz). - Frequency bands (5GNR) N1/N2/N3/N5/N28/N41/N71/N77/N78/N79, - Max RF radiated output power +31 dBm. Importer of Record Trimble European Regional Fulfillment Center Logistics Manager Trimble Europe B.V. & Trimble International B.V. Industrieweg 187a 5683 CC Best The Netherlands Legal Notices Trimble TDC6 Handheld User Guide | 3 Trimble EC Trimble Germany Am Prime Parc 11 65479 Raunheim Germany CAUTION - Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated and normally restricted to two meters in length. Power supplies approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. Unapproved modifications or operations beyond or in conflict with these instructions for use may void authorization by the authorities to operate the equipment. Frequency bands and Powers a. Frequency band(s) in which the radio equipment operates; Please see above table in” Product Antenna and Gain”. b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates; Please see above table in” Product Antenna and Gain.” Product Antenna and Gain Radio Cat Frequency Antenna Type Max Gain(dBi) ANT0 ANT1 ANT2 ANT3 WWAN LTE/WCDMA/GSM LDS 0.26 WWAN 5G NR LDS 0.3 WLAN 6E 5955~7115MHz LDS -1.14 -1.6 -1.0 WLAN 5G 5180~5825MHz LDS -2.3 0.6 WLAN 2.4G 2412~2472MHz LDS -2.1 0.02 BT 2402~2480 LDS 0.02 Recycling information You should dispose of the device and accessories properly according to local laws and regulations. Because the device contains electronic components, it must be disposed of separately from household waste. When the device reaches its end of life, contact your local Trimble dealer to learn about disposal and recycling options for your area. Recycling in Europe The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For information about recycling Trimble WEEE (Waste Electrical and Electronic Equipment) products that run on electrical power go to http://www.trimble.com/corporate/about_WEEE_ROHS_initiatives.aspx. The ERFC Netherlands will recycle on behalf of Trimble Distributors, conforming to the European Union's WEEE Directive 2002/96/EC, any WEEE supplied to the market by Trimble Inc., their partners and/or subsidiaries. Taiwan – Battery Recycling Requirements The product contains a Lithium-ion battery. Taiwanese regulations require that waste batteries are recycled. 廢電池請回收 Regional compliance Legal Notices Trimble TDC6 Handheld User Guide | 4 Australia and New Zealand This product conforms with the regulatory requirements of the Australian Communications and Media Authority (ACMA) Telecommunications, Radiocommunications and EMC Labelling Notices, thus satisfying the requirements for RCM marking and sale within Australia and New Zealand. Europe This Trimble product has been tested and found to c…

Text truncated - open the document above for the full version.

Trimble Inc. 5475 Kellenburger Rd, Dayton, OH 45424 United States Date: 2023-10-12 FCC ID: S9E-125500 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Trimble Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Trimble Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------- Katherine Allen Trimble Inc. TEL: 541-750-9385 E-mail: [email protected]

Trimble Inc. 5475 Kellenburger Rd, Dayton, OH 45424 United States U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: Trimble Inc. FRN: 0013284146 Grantee Code or FCC ID:S9E Contact Name: Katherine Allen Street Address: 5475 Kellenburger Rd. City/Province/Zip: Dayton / Ohio / 45424 Telephone No: 541-750-9385 Email:[email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date:2023-10-12 Signed by (printed name): Katherine Allen

Trimble Inc. 5475 Kellenburger Rd., Dayton, Ohio, United States, 45424 Declaration letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement Date: 2023-10-27 FCC ID: S9E-125500 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! Sincerely yours, ----------------------------------- Katherine Allen Trimble Inc. TEL: 541-745-9385 E-mail: [email protected]

Trimble Inc. 5475 Kellenburger Rd, Dayton, OH 45424 United States Date: 2023-10-12 FCC ID: S9E-125500 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description Part list Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Katherine Allen Trimble Inc. TEL: 541-750-9385 E-mail: [email protected]

Trimble Inc. 5475 Kellenburger Rd, Dayton, OH 45424 United States Date: 2023-10-12 FCC ID: S9E-125500 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Katherine Allen Trimble Inc. TEL: 541-750-9385 E-mail: [email protected]

Trimble Inc. 5475 Kellenburger Rd., Dayton, Ohio, United States, 45424 Date: 2023-10-02 FCC ID: S9E-125500 AUTHORIZATION LETTER To Whom It May Concern: Trimble Inc. hereby authorizes Trista Tsai / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Trista Tsai / Specialist of BV CPS Taoyuan on Trimble Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Katherin Allen Trimble Inc. TEL: 541-750-9385 E-mail: [email protected]

Label location Rear of Phone Battery FCC label (Inside)

Trimble Spectra

Reference No.: BICM-WTW-P22110528 1 of 13 CONSTRUCTION PHOTOS OF EUT Brand: Trimble Reference No.: BICM-WTW-P22110528 2 of 13 Reference No.: BICM-WTW-P22110528 3 of 13 Reference No.: BICM-WTW-P22110528 4 of 13 Reference No.: BICM-WTW-P22110528 5 of 13 Reference No.: BICM-WTW-P22110528 6 of 13 Reference No.: BICM-WTW-P22110528 7 of 13 Reference No.: BICM-WTW-P22110528 8 of 13 Reference No.: BICM-WTW-P22110528 9 of 13 Reference No.: BICM-WTW-P22110528 10 of 13 Reference No.: BICM-WTW-P22110528 11 of 13 Reference No.: BICM-WTW-P22110528 12 of 13 Reference No.: BICM-WTW-P22110528 13 of 13

SAR and Power Density Test Report Report Format Version 7.0.0 Page No. : 1 of 48 Report No. : SFBICM-WTW-P22110528 Issued Date : Oct. 23, 2023 SAR and Power Density Test Report Report No. : SFBICM-WTW-P22110528 Applicant : Trimble Inc. Address : 5475 Kellenburger Road, Dayton, Ohio, 45424 Product : Rugged Handheld Computer FCC ID : S9E-125500 Brand : , Model No. : 125500 FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013, IEC TR 63170:2018 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 941225 D01 v03r01, KDB 941225 D05 v02r05, KDB 941225 D07 v01r02 Sample Received Date : Nov. 18, 2022 Date of Testing : Apr. 17, 2023 ~ Oct. 6, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Lena Wang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR and Power Density Test Report Report Format Version 7.0.0 Page No. : 2 of 48 Report No. : SFBICM-WTW-P22110528 Issued Date : Oct. 23, 2023 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR and Power Density Value ...................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 7 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 3.2 SPEAG DASY6 System ............................................................................................................................................... 7 3.2.1 Robot.................................................................................................................................................................. 8 3.2.2 Probes ................................................................................................................................................................ 9 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 9 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 11 3.2.7 Power Source ................................................................................................................................................... 11 3.2.8 Tissue Simulating Liquids ................................................................................................................................. 12 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ...........................…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S01 System Check_H835_230425 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 835 10.29 0.942 43.4 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Apr-25 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-25 2023-04-25 psSAR1g [W/kg] 0.481 0.480 psSAR10g [W/kg] 0.317 0.316 Power Drift [dB] 0.03 0.03 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S02 System Check_H1900_230425 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 1900 8.41 1.48 41.1 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2122 H06T27N9 , 2023-Apr-25 EX3DV4 - SN7696, 2023-01-25 DAE3 Sn579, 2022-06-01 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-25 2023-04-25 psSAR1g [W/kg] 1.89 1.92 psSAR10g [W/kg] 0.989 1.02 Power Drift [dB] -0.01 0.01 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S03 System Check_H1900_230428 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 1900 7.65 1.48 41.0 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1982 H06T27N6 , 2023-Apr-28 EX3DV4 - SN7797, 2022-12-12 DAE4 Sn1590, 2022-09-022 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-28 2023-04-28 psSAR1g [W/kg] 1.94 1.88 psSAR10g [W/kg] 0.996 1.02 Power Drift [dB] -0.01 0.01 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S04 System Check_H835_230504 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 835 10.1 0.982 42.7 Hardware Setu0070 Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2121 H06T27N7 , 2023-May-04 EX3DV4 - SN7472, 2022-05-27 DAE4 Sn1698, 2022-11-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-04 2023-05-04 psSAR1g [W/kg] 0.467 0.465 psSAR10g [W/kg] 0.316 0.312 Power Drift [dB] 0.05 0.13 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S05 System Check_H1900_230504 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 1900 8.44 1.45 40.1 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 2121 H06T27N7 , 2023-May-04 EX3DV4 - SN7472, 2022-05-27 DAE4 Sn1698, 2022-11-17 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-05-04 2023-05-04 psSAR1g [W/kg] 1.89 1.87 psSAR10g [W/kg] 0.989 0.994 Power Drift [dB] -0.01 0.01 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S06 System Check_H1750_230428 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Phone Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Channel Number Conversion Factor TSL Conductivity [S/m] TSL Permittivity Flat, , 1750 8.03 1.37 42.0 Hardware Setup Phantom TSL, Measured Date Probe, Calibration Date DAE, Calibration Date Twin-SAM V8.0 (30deg probe tilt) - 1982 H06T27N6 , 2023-Apr-28 EX3DV4 - SN7797, 2022-12-12 DAE4 Sn1590, 2022-09-22 Scan Setup Area Scan Zoom Scan Grid Extents [mm] 45.0 x 90.0 36.0 x 36.0 x 30.0 Grid Steps [mm] 15.0 x 15.0 6.0 x 6.0 x 1.5 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2023-04-28 2023-04-28 psSAR1g [W/kg] 1.73 1.75 psSAR10g [W/kg] 0.929 0.940 Power Drift [dB] 0.03 0.03 Report No.: SFBICM-WTW-P22110528 Plots of System Verification Measurement Report S07 System Check_H835_230428 Device under Test Properties Model, Manufacturer Dimensions [mm] IMEI DUT Type Dipole 10.0 x 10.0 x 300.0 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Band Group, UID Frequency [MHz], Chann…

Text truncated - open the document above for the full version.

Appendix Z. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Model：D750V3S/N：1013Measurement Date：2022/8/30 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Result Real Impedance 53.57449.393-4.181±5ΩPASS Imaginary Impedance 0.25760.29900.04±5ΩPASS Return Loss -29.219-27.514-5.84%±20%PASS 750Free Space 750 MHz，Free Space Annual Confirmation of SAR Reference Dipole Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Model：D835V2S/N：4d121Measurement Date：2022/8/30 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Result Real Impedance 51.40555.1573.75±5ΩPASS Imaginary Impedance -3.5486-3.44470.10±5ΩPASS Return Loss -28.493-23.391-17.91%±20%PASS 835Free Space 835 MHz，Free Space Annual Confirmation of SAR Reference Dipole Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Annual Confirmation of SAR Reference Dipole Model：D1750V2S/N：1055Measurement Date： 2022/09/01 Frequency (MHz) TypeItem Previous Measurement Annual Check Deviation Accepted Tolerance Result Return Loss -33.813 -30.705 -9.19% ±20%PASS Imaginary Impedance 48.731 48.557 -0.17±5ΩPASS Real Impedance -1.5632 2.0160 3.58±5ΩPASS 1750 MHz，Free Space 1750 Free Space Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Model：D2600V2S/N：1020Measurement Date：2022/8/16 Frequency (MHz) Type Item Previous Measurement Annual Check Deviation Accepted Tolerance Result Real Impedance 47.75644.227-3.529±5ΩPASS Imaginary Impedance -4.8576-5.7699-0.91±5ΩPASS Return Loss -25.245-26.5175.04%±20%PASS 2600 Free Space 2600 MHz，Free Space Annual Confirmation of SAR Reference Dipole Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528

Report No.: SFBICM-WTW-P22110528 Annual Confirmation of SAR Reference Dipole Model：D6.5GHzV2S/N：1008Measurement Date： 2022/09/23 Frequency (MHz) TypeItem Previous Measurement Annual Check Deviation Accepted Tolerance Result Return Loss -22.331 -22.312 -0.08% ±20%PASS Imaginary Impedance 51.894 50.673 -1.22±5ΩPASS Real Impedance -7.5795 -7.4940 0.09±5ΩPASS 1750 MHz，Free Space 6500 Free Space Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528 Report No.: SFBICM-WTW-P22110528

Report No.: RFBICM-WTW-P22110528-8 Page No. 1/ 13Report Format Version: 6.1.1 CBSD-EUD Test Report Report No.:RFBICM-WTW-P22110528-8 FCC ID:S9E-125500 Test Model:125500 Received Date:2022/11/18 Test Date:2023/9/20 Issued Date:2023/10/31 Applicant:Trimble Inc. Address:5475 Kellenburger Road, Dayton, Ohio, 45424 Issued By:Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address:No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location:No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended …

Text truncated - open the document above for the full version.