SDL-PD38XR01LASER RANGEMETER

*228790* 228790 Hilti Corporation FL-9494 Schaan Tel.: +423 / 234 21 11 Fax: +423 / 234 29 65 www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan W 3153 1105 00-Pos. 4 1 Printed in Liechtenstein © 2005 Right of technical and programme changes reserved S. E. & O. 228790 / A PD 38 Bedienungsanleitungde Operating instructionsen
5 2 4 9 6 3 1 7 12 8 10 10 11 11 11 13 PDAW 80-1  PDA 50 PDA 60 PDA 61 PDA 62 PDA 70 PDAW 80 / 81-3 PDAW 81-1 PDAW 80 / 81-2 PDAW 80 / 81-1 PDA 81 PDA 80 PUA 60 PDA 66 PD 38 laser range meterContents It is essential that the operating instructions are read before the range meter is used the first time. Always keep these operating instruc- tions together with the range meter. Ensure that the operating instructions are with the range meter when it is given to other persons. Component parts

Laser exit aperture Control panel Receiving lens Plastic casing Horizontal bubble Vertical bubble Battery compartment Folding spike Graphic display showing operating status Metal contact points for precise meas- urement (3x rear) Metal supports for precise measure- ment (3x underneath) Optical sight Side measure button Contents 1.General information. . . . . . . . . . 3 1.1Safety notices and their meaning . . . . . . . . . . . . . . . . . . . 3 1.2Pictograms . . . . . . . . . . . . . . . . . 3 1.3Location of identification data on the range meter . . . . . . . . . . . . . 3 2.Description. . . . . . . . . . . . . . . . . 4 2.1Intended use . . . . . . . . . . . . . . . . 4 2.2Items supplied . . . . . . . . . . . . . . 4 2.3Measuring principle . . . . . . . . . . 4 2.4Range meter functions . . . . . . . . 4 2.4.1General range meter functions . . 4 2.4.2PD 38 side measure button . . . . 4 2.4.3PD 38 optical sight . . . . . . . . . . . 4 2.5Bluetooth . . . . . . . . . . . . . . . . . . 4 3.Tools and accessories. . . . . . . . 6 3.1PDA 50 target plate. . . . . . . . . . . 6 3.2PDA 80/81charging kits . . . . . . . 6 3.3PDAW 80-1 mains adapter . . . . . 6 3.4PDAW 80/81-2 car battery plug. . . . . . . . . . . . . . . . . . . . . . . 7 3.5PDAW 80/81-1 charging adapter . 7 3.6PDAW 80/81-3 battery pack . . . . 7 3.7PDAW 81-1 mains adapter . . . . . 7 3.8PUA 60 laser visibility glasses . . 7 3.9PDA 62 belt clip . . . . . . . . . . . . . 7 3.10PDA 70 measuring extension . . 7 3.11PDA 66 Holder . . . . . . . . . . . . . . 7 4.Technical data. . . . . . . . . . . . . . 8 5.Safety information. . . . . . . . . . . 9 5.1Basic safety information . . . . . . . 9 5.2Misuse . . . . . . . . . . . . . . . . . . . . 9 5.3General safety precautions . . . . . 9 5.4Proper organization of workplace . . . . . . . . . . . . . . . . . 10 5.4.1Electromagnetic compatibility . . 10 5.4.2Laser classification . . . . . . . . . . 10 5.4.3Transport . . . . . . . . . . . . . . . . . 10 1 2 Contents 6.Getting started. . . . . . . . . . . . . 11 6.1Inserting alkaline/rechargeable batteries . . . . . . . . . . . . . . . . . . 11 6.2Battery charging . . . . . . . . . . . . 11 6.2.1Standard charging of batteries . 11 6.2.2Fast battery charging . . . . . . . . 12 6.3Switching the range meter on and off . . . . . . . . . . . . . . . . . 12 6.3.1Initial distance measurement . . 12 6.4Settings. . . . . . . . . . . . . . . . . . . 13 6.4.1Activating the settings menu . . 13 6.4.2Menu/Beep . . . . . . . . . . . . . . . . 13 6.4.3Menu/Units . . . . . . . . . . . . . . . . 13 6.4.4Switching Bluetooth on and off . 13 6.4.5Terminating the menu . . . . . . . . 13 7.PD 38 operation. . . . . . . . . . . . 14 7.1General controls . . . . . . . . . . . . 14 7.1.1Control panel . . . . . . . . . . . . . . 14 7.1.2On/off and control buttons . . . . 14 7.1.3Measure buttons . . . . . . . . . . . . 14 7.1.4Function buttons . . . . . . . . . . . . 14 7.2Display . . . . . . . . . . . . . . . . . . . 15 7.2.1Symbols displayed . . . . . . . . . . 15 7.2.2Display illumination . . . . . . . . . 16 7.3Optical sight . . . . . . . . . . . . . . . 16 7.4Measuring distances . . . . . . . . . 17 7.4.1Measuring references . . . . . . . . 17 7.4.2Measuring distances step by step . . . . . . . . . . . . . . . . . . . . . . 17 7.4.3Measurement mode . . . . . . . . . 18 7.4.4Measuring from corners . . . . . . 19 7.4.5Measuring with the aid of target objects . . . . . . . . . . . . . . . . . . . 19 7.4.6Measuring in bright conditions . . 19 7.4.7Taking measurements to rough surfaces . . . . . . . . . . . . . . . . . . 20 7.4.8Taking measurements to round or inclined surfaces . . . . . . . . . 20 7.4.9Taking measurements to wet or shiny surfaces. . . . . . . . . . . . . . 20 7.4.10 Taking measurements to transparent surfaces . . . . . . . . . 20 7.4.11 Measuring ranges . . . . . . . . . . . 20 8.Applications and functions. . . 21 8.1Measurement data memory . . . 21 8.1.1Saving measurements . . . . . . . 21 8.1.2Historical data memory. . . . . . . 21 8.2Area measurement . . . . . . . . . . 21 8.3Volume measurement . . . . . . . . 22 8.4Adding distances . . . . . . . . . . . 23 8.5Subtracting distances . . . . . . . . 23 8.6Setting out . . . . . . . . . . . . . . . . 24 9.Measuring using a Bluetooth connection. . . . . . . . . . . . . . . . 25 9.1Setting up PDA/MDA . . . . . . . . 25 9.2Establishing connection between PD 38 and PDA/MDA . . . . . . . . 25 9.3Measuring using Bluetooth connection to PDA/MDA . . . . . . 26 10.PDA/MDA Windows CE with Hilti PD 38 application. . . . . . 27 11.Data transfer from PDA/MDA to PC. . . . . . . . . . . . . . . . . . . . . 28 12.Calibration and adjustment. . . 29 12.1Calibration. . . . . . . . . . . . . . . . . 29 12.2Adjustment . . . . . . . . . . . . . . . . 30 12.3Hilti calibration service . . . . . . . 30 13.Care and maintenance. . . . . . . 30 13.1Cleaning and drying . . . . . . . . . 30 13.2Storage . . . . . . . . . . . . . . . . . . . 30 13.3Transportation. . . . . . . . . . . . . . 30 14.Disposal. . . . . . . . . . . . . . . . . . 31 15.Warranty. . . . . . . . . . . . . . . . . . 31 16.FCC statement (ap…

Text truncated - open the document above for the full version.

FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 5 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 3 EQUIPMENT UNDER TEST 3.1 Photo documentation of the EuT Laser Rangemeter T30241-00-00XF External Photo Front view Laser Rangemeter T30241-00-00XF External Photo Rear view FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 6 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF External Photo Side view of PCB

CLASS II LASER PRODUCT 620-690nm/0.95mW max. STARE INTO BEAM LASER RADIATION - DO NOT 2 1/4 s 319876 A/05.05 AVOID EXPOSURE Laser radiation is emitted from this aperture Hilti = registered trademark of Hilti Corporation, Schaan, LI Type: PD 38 Made in Germany DIN EN 60825-1:2003 FCC ID: SDL-PD38XR01 IC: 5228A-PD38XR01 This device complies with Part 15 of the FCC Rules and RSS-210 of IC. N4025 PD 38 100% =X 31% 72% Schrift Helvetica Neue Heavy Extended FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 5 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 3 EQUIPMENT UNDER TEST 3.1 Photo documentation of the EuT Laser Rangemeter T30241-00-00XF External Photo Front view Laser Rangemeter T30241-00-00XF External Photo Rear view

FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 7 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Open view FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 8 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 9 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB Laser Rangemeter T30241-00-00XF Internal Photo Rear view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 10 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 11 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Rear view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 12 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of BT module

FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 1 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 EMI -- T E S T R E P O R T Test Report No. : T30241-00-00XF January 10, 2006 ______________________________________________________________________________________________ Date of issue Type / Model Name : PD38 Product Description : Laser Rangemeter Applicant : Hilti Corporation Address : Feldkircherstrasse 100 FL-9494 Schaan, Principality of Liechtenstein Manufacturer : HILLOS GmbH Address : Prüssingstraße 41 D-07745 Jena Licence holder : Hilti Corporation Address : Feldkircherstrasse 100 FL-9494 Schaan, Principality of Liechtenstein Test Result according to the standards listed in clause 1 test standards: POSITIVE The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test DAT-P-207/05-00 laboratory. FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 2 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Contents 1 TEST STANDARDS 3 2 SUMMARY 4 3 EQUIPMENT UNDER TEST 5 3.1 PHOTO DOCUMENTATION OF THE EUT 5 3.3 POWER SUPPLY SYSTEM UTILISED 13 3.4 SHORT DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) 13 4 TEST ENVIRONMENT 14 4.1 ADDRESS OF THE TEST LABORATORY 14 4.2 ENVIRONMENTAL CONDITIONS 14 4.3 STATEMENT OF THE MEASUREMENT UNCERTAINTY 14 4.4 MEASUREMENT PROTOCOL FOR FCC, VCCI AND AUSTEL 14 5 TEST CONDITIONS AND RESULTS 16 5.1 CONDUCTED EMISSIONS 16 5.2 MAXIMUM PEAK OUTPUT POWER 22 5.3 RADIATED EMISSIONS (ELECTRIC FIELD) 9 KHZ – 40 GHZ 25 5.4 SPURIOUS RF CONDUCTED EMISSION 34 5.5 20 DB BANDWIDTH 36 5.6 BAND EDGE TEST 41 5.8 TIME OF OCCUPANCY (DWELL TIME) 45 5.9 CHANNEL SEPARATION TEST 49 5.10 QUANTITY OF HOPPING CHANNEL TEST 52 5.11 ANTENNA APPLICATIONS 57 5.12 RECEIVER CONDUCTED DISTURBANCES 0.15 - 30 MHZ 58 5.13 RECEIVER RADIATED EMISSIONS (ELECTRIC FIELD) 9 KHZ - 40 GHZ 59 6 USED TEST EQUIPMENT AND ACCESSORIES 65 FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 3 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 1 TEST STANDARDS The tests were performed according to following standards: FCC Rules and Regulations Part 15 Subpart C - Intentional Radiators (October 01, 2004) Part 15, Subpart C, Section 15.35(c) Correction for Pulse Operation (Duty Cycle) Part 15, Subpart C, Section 15.207(a) AC Line conducted emissions Part 15, Subpart C, Section 15.209(a) Radiated emissions, general requirements Part 15, Subpart C, Section 15.247(c) Radiated emissions, outside the used frequency band Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.247(1)(iii) Bandwidth requirement Part 15, Subpart C, Section 15.247(b)(1) Maximum Peak output Power of intentional radiator FCC Rules and Regulations Part 15 Subpart B - Unintentional Radiators (October 01, 2004) Part 15, Subpart B, Section 15.107(a) AC Line conducted emissions Part 15, Subpart B, Section 15.109(a) Radiated emissions, general requirements FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 4 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 2 SUMMARY GENERAL REMARKS: The frequency range was scanned from 9 kHz to 25000 MHz. All emissions not reported in this test report were more than 10 dB below the specified limit. FINAL ASSESSMENT: The equipment under test fulfills the EMI requirements cited in clause 1 test standards. Date of receipt of test sample : acc. to storage records Testing commenced on : September 21, 2005 Testing concluded on : January 05, 2006 Checked by: Tested by: Klaus Gegenfurtner Dipl.-Ing.(FH) Manager: Radio Group Fischer Xaver FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 5 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 3 EQUIPMENT UNDER TEST 3.1 Photo documentation of the EuT Laser Rangemeter T30241-00-00XF External Photo Front view Laser Rangemeter T30241-00-00XF External Photo Rear view FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 6 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF External Photo Side view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 7 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Open view FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 8 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 9 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB Laser Rangemeter T30241-00-00XF Internal Photo Rear view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 10 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Front view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 11 of 65 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Laser Rangemeter T30241-00-00XF Internal Photo Rear view of PCB FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 12 of 65 Oh…

Text truncated - open the document above for the full version.

FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 16 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Measurement are made in both the horizontal and vertical planes of polarization in a fully anechoic room using a spectrum analyzer with the detector function set to peak and resolution as well as video bandwith set to 1 MHz. All tests are performed at a test-distance of 3 meters. Hand-held or body-worn devices are rotated through three orthogonal axes to determine which attitude and configuration procedure the highest emission relative the limit and therefore shall be used for final testing. During the tests the EUT is rotated all around to find the maximum levels of emissions. The cables and equipment were placed and moved within the range of position likely to find their maximum emissions. When the EuT is larger than the beamwidth of the measuring antenna, the measurement antenna will be moved over the surfaces for the four sides or the test distance will be reduced to demonstrate that emissions were at maximum at the limit distance. Analyzer Settings: - Detector: Max hold - RBW: greater than 20 dB Bandwidth - VBW: ≥ RBW - Sweep Time: Coupled 5.2.3 Photo documentation of the test set-up FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 18 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 5.3 Radiated emissions (electric field) 9 kHz – 40 GHz For test instruments and accessories used see section 6 Part SER1, SER 2, SER 3. 5.3.1 Description of the test location Test location: OATS1 Anechoic Chamber A2 Test distance: 3 metres 5.3.2 Photo documentation of the test set-up FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 19 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 20 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 29 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 5.5 20 dB Bandwidth For test instruments and accessories used see section 6 Part MB. 5.5.1 Description of the test location Test location: AREA4 5.5.2 Photo documentation of the test set-up 5.5.3 Description of Measurement The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio of -20 dB. The reference level is the level of the highest amplitude signal observed from the transmitter at either the fundamental frequency or the first-order modulation products in all typical modes of operation, including the unmodulated carrier, even if atypical. The resolution bandwidth of measuring instrument was set to a value as shown in the folloing table below according to ANSI C63.4-2003. Fundamental frequency Minimum resolution bandwidth 9 kHz to 30 MHz 1kHz 30 to 1000 MHz 10 kHz 1000 MHz to 40 GHz 100 kHz 5.5.4 Test result Channel Frequency [MHz] 20 dB Bandwidth [kHz] 2402 870 2441 864 2480 856 FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 34 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 5.6 Band edge test For test instruments and accessories used see section 6 Part MB. 5.6.1 Description of the test location Test location: AREA4 5.6.2 Photo documentation of the test set-up 5.6.3 Description of Measurement The EuT was connected to the spectrum analyzer with a suitable attenuator. The span of the spectrum analyzer was set wide enough to capture the peak level of the emission operating on the channel closest to the bandedge, as well as any modulation products which fall outside of the authorized band of operation. The highest amplitude appearing on sprectal display was measured and it was set as the reference level for the emission mask. It was allowed the trace to stabilize and after then it was set the emission mask on the reference level to show the compliance with the bandedge requirements. Further settings on the spectrum analyzer: RBW: ≥ 1% of the span VBW: ≥ RBW Sweep: Auto Detecter function: Peak 5.6.4 Test result Frequency [MHz] Peak Power Output [dBm] Spurious emission read value [dBm] Result of Band edge [dBc] Band edge LIMIT [dBc] < 2400 -40,77 -77,39 36,62 ≥ 20 > 2483,5 -50,44 -80,62 30,18 ≥ 20 FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 38 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Rev. No. 1.1 Time of occupancy (Dwell Time) For test instruments and accessories used see section 6 Part DC. 5.8.1 Description of the test location Test location: AREA4 5.8.2 Photo documentation of the test set-up 5.8.3 Test result Channel frequency [MHz] Pulse Time [μs] Bursts (in 1 second) Time of occupancy (Dwell time) [ms] Avarage time of Occupancy LIMIT [ms] 2441 106,96 100 337,99 400 Limit according to FCC Subpart 15.247 (1)(iii) Frequency hopping systems shall be used at least 15 non-overlapping channels. The average time of occupancy on any channel shall no be greater than 0.4 seconds multiplied by the number of hopping channels employed. Frequency hopping systems which use fewer than 75 hopping frequencies may employ intelligent hopping techniques to avoid interference to other transmissions. Frequency hopping systems may avoid or suppress transmissions on a particular hopping frequency provided that a minimum or 15 non-overlapping channels are used. The requirements are FULFILLED. Remarks: For detailed test result please refer to following test protocol. FCC ID: SDL-PD38XR01 mikes-testingpartners gmbh File No. T30241-00-00XF, page 43 of 59 Ohmstrasse 2-4 x 94342 Strasskirchen Tel.:+49(0)9424-94810 x Fax:+49(0)9424-9481240 Re…

Text truncated - open the document above for the full version.